MY NOKIA 2626 INTERNET CONFIGURATION

My old Nokia 2626 is giving me headache. Though it had been worked upon many times by local repairers. Whenever I press the configuration submenu to check the internet setting, the phone will go off momentarily and power on after some seconds by itself. Also whenever I want to use the phone for internet browsing it will inform me that there is no packet data even when the packet data was set at 'Always on' and the G sign shows on the screen. The internet setting was sent to the phone by my network provider.
Okkenventures

Each time when you insert the sim, the phone gets internet settings from service provider and they get added up every time.
In configuration menu goto default configuration and go on deleting all settings except the one you need.
Later when you press preferred acces point, due to only 2 or 3 access points, the phone wont restart.
Hope this helps.
Srikanth.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Similar Messages

  • Nokia 2626 modem driver

    Plz tell me to download modem(Driver) for nokia 2626 so that I can use internet on my computer

    There isn't a modem driver because the 2626 cannot be used as a modem.
    You need a more advanced model for that feature.

  • Can a Nokia 770 Internet Tablet link with a Sony E...

    Can a Nokia 770 Internet Tablet link with a Sony Ericson K750i as a Modem?

    Did a little more digging and found that quite few people have problems getting this phone to do dialup with anything other than a laptop and SEs own software.
    reason is that SE use some funny command structure, instead of *99# they use *99***1#
    The number 1 there is important, it is the internet profile to use for the dialup, there will probably be several settings in
    Menu->Settings->Connectivity-> Internet Settings -> Internet Profiles ->
    In the phone, and so the number will need to match the one that is configured for Internet access (and not Wap or MMS)
    Also the N770 will need to be configured to send *99***x# (change the x to the number of the connection). I have never used the 770, but looking at the user guide you need to go to
    Control panel > Control panel > Tools > Mobile operator setup wizard
    Create a connection as described on page 27 of the user guide, the settings will be network operator dependent, but the key thing will be to configure the Dial-Up number to be *99***x#

  • Solaris in Logical Partition and Internet Configuration

    Hi !
    I'm really passionate about this unix-solaris thing.
    But these nudges are pulling me back from installing it actually in my hard drive.
    And also there is the Internet configuration problem.
    Problem:1
    I have 2 IDE HDD.
    Primary HDD: 80 GB
    VolumeName-Type-Size
    SystemBoot-Primary/Active/NTFS-100 MB
    Extended Partition:
    VISTA-Logical/NTFS-20 GB
    2008-Logical/NTFS-10 GB
    Data-Logical/NTFS-25 GB
    Music-Logical/NTFS-9.42 GB
    Solaris-Logical/BLANK-10GB .....Blank = No FS. Used Acronis DD10 for it.
    Slave HDD: 40 GB
    Extended Partition:
    XP-Logical/NTFS-10GB
    Fedora9-Logical/ext3-10GB
    SWAP-Logical/SWAP-2GB
    OpenSUSE103-Logical/ext3-15.25 GB
    When I came to HDD configuration stage of installation,
    I selected the pre-selected c0d0(bootdisk) ---Primary HDD/80GB.
    But when I proceeded further it showed me:
    Warning � The initial fdisk information found on the disk
    c0d0 was invalid. Defaulting the entire disk to a Solaris partition.
    So I aborted the installation.
    I tried one more time, by changing the Solaris Blank logical drive to a primary partition.
    But it didn't work.
    Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.
    Please help me on this.
    I'm sick of installing it in VMWare.
    Problem: 2
    How am I supposed to configure my network connection.
    I connect to my ISP using WAN Miniport(PPPOE).
    It allots me dynamic IP(v4).
    I read somewhere DNS should f.root-servers.net and in a magazine, a.solaris.net
    I never came across such a thing in even in linux.
    Problem: 3
    If there is not so �feasible� solution to problem 1, VMWare Workstation comes into play.
    And here too, I need help for configuration of network connection.
    These are the values that I got when I installed Windows XP in the VMWare.
    LAC -Local Area Connection
    LAC � Limited or no connectivity
    IP � 169.254.127.90
    Subnet -255.255.0.0
    Adapter #2 � Bridged
    LAC -2
    IP -192.168.21.132
    Subnet 255.255.255.0
    Gateway -192.168.21.2
    DHCP Srv 192.168.21.254
    DNS/WINS Srv 192.168.21.2
    Adapter#1 � NAT
    LAC � 3
    IP 192.168.209.135
    Subnet 255.255.255.0
    DHCP Srv 192.168.209.254
    DNS � 192.168.209.1
    Adapter #3 � Host Only
    Thanks In Advance !

