My phone sounds like its breaking up when I call. Then when the other person answers all I hear is my voice echoing and all they hear is static
My phone sounds like its breaking up when I call.
Then when the other person answers all I hear is my voice echoing and all they hear is static
Same happens when they call me.
Data over the phone - to Vodaphone - is fine. I can browse. With or without wifi.
My speaker and mic work fine.
I think the fault just developed out of the blue. I called somebody left the phone on the table downstairs the person tried to call me back 11 times and I never heard them. When I tried to call later in the day the phone had an error.
When try to phone my iPhone from the land line the ring tone is perfect but I get the same problem with my iphone just echoing my voice and nothing else - and the landline having loud static and nothing else.
Similar Messages
-
My FaceTime wont connect. When I dial someone and they pick up, it says connecting for a few seconds then says connection ended although neither myself or the other person disconnected the call
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me
iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling -
Since I've done the ios6 update on my ipad2, when I FaceTime someone the person on the other end says all they hear is static and my voice very faintly. Anyone know how to fix this? Thank you.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
Cheers, Tom -
Why does my phone sound like a fax machine when people call me?
hi can anyone help ive had my phone 2 days and its been fine but now when someone calls me i can hear them but they get a sound like screching like a fax is this something i have done thankyou.
Hi jwinn1234,
I'm sorry to hear you are having issues with the sound on your iPhone. The article below will give some basic troubleshooting steps for issues with sound quality:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
I hope this information helps ....
Have a great day!
- Judy -
IMessages don't deliver over WiFi, even when the other person is on the same network
My iPhone 'sends as text message' far more often than others. With full bars of 3G and even on WiFi it just doesn't want to send an iMessage (generally about 1 in 5).
I could understand if the person was dropping out of coverage or had their phone turned off. But I tried an experiment. My girlfriend was complaining about how often my iMessage doesn't work, so on the same WiFi network I tried to send her a message to no avail. The next day I tried the same thing at my house when we were both on my WiFi, didn't work again. Finally, another time out in public, with both iPhones containing full bars of 3G coverage, it still wouldn't work. All three times, five minutes later it would send as text and then begin to work.
Now it does work sometimes, but particularly the first message, and around 1 in 5 after that it just refuses to deliver. Some contacts are more problematic than others, but I figure it's not their fault, as they reckon it only happens with me.
I've tried turning the phone on and off, toggling iMessage, and reseting all settings - and nothing.
It used to be far more reliable when iMessage was first released last year. Now most of my mates with iPhones complain about how long it takes to send me a message.
If anyone has any ideas they would be much appreciated!Hello sakputnam,
Welcome to the HP Support Forums! Let us see if the printer is able to be Pinged. Touch the Wireless button to the right of the display screen on the printer and make note of the I.P address. Try method 1 of 4 here: How to Ping an IP Address. Let me know the results. Connect to the Wireless Direct feature of the printer (just for testing), touch the Wireless Direct icon on the printer's front display (for more information, page #57 of the User Guide), enable with no security. Connect the computer to this network and try printing. If you are able to print when connected to Wireless Direct, an issue is present in the network. Cheers, -
I am trying to text my friend. We are in a group message with another person. They are texting fine. I do not get anything... It ALL goes to my email and i can not send anything back to them. What do i do? (I have the new update too.)
Send messages with your iPhone, iPad, or iPod touch - Apple Support
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Send a group message with your iPhone, iPad, or iPod touch - Apple Support
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support -
HT204380 How come when I make a call on Facetime the other person can't see me?+ but I can see them?
how come when I make a call on Facetime, I can see the person I'm calling but they can't see me?
My guess is one of the two of you has less than a robust, good, fast WiFi connection.
-
when i make a call to anyone, the other person is not able to hear me...
its common problem for iphone try this one ist
go to settings>general>reset>rest all settings phone will turn off and turn on by itself
once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on -
On the iPhone 5/5s, can you hear the other person properly when they are lying down?
When I use the iPhone 5s while lying down in bed, the other person is unable to hear me. When someone who is using the iPhone 5s is lying down in bed, I cannot hear them.
Is this a known issue? Has anyone else experienced this issue? Does anyone know what causes this issue? I actually used to have this same issue with the HTC One, and I was under the impression that it had to do with the accelerometer of smartphones. I do not know of any other difference between smart phones and normal phones.
It's rather annoying, such a basic feature of a PHONE product to be able to talk and hear clearly. Major fail, Apple. For this alone, I may consider switching to another phone.
I have found other comments from iPhone 5 users who have the same issue: http://www.gottabemobile.com/2012/11/29/iphone-5-review/
MICROPHONE
I don’t know if it’s because I have big hands or what, but there many times when people on the other end of the phone can’t understand a thing I’m saying. Specifically, any time I lay down flat on my back, the iPhone 5′s microphones seem to go especially bad. A few times, it’s gotten so bad that the people on the other end of the line hung up because they couldn’t deal with it.Please Apple. Fix this significant bug/defect in your product in your next software update. I know this is a software issue probably related to the Accelerometer detecting that the phone is not upright and then turning off the receiver. Not sure why you would even want to do that.
