Mysql oracle migration capture problem

I have problem during capture database.
I don't know it working or not working after catalog, schema, table object capturing.
It seems stop.
mysql have only one table and one record.
MYSQL version : 6.0
ORCLE version : 10g
SQL Developer : 1.2
Message was edited by:
user613482

Mysql version 6 is not yet supported for migration. Support exists only for versions 3,4 and 5.
- Rakesh

Similar Messages

MySQL Oracle DB link problem

Hi,
I'm running Oracle 11g 64bit on Windows machine. The database character set is UTF8.
I have MySQL 5.07 installed on linux with one database. The database charset is UTF8. I needed a database link, so I installed MySQL ODBC driver where the Oracle is running.( I installed 5.1.6 64 bit version) I created datasource and configured everything on oracle. ( Database Gateway, Listener, dblink).
Here comes what is strange for me:
If I set HS_LANGUAGE=american_america.utf8 in the Database Gateway configuration, I get "ORA-00001: unique constraint violated" error after any singe select.( for example: select * from test_table@MYSQLDB ).
If I set HS_LANGUAGE=american_america.we8mswin1252 or american_america.WE8ISO8859P15 everything seems fine, except special characters. If I try to insert for example cyrillic characters to mysql database the result become like this ???????.
Did I do something wrong?
Is there any workaround?

Hi,
This forum is for Oracle ODBC Driver issues. You'll most likely want to post your question in the Heterogeneous Services forum:
Heterogeneous Connectivity
Greg

MySQL to Oracle Migration Issue - Unknown character set index for field.

Hi,
Looking for help..!!!
Migrating mySQL - version 4 database to Oracle 10g using oracle migration work bench. It went well until the last step. But, during the data migration, OMWB has given the following error:
+++++++++++
Unable to migrate data from source table gets.sales_order_01 to destination table gets_ora.sales_order_oracle10: gets_ora.sales_order_oracle10; Unknown character set index for filed "12596" received from ser.
+++++++++++
Log file shows:
java.sql.SQLException: Unknown character set index for field '12596' received from server.
     at com.mysql.jdbc.Connection.getCharsetNameForIndex(Connection.java:1692)
     at com.mysql.jdbc.Field.<init>(Field.java:161)
     at com.mysql.jdbc.MysqlIO.unpackField(MysqlIO.java:510)
     at com.mysql.jdbc.MysqlIO.getResultSet(MysqlIO.java:285)
     at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1326)
     at com.mysql.jdbc.MysqlIO.sqlQuery(MysqlIO.java:1225)
     at com.mysql.jdbc.Connection.execSQL(Connection.java:2278)
     at com.mysql.jdbc.Connection.execSQL(Connection.java:2225)
     at com.mysql.jdbc.Statement.executeQuery(Statement.java:1163)
     at oracle.mtg.migrationServer.LoadTableData._migrateTableData(LoadTableData.java:563)
     at oracle.mtg.migrationServer.LoadTableData.run(LoadTableData.java:326)
     at oracle.mtg.migration.WorkerThread.run(Worker.java:268)
I appreciate your help in this regards.
Regards,
K

Hi K,
Whats the default character set of you MySQL and Oracle Databases.
What version of JDBC driver are you using?
Is there any unicode characters used in your data?
Have you tried offline data move?
Thanks
Dermot.
Message was edited by:
dooneill

Oracle to Mysql character set conversion problem!!! PLZ IGNORE

Hi Experts,
I have created a database link from Oracle 10g to Mysql 5.
I have installed Oracle Gateway 11g for this purpose.
When i retreive the data from sql plus the text is displayed as question marks.
Oracle 10g Database character set is WE8MSWIN1252
Mysql character set --->latin1
Character set of ODBC connector for mysql is latin7
Character set in the parameter file of HS folder is WE8MSWIN1252When i retrieve data from sql developer the text is fine(as i think it directly takes the character set of target) but
when i login from sqlplus i get question marks!
I have another post in Heterogeneous Connectivity forum
Re: Oracle to Mysql character set conversion problem!!! PLZ HELP
Kindly update your comments there,
@@@@@@@@@@@@@@2
Appreciate your help,
regards
Edited by: user10243788 on Apr 21, 2010 3:25 AM

