Setting port range for Oracle Listeners

How do I configure MTS to specify which ports the Listener is going use when doing the redirect?
I'm setting up a firewall and need to specify the portrange used.
Regards,
Thorbjorn

Not sure I understand your problem. If by "Printed Range" you want to define the pages to print then this is difficult to do. Typically it's something you'd control in the data model since the report may be different each time you run. You could set something up like "print only the first 10 pages" by creating an appropriate format trigger on frame around your entire layout - if you didn't want to data drive this. However, I don't think there's any way to say print only pages 10-12.

Similar Messages

INST-08010: Error in validating the port range for auto port allocation

Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
My Operating System below:
Linux Red Hat 5.9 X86 64bit
My uname -a are below:
Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
My /etc/hosts file are below:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1   localhost.localdomain localhost
10.10.80.19 redhat59
My /etc/sysconfig/network are below:
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=redhat59
GATEWAY=10.174.27.228
My /etc/sysconfig/iptables are below:
# Generated by iptables-save v1.3.5 on Tue Dec 3 17:01:17 2013
*filter
:INPUT ACCEPT [425:33860]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [307:40164]
COMMIT
# Completed on Tue Dec 3 17:01:17 2013
My ifconfig are below:
eth0      Link encap:Ethernet HWaddr 52:54:00:55:9B:C9
          inet addr:10.174.27.233 Bcast:10.174.27.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:110668992 (105.5 MiB) TX bytes:209784134 (200.0 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:257845896 (245.9 MiB) TX bytes:257845896 (245.9 MiB)
my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.174.27.255
HWADDR=52:54:00:55:9B:C9
IPADDR=10.174.27.233
NETMASK=255.255.255.0
NETWORK=10.174.27.0
ONBOOT=yes
Have any suggestion please?
Many Thanks
D

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

[ERROR]:INST-08010: Error in validating the port range for auto port allocation

I am installing OBIEE 11.1.1.7.0 on a linux x86 version. I get the below error when running the installer: [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL. [VALIDATION] [SUGGESTION]:Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL. [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [ERROR]:INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). installation Failed. Exiting installation due to data validation failure. Solution suggested on other post is below: your hosts file have duplicate name that point to two different IP addresses. 10.37.29.1 test1.xyz.com 10.10.10.1 test1.xyz.com But in my case, My host file has different entiries as shown below: 169.36.71.228 usl20027808.am.hedani.net usl20027808 169.36.72.9 usl2002788.am.hedani.net usl2002788 Please suggest!

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

"Error while accessing porting layer for ORACLE database via getSessionId()

Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Actually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

OBI11g intallation issue - Error in validating the port range for auto port

I am using the intaller to install OBIEE 11g on my machine. When I get to step 6, I receive the error messages below. Currently I also have OBIEE 10g on my machine so the ports may be already used.
Does any one know how I can resolve this issue? I previously installed both 10g and 11g on my old laptop but I can't figure out why I'm getting these errors this time.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08010: Error in validating the port range for auto port allocation. At least 9 ports should be free within the range 9700-9999 for the BI System Components.
Ensure that a minimum of 9 ports are free within the range 9700-9999 for auto port allocation to work correctly for the BI System Components.

your hosts file have duplicate name that point to two different IP addresses.
10.37.29.1 test1.xyz.com
10.10.10.1 test1.xyz.com

Error in Setting Auto Start for Oracle DB on Sun Solaris 10

Hi Gurus,
I am trying to set my DB to auto start when server reboots. Fllowing is my setting and the error. The issue is that the DB starts but LISTENER is not running...
Please please help me...
This is what I used for setting the auto start.
Thanks,
Jayant
SETTING:
=======
#!/sbin/sh
#Match ORACLE_HOME with whatever is in ~oracle/.profile!!!
ORACLE_HOME=<whatever is Orcale home is>
case $1 in
start)
su - oracle -c $ORACLE_HOME/bin/dbstart
su - oracle -c "$ORACLE_HOME/bin/lsnrctl start"
exit 0
stop)
su - oracle -c "$ORACLE_HOME/bin/lsnrctl stop"
su - oracle -c $ORACLE_HOME/bin/dbshut
esac
You're not done yet! You now have to dl
ln -s ../init.d/oracle /etc/rc3.d/S95oracle
ln -s ../init.d/oracle /etc/rc0.d/K15oracle
chmod 0755 /etc/init.d/oracle
ERROR:
======
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 02-DEC-2006 10:09:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Solaris Error: 2: No such file or directory
root@zngds1gk #

