My problem I worked updated iPhone 3 gs (ios4.1) to version (ios6), and when operating the device required to activate the phone and therefore appears to me aftermarket says (IMEI 01 216 300 555 018 3 ) ICCCID unknown.

My problem I worked updated iPhone 3 gs (ios4) to version (ios6), and when operating the device required to activate the phone and therefore appears to me aftermarket says (IMEI 01 216 300 555 018 3 ) ICCCID unknown.
There is no network
I hope that I showed you my problem

That's a critical failure. It can not be fixed. It is usually the result of jailbreaking or hacking the phone to unlock it.

Similar Messages

HT201365 I work for a company and when we have users terminated they return their phones and we do not know the passcord or apple id for them how are we suppose to wipe a device?

We terminate user and we sometimes like to remote wipe or get back a phone that is locked by a passcode we do not know what it is? So how are we suppose to be able to wipe the devices. The users setup their own apple accounts so we never know which email or password are either? so how are we suppose to remotely wipe or wipe device to be able to reuse?

I am in the same situation, trying to figure out the most elegant way of recovering company iPhone assets that are returned to me. It won't help for anyone already set up under an existing Apple ID, but here is what we're doing, moving forward: All AppleID accounts must be set up under the user's work email address. This way, when John Smith leaves our company, I can have our email admins reset his work email password. I then go to the Apple ID link, ask Apple to reset that user's work AppleID password through Email authentication, and that auto-email is sent to the mailbox that I now have control of. I click the "reset" link in the email, and proceed from there. Not the smoothest process, but it will hopefully work.

I am new to iphones and went to Itunes and it said my new iphone needed a software update. Now the apps that I put on wont work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

After updating iphone 4s to 6.1 version my battery percentage stood at 1 percent. Does anyone has same problem? Or its update bug?

THIS is "quite a few": https://discussions.apple.com/thread/3391947
As are these:
https://discussions.apple.com/thread/3391947?tstart=0
https://discussions.apple.com/thread/3484755?tstart=0
https://discussions.apple.com/thread/3481668?tstart=0
https://discussions.apple.com/thread/3518760?tstart=0
https://discussions.apple.com/thread/2755090?tstart=0
https://discussions.apple.com/thread/3507356?tstart=30
https://discussions.apple.com/thread/3482083?tstart=60
https://discussions.apple.com/thread/3492588?tstart=60
https://discussions.apple.com/thread/3397244?tstart=90
And older ones:
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update
As you can see, battery issues have been common since the first iphone, frequently reported after an upgrade, but not always. So to blame a specific version doesn't describe the problem sufficiently to find a resolution.

HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
Will the data on my iPhone be preserved?
No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
copied from Apple - Support - Service Answer Center

When i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

TS2430 tried to do the 7.04 update on my iPhone 5 and now it has the iTunes logo stuck on screen and when I connect to iTunes it states my phone needs to be restored?? I don't want to lose all my stuff- ideas?

I tried to do the 7.0.4 update on my iphone 5 and now it has the itunes logo stuck on screen and when I plug into itunes it states my phone needs to be restored. I don't want to lose all my stuff.... ideas?

here is solution
http://support.apple.com/kb/HT1808
You have already lost it at this stage
but you have a backup of course

My iphone 4s was updating to like 7.1 or 7.2 and i tried to updating by the iphone but it froze and turned off. and when i tried turning it back on the phone kept going to a screen that said plug it in to your computer i did but it froze at the scree

my iphone 4s was updating to like 7.1 or 7.2 and i tried to updating by the iphone but it froze and turned off. and when i tried turning it back on the phone kept going to a screen that said plug it in to your computer i did but it froze at the screen where it says plug it into iTunes. ive tried plugging it in to the computer but the phone turns itself off in the process. my old phone broke so I need to use the 4s

Hi sgray2832,
If you are having an issue with your iPhone becoming unresponsive or turning off unexpectedly, I would suggest that you troubleshoot using the steps in this article -
iOS: Not responding or does not turn on - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

I downloaded an update and when i hook up to itunes on the computer it says itunes detected iphone in recovery mode. I even restored it like it said. help i am lost!!!

i downloaded an update and when i hook up to itunes on the computer it says itunes detected iphone in recovery mode. I even restored it like it said. help i am lost!!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store.

HT4623 im updating my iOS 6 then my battery completely drain when i re charged my battery my i phone 4 wont start again.

im updating my iOS 6 then my battery completely drain when i re charged my battery my i phone 4 wont start again.

I had the same problem updating to the new ios 6. It seem to have removed all my software and everything else from the iphone. It will not operate anymore...does anyone else have this problem? it just happen last night and now all i have is a sign on the iphone asking me to plug it into itunes ....when i do it tells me to restore it. I done this 3 times still the same results. frustrated

When I download firefox, using recommended setting, or my own, all the sub files/folders like plugins, modules, updater end up on the desktop as well as in the file location. And when I try to put them into the file location, they don't. And when I delete

When I download firefox, using recommended setting, or my own, all the sub files/folders like plugins, modules, updater end up on the desktop as well as in the file location. And when I try to put them into the file location, they don't. And when I delete them, FireFox won't open. I tried deleting FireFox and reinstalling it multiple times, and a message pops up sometimes that says FireFox may not have installed correctly, so I follow the steps, but all the extra icons on my desktop don't go away. This has happened every time I have downloaded FireFox. The browser itself works, but I need to know how to get rid of these icons, but still be able to use FireFox. This is on a new computer, with Windows 7.
== I downloaded FireFox. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6

Managed to solve this myself. Just went to properties > hidden.

My problem I worked updated iPhone 3 gs (ios4.1) to version (ios6), and when operating the device required to activate the phone and therefore appears to me aftermarket says (IMEI 01 216 300 555 018 3 ) ICCCID unknown.

Similar Messages

Maybe you are looking for