My usb 5 button mouse isn't working properly need help please

I tried to change my xorg to use usb but I couldn't boot if I changed anything to do with my mouse my mouse used to work and light up like it was supposed to. anyways this is the errors from my error log
May 30 18:20:16 Shadowfire usb 1-1: device not accepting address 2, error -71
May 30 18:20:16 Shadowfire hub 1-0:1.0: unable to enumerate USB device on port 1
May 30 18:20:16 Shadowfire hub 4-0:1.0: unable to enumerate USB device on port 1
May 30 18:20:16 Shadowfire hub 4-0:1.0: unable to enumerate USB device on port 3
May 30 18:20:16 Shadowfire hub 4-0:1.0: unable to enumerate USB device on port 4
May 30 18:52:17 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 1
May 30 18:52:17 Shadowfire hub 7-0:1.0: unable to enumerate USB device on port 1
May 30 18:52:17 Shadowfire hub 7-0:1.0: unable to enumerate USB device on port 3
May 30 18:52:17 Shadowfire hub 7-0:1.0: unable to enumerate USB device on port 4
May 30 19:14:59 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 1
May 30 19:14:59 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 3
May 30 19:14:59 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 4
May 30 19:21:58 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 1
May 30 19:21:58 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 3
May 30 19:21:58 Shadowfire hub 2-0:1.0: unable to enumerate USB device on port 4
and this my xorg for some reason it has a number of different mouse settings
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us "
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "DPMS" "true"
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
EndSection
Last edited by Shadowmeph (2008-05-31 16:35:53)

Sounds like you might have an interaction misapplied to some part of the component. I would look around for a rogue On Click interaction, and also look at what the Pressed states look like of the button.
Chris

Similar Messages

Button dosen't work properly, need help please

In a custom component I have 5 buttons, for each button i have the roll over, roll out and on click Interaction
So if you roll your mouse pointer on a button it transitions to a state that looks the same but a picture pops out and if i roll out in transitions back
to the first state within the custom component. Every thing works properly except the "on click" interaction: when I click on the button it briefly
transitions to the state it needs to (a totally different one, within the custom component) then it comes back to the original state within custom component
I played around with the "when in state" button but I can't get a crack at it, please help me and ask anything you need if I my explanation wasn't clear enough

Sounds like you might have an interaction misapplied to some part of the component. I would look around for a rogue On Click interaction, and also look at what the Pressed states look like of the button.
Chris

TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Have photoshop cs5 installed on desktop..got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still now working. Need help, please.

I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.

In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run. Naturally, all later versions support it too.
Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
In no case does an Adobe application belong "on your desktop". The default install location should always be respected and left alone.

My iphone 4 had went black and now it wont turn back on i was just texting a second ago now i tried holding down the power button and that didnt work i need help

my iphone 4 had went black and now it wont turn back on i was jsut texting on it a few mins. ago then when i went to check my texts it was black i tried holding the power button down but that didnt work can someone please help

Hi alicia243,
Thanks for visiting Apple Support Communities.
If your iPhone wont power on, I recommend going through these steps first:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

My restriction password isn't working i need help

Set password to keep grandchildren from deleting apps now password doesn't work. How do I fix this?

Hello there, Notyourmamaok.
The following Knowledge Base article offers options for resolving your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Spot Removal tool in L4 isn't working. Need Help!

The spot removal tool on my lightroom 4 is, all of the sudden, not working. The tool opens as it always has and everything looks normal, but it won't heal or clone. It used to work fine, but as of just recent;y it doesn't. I've closed lightroom and have restarted my computer many times and still nothing. The rest of lightrrom works as it always has. Please advice, and many thanks!

Don't feel too bad. You aren't the only one who has gotten bit by that one lately. Rikk has had the solution both times.

Microphone Isn't working and need help

Toshiba Qosmio X70-ABT3G22 Laptop
Windows 8.1-64bit OS- X64 based processor
I recently tried to use my microphone to talk with friends on steam-CoD Ghost's and also tried skype and nobody could hear me and it wasn't being recognized. The microphone has been working ever since I got the computer and I don't know why it suddenly stopped working and maybe disappeared from the device manager list.
So I went to the---Control Panel\ Sound\ Recording| and it says-"Microphone: Conexant Smartaudio HD not plugged in".
Then I went to the device manager and opened the expandable tab--"Audio Inputs and Outputs" and all that was there was "Speakers(Conexant SmartAudio HD) and some others that are used when the HDMI is inserted and are faded out until activated(I'm assuming).
What do I need to do so my microphone will work again?
Does it have anything to do with me installing a beta driver for my NVidia GeForce GTX 770M graphics card as I had version 331.93 installed but reverted back to 331.82 when I noticed that my microphone stopped working.
I also have an integrated graphics card-
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
Driver File Version: 10.18.0010.3345--Driver Date-10/28/2013)(English)<==I think this is the wrong version according to the Toshiba DRIVERS & SOFTWARE section for my computer and is this the correct version=>(10.18.10.3308).
Also found this in the dxdiag I ran to copy my integrated graphics card info down-
Sound Capture Devices
Video Capture Devices
Number of Devices: 0
Conexant Smartaudio HD
Driver Date--7/25/2013
Driver Version--8.65.2.0

Hey Jerry,
Just figured Id let you know I fixed my issue with the microphone showing: Not plugged in.
Turns out the thing I never tried and thought never had any impact was the BIOS was set to fast boot I think.
Good news is that its working 100%. Very happy now
Now if only I could find out why explorer.exe keeps crashing when im trying to manage my files e.g- coyping files from folder-folder.
Is it possible for it to crash if it runs out of available RAM?