Bingo.... I got it.
Thanks for your hint about the ./.profile. I was setting env variables in .cshrc file and my default shell for "oracle" user was sh.
Then I changed the default shell for oracle user to csh and viola..... it works.
root@zngds1gk # su - oracle
$ id
uid=100(oracle) gid=101(dba)
$ setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/sh
$ exit
root@zngds1gk # usermod -u 100 -s /bin/csh oracle
root@zngds1gk # su - oracle
zngds1gk%
zngds1gk% setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/csh
zngds1gk% cat .cshrc
umask 022
setenv ORACLE_BASE /space/oracle/app/oracle
setenv ORACLE_SID adm
setenv DISPLAY 47.102.212.108:0.0
setenv ORACLE_HOME /space/oracle/app/oracle/product/10.2.0/Db_2
setenv PATH /space/oracle/app/oracle/product/10.2.0/Db_2/bin:$PATH
And now it works...
Thanks.
~Jayant

Do I need to set Microsoft Driver for Oracle in Windows XP?

Hi,
I need to insert data into Oracle Table from java Code.
I need to use JDBC-ODBC Bridge.
The code is:
import java.sql.Driver;
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.Connection;
import java.sql.DriverPropertyInfo;
import java.util.Enumeration;
import java.util.Properties;
import java.sql.SQLException;
import java.sql.Statement;
public class DriverTest {
String protocol ="jdbc:odbc://wbalud1b.npc.za:1572/ORA8D.NPC.ZA";
String driverClass ="sun.jdbc.odbc.JdbcOdbcDriver";
//Connection conn = DriverManager.getConnection(protocol,"TUTU_CONN","TUTU142");
Connection connection;
Statement statement;
public void initialize() throws SQLException, ClassNotFoundException {
Class.forName(driverClass);
connection = DriverManager.getConnection(protocol);
if(connection!=null)
System.out.print("The Connection is not null now");
public static void main(String args[]) {
DriverTest driverTest = new DriverTest();
try {
driverTest.initialize();
catch(SQLException sqlException) {
while(sqlException !=null)
sqlException.printStackTrace();
sqlException = sqlException.getNextException();
catch(Exception e)
e.printStackTrace();
}I am getting a runtime error.
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name too lon
g
        at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6958)
        at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
        at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3074)
        at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:3
23)
        at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
        at java.sql.DriverManager.getConnection(DriverManager.java:525)
        at java.sql.DriverManager.getConnection(DriverManager.java:193)
        at DriverTest.initialize(DriverTest.java:22)
        at DriverTest.main(DriverTest.java:35)Regards
Taton

Hi,
I am getting runtime Exception:
java.sql.SQLException: No suitable driver
        at java.sql.DriverManager.getConnection(DriverManager.java:545)
        at java.sql.DriverManager.getConnection(DriverManager.java:193)
        at DriverTest.initialize(DriverTest.java:24)
        at DriverTest.main(DriverTest.java:37)with the below code
import java.util.Enumeration;
import java.util.Properties;
import java.sql.SQLException;
import java.sql.Statement;
public class DriverTest {
String protocol ="jdbc:odbc:thin:@wcalqd0b.pwc.ca:1522:ORA9D.PWC.CA";
String driverClass ="oracle.jdbc.driver.OracleDriver";
//Connection conn = DriverManager.getConnection(protocol,"REG_CONN","REG123");
Connection connection;
Statement statement;
public void initialize() throws SQLException, ClassNotFoundException {
Class.forName(driverClass);
connection = DriverManager.getConnection(protocol);
if(connection!=null)
System.out.print("The Connection is not null now");
public static void main(String args[]) {
DriverTest driverTest = new DriverTest();
try {
driverTest.initialize();
catch(SQLException sqlException) {
while(sqlException !=null)
sqlException.printStackTrace();
sqlException = sqlException.getNextException();
catch(Exception e)
e.printStackTrace();
}I have configured the classpath variable as
SET Classpath=.;E:\Oracle\product\10.1.0\Client_1\jdbc\lib\classes12.jar;E:\Oracle\product\10.1.0\Client_1\jdbc\lib\ojdbc14.jar;D:\Program Files\Java\jdk1.5.0_15\bin;E:\Oracle\product\10.1.0\Client_1\bin;E:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;E:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Sun\studio_04Q4\Ent_04Q4\modules\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;
Regards
Taton

How to set the environment for Oracle XE-database.

