MyArray is not responding as GLOBAL scope?

Hello
I want to have a Array declared in the form, and that Array should VISIBLE to every where of the form.
Meaning, i can use tthat aray in every page, every subform, every text field to append the elements
And to loop that array in some button (on click event).
PLs. let me know how can i declare a array that is GLOBAL in scope, really global? at what level i hv to declare it? at root node level (say, my form name is VISITORinfio, so, keeping curson on this node and declaring array in readDoc event? )
I tried with these options but not working at all!!

Pls. help me that let me know how to declare a GLOBAL SCOPE array(i did by using var, with out var key word, i did at TOP level, even i dont hv any functions!) - Thank you

Similar Messages

  • Multiple copies of same email and "Not Responding"

    I have been fighting with Thunderbird for about a week now and have not had any luck resolving my problems. Any help would be greatly appreciated! I have tried all of the suggestions on the FAQ page.
    Here are my symptoms:
    -Getting multiple copies of the same email with the same time stamp.
    -Not pulling new emails.
    -Whenever I try to navigate up or down through the inbox or open an email TB goes to Not Responding.
    -I have gotten the following script warnings:
    Script: resource://gre/modules/XPCOMUtils.jsm:323
    Script: chrome://messenger/content/mailWindow.js:179
    Here is what I have tried:
    -I have totally removed and reinstalled TB (and recovered my profile).
    -I compressed the folders.
    -I rebuilt the Global Database.
    -Starting TB in safe mode did not seem to make much difference.
    Fortunately I have access to webmail through my ISP and it works fine.
    Thank you!

    McAfee have release a defective update, please contact them for support on changing the setting to something that actually works.
    I have seen one poster here today that used their chat support and they "Fixed some setting" and all is now good.
    Not good was not what I intended to say

  • Outlook 2013 Not Responding and Offline Address Book Issues with Office 365

    Around 3 months ago I setup a small business with Office 365 for email. They have 10 PCs, all running newly installed Windows 7 Professional 64-bit, eight with Office 2013 and two with Office 2010. All are connected to a local domain (Server Essentials
    2012) with a single internet connection through a new TP-LINK router. Each user logs into their own PC only.
    The network runs perfectly, internet connection is good but there seems to be RANDOM, INTERMITTENT issues with email not being SENT from Outlook every so often. Email will sit in the outbox for up to an hour sometimes before, eventually, being sent. Incoming
    email seems ok, although this is more difficult to tell. At others times, email will be sent instantly - the size of the message and any attachments makes no difference.
    The issue has happened at some point on every one of the PCs but no particular PC/user seems worse than any other. When email is stuck on one user's PC it can still be sent ok by other users at the same time - so the internet connection is not down. Users can
    can always login to the OWA service ok and iPhones etc. all sync ok even when email is stuck in the Outbox.
    To debug the issue I have worked on one particular user's PC and carried out the following changes - 
    Changes that made no difference
    I have checked the router. A SPI firewall is available on the router but this is switched off.
    I have changed the MTU on the router with no effect.
    There are no unsual add-ins to Outlook
    Outgoing email virus scanning is disabled
    Outlook is NOT integrated with Lync
    The OST file is around 1.7 GBytes is size.
    I have recreated the Outlook profile twice but this made no difference
    Switched OFF "Cached Exchange Mode" - this made things worse !
    The Outlook address book is set to \Offline Global Address List
    I have disabled with Windows firewall on the client PC - no change
    I have adjusted the KeepAliveTime for packets in the registry of the PC to 20 minutes
    Changes that reduced the frequency of "Not Responding"
    I have changed the Outlook automatic Send/Receive time from 30 to 10 minutes - this seemed to help 
    Possible Related Problem
    I have attempted to download the offline address book manually - this hangs at "Copying offline address book template file" in the Send/Receive dialog and there a NO OAB files in the data file location on the PC. 
    So the only measure that has so far "helped" has been the Outlook Send/Receive time change - now set to 10 minutes. Even so, Outlook will occasionally go "Not Responding" for 30 minutes or more (no windows active - only option
    is to close and reopen Outlook).
    There does seem to be a problem with the Offline Address book. I can download this ok for this user on my home PC (Outlook 2010) but this will not download manually on the work pc with Outlook 2013 (despite following all the debug steps above).
    On work PC I can see literally hundreds of "Schannel" errors in the Windows System event logs - 
    Error - Event 36888 Schannel
    The following fatal error was generated :10
    The internal error state is 10
    These errors occur every 2-4 minutes continually all the time Outlook is running. When Outlook is closed the "Schannel" errors stop !
    Can anyone suggest what else to try, please ?
    I have already investigated this issue on the Office 365 Community Forum, and the Outlook forum and they suggested that it was a client (i.e Outlook) issue and that I should post here for further information.
    Thanks for reading !