It is OK to post a globalization-related question in this forum in addition to the forum pertaining to the main technology. Not all experts follow all possible forums on OTN. Of course, you should cross-link the posts to let people merge the answers.
Regarding the problem itself, make sure that SQL*Plus has the right NLS_LANG setting in the environment. On Windows, in the Command Prompt:
C:\> set NLS_LANG=.WE8PC850
C:\> sqlplus ...On Unix:
$ setenv NLS_LANG .WE8ISO8859P1 (or NLS_LANG=.WE8ISO8859P1; export NLS_LANG)
$ sqlplus ...-- Sergiusz

Migration mysql à oracle

J'ai besoin de migrer à partir de mysql 5.1 à Oracle 10g j'ai télécharger omwb(oracle migration workbench) mais j'ai message d'erreur Mise en garde "No plugins sont installés".
comment installer les plugins?
quelqu'un pourrait m'aider? merci
Edité par: user8779727 le 17 novembre 2009 01:17

Bonjour,
OMWB est maintenant desupporté et a été remplacé par SQL Developer. OMWB n'est plus utilisable que pour les migrations depuis Informix ou DB2.
Comme OMWB, SQL Developer ne requière pas de licence et peut être téléchargé librement depuis :
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
Sur cette même page, la section "Getting Started" vous donnera toutes les informations nécessaires pour
installer the driver jdbc pour MySQL.
(Contrairement à OMWB, SQL Developer n'utilise pas de plugin, mais vous devrez installer le driver JDBC qui correspond à la base d'origine)
Cordialement,
Jean-Patrick
Hello,
OMWB is now desupported nad has been replaced with SQL Developer. OMWB can now be used only for Informix or DB2 to Oracle migrations.
Like OMWB, SQL Developer does not require a specific license and it can be freely downloaded from :
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
On this page, you will also find all the infos needed to install the the JDBC Driver for MySQL.
(Unlike OMWB, SQL Developer does not use plugin, but you still have to install the JDBC driver built for the database you want to migrate from).
Regards,
Jean-Patrick

Schema capture problem

Hello -
I am doing a test migration on a db from SQL Server 2K5 to Oracle 10g R1 using .
When attempting to capture the SQL Server db, the process begins fine but fails to capture all the tables/stored procedures in the database. In the Migration Log window, the following error is reported:
"oracle.dbtools.metadata.persistence.PersistenceException: Exhausted Results"
Any advice?
Thank you.

I got the same problem here. When I select the option to capture Microsoft SQL Server, a window pops up and seems to gather the objects in the schema. I can see it finds all the tables, indexes, constraints and everything else, but when clicking the close button the message log reports the error above.
The stack trace is this:
java.lang.Exception: oracle.dbtools.metadata.persistence.PersistenceException: Exhausted Results
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:139)
at oracle.dbtools.migration.workbench.core.CaptureInitiator.launch(CaptureInitiator.java:57)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:127)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:551)
at oracle.ide.controller.IdeAction$2.run(IdeAction.java:804)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:823)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:521)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: oracle.dbtools.metadata.persistence.PersistenceException: Conjunto de Resultados Esgotado
at oracle.dbtools.metadata.persistence.PersistenceUtility.getIdForColumn(PersistenceUtility.java:656)
at oracle.dbtools.migration.workbench.plugin.SQLServer7Capturer.captureForeignKeys(SQLServer7Capturer.java:992)
at oracle.dbtools.migration.workbench.plugin.SQLServer7Capturer.captureObjects(SQLServer7Capturer.java:206)
at oracle.dbtools.migration.capture.CaptureWorker.capturePerTable(CaptureWorker.java:568)
at oracle.dbtools.migration.capture.CaptureWorker.captureType(CaptureWorker.java:337)
at oracle.dbtools.migration.capture.CaptureWorker.runCapture(CaptureWorker.java:282)
at oracle.dbtools.migration.workbench.core.ui.CaptureRunner.doWork(CaptureRunner.java:63)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:159)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:532)
at java.lang.Thread.run(Thread.java:595)

MySQL Oracle Hangs

mySQL data transfer hangs at
Creating Oracle Model Truncating every time.
Please Advise
Zach
null

Zach, Keith,
more information is required to figure out why the MIgration Workbench is hanging at the data transfer stage for you. In the OMWB\Logs directory, you will find a file called Error.log - if you forward this to [email protected] (our dedicated support mail address for the Oracle Migration Workbench) we would be happy to look into this problem further for you.
Regards.

