My sfc uni game does not fully function thru mozilla firefox -- works fine thru other venues

does not allow me to play on firefox but thru other modes I can play

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!

Similar Messages

  • I have 2 MacBooks upgraded to Mavericks. Mail on one will not accept my Exchange password. Works fine on other macbook and a mini. Help?

    I have 2 MacBooks upgraded to Mavericks. Mail on my MB Air will not accept my Exchange password. Works fine on other macbook and a mini. Any ideas?

    Hi, and welcome to Apple Support Communities.
    To be clear, are you talking about accounts set up in Apple's Mail application?

  • Audio after resume does not fully function.

    After resuming Windows 7 x64 from hibernation, my Boot Camp does not detect headphones. Usually, I have the headphones out, then hibernate. After resume, I plug the headphones into the headphone jack, and it doesn't make a difference, the audio still comes out of the internal speakers.
    If I were to restart Windows, it would be fine again though.

    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!

  • I have an index page that does not correctly load css, but css works on all other pages in the site.

    http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
    http://www.boulderridgecondos.com/news.htm
    I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
    Any help or suggestions to research something would be appreciated.

    That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.

  • Firefox is not launching in one user account (just does not react at all) although it works fine in another account on the same laptop

    Have been running Firefox without problem in both my own and my child's account on my laptop. Today, although Firefox still works normally in my own account, it does not launch at all in my child's account. Clicking on either the short cut or via AllPrograms results in the timer starting briefly and then disappearing and nothing happening. I have checked Task Manager and Firefox is not showing as running in the Processes tab. I have tried to set up a new profile in that account to no effect.

    I am having exactly the same problem. This worked on all versions of Firefox up until mid last week. It started failing on Wednesday, coincident with the installation of Firefox 8.0 (see attached gif showing the automatic update on that date).
    To fix the problem, you have to shut down Firefox 8.0 on one account, switch to the other account and then you can run it there.
    If Firefox 8.0 is running on on account, the other account will run Firefox, but when you enter an URL it waits for quite a while then reports "The connection was reset. The connection was reset while the page was loading".
    We also use Thunderbird 8.0 and it does not exhibit this problem, and works at the same time as Firefox 8.0. I suspect they might share some components.
    I'd be happy to supply more details if needed.
    Thanks,
    Ed

  • Does not compile on LV 2013, but works fine on LV 2012 SP1

    I have an FPGA VI that compiles without issue with LV 2012 SP1, but does not work with LV 2013 and Xilinx Tools version 14.4. Why is this happening? I have attached the compiler log file.
    Attachments:
    XilinxLog.txt ‏1468 KB

    ba_0101,
    2012 SP1 and 2013 both use different versions of the xilinx compilation tools. As we don't produce that software it's hard to say exactly what may have changed in their implementation that is causing the compilation to fail. A quick look at the logs uncovers this error during the placement phase:
    ERROR:Place:120 - There were not enough sites to place all selected components.
    Some of these failures can be circumvented by using an alternate algorithm
    (though it may take longer run time). If you would like to enable this
    algorithm please set the environment variable XIL_PAR_ENABLE_LEGALIZER to 1
    and try again
    It looks to me like this error stems from this:
    ERROR:Place:543 - This design does not fit into the number of slices available
    in this device due to the complexity of the design and/or constraints.
    Which is a simple resource overmapping error. It looks like your design is rather large based on the rest of the logs. Am I correct in assuming this? During the compilation, what do the pre-synthesis device utilization reports estimate?
    With large designs it is common to sometimes have successful compilations and sometimes not due to the random nature of the compiler during the place and route phases. Does the design consistently fail in 2013 accross several compilation attempts?
    If you continue to see consistent failures, Xilinx's support documentation for this error suggests using setting an environment variable within the compile tools to use a different algorithm in the P&R phase. According to the documentation, this algorithm may take longer to execute, however it should improve the likelihood that your design successfully compiles. 
    Additionally, if the design is just over utilization, you may benefit most by searching your design for areas that could be quickly and easily optimized to decrease resource utilization. I hope this information helps, please post back if you have any further questions.
    Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

  • Safari 6.0.4 does not open any pages (but Firefox works)

    A couple of days later after the update to 6.0.4, Safari is unable to load any pages.
    I have disabled all extensions and run OnyX over it, but without any success.
    All options in Proxies in the network preferences are deselected.
    Firefox and other applications can use the LAN-Internet-Connection without any issues.
    Does it have something to do with another problem, because I can not open the Java Control Panel (it always crashes)
    I have a Mac Pro 3.1 running with 10.8.3
    Can somebody please help?
    Many thanks
    Regards
    Nils

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem.  Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Spry Menu Bar does not show up in Mozilla Firefox 1.0.7

    I been building a spry horizontal menubar in Dreamweaver.
    Everything was working well in both Firefox and IE. Then it
    disappear in Firefox. The menubar appears in
    www.brycelevancushing.com
    Bryce leVan Cushing Web
    site
    Could someone help solve this mystery?