    An update to this problem.
    I brought one of the office PCs back to my home network and connected it up there. With no changes to the PC I was immediately able to download the Offline Address Book without errors.
    This suggests to me that there must be some problem with the internet connection or router setup in the office environment.
    The router is a TP-LINK W8970. The internet connection is PPPoA. I have seen some suggestion that an SPI firewall can cause issues. This router has an SPI firewall but this feature is disabled on the router.
    While investigating this issue I have frequently been connected remotely to an office PC - sometimes for up to an hour or more. During these periods I have not experienced any connection dropouts so the actual internet connection seems to be ok (i.e. it is
    not dropping out). 
    However, something seems to be preventing the Outlook client from connecting properly with the Office 365 Exchange server in the office environment - or something is dropping the connection to Outlook. Does anyone know of any router settings that might affect
    this ?
    I could try changing the office router but I do not have a spare available. Can anyone suggest a reasonably low cost, currenbtly available router that they know definitely works in the Office 365 environment so that I could buy this for test purposes ?

  • Resolving session scoped component in global scope component.

    Hi,
    I am implementing batch process and i am need to resolve session scoped component in global scoped component.
    In global scope component (one of the component referred by my scheduler which also in global scope as usual) and i need to resolve session scoped "/atg/epub/workflow/WorkflowView" component in my scheduler.
    I tried all possibilities but nothing worked out. I do not have access to current request, because its batch process. following ways i tried,
    1. getResolveName("/atg/epub/workflow/WorkflowView") method of GenericService which is extended by my global scope component -- This returns null.
    2. Tried to get the current request on ServletUtils to use resolveName() method on request.
    ServletUtlis.getCurrentRequest() - This returns null as expected.
    Is there any way to resolve session scoped component in global scope component. Thanks in advance.
    Edited by: 938890 on Jun 30, 2012 4:59 AM

    Try below :
    If you want to resolve the name of a Nucleus component from Java code that is not itself a Nucleus service, you must first initialize Nucleus with this construct:
    Nucleus.getGlobalNucleus().resolveName("target component")
    where target component is the name of the component you are looking up. Note that this construct works only for components with global scope.
    You can also resolve names of Nucleus components using the Java Naming and Directory Interface (JNDI). The following example shows how you can use JNDI to access the Scheduler component:
    String jndiName = "dynamo:/atg/dynamo/service/Scheduler";
    Context ctx = new javax.naming.InitialContext ();
    Scheduler s = (Scheduler) ctx.lookup (jndiName);
    reference - oracle ATG docs.
    ~ Praveer

  • Ralph, help!  (with "does not respond" message)

    My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
    Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
    Thanks in advance.
    Juliette
    iMac G5   Mac OS X (10.4.2)  

    Hi Juliette,
    As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
    If you have UPnP then use that as iChat can use this method.
    Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
    Only have one DHCP server on your network
    Do not use Port Forwarding or Port Triggering twice (Or combo of them)
    There is this on the Portforward.com site about Port Triggering for one version of a B90
    http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
    I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
    Local port 5678 need to trigger Global port 5060
    Local port 5060 needs to trigger Global ports 16384-16403
    Local 5190 Triggers 5910
    Local 5222 Triggers 5220-5223 (jabber stuff)
    Some Jabber logins are on port 5223 so
    Local port 5223 triggers 5220-5222 if needed.
    Ralph
    Ralph

  • Safari do not open and ends up not responding

    Hi,
    Safari no longer works for me after a software update. Safari will not open and ends up not responding upon launch at which time I have to force quit.
    I have gone through the Mac help forums without finding a suitable answer and I tried the following actions but unfortunately not one is working.
    -I have tried to uninstall and install safari again (to uninstall the program I have deleted also all the cookies in preferences and library and application support);
    -I have created a new user and safari does not work for the new user either.
    It seems to me that the mac feels that a safari window is open but I cannot see it.
    Any suggestions would be very appreciated.