Hi,
I have a:- lsnrctl command not found,
And when I echo oracle host & path I got:-
[oracle@ddcdevws02 etc]$ echo $ORACLE_HOST
[oracle@ddcdevws02 etc]$ echo $PATH
/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/u02/oracle/bin
Now I know that my environment is not set, but could anyone please assist me how I can set the environmernt ??? I mean commands or detailed instruction step as to what needs to be set where & how, I mean the SID, port, Path ???, I am new to Linux as well as database .
When I see the listener process using this:- ps -ef | grep tnslsnr, this is the output:-
[oracle@ddcdevws02 ~]$ ps -ef | grep tnslsnr
oracle 14727 1 0 14:25 ? 00:00:00 /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr LISTENER -inherit
oracle 22618 21569 0 15:59 pts/2 00:00:00 grep tnslsnr
So does this mean that my Oracle home is "/usr/lib/oracle/xe/app/oracle/product/10.2.0/" ???
Also In the host file under /etc/ directory I have these settings
127.0.0.1 localhost.localdomain localhost
10.201.60.21 ddcdevws02.hddev.healthdialog.com ddcdevws02
I don't know if this is correct or not ? But I doubt I could make any change in the host file, please suggest me.
Thanks
Sam

user8692703 wrote:
I am sorry Ed I reliazed that that was Phirir's suggestion to me, & Yes this is XE-Oracle database .... so the sid name would be "XE" ...?? I am sorry for my stupid questions as I am very new to ths .
I've never worked with XE, but from everything I've seen, that would also be your SID. check the contents of /etc/oratab
And then what other details required after I run this command ". oraenv", can I run this from any directory or some specific location ?
Just like any command, you can run it from anywhere as long as the directory is in your PATH.
But actually, you should be setting this in your profile, so that you just inherit it when you log on to the server. Depending on your OS, that would be either $HOME/.profile or $HOME/.bash_profile. Here are the commands you should have in that file:
export ORACLE_HOME=pathtoyouroraclehomedirectory
export ORACLE_SID=nameofyouroraclesid
export PATH=$ORACLE_HOME/bin:$PATH>
well I have this infor. with me
HTTP port ---> 8080
Port fopr Database ----> 1521
Anythin else required ?

Can not set data range for a numerical control

I want to set the maximum of data range to 5000, but it always went back to default value of 127.
WHy I can not change the data range? Thanka for explanations.
Message Edited by Dejun on 11-14-2007 11:47 PM
Attachments:
datarange.jpg ‏74 KB

So hit the 'Representation' button.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Setting system variables for Oracle Forms at runtime

Hi,
I've read somewhere that a user can set some Oracle Forms system variables
like SYSTEM.MESSAGE_LEVEL, SYSTEM.DATE_THRESHOLD, SYSTEM.EFFECTIVE_DATE, SYSTEM.SUPPRESS_WORKING
at runtime.
Does anyone know how?
I want to use the same fmx file with various settings, so do not want to
hard code any values for these variables.
TIA,
Sam

Frequently I modidied
:system.message_level := 0 let's say.
For other system variables I cannot help you.
Ovidiu

Change port number for Oracle Microsoft Transaction Services - How????

Hi All,
I reasonably new to this DBA role and was doing an install of Oracle 9i on a new server, (only done an Oracle install about 3 times). Our senior DBA was out so when the screen came up asking for the port to use for MTS I couldn't remember if I should take the default (2030) or put something different in there, so I IM'ed our senior DBA and he told me to use 1521, (our listener port), by mistake. So when I finally get Oracle installed and runing I can't use 1521 with the listener as it tells me it is already being used. I know we don't have to use 1521, but I would like to so we are consistent. In order to use 1521 I need to change the port for MTS back to 2030.
I've searched and searched and since we don't use MTS I cannot figure out where to change the port back to 2030. If someone could tell me in simple steps how to change this it would be really really appreciated.
Thanks
Gordon

If operating system is windows then open registry, find oracle under local system/software,then find oracle MTS in right side u will see word "port"
right click and modify its value as req
Ramchandra

Setting Resource limits for Oracle user in 11gR2

HI Friends,
I am using Oracle Database 11g R2 on windows.
My Application connects to the database using a schema (user1). Some times the application user sessions makes the Database usage / CPU/ IO high and affecting the performance of the Database.
I would like to set some Limits on the Resource usage (Database and System resources) for those Application user schema (user1) to avoid the bottleneck on the Database and Server without affecting the usage of the Application on Transactions.
How can i achieve it?
Regards,
DB

839396 wrote:
HI Friends,
I am using Oracle Database 11g R2 on windows.
My Application connects to the database using a schema (user1). Some times the application user sessions makes the Database usage / CPU/ IO high and affecting the performance of the Database.
I would like to set some Limits on the Resource usage (Database and System resources) for those Application user schema (user1) to avoid the bottleneck on the Database and Server without affecting the usage of the Application on Transactions.
How can i achieve it?
Regards,
DBis application 3-tier like below?
EndUser<=>browser<=>WebServer<=>ApplicationServer<=>DatabaseServer

How to set Port Forwarding for video chat with AIM user?

