My printer won't connect to my computer
When ever I try to connect my computer to my printer, it refuses to do so. I have already installed the drivers and all that, but when ever I click "add printer" my printer comes up, I click on it and it still says "no printer selected". Please help!
Never mind I did it
Similar Messages
-
IPod Touch 4th Gen won't connect to my computer, charge or connect to iTunes.
Okay, here is the issue. My computer runs Windows Vista. Ever since I have updated iTunes to 11.0.2, my iPod touch hasn't been able to connect to the computer at all. I don't know if there is any correlation between the update and my issue, but I need someone to be the judge of that. Apple has suggested that you uninstall iTunes, QuickTime, etc. restart the computer and then reinstall them. So I have done that multiple times, and my iPod still won't connect to the computer. My sister's iPod touch, 4th gen just like mine won't connect to iTunes or the computer either. I have spent a lot of time looking up possible solutions, but none of them work at all. I've done everything Apple suggests in troubleshooting and such, but nothing works. I was hoping someone else might be able to give me a solution. One that hopefully does not involve uninstalling and reinstalling Apples programs, which I have done several times.
I have tried all accessable USB ports on my computer, and I have switched between the four different USB cords that we have, so this isn't the issue. My PS Vita will connect to the computer with no issue at all, so it isn't the USB ports either. I can plug my iPod Touch into my PS3 and it will charge the instant I plug either end of the cable in, the same for my sister's. I can plug it into the dock on my mother's alarm clock and it will charge just fine. I'm open to any suggestion, so please help me out here.
-JaySo you tried everything here:
iOS: Device not recognized in iTunes for Windows
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Try connecting to another computer to help determine if you have an iPod or computer problem. -
Ipod stuck in lock mode and won't connect to Windows computer
My Ipod is stuck on the lock position and won't connect to my computer when I plug it in. The hold switch moves back and forth just fine and it was working perfectly yesterday. It's the classic nano that's square. It's stuck on a song that I used as my alarm yesterday morning. I haven't turned it on since then and when I pushed the on switch, it went to the screen but then wouldn't do anything else. I've tried to hold down the menu and middle button while moving the hold switch, but it didn't work. Please help!
I fixed it! I had to switch the hold button from on to off to on again and then held the menu and middle button down at the same time. It works just fine now!
-
Hp C4580 printer won't connect to wireless network, but see network is available.
I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
Help would be great.Hello there! Welcome to the forums @Cushionman ,
I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
Let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?
Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.
Try downloading the driver directly from Canon's web site.
-
Apple tv won't connect to my computer
I just got ATV2 for my husband for his birthday. It connects to his computer just fine, and initally connected to my computer (we both have macs), but now it won't connect to my computer. I have updated my software, turned on home-sharing, etc, but it still won't connect! Any ideas??
Thanks!
RachelWelcome to the Apple Community.
Check you are using the same homesharing ID and password as your husband.
Check your firewall is allowing access for iTunes.
Check your computer is on the same network as the Apple TV. -
Ipod won't connect to the computer at all.
My 3rd Generation iPod nano won't connect to the computer at all. Therefore it has no battery for me too be able to reset or try to do anything with it.
I've only been advised to make sure that i have the most recent version of iTunes?
Could anyone help please?
Thanks, Hollie.Try uninstalling the drivers,
Plug in your iPod
Right click on My Computer and click on Manage
that will bring you to the Computer Management
On the left hand side click on device manager
on the right side click on the plus sign next to Universal Serial Bus Controllers
it will show a list, in that list locate iPod or USB mass storage device
right click and select uninstall
Unplug your iPod and plug it back in
Windows should automatically start installing them again
if nothing pops up then right click on Universal Serial Bus Controllers
and choose scan for hardware changes
If that doesn't work
Go back into Computer Management
Click on Disk Management on the right
and on the left it should say your iPod
Right click and go into change drive letter and paths
click on the change button
Change it to something like N or M
Click ok, you will get a message saying "changing the drive letter may cause the program to no longer run are you sure you want to change this drive letter"
click ok
then restart your computer -
IPod Won't Connect to PC Computer
I have had some issues I wasn't able to fix concerning my iPod Classic and my PC computer. Until recently, my iPod 120G Classic would not connect to my computer. I have downloaded the most recent version of iTunes, I've tried resetting it, and I've restarted my computer a couple times. I cannot restore it cause it won't connect to my computer. I've tried Disk Mode as well as changing USB ports. This didn't work. What happens is that it says USB not readable or something similar to that on the connection for half a second than disappears. This has been occuring ever since I synced a movie to my Classic. Any suggestions on how to fix it?