    A few things you can try (I see you have tried some of them already):
    If your Safari won't open, one or more of the following procedures should fix it:
    1. Go to Home/Library/Safari/ folder and remove the following two files:
    ¥ history.plist
    ¥ lastsession.plist
    (Safari may not load properly If these two files are corrupted.)
    2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
    (These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
    3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
    (Again, faults in stored cookies may interfere with Safari's launch.)
    4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
    Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
    Also look in Library/Input Managers where other third party add-ons may lurk. If you find a SIMBL folder, please note that some SIMBLE.bundles may require updating or possibly removal.
    Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.
    If Safari is getting very slow:
    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
    You could also try these codes as well: 4.2.2.1 & 4.2.2.2
    If you use a Router, make sure it has the latest firmware installed.
    One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x
    This is described here:
    http://support.apple.com/kb/TS3408?viewlocale=en_US
    If Safari seems to hang for ages:
    If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
    Open the Terminal from the Utilities folder in /Applications and type
    killall -9 WebKitPluginHost
    Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
    Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 appear to have improved the situation somewhat, but haven't completed eliminated it.

  • Creative cloud app not responding-not allowing use of photoshop

    Hello,
    When I try to open Photoshop it goes straight to the Adobe Application manager which does not respond and acts like it is loading for hours. What can I do to get this to work?
    Thank you

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • My Creative Cloud Desktop App is not responding

    On Mac OS X 10.9.4
    So this is what happened:
    Creative cloud desktop was originally not syncing, so I tried logging out and back in.
    Desktop app froze and wouldn't let me access the app. Activity monitor listed it as "not responding". Tried force quit and reopen, same problem.
    Tried restarting machine, no effect. Tried to uninstall, uninstaller is stuck on "not responding".
    Not sure where to go from here.
    Any help would be appreciated!
    Thanks

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Download error server not responding

    I keep getting a download error "server not responding correctly" when I try to download creative cloud.  I had it on my old system, buy now I've installed a new hard drive and can't get creative cloud downloaded.

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Receive a message that Creative Cloud is not responding.  Message occurred right after update of PSCS6

    I cannot open Creative Cloud as I receive a message that Creative Cloud is not responding.  This occurred right after PSCS6 update was installed.

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Droid 2 Global Not acting very global

    I just upgraded my Blackberry Storm 1 to a Droid 2 Global.  I worked through Verizon support to ensure the Droid 2 Global is enabled for international use, and used the *228 feature before leaving the US as instructed.  I also had Verizon support unlock the old Blackberry just in case the Droid 2 Global had any issues.
    I am glad I have the unlocked Blackberry!  The Droid 2 should have been a direct device upgrade so I am assuming it is enabled in the countries I frequently travel.  So far the Blackberry is still connecting everywhere with a strong 3G signal.
    The Droid 2 Global on the other hand is spotty.  It connects in Shenzhen, China with no issue, yet can only see a signal in Hong Kong and refuses to connect.  Now in the Philippines the Droid 2 Global works in Manila but fails to find any service in Laguna (25km south). 
    In the mean-time the Blackberry is working just fine with a European global SIM card.
    I cannot figure out if I have a Verizon issue, or if the Droid 2 Global is an inferior device.  Rebooting and fiddling with the network options has no effect.   Has anyone had these problems and figured out how to resolve them?  Verizon e-mail support has not responded either.

    WorldTravel3633 wrote:
    I just upgraded my Blackberry Storm 1 to a Droid 2 Global.  I worked through Verizon support to ensure the Droid 2 Global is enabled for international use, and used the *228 feature before leaving the US as instructed.  I also had Verizon support unlock the old Blackberry just in case the Droid 2 Global had any issues.
    I am glad I have the unlocked Blackberry!  The Droid 2 should have been a direct device upgrade so I am assuming it is enabled in the countries I frequently travel.  So far the Blackberry is still connecting everywhere with a strong 3G signal.
    The Droid 2 Global on the other hand is spotty.  It connects in Shenzhen, China with no issue, yet can only see a signal in Hong Kong and refuses to connect.  Now in the Philippines the Droid 2 Global works in Manila but fails to find any service in Laguna (25km south). 
    In the mean-time the Blackberry is working just fine with a European global SIM card.
    I cannot figure out if I have a Verizon issue, or if the Droid 2 Global is an inferior device.  Rebooting and fiddling with the network options has no effect.   Has anyone had these problems and figured out how to resolve them?  Verizon e-mail support has not responded either.
    I assume that the Global isn't unlocked?   I haven't had issues with the Global (but some have).  If possible, try putting the SIM from the Global into the Blackberry, and see if the connection is still good.  If not, it might just be that the European SIM works with more providers than the Vodafone one  (that, and the costs of calling, are why I always prefer local SIMs!)