The power isnt working I NEED HELP PLEASE

My macbook pro randomly turned off last night hasnt turned on since, it wont respond to charger and have tried SMC, HELP!!!!

It all depends on what occurred. It could be the charger doesnt work, so the battery is dead. A diff charger could get your macbook backup and running.
Also try different outlets to make sure its not the outlet.
I would retry the SMC with a diff charger if possible. But when it doesnt turn on it does really limit how much you can do.

Liquify tool stopped working properly need help ASAP!

Ok so last night I used the liquify tool on a selected area of a picture and it worked fine. Well, now when I select my area and try to use it, it just slightly warps the area and does nothing else. The liquify screen and options never come up. I think it's just repeating what I did in liquify the last time I used it instead of giving me the option to do what I need to do. It just won't let me do ANYTHING with the tool other than the warping(what I think is the "repeating" of the previous uses effects) everything else in photoshop is working fine for me, this is the only problem I'm having. Before this, it would just crash when I tried to open liquify but I fixed that by changing the video codecs/plugins to the ones that work with it so that is no longer a problem, it doesn't freeze or anything. So why is it just repeating what I did last time? Why can't I USE the effect? Help! lol

Are you clicking Liquify at the very top of the Filter menu where the last used filter has a Cmd/Ctrl+F shortcut, or in its usual position further down the menu? If the former then hold down Opt/Alt when clicking the top item (or pressing Cmd/Ctrl+F) to open the filter dialog instead of simply re-applying the last used filter.

Ipod touch not working properly. need help on wether or not to replace battery or something else.

My iPod touch 4th generation 8g is acting up. when i touch an app, it loads like normal but then goes black for about 2 seconds then returns to the normal screen where all the apps are. my music won't play for a long amont of time either (for example about 5 to 10 min.) without going black and freezing for about 2 seconds and returning to the regular scree. my 90 day warrenty has been up for a while and i was wondering if it could possibly be the battery and maybe i should just get the battery replaced, or if any of you have suggestions, i am all ears! Help! and the Apple service company was no help and said i had to buy a package plan in order to get phone service!

The warranty is for one year unless you purchased AppleCare which extends it for a total of two years. The 90 days is for free phone support.
Try in order:
- Reset the iPod, Nothing will be lost,
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes onthe computer
- Restore the iPod to factory defaults/new iPod, also via iTunes
If you still have a problem then you likely have a hardware problem and make an appointment at the Genius Bar of an Apple store. If defective, you should walk out with a refurbished iPod.
For how to restore, see the restoring topic of:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

I have upgraded to 10.10.3 on my MacBook Pro now the Calendar is not working properly. Help please?!?

Yesterday I upgraded my MacBook Pro 13" (Early 2013) to 10.10.3. I immediately started having problems with it opening apps slowly. So I read and discovered it had replaced some of my apps with newer versions. I also restarted it 2 or 3 times. That seemed to solve that problem. This morning I get on and it is doing the same thing, but it is limited to the Calendar. Anything I try to do in the Calendar gets me the spinning beachball, from opening it to editing to adding an event. I have many dates and events saved that I don't want to lose. Am I going to have to reinstall the Calendar? If so, how can I do it without losing my content?

This is the note I sent to the other thread (Macbook is slow since OS X 10.10.3. I'm sorry. I hope this helps
I did not have a specific category that said "log list" once I got to "All Messages". It just showed "Log" so that is what I am sending you. The other thing is that the timestamp is 9:23:?? the next is 9:34:?? and the problem occurred at 9:32:??. So you are getting the log from 9:23 until it repeats.
Apr 13 09:23:49 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:34:43 -MBP hidd[96]: IOHIDEventQueue unable to get policy for event of type 11. (e00002e8)
Apr 13 09:34:47 --- last message repeated 83 times ---
Apr 13 09:34:47 -MBP spindump[1465]: Got xpc error message in libspindump client connection: Connection invalid
Apr 13 09:37:56 -MBP apsd[73]: Failed to initialize budgeting, not using budgeting: Error Domain=Timed out waiting for XPC and/or reply handler Code=104 "The operation couldnâ€™t be completed. (Timed out waiting for XPC and/or reply handler error 104.)"
Apr 13 09:37:56 -MBP apsd[73]: apsd(73,0x7fff7a8d5300) malloc: *** error for object 0x7fd5e0c43ef0: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.Finder[221]): Service exited due to signal: Terminated: 15
Apr 13 09:38:29 -MBP kernel[0]: process Messages[57790] caught causing excessive wakeups. Observed wakeups rate (per sec): 115; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45001
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.ReportCrash[57808]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
Apr 13 09:38:29 -MBP ReportCrash[57808]: Invoking spindump for pid=57790 wakeups_rate=115 duration=392 because of excessive wakeups
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:38:29 --- last message repeated 1 time ---
Thank you for your times!

HTML Snippet is not Working, I need help please

Hi guys im trying to add this HTML to my site
<script type="text/javascript">document.write(unescape("%3Cscript
src='" + ('https:' == document.location.protocol ? 'https://' :
'http://') + "cashie.s3.amazonaws.com/userjs/2d639a4eb41a9bbc85b4d34bd72a81ad-cart.js'
type='text/javascript'%3E%3C/script%3E"));</script>
and it just wont show up..
I need urgent help and this is frustrating me.

answer seems to exist:
https://discussions.apple.com/message/11226530?messageID=11226530&amp%3b#1122653 0

Ipod 2nd generation won't work. Need Help PLEASE

i have a ipod 2nd generation and haven't used it for 3 months or more. and now that I try to turn it on, it won't turn on. I have tried charging it for 2 hours and still the screen stays black. need help. what do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

My usb 5 button mouse isn't working properly need help please

Similar Messages

Maybe you are looking for