My new (2 weeks old) Macbook Pro, wont send video output signal to beamer... What can I do? I have the adapter to vga but it does not work...
Hi, I have a new MacBook Pro and I dont get video output to a beamer although I have the regular
Mini DisplayPort to VGA Adapter and it works fine with my older MacBook...
Thanks a lot for your tips...
That should work. When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In SystemPreferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
If you also want audio you'll need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable
Similar Messages
-
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
I have a new iphone 6 (64 Gb) that i have had for roughly 2 weeks. Last night i plugged in my charger that came in the box with the phone and plugged it into an outlet that is not used for anything else. My phone suddenly stopped charging and gave me the message that the accessory is not supported. The box of the charger seemed hot at the time. Thinking it was a faulty cord, i borrowed a friends charger today (also the original apple charger) and it would not charge and gave me the same message. I tried three more chargers and still no charge and i got the same message every single time. My phone is now dead and will not turn on. Can someone explain what is wrong? And if i am going to need a new phone and if warranty should cover it since it was not user caused damage
warranty will cover it. Did you try only by changing the power adapter or did you change both cable and power adapter?
if you did the latter, see this page: https://www.apple.com/support/iphone/repair/battery-power/
you'll be able to contact Apple Support from there. -
I am trying to stop pages from being able to automatically reload. Sites such as Drudge Report and now Yahoo News anre reloading before I have a chance to read them and it confuses me due to a disability besides just being annoying. I have found the option in tools-advanced-accessibility and checked it but they still reload. And I did close Firefox and restart.
I am using version 3.6.8 Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.8) Gecko/20100722
ThanksThe Drudge Report site has a script to reload after 3 minutes:
var timer = setInterval("autoRefresh()", 1000 * 60 * 3);
function autoRefresh(){self.location.reload(true);}
The Yahoo page probably has something similar.
You can try NoScript to see if you can block that refresh.
NoScript: https://addons.mozilla.org/firefox/addon/722
http://userscripts.org/scripts/show/13594 - Prevent automatic reload for drudgereport.com -
The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?
The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?
-
since upgrading phone to iOS 5. I have an old macbook pro and it is running snow leopard OS 10.6.8. I have a minimum of 40 recurring events per week, several of which change. I use the information to schedule future appointments based on those changes and it's causeing a major problem to not have the changes sync. Any help would be very much appreciated.
Did you try to replace the calendar info on the phone with the one on your Mac? You can find this option in iTunes/Info pane, Advanced section.
-
I own a new iPad and a MacBook Pro. An Apple store assistant changed my Apple ID on my iPad, and the new ID showed up in the iCloud setting on the iPad. However on my Mac laptop the iCloud still shows my old ID, so there is no synching of documents going on between the iPad and the laptop. What do I do?
On the mac's system preferences: click the iCloud icon, then "sign out" button. After, you can enter the new ID.
-
Replacing my 2 week old Macbook Pro.
i've had my MacBook Pro for about 2 weeks now
within the first week i noticed problems with my display, well lid.
it has bubbles on the top of the lid, the edge of the screen is popped out, and the lid won't close evenly
now, if i go to an Apple Store and tell them my problems with a 2 WEEK OLD MACBOOK PRO,
will they replace my current MacBook Pro? or will they just replace the screen?
and i do have Apple Protection Plan for 3 years..well is it possible for them to fix it there?
oh and how long could that take for them to send it to apple?
sorry if im in anyway pushy or something
its just this is my first macbook pro and i dont want to be going back and forth to the apple store whch is an hour away from me.. thank you
Message was edited by: milem14 -
My 1 week old macbook pro battery is dying.
my 1 week old macbook pro battery is dying. i charged it to 100% then went to bed and this morning it is at 32% when turned on. What the heck?
my light does not flash in sleep mode.
Which means it isn't sleeping. Run the Console and put the computer sleep. Experiement with the sleep command and closing the lid. Does it sleep with the sleep command but not the lid? Does it not sleep in either case. In the Console, by default, you'll see all the messages that are logged. Pay attention to when you close the lid or execute the sleep command and pay attention to the log entries that occur at that time and shortly afterwards. You might find a sleep terminated type message which will give you a clue about why it isn't sleeping.
There are also programs that are known to cause insomnia. At the head of my list are all it one printer software because the drivers often constantly look for an incoming fax or the keypress from the AIO printer console.
One more thing - if you have been putting it to sleep and then disconnecting USB or FireWire devices - that's the problem. -
I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
ikeep getting a message that my start up disc is full and i don't know how to free up space.. also when i o to download some files i am told there is no space left to download i bought this macbook pro used an receiver no discs.. what can i do??
You need to purchase an external drive and start moving some files to it or you can try trashing some files that you no longer need.
Download OmniDiskSweeper and see where your larger files are... you can move them to an external drive or trash them: it's up to you.
I would also begin, since it's obviously don't have backups, a backup scheme or two. See Most commonly used backup methods.
Good luck,
Clinton -
I have an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone
To to http://iforgot.apple.com and sign in with your iCloud ID. A new password will be sent to the associated email address.
It this doesn't work, go to https://getsupport.apple.com ; click 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. -
HT4111 What can I do to have the new Ipad discover plantronics voyager pro headset?
What can I do to have the new Ipad discover plantronics voyager pro headset?
Try this:
Make sure you turn off the voyager ( red light) and then hold the power button until you see the alternating red and blue flashing light that indicates it is discoverable. Then go back to the iPad settings and you should see that it has discovered the voyager. Then select (touch where it says 'voyager') and it should pair. -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Maybe you are looking for
-
Not able to pass parameters to append search help
Hi I have created a new search help, when I am testing it, its working fine. My requirement is to append this search help to an existing search help. The problem is, after appending the parameters are not getting passed through the new search help ta
-
Product updates via API cause release date to be changed
When running product updates via the eCommerce API (Product_UpdateInsert) the release dates for the updated products are being set to 02-Jan-2000. Is this happening for anyone else? This is kind of painful as we have a client who uses the product rel
-
Setting port range for Oracle Listeners
How do I configure MTS to specify which ports the Listener is going use when doing the redirect? I'm setting up a firewall and need to specify the portrange used. Regards, Thorbjorn
-
As a web designer, I want to be able to test my sites against IE 6 and 7. Unfortunately, all I've got to test on besides Macs is my wife's Windows Vista PC, and not even that at the moment since it's in the shop for 2 weeks. (She was really irritated
-
Hi, I have configured UCM with P6 EPPM r8.2. I have gone through the oracle documents to configure the same. Now when ever I am adding a document from content repository it is checked in to UCM with Access level = Private. As a result I am not allowe