My palm tungsten 2 is frozen on the tap the centre of the target page what can I do to restart it
I also have another tungsten 2 that has the same problem
Hi and welcome to the HP Support Community.
I assume you have the target screens because you Hard Reset the device?
If it will not respond to any taps after a Hard Reset, it sounds like the digitizer is faulty. Yes, even tho you have two devices it could be the same hardware issue on both of them. There is a long "stickied" thread near the top of this board which discusses digitizer (touchscreen) problems and their possible resolution.
If none of the solutions there help you out, you can check out Chris Short who can perhaps install a new glass digitizer on your device. He has a good rep and is pretty much the only Palm OS repair solution I know of these days.
Good luck, let us know how it works out for you.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android
Similar Messages
-
i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do
Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button. -
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
When i click on my app it loads a little but then it will go back to the home page what can i do without deleting the app?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I can not update my apps on my iMac all I get is - To update this application, sign in to the account you used to purchase it. what can I do to fix this?
Here is the link to the Mac App Store (MAS) forum:
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
You might want to browse or search through that one and then create a new post there if you can't find an answer; I've heard of posts detailing problems with iLife applications if you either buy a used Mac or wipe/reinstall your OS. I'm not knowledgeable enough about that subject, but somebody there should be. -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
I have what looked like a small bug that ran up and down the screen and then sudenly stopped in center upper half of screen and now appears to be burned in to the inside of the screen, anyone had this probelm before and what can be done about it?
Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.
-
Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?
Finally, this helped me:
https://discussions.apple.com/message/23602871#23602871 -
My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available
Did you flip the switch?
http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg -
I want to restore my data after my pad was reset, but the latest backup was 5 months back. What can I do?
There is nothing that you can do. If you don't have a more recent backup, you can't magically create a current backup now. You can use the 5 month old backup, or simply start all over again. You can download most of your purchased content again as long as you use the same Apple ID that you used to make the purchases.
-
My wife got an ipad air model A1474 (WIFI only) in an airport shopping centre. She needed connectivity what can we do now to correct this mistake as the model is a mismatch for our environment in Nigeria where WIFI is not common
Mifi devices are usually quite small. Think Credit Card size, and maybe slightly thicker. So not really a big device you need to carry around.
In any case if you are still within the 14 day return period you may be able to return it to an Apple retail store. It needs to be an Apple Owned store, not sure Authorized Resellers will let you do it.
Other than that, bob points out, you may want to try to use the iPhone as a hotspot for the iPad. If your Carrier supports it. Like the Mifi device, the iPhone will share its cellular internet connection out to other devices over a Wireless network the iPad can use. -
I retrieved my serial number for Acrobat 8 Standard from Adobe because my system crashed. I went to the downloads and can only retrieve Acrobat 8 Pro. The installer will not take my serial number what can I do?
Hi floyd99,
You can download Acrobat 8 Standard from : https://files.acrobat.com/a/preview/80aa8c58-2951-494e-808a-fb61a6b4aa29
Reagrds,
Rave -
I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.
Hello, terrygav.
I would recommend processing a reinstall of Mavericks.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason H.
Maybe you are looking for
-
This an IPOD I bouth used. Everything esle works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. Any ideas?
-
Recording from Hero open meeting
Deepas blog mentions that recording should be available but is nowhere to be found, any ideas if its supposed to be available or should we just wait and be patient?
-
Is it possible to change the URL of displaytag's sortable function?
Basically, I've got a jsp page with the displaytag code on it such as: <display:table name="result"> <display:column sortable="true" property="title" /> <display:column sortable="true" property="author" /> <display:column sortable="true" property="st
-
HT4718 What do I do if I get a folder with a question mark?
I have a mid 2009 MacBook Pro and just installed a brand new SSD hard drive after my original HD crashed. According to this document and others that I found online, I thought I could boot up while pressing Command+R and follow instructions to instal
-
Embed an .swf, no way to extend a class?
I'm having trouble tying a embeded .swf resource to a custom class to control it. I can use [Embed(source="mypic.jpg")] public class MyPic extends BitmapAsset //code to controll the class goes here. However, no such approach seem to work with .swf. I