My mbp's keyboard is unresponsive. None of the buttons work except for the light for caps lock. The trackpad also doesnt click but i can move the cursor.

My mbp keyboard is unresponsive. I cant type anything but the caps lock key light turns on. My trackpad cursor moves but does not click. Any fix?

Try an SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

Similar Messages

  • Iphone 5 shuts down, as if no power, none of the buttons work.

    IPhone 5 shuts down, as if no power, none of the buttons work.  When plug back the charger cable, the screen immediately comes on and battery shows 40% or 50% or even 80%?  Also, battery drains very fast on both IPhones after recent ipdate of IOS.  Please help.

    Hello there, noviipareni.
    The following Knowledge Base article offers some great steps for troubleshooting issues with unexpected power off:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Additionally this article reviews some recommendations for optimizing your settings for battery life optimization:
    Apple - Batteries - iPhone
    http://www.apple.com/batteries/iphone.html
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Hey Ian
    That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Thank you for using the Apple Support Community.
    -Norm G.

  • My keyboard suddenly stopped responding? I can still click, but I can't scroll or type with any of the keys

    Like it says, I was typing my homework and it just stopped working. Everything else is fine. I can still use the trackpad to move the cursor and click, but I can not scroll or zoom in. I'm mainly concerned about my keyboard though, anything I can do?

    Hi,
    Please [https://support.mozilla.org/en-US/questions/911441 see this.] You may also want to check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]

  • My iPhone 5 just locked up on me.  None of the buttons work and I can't even turn it off.  Any solutions? Thanks.

    My iPhone 5 just locked up on me.  None of the buttons work and I can't even turn it off.  Any solutions?  Thanks.

    Reset the device by pressing and holding the home and power buttons until the white Apple logo appears.

  • My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

    Ouch, doesn't sound good, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Hello, my backspace and enter keys suddenly stopped working. I have done a PRAM reset and used the keyboard viewer to see if the buttons work and they don't.  The PRAM reset didn't work  either

    Dear All,  the backspace and enter keys on my wireless keyboard suddenly stopped working.  Im using OS 10.7.5 and have tried a PRAM reset which didn't work.  I also used the keyboard viewer to see if the keys worked on that but they don't.  This is driving me mad, can anyone please tell me what to do?  It happened just after an update but this could be a coincidence.  Thank you for your time 

    For my computers, though some of them support BlueTooth devices and accessories,
    my preference and economy of standard, is to have wired USB and also use powered
    USB hubs for accessories.
    I've used USB wired keyboards and mouse products; and some I've bought from the
    original owners who had upgraded to BT, and never used the new Apple USB model;
    so I have spares of these on-hand since they seldom fail, but do work when BT won't.
    {A SMC reset should not cause a problem, or seldom has; but can solve some.}
    In my opinion, the wired USB keyboard is an essential accessory, if not a necessary
    primary means of user access on a continuous basis. At least until the wires fail...!

  • None of the buttons work on my phone, cursor only moves up & down or side to side

    Hope someone can help, I have had my BB Curve since Christmas my Partner bought it from someone as an unwanted upgrade. It was brnd new then. I used it on Friday and then 30 mins later it was ringing i tried to answer it nothing would work. The cursor moves from side to side and up and down apart from that nothing works, people can text and call but i cannot open the texts or answer the calls.
    I have completed a software update but it still does not work. None of the buttons, not even the side ones work..any advice ?

    Hi
    The Blackberry is designed to be reset by removing the battery whilst the device is powered-on. Leave the battery out for a minute or 2.
    See if that resolves the problem. If not, then more information will be needed before making suggestions. Please provide as much as you are able of the the following
    Blackberry Model.
    Carrier Name.
    Do you have a Data Plan?
    Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
    Memory for Device and SD Card Options > Memory
    Any error statement or code.
    The Exact nature of problem - the more info the better.
    When this started and whether it started just after an update or new App download and which App/s theme/s download.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • None of my buttons work

    Ok I seriously need help none of my ipod nano buttons work (ive only had the ipod for 2 month and its work for all of 3 days ive just found out how to get help online) i can only reset it when i reset it the menu comes up but i cant scroll or select or anything and that only hppens if its plugged in then the backlight will turn on and the fully charged icon comes up! the hold button is off its charged ive reset itive resored it ive reintalled everything i dont see anymore options please help

    I am having the same problem... I have only had it for 2 days and it kept freezing and I have had to reset. Now it won't do anything!!! I am at a lost as to what to do.

