My new messages still not coming into my mail inbox, my Mac OS X version 10.6.8

Can you please give me the correct detail for Mail Preference/account information both incoming mail server & outgoing mail server.
My new messages still not coming into my mail inbox yet, still not working since yesterday. My sent mails are ok working. What,s number for Port & click on 'use SSL'? 110?
My safari is working Internet.. My ipad2 is still working to receive my new messages via my mail inbox. Something miss in my mail preference? How to fix it?
Regards lisa

Here's my reply to another discussion on the general procedures for setting up a Mail account.
But without the specifications defined by your ISP no one can tell you any more specific details. They should have a web page somewhere (or call them) that supplies all the relevant information:
Incoming (pop) mail server
mail login user name and password
pop port
ssl requirements
authentication type (password?)
Outgoing (smtp) mail server
smtp port
ssl requirements
authentication type (password?)
mail login user name and password

Similar Messages

Messages are not coming into my inbox...

Can anyone help??
My mail activity says I have messages that are being received but they do not seem make it into my inbox. I can access the emails as they are redirected via my pop account, but its a pain.
Does anyone know why messages would suddenly stop arriving?
I am a complete beginner, but I set it up 2 years ago and its been fine till now.
Cheers guys.

Hi SOLVED IT !!
In Mail, i clicked on the gear wheel icon - bottom left of Mail window, clicked on Get Account Info - then on Messages on Server - there were titles of all messages I'd seen on mail2web.com but not downloaded to my Inbox in Mail.
Noticed that there was a message with no title and Sender Unknown, it was 25MB !!! Deleted it, and all fine now !!! Hope this works for you. Not sure if Mail didnt like one mega message or if the Inbox was at capacity - do have 1800 messages in there - its my memory box !! good luck Chris

TS1627 I can receive my mail on my iPod and iPhone, but the messages are not coming into my macbook pro.

When I set up my two email accounts on my new mac, I was receiving mail just fine, and I could check it on any of my 3 devices, and view read or unread between the devices. Now no mail is getting through to my laptop. Any ideas??

Hello annasus77,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Have a nice day,
Mario

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideas

Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes

Text messages are not coming in

apple changed updated my new eamil address in itunes and now my messages are not coming in.help

Hi nancy183,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?

My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?

First, confirm that the iPad is charged and then try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Parser Error Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies,

Dear All,
I have installed Sharepoint Foundation 2010 in my server 2012 R2 machine. and I restore my existing content database backup into new site collections. and I'm trying to browse the site collection in window, the below error shown..
Parser Error
Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies.
<add assembly="Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
I tried to checked the assembly folder having the DLL or not. but its
not available in the C:\Windows\assembly location. and I'm tried to resolved this issue by HOTFIX. but unfortunately, I can't find out the patch file for MOSF 2010 in server 2012 r2.
Please help me on this issue. I'm very new to sharepoint...
Any help will be more appreciated.
Thanks,
Mubarak

Hi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New 4S does not show waiting voice mails? How do I fix?

New 4S does not show waiting voice mails? How do I fix?

What do you mean by waiting voicemails? It tells you a number that includes missing calls new calls voicemail too. If its red circle under messages or the phone it means something is new.

Messages could not be filtered to folder "inbox". How to handle this?

Upon log in and checking for messages I am receiving an alert which basically state" Messages could not be filtered to folder 'inbox'. Verify disk space and write privileges"
Yet I seem to be receiving up to date messages.
What can be done to rectify this.

what is the message exactly.

My new messages still not coming into my mail inbox, my Mac OS X version 10.6.8

Similar Messages

Maybe you are looking for