  • MM_callJS Does Not Respond

    In setting up a webpage to display my photographs and Mechanical Engineering, my thought is to use Tabbed Panels to select the gallery (roses, Big Sur Coast, Pacific Grove, etc.) for viewing, then display thumbnails in the Content Panel.  All of the photographs are listed in a master list.  A variable "myselector" would be used to filter the master list for the selected gallery.  When selecting the tab, then "myselector would be defined and the list filtered.  I tried Behaviors (onclick and onfocus) with callJS for the tab; the javascript was either a function or entering the javascript to define "myselector".  I have not be able to have the javascript run.  With popup messages, I verified that the onclick, onfocus or mouseover was functioning.
    For diagnosis, I made a test file to define the text variable, only, and write the text variable value.  Again, the javascript does not respond.  Please tell me what error this operator is making.  The script for the test file is included.
    I thank you.
    <script type="text/javascript">
    <!--
    function MM_callJS(jsStr) { //v2.0
      return eval(jsStr)
    //-->
    </script>
    <script type="text/javascript">
    var testvar;
    function testfunc(){testvar="1234567890"};
    </script>
    </head>
    <body>
    <p ondblclick="MM_callJS('testvar=\&quot;1234567890\&quot;')"> Push this </p> <p onclick="MM_callJS('function testfunc()')">button.</p>
    <p> </p>
    <p> </p>
    <script type="text/javascript">
    var testvar;
    </script>
    <script type="text/javascript">
    function testfunc() {testvar="1234567890"};
    </script>
    <script type="text/javascript">
    document.write (testvar);
    </script>

    Through futher work, I've narrowed my focus to the "myselector" variable.  The variable is defined in the head and redefined in the function.  Within the function, I am not using "var".  Though the variable "myselector" should be global, the changes to its value are discarded when the function closes.  This indicates that it is functioning like a local variable in the function.  After a bit of reading, I've not found the cause of the global/local discrepancy or a fix for it.
    I hope that someone reads this and guides me.
    I thank you.
    Scott

  • Tb not responding, even in safe mode with networking enabled?

    duplicate of [/questions/1054504]
    Hi,
    I've read many of the questions relating to TB not responding and it appears that it is related to anti virus, however I've restarted windows 7 in safe mode with networking, however TB still not responding. I've also ran TB in safe mode while still in windows safe mode and still not responding. I've uninstalled & re-installed TB all to no avail. I've uninstalled a program I recently installed although it was unrelated but still no change.

    ''Matt [[#answer-710384|said]]''
    <blockquote>
    Is your computer a little on the "slow side of things" historically the global search was something of an issue back when it was first introduced. It can sometime be an issue while the initial synchronization of large mail stores occurs. But this is almost always on lower powered machines
    Does your machine specification come close the these minimums ?
    Pentium 4 or newer processor that supports SSE2
    1GB RAM
    200 MB hard drive space
    </blockquote>
    The PC is an HP Pavillion
    AMD Phenom II X4 955
    8GB Ram
    1TB HDD

  • Max OSX10.10.3, Adobe acrobat/document cloud goes into "application not responding mode" right away. must force quit. cannot use the program. Why?

    Have never been able to get this application, adobe acrobat dc, to work on my mac. Constantly goes into "application not responding" mode. Happen to anyone else and know how to fix it?

    Hi Nicholas,
    Verify if Protected View and Enhanced Security are Off. Go to Acrobat-> Preferences -> Security (Enhanced):
    Also having too many fonts active can hurt the performance of any application.
    Try the step 10 of the KB: https://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
    Regards,
    Rave

  • 'Core Sync' app is showing 'not responding'

    When ever I pick any desktop fonts from Typekit, I found it's not synced to my computer. I tried restarting the Adobe Creative Cloud. Then it will sync properly. Similar problem is there with Adoble Cloud files getting synced.
    Later when I check Activity Monitor, when every this problem arises 'Core Sync' app is showing 'not responding'. At times, instead of 'Core Sync' app, 'Creative Cloud' will be showing 'not responding'.
    Any idea how to fix this? It's being very difficult with work with Cloud files since every time I update a file on cloud need to restart creative cloud to upload the file to my colleagues.

    Hi,
    Would you be able to send me your log files so I can better see what might be causing this issue?
    You can find your log files at...
    Mac:
    /Users/<username>/Library/Application Support/Adobe/CoreSync
    Windows:
    C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
    'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
    http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
    https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
    please send them on to me at [email protected]

Maybe you are looking for