    Natty wrote:
    Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.This is correct. You need a primary partition (or space for one) for Solaris to install on the drive.
    Problem: 3
    If there is not so “feasible” solution to problem 1, VMWare Workstation comes into play.
    And here too, I need help for configuration of network connection.
    These are the values that I got when I installed Windows XP in the VMWare.
    LAC -Local Area Connection
    LAC – Limited or no connectivity
    IP – 169.254.127.90
    Subnet -255.255.0.0
    Adapter #2 – BridgedThat's an autoconfig IP. It suggests that it tried to do DHCP on the interface and failed. Perhaps you need to configure a hard address.
    LAC -2
    IP -192.168.21.132
    Subnet 255.255.255.0
    Gateway -192.168.21.2
    DHCP Srv 192.168.21.254
    DNS/WINS Srv 192.168.21.2
    Adapter#1 – NATThat's the NAT address. Any problems using it? That's the normal way I use my Solaris VM hosts.
    LAC – 3
    IP 192.168.209.135
    Subnet 255.255.255.0
    DHCP Srv 192.168.209.254
    DNS – 192.168.209.1
    Adapter #3 – Host OnlyAnd that's the host-only adapter. That won't be useful for reaching resources off the VM host.
    Darren

  • I have a macbook 10.6.8  I am getting a internet configuration page when i try to boot safari.  How so i get rid of this page.  Thank you.

    I have a macbook OS X  10.6.8.  I was messing around with java yesterday and now I get a Internet configuration page when I try to launch safari .  How do I get rid of this.  Thank you.

    Can you post a screen shot?

  • Solaris Internet Configuration in VMWare and installation

    Hi !
    I'm really passionate about this unix-solaris thing.
    But these nudges are pulling me back from installing it actually in my hard drive.
    And also there is the Internet configuration problem.
    Problem:1
    I have 2 IDE HDD.
    Primary HDD: 80 GB
    VolumeName-Type-Size
    SystemBoot-Primary/Active/NTFS-100 MB
    Extended Partition:
    VISTA-Logical/NTFS-20 GB
    2008-Logical/NTFS-10 GB
    Data-Logical/NTFS-25 GB
    Music-Logical/NTFS-9.42 GB
    Solaris-Logical/BLANK-10GB .....Blank = No FS. Used Acronis DD10 for it.
    Slave HDD: 40 GB
    Extended Partition:
    XP-Logical/NTFS-10GB
    Fedora9-Logical/ext3-10GB
    SWAP-Logical/SWAP-2GB
    OpenSUSE103-Logical/ext3-15.25 GB
    When I came to HDD configuration stage of installation,
    I selected the pre-selected c0d0(bootdisk) ---Primary HDD/80GB.
    But when I proceeded further it showed me:
    Warning � The initial fdisk information found on the disk
    c0d0 was invalid. Defaulting the entire disk to a Solaris partition.
    So I aborted the installation.
    I tried one more time, by changing the Solaris Blank logical drive to a primary partition.
    But it didn't work.
    Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.
    Please help me on this.
    I'm sick of installing it in VMWare.
    Problem: 2
    How am I supposed to configure my network connection.
    I connect to my ISP using WAN Miniport(PPPOE).
    It allots me dynamic IP(v4).
    I read somewhere DNS should f.root-servers.net and in a magazine, a.solaris.net
    I never came across such a thing in even in linux.
    Problem: 3
    If there is not so �feasible� solution to problem 1, VMWare Workstation comes into play.
    And here too, I need help for configuration of network connection.
    These are the values that I got when I installed Windows XP in the VMWare.
    LAC -Local Area Connection
    LAC � Limited or no connectivity
    IP � 169.254.127.90
    Subnet -255.255.0.0
    Adapter #2 � Bridged
    LAC -2
    IP -192.168.21.132
    Subnet 255.255.255.0
    Gateway -192.168.21.2
    DHCP Srv 192.168.21.254
    DNS/WINS Srv 192.168.21.2
    Adapter#1 � NAT
    LAC � 3
    IP 192.168.209.135
    Subnet 255.255.255.0
    DHCP Srv 192.168.209.254
    DNS � 192.168.209.1
    Adapter #3 � Host Only
    Thanks In Advance !