I'm trying to setup video chat between my Mac in the US (with iChat 3.1) and my friend's PC in Japan (with AIM). I need to know what ports needs to be forwarded on my friend's router, and/or on my router.
Right now, when I attempt video chat with my friend (in Japan) at my home network, the invitation only works one way (me -> friend). And when I try to do it at work, it doesn't work at all.
Help appreciated,

Hi,
I am also having a similar problem that perhaps others can help with.
I'm using an iMac G5 with iChat here in the States, and am trying to connect to my parents' PC running AIM 5.5 on Windows XP sp2. To complicate matters, my parents have a Belkin wireless modem/router that they use to connect to the Internet.
Currently, I can text chat with my parents, and send files to them via iChat. However, whenever I try to initiate a video chat, I get an error saying that "Phil Waymouth" (i.e. my computer) isn't responding.
This is where we are at the moment:
- Internal firewall on my G5 is turned off. I can port scan login.oscar.aol.com fine for both TCP and UDP.
- XP firewall on my parent's computer is on, but has UPnP Framework (ports TCP 2869 and UDP 1900) set up as an exception.
- I've gone through the stages on http://portforward.com to set up Port Forwarding on my parents' Belkin router. In addition, we've enable UPnP on the router and restarted it. However, if we use www.myip.dk to get the IP address of one of their computers, and attempt to port scan it, it fails.
It feels like it's still either their router, or some ISP issue that's the problem?
I apologise for re-hashing the same problem, but perhaps someone here will have a lightbulb moment!
Any help is much appreciated,
Phil
iMac G5 Mac OS X (10.4.3)

How I can set ORG_ID context (for Oracle Apps Views) in ODI designer tool?

Hi All,
I want to get data from apps views (like OE_ORDER_HEADER_V) into our data warehouse detination table using ‘Oracle Data Integrator’ tool.
The issue is that when I reverse Oracle Table or Synonym directly, everything works fine i.e. after 'Interface' execution, I can see how many rows imported into destination table from this source Oracle table/synonym.
But when I use Apps view as a source then 'Interface' executes fine with ‘no error’ but NO rows imports to the destination table.
I believe, the only difference is that I am not able to set Org_Id before executing ODI interface so it is not picking the data.
Please let me know the steps/instructions to set org_id context on apps view then reverse in ODI Designer tool.
Please note that I can set org_id using SQLPlus successfully as given below (and see data using the same Apps view). What to do in ODI designer tool to achieve similar data:
begin
fnd_global.apps_initialize(0, 21623, 660);
mo_global.init('ONT');
end;
-- connect using apps/apps at Vision SQLPlus
-- User_Id -> 0 (<-- SYSADMIN )
-- Responsibility_Id-> 21623 (<-- Order Management Super User )
-- Application_id -> 660 (<-- ONT )
-- select count(*) from oe_order_headers_v where rownum < = 100
I would appreciate your quick help in this.
Thanks in advance.

Set org context in 11i:
===============
The SQL command to set the ORG_ID prior to running a script is:
SQL> execute dbms_application_info.set_client_info(&org_id);
Enter the org_id when prompted.
If using Toad
Begin
fnd_client_info.set_org_context(&org_id);
End;
Set org context in R12
================
The SQL command to set the ORG_ID prior to running a script is:
SQL> exec mo_global.init('AR');
exec mo_global.set_policy_context('S','&org_id');
Enter the org_id when prompted.
The procedure - mo_global.set_policy_context has two parameters
p_access_mode & p_org_id
p_access_mode Description
S In case you want your current session to work against Single ORG_ID
M In case you want your current session to work against multiple ORG_IDs
p_org_id: Only applicable if p_access_mode is passed value of "S"
If using Toad
Begin
mo_global.set_policy_context(‘S’, &org_id);
End;

Setting port exceptions for Windows Firewall via GPO. Is there a limit on the number of exceptions that can be set?

We would like to utilize GPOs to manage our Windows Firewall rule set. We have servers that have different requirements (HL7 connections, other programs) and our doctrine is to only open ports that are going to be used.
We need to be able to audit and enforce these standards, so GPOs seem to make the most sense to me.
The problem I am running into is when I attempt to define multiple Windows Firewall Inbound Port Exceptions. (More than 10) After "Applying and Okaying" I will go to verify the firewall rule-set but I find that quite a few of them are missing. It
seems like I am limited to 8-9 port exceptions per GPO.
I am unable to locate any documentation about this, but we can work around this by creating multiple GPOs.
Has anyone run into this issue before?
Domain Function level: Windows Server 2008
Tho H. Le

> Has anyone run into this issue before?
No, unfortunately. Our main server FW exception GPO contains 44 rules
with port or program exceptions, and it works flawlessly...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Setting port range for Oracle Listeners

Similar Messages

Maybe you are looking for