My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks
My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks
If the Reset Ian mentioned doesn't work...
Shut down and restart the Mail app...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Mail app from this list.
- Press the home button twice when done.
- Restart the Mail app
Similar Messages
-
On a mac the type tool will not display when i double click on the type button in the layers panel
The type tool will not display. So I can't change text format.
Thank you for your response. I am using PSE version 11, OS 10.9.4.
I figured out the issue. The Text Tool was displayed but it was off the bottom of the screen. I had to resize the window from the bottom to display the Text Tool. To do so I had to move the dock to the left and then learn that by using the Option key it is possible to change window size on both edges.
Problem solved, thank you. -
why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.
I am having the same problem. Did turning off iCloud work? Did you just turn everything off or did you actually delete the account off your iPod?
-
I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??
If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network -
I rented a movie in iTunes and connected my iPad to transfer the movie to the iPad. The rental section will not pop-up and I have confirmed the movie is not an HD movie. Any suggestions on what to do next?
I would ask iTunes Store support for help with this. You may never be able to get the movie to download on your own now.
Go here and then tap on Connecting and downloading, then tap on Movie Rentals. You can have someone contact you, you can chat online or you can get email support. I would opt for the phone call or online chat.
https://getsupport.apple.com/Issues.action -
HT4710 iphoto will not close down when i click on the red X button
iphoto will not close down when i click on the red X button
Right (Command) click on the iPhoto icon in the Dock and see if you can select Quit there or if you get an iPhoto not responding message. If you do get that message you'll have to the the ➙ Force Quit... menu option then figure out why iPhoto is stalled.
OT -
I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Please enter repository schema password:
Securing dbconsole... Failed.
EMKey is misconfigured.Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu -
I have been using Firefoz for several months. It will not start now. I click on the icon and nothing happens. I'm running Windows 7.
Did you reinstall from backups, or www.Mozilla.org?
-
I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?
Use the download version:
Download CS3 products
Mylenium -
The program will not close properly unless I turn off the computer.
The program will not close properly. If I close it and then try to restart it I get a message saying that Firefox is already running.
Even under normal circumstances it takes a few seconds after exiting Firefox before you can launch Firefox again successfully.
But you're right, sometimes a zombie Firefox process lives on, consuming CPU cycles and memory long after all the user interface for it has disappeared. The zombie Firefox process blocks the launch of new ones. It's annoying, but there is a lighter-weight work-around than rebooting. If you key Del while holding down Ctrl and Alt (the old three-finger DOS reboot), either the Windows Task manager will pop up immediately or you can select it from a list of options. In the Windows Task Manager's Processes tab, you should be able to find "firefox.exe" in the Image Name column. (Left-clicking the Image Name column will sort the names alphabetically, and then you can scroll up or down looking for "f".) Left-click on that "firefox.exe" and then left-click the "End Process" box. A warning box should then pop up, asking if you're really sure you want to terminate the process. Answer Yes. Then wait a few seconds for disk activity to die down. Then re-launch Firefox as you would normally. -
Hi, I am trying to link my Ipad to my email address, but I keep getting a message to click on the link to verify the email account is my own, however I am not seeing a link to click on to. Can someone please help me?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
IPad mini retina email notifications will not turn off
I have turned off all notifications, but my iPad Mini still makes an audible alert when an email arrives. Is there another fix for this problem?
Go to your profile page.
Select the Notifications tab clear out anything that shows there.
Go back to your profile
In the Actions box select Preferences
Select the Email Notifications Preferences tab
Set the values as you like
Go back to your profile
In the Actions box select Manage Email Notifications
delete any that show
that should do it -
my daughter ipad mini is frozen. it will not let me swipe. I have rebooted and then restored to factory settings but I am still unable to swipe.
She has had problems with this ipad in the past and told at the reading store, by a pretty rude guy that we needed to buy a new one as it kept switching off. it is only 14 months old and I do not ant to buy a new one if it will only last for this short time. it has been working pretty much ok for the last month since our trip to the store but now it has totally frozen
please can someone help me as I can not afford to buy anotherIf you have restored the device as new, not from a backup and it is still malfunctioning, then you have a hardware problem. The warranty on the device is one year, but if you take it to the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and it is determined there is a hardware fault, then you may qualify for an out of warranty replacement, which is at a reduced price, depending on your location. http://www.apple.com/support/ipad/repair/other/
-
Mail on my iPad verifies my MobileMe email when I enter it in Add Account, but then says we have an invalid ID or password when you launch the Mail App. I have validated that both are entered correctly. Any ideas?
You are not the only one. I got the same message on my iphone within the last hour. However... I just got an email from another support discussion, so maybe it is working again.
-
Firefox was working perfectly earlier today. This evening, when I tried to start Firefox as I usually do by clicking on its icon in the Windows 7 quick start bar there was no resonse. The same thing happens when I click on the application icon in the Windows Firefox programme folder. Is ther any way that this can be fixed easily?
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
Maybe you are looking for
-
My InDesign file keeps failing to export to PDF
I can't understand why my file won't export as a PDF. My printer needs my file to be a PDF.
-
Problems with 10.5.4 and older video games
I have a new MacBook running OS X 10.5.4 and I have a copy of an older video game (Diablo II) that installs fine when the OS X installer is used, but the game always fails to launch. I always get the "this application quit unexpectedly" screen when I
-
Change equipment and functional task list
Hi All, I have a requirment to mass change the equipment and functinal task list data.The upload file has the group, group counter and operation which i have to use has key fields and only one field value needs to be changed. the field value that nee
-
Packing materials that are in batches
Hi, This is Vikrant. I have created a delivery document that contains a material that is manufactured in batches. Now when I go for packing, the quanities to be packed apper batch wise. For example if the total quantity is 20000 but it is manufacture
-
10.3 Server - Where do I find documents referred to in "Getting Started"
Hello, I've recently taken over an xserve running 10.3 Server and am trying to give myself a crash course on it. In the "Getting Started" guide, under the Workgroup Manager section it says "Information about using workgroup manager appears in several