My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
(core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle another problem that I tell him.
I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?

baltwo wrote:
Can't recall which I used to do the dynamic repartitioning.
I'm betting that it was originally Partitioned with Snow Leopard.
As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition.

Similar Messages

Netflix, HBO Go, ABC Tv app on my apple tv take a long time to download my videos and they are choppy, how can I resolve this issue? My apple TV is running off of WiFi in my apartment.

Netflix, HBO Go, ABC TV along with other apple TV apps, take a very long time to download the video and they are choppy when running. My apple TV runs off of WiFi in my apartment. When trying to download updates, it take a long time and then a video screen with "This Update was not Successful. Apple TV couldn't be downloaded at this time. Try again later." What can I do to resolve this issue? I purchased this apple TV in May 2013 new.

That will be an issue with the network
What is your current connection via speedtest.net?
Make sure DNS is set to auto (settings - general -network)
Since you are in an apartment the local wifi network is more prone to interference, try ethernet

Is MacBookPro Upgradeable to Lion since it still ships with Snow Leopard, Is MacBookPro Upgradeable to Lion since it still ships with Snow Leopard

I know that Apple can't preannounce product but I don't understand why the MacBook Pro still ships with Snow Leopard when Lion available and ships with the MacBook Air. Will the MacBook Pro be upgradeable to Lion?

Hi William,
Certainly. For now, though, I'd consider it a bonus that it can boot into/run with either SL or Lion, and Lion is included with any Mac purchased at this time.

Black screen, but still lit

I changed the battery thing a few times from "better performance" to "energy saver” about 4 times over a period of a few hours, it would act like it was switching from the regular screen to the screen saver, but the screen saver never came up. And sometimes this would happen while I was working, so it shouldn't be going to the screen saver at all. The screen would be black, but still lit up. I tried to press buttons to get it to the desktop, but it wouldn't do anything. It was in between asleep and awake. I had to restart it by holding down the power button.
The next day, I changed the battery setting again to try to fix it, but it did this same thing in a shorter amount of time (like 5 times in 5 minutes) The last time, it started "breathing" like it was turning on, but it never actually came on. I had to disconnect the battery to get it to stop.
Then, this morning, it worked fine for a few hours, but again while I was working, it did the same thing. I just restarted it again, but this time it didn't even come on. It went straight to the dark, lit screen. I turned it off and waited awhile. The next time I tried it, it went straight to the dark screen.
So, each time I would try it, it would boot less and less before finally dieing. The whole time the battery was fully charged. It would do it when it was plugged in and when it wasn't. I could hear the computer running.
Any comments? I just don't know what's wrong or what to do. From reading this, I think it would be the failed logic board problems with the battery problems, but like I said, the whole time the battery was fully charged.

I demonstrated this behavior at the Apple Store on 11/2/2013 on my machine and in their test environment. It is easy to reproduce and easy to avoid. I've provided details in this thread: https://discussions.apple.com/thread/5475679.
When the display turns off, it goes through three stages: 1. the screen dims, 2. the screen goes black, 3. the keyboard backlight turns off. Tapping the spacebar or swiping the trackpad anytime during stage 1 will reset the timer. Tapping the keyboard or swiping the trackpad during stage 2 will freeze the black screen with the keyboard lit up. Waiting until stage three to tap the spacebar will wake up the display and everything is fine.
There is less than a one-second window between stages 2 and 3 while the screen is black but the keyboard is still fading that touching the input devices will hang the machine.
This can be reproduced on all mid-2013 MBA's, fresh out of the box, running Mountain Lion or Mavericks. Getting a new machine will not fix it, unless they do a hardware upgrade to fix it.

Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

Black screen but still powers external hard drive

I have two Cinema Displays, not thunderbolt, hooked to a new iMac 27". I took the first one to an Apple Authorised Repair Center and was told that either the logic board or power adapter were shot. The monitor is too old for them to get parts from Apple, so I went and bought a used one from ebay a year ago. Now this monitor just went black while I was working on it. It still powers an external hard drive that appears on my imac, and the light on the front still pulseates.
Both these monitors are the chrome edged 23" HD displays. One is an 07' and the other 11' neither are thunderbolt and neither have a camera. Any ideas. My Apple authorised tech shop said i can have the later one replaced by apple for $670. I don't want to spend that much when I only paid $350 off ebay. If it was just the power adapter I would buy just that, but who knows?

…and I suspect you want some clairvoyant or mind reader to guess all the details and specs of your setup?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

My ipod is showing a black screen, but will charge and make the notification noises. Any ideas on how to fix it

My Ipod touch is just showing a black screen, it still charges and the notifictions still go off because I can hear them. It wont turn onto the lock screen it just stays black. I tryed letting the battery run down and left it for like 24 hours but nothing changed

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

IPhone 6 black screen but works

After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
Any Suggestions?
Many thanks
iPhone 6 running the latest iOS

IIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty.

Black screen but the xorg.log.0 don't have any error

I have a motherboard asus m4a78t-e with ati radeon hd 3300 video chip
and monitor samsung syncmaster 2333 with vga and dvi port I use the dvi port.
I have a strange behavior when ArchLinux start
Firts at all, the grup, next the boot secuence and when start the xorg I have a black screen , at firts I thought that the xorg was the guilty but when I saw the xorg,log.0(I start in console mode) and didn't find any error
I started the xorg and again black screen.
then I pressed crtl-alt-f1 without see nothing in my screen
and logme in at root and wrote "shutdown -h now" and my pc turn off
all this with my screen in black(for me this mean that the pc is not frozen).
I started the pc with x system and black screen, again .
The monitor have vga and dvi port. I use the dvi port. Trying diferent things I discovered that my monitor have a function to change between vga and dvi port and when the x system star with the black screen I press the monitor button, change to vga and then press again to change vdi and buala I have my kdm screen.
The problem is that I must to do this every time that start my pc or restart the x system for example when I logout.
I use the last kernel 2.6.32-ARCH and xf86-video-ati 6.12.4-3 and xorg-server 1.7.3.902-1 I suse hal, don't have xorg.conf file. The problem started after the update the xorg version from 1.6 to 1.7 approximately 2 Months ago.
Any suggestion?

Your "Vout" is a control, not an indicator. Nothing ever writes to it. Your FOR loop just pumps hot air and does not produce any output.
Calling an output of the formula node "Vout" is completely independent and does not magically write to an array control with the same name.
(What's the purpose of "R2" and "R2 2", seems redundant. Also learn about autoindexing. All your terminals belong before the loop, they need to be read only once)
LabVIEW Champion . Do more with less code and in less time .

Sending videos from iphone 4s to pc. Why do I get black screen but have sound

Sending videos from iphone 4s to pc. Why do I get black screen but have sound?

Ok I checked and unchecked the playback via camera yesterday and I got black screen both times.
I could delete the imovie prefs when I go over there today.
I'll try another FW cable but it worked perfectly for importing but what the heck I've got one I'll try it.
Yes camera was set to play and not record.
Plenty of free space -- 131 GB.
I'm pretty sure it's in NTSC DV format, but it's someone else's computer so it could have been changed by someone screwin' around not knowing what they're doing making changes.
PowerMac FW800 (G4), iBook 1.42 G4 SuperDrive Mac OS X (10.4.10)

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

After yesterday's update sent a personal video it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
On my own windows operated laptop when l open the video the start button is crossed through
Is there something l need to do? I can view the videos fine on my iPad ?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Equium A300 - webcam shows black screen but no picture

Equium A300, webcam shows black screen but no picture.
Anyone have isea as to how to regain picture?

Hi
How did you check this?
Did you start the webcam software and checked the picture or do you the internal cam in connection with Skype or similar software?
Did you try to reinstall the webcam software?
No? well then do this

My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

Similar Messages

Maybe you are looking for