My repaired water damaged macbook pro has no audio with the icon greyed out. i tried all the suggestions but nothing seems to work. however, on my external clone, the output does work. any ideas about this?

I tried reseting the pram, reinstalling the software, plugging the headphone jack in and out, deleting playlist but nothing works. on the external clone, the output works with noise but still no input device.
can i use a sound card instead?

If you just had the system repaired for water damage what did they replace? If it was the Logic board then all parts should work and if they don't, like the sound, then they didn't fix it correctly and you should take it back to them for a proper fix.

Similar Messages

Hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?

- Have you tried going to the developer's support website/contacting the developer?
- Try a reset. It surs many ills and nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

At the top of my iPhone 5 it has been saying searching for hours and won't go away I have tried cleaning my SIM card but nothing seems to work any advice?

At the top of my iPhone 5 it has been saying searching for hours and won't go away I have tried cleaning my SIM card but nothing seems to work any advice?

Hey Savannahgrace321,
It sounds like you are experiencing an issue with service on your iPhone. I have an article for you that will help you troubleshoot this issue:
If you see No Service in the status bar of your iPhone or iPad - Apple Support
http://support.apple.com/en-us/ts4429
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

MacBook Pro: Unable to Empty Trash (secure or otherwise). Have tried all remedies suggested on Apple's site. I think "Secure Empty Trash" bogs at the first file "iPhone4, 1_8.02_12A495_Restore.ipsw" at 1.78 GB size and goes no further.

MacBook Pro: Unable to Empty Trash (secure or otherwise). Have tried all remedies suggested on Apple's site. I think "Secure Empty Trash" bogs at the first file "iPhone4, 1_8.02_12A495_Restore.ipsw" at 1.78 GB size and goes no further. When I try to move it out of Trash to a temporary location so I can empty remainder of Trash, I get the message "Some of the items you are moving are in use by another application. Moving the items can cause problems with the application using them. Are you sure you want to move these items?" at which point I select "Stop" to avoid possible disaster. Can you help? Thanks.

01/05/15 6:01:27.000 pm kernel[0]: Previous shutdown cause: -62
That usually indicates an abnormal shutdown due to a hardware fault. The exact cause can only be determined by Apple, so schedule a Genius Bar Reservation.

My Apple TV willl no longer access my "owner's library" in iTunes. It had been working just fine... then nothing. I've been checking discussions, and trying suggestions, but nothing seems to work.

My Apple TV willl no longer access my "owner's library" in iTunes. It had been working just fine... then nothing. I've been checking discussions, and trying suggestions, but nothing seems to work.

Have you restarted everything including your router?
Don't suppose you've added any new security software or firewalls to the computer?

HT4623 When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

My iPods internal speaker isn't working, the sound works with headphones but now without. I've turned it on and off several times and pulled the headphone out and put them back in but nothing seems to work, please help?!

My sound usually works but just yesterday it totally just stopped. The sound is turned on full, the headphones are out, and I've tried turning it off then back on but it didn't help at all. It's an iPod touch 2nd generation, 8G.

Try the following to rule out a software probleM
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPodIf you still have the problem you likely have a problem with the headphone jack in the iPod. They can be replaced. I would make an appointment at the Genius Bar of an Apple store to identify/determine the cause.

I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

http://support.apple.com/kb/TS1538

HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

I am using PP 2014 CC and it and or Encoder keep crashing.. using iMac computer with Yosemite OS anyone have any ideas about this issue?

Hi,
Please give this a try: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Thanks,
Rameez

HT3275 Any ideas about this error message? (error -1)

Any ideas about this error message?
"The backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” could not be accessed (error -1)."

Standard Lion networking .. Reboot the TC or use the disconnect all users in the AU.. it has not closed the sparsebundle correctly from last time.. or has simply forgotten where the TC is.
It is reported at least once a day here.
See C17
http://pondini.org/TM/Troubleshooting.html

My MacBook Pro has no audio. Sounds preferences showing output is Optical digital-out port. How do I change this to built-in speakers?

My MacBook Pro has no audio. Sounds preferences showing output is Optical digital-out port. How do I change this to built-in speakers?

I experienced this same problem yesterday on my MacBook Pro, still searching for a solution, several other posts here indicate people have been experiencing this since at lease 2007. I have yet to find a clear solution.
It appears that occasionally inserting headphone causes this, it turns on the Optical digital-out port feature (red light glows inside the headphone port) and takes away the internal speakers option. Restarting did not restore it, but for some reason after sitting asleep overnight the sound started working again and the internal speaker option return in the Sound - Output Window, and the Optical Digital-out option went away.
Here is another post with some ideas on this
https://discussions.apple.com/message/4160477#4160477

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

My macbook pro has white screen with flashing folder.

my macbook pro has white screen with flashing folder.
i called the repair services and they say its hard disk problem
so i would like to ask everyone here if the problem would be solved if i just changed the original hard disk to a ssd myself or do i realy need to let them repair for me.
ps : i dont have warranty

See A flashing question mark appears when you start your Mac. I would suggest you try reinstalling OS X.
If you are running Snow Leopard:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

I just downloaded a few tv show and the 'info' / 'description' section has not downloaded for the episodes...on previous items it has downloaded just not the recent few? Any ideas why?

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

My repaired water damaged macbook pro has no audio with the icon greyed out. i tried all the suggestions but nothing seems to work. however, on my external clone, the output does work. any ideas about this?

Similar Messages

Maybe you are looking for