It is ridiculous that the iPhone cannot perform the most BASIC function of voice calls. After all, that is what you buy the phone for... the texting, internet, applications are all bonus. Phones are used while lying down, upside down, lying on the side, etc. You are basically hurting yourself and your customer base with this significant design flaw. Think about all the couples talking to their significant others when they're lying in bed first thing in the morning or last thing in the evening they are long distance. Think about hospital patients who want to speak with their families. Think about the homeless on the streets with their iPhones lying down calling people to give them money (or not...).
Anyway, you get my point. PLEASE PLEASE PLEASE fix it. I only recently changed from being an Android user to an iPhone user... this is seriously my biggest gripe with your product. -
Since I updated my iPad 2,it makes a shutter sound ( like its taking a picture) every time I close its cover,or even when I just set it down. Any idea on how to fix this? Thank you!
Omg, it worked! Thank you so much --- it's been driving me nuts for weeks now! The sound can get really annoying, lol!
-
I've just got my first mac that I'm just getting used to, but I've been using garageband on my iPhone for about a year with no problems. I've tried recording my guitar on the mac using my iRig which is what I've been using before, and the sound is awful! The volume keeps going up and down and it sounds like its underwater, whereas it was clear as day on my phone. I've tried turning the compressor off and fiddling with different things but nothings working. I'd really appreciate the help if anybody knows what to do. Thanks
Oh, one other spot you might check for level control,
in the Track Info window there is a "volume" control.
This may or may not be enabled ... I kinda' think
for the Mac's Line-In it is enabled
Yes, it is enabled and directly linked to the input volume control in System Prefs. If you have both windows open, you can watch the slider in prefs move as you change the volume in Track Info.
BTW, increasing the various gain controls on my amp does alter the input volume. The change isn't huge, but it is noticeable.
thanks again. -
Audio export sounds like its in a tin cup
I have exported my project multiple times with different settings but each results in sounding like its in a tin cup, or sounds like its from a cheap cell phone. I imported the audio into audition and exported it to my desktop and it sounded fine but if I use premire it ruins the audio. It just started doing this in the past few days and I haven't changed anything that I am aware of. Please any help would be great as this is for my employment!
The audio like you mentioned "sounds like it's from a cheap cell phone" only happens when you cut out the top end and low end frequencies, which clearly looks like a work of an EQ (or any other similar) plugin. Are you sure you heard the exported audio on your desktop and it sounded normal? If yes, then make sure the audio track in premiere doesn't have any effects on it. Also make sure your audio jack's inserted properly. Also listen to something else and see how that sounds just to make sure your speakers/headphones didn't snap.
-
Distorted Audio -- not clipped or in the red but sounds like its both
I have a audio-distorted interview that sounds like its in the red-- but its not and is clean of clipping -- what could be the problem?
cizzler wrote:
One more question-- if I have interviews where the audio peaks above 12 and are also too low to hear in the same clip-- how can I mediate that? Is there an effect that normalizes both without going through with the pen tool and bringing up lows/bringing down highs?
Mmm...some clarity's required here. When you say 'peaks above 12' are you talking about peaks during playback above -12 dB on the Audition meter? If so, there's nothing wrong with that - that's pretty normal. When you say 'too low to hear in the same clip' are you talking about too low to hear it when it's being recorded, or too low to hear afterward when you play it back? If it's peaking at -12 dBFS, you should be able to hear it completely clearly. -
HI my Macbook pro Has a white screen What do i do It Sounds like its overheating
My macbookPro 2012 has a white screen And Sounds like its over Heating And What Do I do when Im swiching computers and I can't start WORD mac 2012 Without entering Product code which I did Not Have When I bought my mac For the first time
I sense that you may have three problems. Would you describe each one individually in detail and wha,t if any thing, you have tried to address them.
Ciao.
Maybe you are looking for
-
Automatic determination of WBS element in MIGO
Dear Friends, I have a requirement as below: When we do reservation for a particular WBS element and do goods issue for a different WBS element, system is not giving any error message. We want to configure automatic determination of WBS element in MI
-
Initial Load of Business Partner not running
Dear SAP CRM gurus, We have been able to perform initial download of Business Partners from ECC into our CRM system. We have done this many times. We do not know what is wrong, but since last week, we are unable to perform initial download of our Bus
-
What I'm trying to do is create a smart playlist that lists all my songs according to when the song was added to my iTunes library, this way I can get easy, quick access to songs I recently added to my iTunes library in reverse chronological order (n
-
Changes in Pur Infor Records Table
Dear All , I need the table for all purchase info record Changes in Prices till Date ?
-
I have a new application assignment and want to give it a try with Flash forms. Can anyone suggest a tutuorial or *gasp* a book that covers flash based forms in CF development?