I have had some issues I wasn't able to fix concerning my iPod Classic and my PC computer. Until recently, my iPod 120G Classic would not connect to my computer. I have downloaded the most recent version of iTunes, I've tried resetting it, and I've restarted my computer a couple times. I cannot restore it cause it won't connect to my computer. I've tried Disk Mode as well as changing USB ports. This didn't work. What happens is that it says USB not readable or something similar to that on the connection for half a second than disappears. This has been occuring ever since I synced a movie to my Classic. Any suggestions on how to fix it?
-
My won't connect to any computer
My won't connect to any computer, it's up to date with IOS 6.1.3 and i've used mulitple ipod charging cables but nothing works, it only charged when it's completely flat too, then it turns on and stops charging, goes flat and charges again, I also reset it and it didn't help, and now i've lost all my photos because i can't connect to a computer to restore my back up, someone please help, also the only way it full charges is if i leave it in sleep mode, it doesn't say it's charging but later on it will have full bettery
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
also
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
Ipod shuffle second generation won't connect to my computer
I'm operating on Window 8.1 and my iPod Shuffle 2nd Gen won't connect to my computer. My USB port and cord are working because it does make the connection noise when I plug it in but it does not show up in My Comptuer or in My Devices on iTunes. This is the second iPod Shuffle 2nd Gen I've had this issue with.
If you have not already, as a test, shut down (power off) your computer and disconnect all USB devices (including any hub). You can leave standard keyboard/mouse connected, if used. If it's a laptop, connect its power adapter so that it's not running on battery power. If the shuffle's power switch is ON, put it in the OFF position. Power up the computer, run iTunes, and connect shuffle to a direct USB port on the computer, by itself. This is a test for possible interference between connected USB devices. Any difference?
If that does not help (or you already tried), does your computer have USB 3.0 ports (instead of 2.0). If so, and if you happen to have an older USB 2.0 hub that is powered (has its own power supply), try connecting the hub to your computer and your shuffle to the hub. -
Eprintcenter printer won't connect to server
eprintcenter printer won't connect to server had it working at first so I delete it now the printer code won't work.
Just posted the same issue.
Think it might be HP's end. Lets wait for a response!! -
My iPhone won't connect with my computer or charge. How can I fix this?
My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
How can I correct this?I forgot to mention, the iPhone does charge via wall plug.
-
[HP Photosmart D110a] Printer won't connect to network
Printer: HP Photosmart D110a
Operating system: Mac OSX 10.6.8
I'm living in a dorm room and trying to wirelessly connect my printer to my computer. I can't connect my printer to my university's network because it's protected. Instead I've been connecting to my printer's SSID network. I go into Settings --> Wireless --> Wireless Settings --> Wireless Setup Wizard --> the printer scans for routers, and then the SSID name comes up in a list underneath my university's closed network. It's called HPD110a.7809C6.
I connect to it, it says it's connected, but then the Wireless light keeps flashing blue. I go back to the Wireless tab and it shows that it's connecting, connecting, connecting... and then there's no connection.
My printer was working a little while ago. It's been tempermental and has occasionally worked. But since the last time my roommate used it and turned it off, it's refused to connect to that SSID network and has thus refused to work. I think I solved the connectivity issue I had before by connecting it to the SSID network, but now it won't connect.