    Many many moons ago, a work-experience student, decided to play a trick on me. Knowing that I often used MS Excel, he decided to change the default text colour to white. On a white background, the information that I tried to enter into the spreadsheet did not show up, making me think that I had a virus or worse on my computer.
    Have a look at the following exerpt from your SpryMenuBarHorizontal.css
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
        display: none;
        background: #FFF;
        left: 0px;
        text-decoration: none;
        width: auto;
        padding: 0px;
        z-index: 1010;
    Good luck,
    Gramps

  • After recharging iPod getting no image on screen just a dark blue light, does not respond to any input.  Worked fine this AM now nothing!

    ipod touch not responding, just a dark blue screen after recharging.  Pushing on/off and other buttons have no effect.   Worked find this AM and up until now...now; literally NOTHING!

    Have you tried restoring?
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If necessary >  Apple - Support - Service Answer Center

  • Thunderbird suddenly started asking for my password, but does not accept it. (Web mail works fine with the same password)

    Thunderbird starting asking for my password. I know the password, just have not been asked for years.
    After typing in password keep getting message
    'Sending of password did not succeed. Mail server mail.intergate.com responded: dmanns logon failed '
    however, I went to Webmail.intergate.com; was redirected to http://email.1dial.com/webmail/Login.aspx.
    Can get email from webmail just fine (same password), just not via Thunderbird.
    Have already run two anti-virus scans. Have deleted the saved passwords and re-entered them as the program asked for them and renamed key.db & signons.sqlite (Read this in a forum on the web) and they rebuilt themselves. Still can not get email via Thunderbird.

    Did you contact your email provider? They may have server issues.

  • Two Windows 7 accounts on one pc, one firefox works fine, the other fixefox not responding.

    We have 2 WIndows 7 accounts on one pc. On the account my wife uses, she is always having problems with firefox that I never have.
    Recently it was shrinking fonts in emails.
    Now, she gets Firefox not responding on start up. Can't reset settings because I can't get control of the menu in firefox while it is spinning.
    What to do, eh?

    It may also be a local problem with some other programs on her account. I would run both an antivirus (Windows Security Essentials, Kaspersky, etc) and an anti-malware (Malwarebytes) to discount those possibilities, then use a Task Manager window (ctr-alt-del or right click the taskbar) to monitor resource usage.
    It's also possible she accidentally installed a lot of taskbars which are draining resources and modifying behavior. Once you get into the browser using Guig2's method (above), look at your addons and plugins, use a search engine to figure out what they do, and disable what you're not using. You may need to use Add/Remove programs as well.

  • ITunes Store does not fully appear on screen

    The iTunes store does not fully "load" on screen. It takes 2-3 minutes for just a few images to appear and then it stops. Everything else about iTunes is functioning completley well as are all of my other internet connections/processes. This problem has existed for around one month and we have upgraded to iTunes 9. Please help !

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • DTR component not fully functional

    Hi all,
    We recently tried to change the DTR repository properties file, according to SAP NOTE: 1001509.
    After performing the process mentioned in this note, we noticed this particular repository.properties file has the wrong content (I downloaded the file from online NWDI - DTR and this caused the file to include HTML Tags and replacing the Key/Value pairings with a different keyset).
    This caused the DTR to not fully function; for example we cannot checking any activities anymore. Whenever we try to restart the DTR application in the Web AS, we get a NumberformatException on multiple Key/Values in this repository.properties file.
    At this moment, we are not capable of changing this repository.properties file since we cannot checkin activities.
    We also tried to replace the repository.properties file on UX, but we now believe (since this file is also version controlled) it is only contained in the NWDI Database.
    I've included the error trace DTR pushes out;the current repository.properties file (wrong one) and the correct repository.properties we wish to have in place.
    This is a very challenging topic for our teams to solve.
    Anybody up for an idea?
    Thanks,
    Wesley

    The great thing about most BlackBerry phones is their removable battery. Anytime something goes wonky with your phone, doing a battery pull should be your first course of action. When you do a proper battery pull, many unnecessary temporary files get deleted and this helps your phone run smoother and ofter quicker. To do a proper battery pull, make sure your phone is powered on then remove the battery and replace it a few seconds later and wait for your phone to boot up. Don't worry, you won't lose any personal data. Many phones from competing manufacturers don't have this feature so be happy that you can correct many issues using this simple technique.
    I can answer your question about voicemails right away. Your carrier's voicemail number should be programmed on the SIM card. To access it, simply press and hold the #1 on your phone for a second or two. That should direct you right to your voicemail box where you'll be prompted to enter your password. If you press and hold the #1 on your keypad and you're not directed to your voicemail box, contact your carrier to obtain the number as well as instructions on how to enter it in your phone.
    Try the battery pull and report back with your results. Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • [svn] 3045: Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'

    Revision: 3045
    Author: [email protected]
    Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
    Log Message:
    Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
    Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-13900
    Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

    Revision: 3045
    Author: [email protected]
    Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
    Log Message:
    Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
    Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-13900
    Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

  • When the apple review team review our app,they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

    when the apple review team review our app，they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of  trajectory replay come ture。in fact， we have added function when the app  is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when  the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
    the blow is the content of the review team email：
    We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
    We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
    It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
    For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
    If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
    "Continued use of GPS running in the background can dramatically decrease battery life."
    Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
    We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
    For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
    - complete details of your rejection issue(s)
    - screenshots
    - steps to reproduce the issue(s)
    - symbolicated crash logs - if your issue results in a crash log
    If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

    Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Maybe you are looking for