    Ted-Moran wrote:
    First – Same process runs on both local and global zone.
    On the SPARC unit (SGDSZ-IS) where Ipfilter and the SGD’s are running I have great access to the internet, but I am seeing that when I try to run a browser in a Local Zone the process for mozilla is runing in the Global zone.A process can only be in one zone at a time, but if you run 'ps' in the global zone, it can see processes in all zones.
    In the global zone, you can run something like the following:
    ps -e -o 'pid,zone,args'. That will show the zone associated with any particular process.
    Mozillia process running in both the global and local zones.
    ps–ef | grep moz in both the local and global zone confirms this.
    Global Zone
    # uname -a
    SunOS SGDSZ-IS 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-480R
    # ps -ef | grep moz
    operator 12025 1 0 12:00:53 ? 0:00 /bin/ksh -p /usr/sfw/bin/mozilla[...]
    Local ZONE 2
    # uname -a
    SunOS OPS-SGD-IS 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-480R
    # ps -ef | grep moz
    operator 12025 634 0 12:00:53 ? 0:00 /bin/ksh -p /usr/sfw/bin/mozillaThe global zone doesn't correctly show the parent relationship with all processes within zones.
    Darren

  • My Nokia 2626 FM Radio songs are not being saved

    Respected Sir,
    I have a trouble which needs to be discussed with your kind honor that, How can I be facilitated with saving options of My Nokia 2626 FM Songs.
    Waiting for your kind response.
    Have a good luck & thanx.
    From Sharafat Ali Baloch

    Not sure I undersatnd fully, however are you saying you wish to save songs played via FM radio on your phone? If so I'm afraid you are out of luck as it is just a radio in that sense.

  • "Internet Configuration Leased" -- every 30 minutes??

    That's right. I took a look at my Time Capsule's logs (should be the same as those of the AEBS), and there's a line like this just about every 30 minutes:
    May 29 20:15:53 Severity:5 Internet Configuration leased -- host <67.198.108.106/255.255.248.0> gateway <67.198.111.254> dns <66.90.132.162 66.90.130.10> wins lease <3600> domain <grandenetworks.net>
    Seems excessive (and the host IP is the same every time). Is the lease figure "3600" in seconds? Even so, it shouldn't be happening every 30 minutes, should it?

    After many hours on the phone with my ISP and two repair visits, no change in the DHCP lease. However, I was reading reviews of my ISP on dslreports.com and found a rep who was responding to complaints and giving his email address. I emailed him, and he put me in touch with someone who acknowledged the problem and reconfigured the DHCP server.

  • Installation hang during internet configuration Assitant

    I install Oracle infrastructure on a windows 2003 server. But during internet configuration Assistant, setup can not go on. Click the stop button will not stop the processs. I select identity Management and OracleAS Metadata Repository.
    Has anyone met this problem? I tried to repeat the installation, but eveytime the installation hang at this point.