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

Auto Commit in Oracle Document Capture

Hi,
I have recently installed and configured Oracle Document Capture 10g as a part of IPM installation. I have configured ODC to Scan, Index and commit to UCM 11g system. Scanning and indexing are going fine without and problem. However, I could not make the commit automatic. Please help me configure an auto-commit, so that I don't have to go to ODC every time and do a manual commit. Or is it possible to auto-commit at all ?
Thank you
Rama

In this case I think the problem is somewhere else. Normally, an indexed batch is committed immediately when you you confirm the message at the end of the last page. For that you don't even need the Commit server configured. Commit server with Indexing is used mainly in use cases, when you want to schedule committing (e.g. to a certain time). I guess the Commit Server is not activated, because the batch is not fully processed. AFAIK, recently released 11g is much better option for small batches.
I'd recommend you to try the Commit Server together with the Import/Recognition Server, which can be fully automated. Maybe this will enable you to understand what the problem with Indexing could be.

As/400 to oracle migration (migrane)

Dear folks,
I am using oracle migration workbench to migrate data from AS/400 to Oracle. When I am capturing/importing data/model from source AS/400 system it shows up the databases available to be imported. Within that column it only shows the AS/400 system name instead of any relational database entry name. Therefore when I import that I only get some system tables and objects not the data files which are on the system. I dont know how to fix that so that it shows the relational database name so that I can import the data files not the system files.
Note: There was not RDB directory entry in the AS400 system but I have created one now.
your help is appreciated.
Munwar Soomro.

Hi Munwar,
Am I correct in saying that you only see the server name in the Capture wizard?
1)If so can you confirm that when you connected that you had privileges to see the database you wanted
2)And if that database physically reside on the machine you connected too.
Regards,
Dermot

Oracle Migration Tool

I recently downloaded the Oracle Migration Tool for migrating a
Microsoft Access database to Oracle8 for Linux. This migration
tool contains the following components:
1. Oracle Installer 3.3.0.1.3
2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
4. Oracle Net8 Client 8.0.4.0.0
5. Oracle Objects for OLE 2.2.2.2.0
6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
7. Oracle8 ODBC Driver 8.0.4.0.0
8. Required Support Files 8.0.4.0.0
I installed everything onto my Windows98 client machine. Once I
did this, I could see the following entries in my Start Menu
under "Oracle for Windows95":
1. Microsoft ODBC Administrator
2. 004002 Class Library Documentation
3. 004022 Bound Controls and Class Library
4. 004022 Control Notes
5. 004022 Release Notes
6. Oracle Home Selector
7. Oracle Installer
8. Oracle Migration Assistant for MS Access
9. Oracle Objects for OLE Documentation
10. Oracle ODBC Help File
11. Oracle ODBC README File
12. Oracle ODBC Test
When I went into the Microsoft ODBC Administrator, I could also
see that there was a new entry under the ODBC Drivers tab:
Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
12/3/97
So far, so good.
Then I started going through the Oracle8 ODBC help file to get
my machine set up to start using the tool. Under "Configuration
Tasks," it says the following:
Before you configure the data source, you must configure Net8
database services, so there is an entry for each Service Name.
To do this, start the Oracle Net8 Assistant, either click on the
Oracle for Windows NT program group and click on the Oracle Net8
Assistant icon or from the start bar select Programs, select
Oracle for Windows NT, and select the Oracle Net8 Assistant.
Using the Oracle Net8 Assistant, you can create an entry in the
tnsnames.ora file for each Service Name. The Oracle Net8
Assistant is installed when you install Net8.
That's when I started running into problems. Although the
installer had shown that Net8 had been installed, I could not
find any evidence of a Net8 Assistant on my Windows98 client
machine. Is there a trick to starting up the Net8 Assistant?
Until I am able to perform this step, I cannot go to the next
step of configuring my ODBC driver.
Any help would be appreciated.
- Brendan
null