Things I've tried to combat this issue:
Restarted the printer, both by turning it off and turning it on manually, as well as pulling the plug out of the back while it was on (I've read in my search for an answer for this problem that doing that can help some issues?) and unplugging it while it was off and then restarting it
Continuously tried to reconnect to the SSID network
Tried to enter the printer's IP in my internet browser's address bar; nothing came up, since it isn't connected
Turned off the wireless in the Wireless Settings menu, then turned it back on a half hour later, then waited to see if it'd reconnect
Reset printer drivers
Updated my ePrint software and installed all availible HP product updates
I've printed out the Network Test multiple times, and each time it's said everything passes, but that I've had numerous disconnects and that the connection is low
I even moved a music player that was near my printer, thinking that maybe the metal was messing up the connection somehow (last resort)
Changed the empty ink cartridge (last resort)
I haven't tried restarting my computer, but I don't think that's what the problem is. My roommate's computer can't connect to the printer either (she's running OSX 10.8).
I have the printer in my Printer list twice in two seperate ways: One version is connected through the IP address, and the other is an option that appeared once while I was connected to the SSID network and just became a new printer. That one includes the scan option, but the first one doesn't. When I try to print something, the first printer says "Network host [IP ADDRESS] is busy.. will retry in 5/10/20/etc seconds..." and the second printer says "Printer offline."
The same thing happens with both whether I've gone into my Airport settings in the upper right and connected to the printer as a Device or not. It still shows my printer as a Device that I connect to, even though the printer itself says it's offline.
Additional informatiom:
I don't have a USB cable for my printer, so I haven't tried that yet.
At one point during all the re-setting and restarting, I saw the printer's IP address appear in the Wireless menu as the connected network, but it still wouldn't print at that time.
That's all the information I can think of in relation to this issue; if anyone needs to know anything else, let me know. Hopefully it's enough, and hopefully someone will have the answer to my problem.
Sorry if anything is confusing or frantic; I've been dealing with this for a few days now, and I've searched all the help forums I could and looked through as many HP documents as possible, but nothing has changed the situation. This is basically my last hope.After just switching from Cable to FIOS, I had to get my HP C4580 wireless printer back online too.
What was important was that the Printer settings knew about the IP and port changes that are impacted from the new network and router from Verizon. How to do this is in your HP printer network setup manual and handled by their driver when its installed on the PC.
If all fails, try hooking up to your printer via an USB cable and start from there. Make sure everything works wired before trying again from a wireless setup. Youll end up with two printers in your Windows Printer choices, one for USB and one for Wireless, but thats no big deal.
Tmas -
Printer won't connect to laptop - Please help asap!
I've connected my printer to the internet, done all the steps that the useless desktop dr or whatever it's called has told me to do, (including uninstalling/reinstalling various different things, restarted printer and laptop, turned router on and off etc) and it still won't connect!
I've got my final deadline in a week and I honestly have no idea what to do anymore, and since I can't actually find anywhere to contact HP on here, I'm begging anyone for some help?
I've set it as default, it's printing "test pages" with no problems, it just will not connect to the laptop (Dell, Windows).
Thank youPlease provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!
Maybe you are looking for
-
TV-Out on Mega 180 (Composite)
Hi there, I just received my Mega 180 some days ago. So far I'm really satisfied. I just have one problem an perhaps you could help me. I at first used the S-Video out from Mega to my S-Video-Scart-In of my TV. That worked without problems. Now I wan
-
UEFI & syslinux - system will not boot without keyboard plugged in
Somewhat of a weird one. I have successfully gotten a UEFI Arch system booting, using the https://wiki.archlinux.org/index.php/Sy … FI_Systems and https://wiki.archlinux.org/index.php/Un … _Interface wiki articles. Speficially, I used "efibootmgr" to
-
Firefox was unable to open google, and I saw there was an update for that problem, but I am unable to install the update (or any update for that matter) as well as removing Firefox. Every time I try to do so, I get a message that I must close Firefox
-
Adobe 10.1 Signature Field not working
When I click on the Signature Field created with LiveCyle in Adobe X, the epad isn't activated for signature. I get the error message below. Working with IntegriSign Epad Link to resolve but have ran out of solutions. Error Message: This plug-in is
-
9x9 array of buttons and not a single button worked
im trying to build a 9 x 9 block composed of buttons. I used array of buttons. here's my code with my explanation and poor logic thinking details. public class ButtonArrayDemo extends JFrame implements ActionListener private JButton[] sButton; privat