  • I feel like a sucker. I bought an iPAD2 at Fry's where I was told by the salesman that the non 3-G version does have GPS. It does not have GPS.  Is there any way I can use the GPS on my Iphone or Garmin to display in my new mostly unuseable iPad2?

    Is there anyway to input a live, real time  video feed into an iPad2? I would like to use it as a remote monitor for a microscope camera in electrophysiology. Our camera was designed to run off of an older Mac via a firewire connection.  The camera is SUPERB but the computers are dated.  The older  computers connected to an AC line are  electrically noisy.  I have worked out converting the signal from our camera to HDMI and/or USB2 but the iPad2 will not allow any input except via iTunes which is not real time, and requires several steps. Is it possible to use the only mostly useless iPad2 as the excellent portable DC driven display which it is?!!!  How do I get Apple to say anything but IGNORE, IGNORE IGNORE.  This would be a universal application in academics and all I think I need is permission from the iPad2. The original signal was designed for Apple hardware. They can have the patents. HELP?

    AJ Green wrote:
    My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing.  You need to enable location services.
    Your wifi-only iPad does not have GPS. Read the specs for your device.

  • My ipod stopped completely stopped working. none of the buttons work and it wont register on the computer ...hmmmm how do i fix it without spending money for a new one ????

    how the heck can i get my ipod to work ?? apple is getting very sloppy

    autumn.summers wrote:
    how the heck can i get my ipod to work ?? apple is getting very sloppy
    Are you?  If still under warranty or you have Apple Care why not let them deal with it.  Why should you?

  • None of the buttons work and screen won't come on? Won't appear in iTunes either

    The iphone was dropped and the back glass smashed, and the back plate was taken off so battery visable, camera is detached from phone. It won't turn on now not even when put on charge, from the back you can see the back light of the screen but nothing is actually displayed on the screen.
    Won't appear in the iTunes window and a error message comes up something like Eox000085?
    Is it fixable or totally screwed?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • None of my buttons work; did the 5 R's

    I have a 4th generation Nano.  The buttons quit working.  It's charged fully, I've reset it to factory settings, I've reset it by the 6-second pressing of the menu and center buttons, my iMac and iTunes recognizes it, and the lock button when toggled causes the screen to light up.  However, no buttons nor the wheel work. Any ideas?

    If you have reset and restored your iPod nano, it might be a hardware problem at this point.  You can check out the repair prices here:  http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod

  • I updated my ipad3 and now it wont come on. it just shothe itunes logo and none of the button works, it is not responding what do I do?

    Hi

    You are in recovery mode.  Do what your iPad is telling, which is to connect your iPad to your computer via USB and open iTunes.  This link will walk you through the steps, but be advised, it may take several attempts to make it work.
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • WEB UI Status profile TPM transfer to APO

    Hi, We try to upgrade our CRM system from 4.0 to 5.2 at a customer. Now, the following problem came up with the transfer of promotions to APO; We created our own status profile (ZTPM) which we configured in a way so that promotions were transferred t

  • Issue with re-skilling agents in bulk

    We tried to re-skill about 30 agents in bulk and change the competence level at the same time. Uccx took the change but, we noticed that agents were in a ready state even with calls were in the queue. We went back and one by one re-skilled them again

  • SAP Note 350068 - Additional fields in VA05 - Problem

    I've followed the example given in this note on how to add a field to the display output yet I'm still not seeing the customer material number in the layout list. Am I missing something?

  • Adjustment Brushes not working (3.0 & 3.2)

    While processing some images the other night, using the adjustment brushes, burn, 3 large white squares appeared on the image for a few moments (5 seconds or so) before disappearing. Since then, the adjustment brushes have no effect what so ever on m

  • I want to connect different computers these are present in different ?

    I want to connect different computers these are present in different network More on . They are not in local area network. can i use VPN? any suggestion?