    Hi,
    3 things you will need to do;
    1- Read the install. manual well
    2- check if you have a full qualified host name ex. server. your domain.com
    3- Check for firewall
    Hear from you,
    Cheers,
    Hamdy

  • Internet configuration fails

    Hello!
    I am new to Archlinux, so I have a problem with my internet configuration. I went step-by-step throw the beginners guide (http://wiki.archlinux.org/index.php/Beg … T_PANIC.21) - I also looked up in the english version and searched via google, but I cant find the solution for myself.
    I started configuring the LAN: (static IP, no dhcp)
    ifconfig
    eth0 inet addr: 192.168.0.9, Bcast: 192.168.0.255, Mask: 255.255.255.0
    /etc/rc.conf
    HOSTNAME="markus-laptop-1"
    lo="lo 127.0.0.1"
    eth0="eth0 192.168.0.9 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(lo eth0)
    gateway="default gw 192.168.0.1"
    ROUTES=(gateway)
    /etc/network-profiles/template
    INTERFACE=eth0
    HOSTNAME=markus-laptop-1
    IFOPTS="192.168.0.9 netmask 255.255.255.0 broadcast 192.168.0.255"
    GATEWAY=192.168.0.1
    DOMAIN=localdomain
    DNS1=192.168.0.1
    /etc/hosts
    127.0.0.1 markus-laptop-1.localdomain localhost markus-laptop-1
    192.168.0.9 markus-laptop-1.localdomain markus-laptop-1
    /etc/resolv.conf
    #search <yourdomain.tld>
    nameserver <192.168.0.1>
    Has anyone an Idea what mistakes I made?
    greets
    Markus
    Last edited by DLD (2008-02-25 15:20:04)

    Please edit your original post and put [SOLVED] in the topic

  • Can I synchronise with the Nokia N80 Internet Edition?

    Is it possible to synchronise Address Book (including photos) and iCal with the Nokia N80 Internet Edition?
    I getting one so I can use it with Truphone for VoIP (which I wouldn't be doing if Apple's iPhone did VoIP!!).

    I got it to sync once but now I get a system error on the N80ie with no further clues. I have tried every combination on two different systems with the same result.

  • Error: Internet configuration incomplete. Please inform administrator.

    Hi Experts,
    I am scheduling a job through sm36. In the spool list recipent i m putting the sap user id and address type as "internet address".
    but when i press enter its showing error as: Internet configuration incomplete. Please inform administrator. It was working fine earlier. but after i did some entry in automatic forwording in SO36 , it has stopped working( but i dont know if this is the reason).
    after that i deleted the entry from automatic forwording through so12. But its still not working. Please resolve.
    Thanks
    Abhishek.

    check T-code SM59 and SCOT and in lotus note server  Exist you Email

  • Nokia 2626 problem

    Hi!
    I have one problem with my second phone Nokia 2626. When I start my phone nokia 2626 apear on the display " car kit icon" but he not exist, is not connected! I can't use the phone, because when I make one call I can't hear my friend at speaker... I need your advices... Give me the solution!
    Thanks.

    hi me manii easily u just go to nokia customer care centre and then your phone will be ok thankxx
    silvi

  • Nokia 2626 connect to pc

    Hi! Is there any posibility to connect 2626 to PC via USB cable? I try it with CA-42 and FBUS cable on Com 4, PC find it as Nokia 2626(RM-291) but cant make any operations.Try different types versions of software (Mobiledit, MobiMB,Oxygen,Nokia PC Suite) its dont work.Maybe there is no way
    to connect 2626 with PC,its bloked? Only GPRS?
    HELP PLEASE!!! Wait for Answer/

    The 2626 is a very basic phone
    If u check this site: http://www.nokia-asia.com/A4415086 , it will show u that the phone does not have any connectivity types for the phone to PC
    This site shows u all compatible data cables for the phone: http://www.nokia-asia.com/A4433037
    Finally if u check http://www.nokia-asia.com/A4482317 , u will see that the PC suite application which allows for transfer of data between phone and PC does NOT support ur phone.
    In short, this phone cannot be connected to the PC in anyway to transfer data
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • Having trouble with the "SIMYO" iPhone 4 internet configuration.. Anybody could help me?

    I am having trouble with the "SIMYO" iPhone 4 internet configuration.. I've been trying to do the configuration 10-15 times now and still, it doesn't work. Anybody could help me please!!

    I don't see SIMYO anywhere on the list of supported carriers: http://support.apple.com/kb/ht1937
    Unless you're talking about a carrier on this list, you're going to have to work it out with them. It's possible their network is just not compatible. They are definitely not a supported carrier.

Maybe you are looking for