Brendan,
I am not 100% sure, but I believe win98 is not supported.... yet.
I know that 95 is supported, but to be honest, I do not run
winDOZE. Maybe an upper authority from Oracle should correct me
if I am wrong.
Kevin
Brendan Conner (guest) wrote:
: I recently downloaded the Oracle Migration Tool for migrating a
: Microsoft Access database to Oracle8 for Linux. This migration
: tool contains the following components:
: 1. Oracle Installer 3.3.0.1.3
: 2. Oracle Migration Assistant for Microsoft Access 8.0.4.0.0
: 3. Oracle Named Pipes Protocol Adapter 8.0.4.0.0
: 4. Oracle Net8 Client 8.0.4.0.0
: 5. Oracle Objects for OLE 2.2.2.2.0
: 6. Oracle TCP/IP Protocol Adapter 8.0.4.0.0
: 7. Oracle8 ODBC Driver 8.0.4.0.0
: 8. Required Support Files 8.0.4.0.0
: I installed everything onto my Windows98 client machine. Once
I
: did this, I could see the following entries in my Start Menu
: under "Oracle for Windows95":
: 1. Microsoft ODBC Administrator
: 2. 004002 Class Library Documentation
: 3. 004022 Bound Controls and Class Library
: 4. 004022 Control Notes
: 5. 004022 Release Notes
: 6. Oracle Home Selector
: 7. Oracle Installer
: 8. Oracle Migration Assistant for MS Access
: 9. Oracle Objects for OLE Documentation
: 10. Oracle ODBC Help File
: 11. Oracle ODBC README File
: 12. Oracle ODBC Test
: When I went into the Microsoft ODBC Administrator, I could also
: see that there was a new entry under the ODBC Drivers tab:
: Oracle ODBC Driver 8.00.0400 Oracle Corporation SQORA32.DLL
: 12/3/97
: So far, so good.
: Then I started going through the Oracle8 ODBC help file to get
: my machine set up to start using the tool. Under
"Configuration
: Tasks," it says the following:
: Before you configure the data source, you must configure Net8
: database services, so there is an entry for each Service Name.
: To do this, start the Oracle Net8 Assistant, either click on
the
: Oracle for Windows NT program group and click on the Oracle
Net8
: Assistant icon or from the start bar select Programs, select
: Oracle for Windows NT, and select the Oracle Net8 Assistant.
: Using the Oracle Net8 Assistant, you can create an entry in the
: tnsnames.ora file for each Service Name. The Oracle Net8
: Assistant is installed when you install Net8.
: That's when I started running into problems. Although the
: installer had shown that Net8 had been installed, I could not
: find any evidence of a Net8 Assistant on my Windows98 client
: machine. Is there a trick to starting up the Net8 Assistant?
: Until I am able to perform this step, I cannot go to the next
: step of configuring my ODBC driver.
: Any help would be appreciated.
: - Brendan
null

Error after Oracle Migration from DMTS into LMTS

Hello ,
I'm sorry, I posted my question again from ABAP General into this forum ABAP Dictionary. I think that here someone can help me in order to proceed with my job in the Development and in production system.
We are using SAP R/3 4.6C, with SAP kernel 2271, Oracle 9.2.0.5 and HP-UX 11.23
I did the Oracle migration from dictionary into locally managed tablespaces on the QTS system (and before that the same migration on a separate system as a copy from production):
1. export data and index tablespace with Oracle export command (exp: for PSAPCLUD and PSAPCLUI)
2. import into file for creation of indexes
3. Drop the data and corresponding index tablesspace with brtools - brspace
4. recreate the tablespaces with sapdba or with sqlplus (using the ddl scripts created before dropping the tablespaces) - - I think is my problem
5. import the data with Oracle import command
6. import the indexes from the previously created sql file
7. check optimizer statistics, analyze and next extents
But there is one problem.
Because I have also used the sapdba and ddl sql for recreating the tablespaces, I didn't specify the SAP data class for the newly created tablespace.
And in the tables TAORA, IAORA and DDART (what is very unclear for me) 3 rows missing for the USER1, TEMP and ??? data class.
If you try to import some transport in the corresponding tablespace which data class is missing an error ocur.
I have read the Note 646681 - Reorganizing tables with BRSPACE, and I saw the part: If the <reorg_tsp> tablespace contains any of the following tables: SDBAH,SDBAD,DBAML,DBATL,MLICHECK,TGORA,IGORA,TSORA,TAORA, IAORA,SVERS,DD02L,DD09L,DDNTT,DDART,DARTT or SAPLIKEY (SAPLIKEY is only available in NetWeaver 2004s or higher), then you should move them to the tablespace <aux_tsp> by online reorganization using BRSPACE:
brspace -f tbreorg -t <table_list> -n <aux_tsp>
Do you have the same problem?
Do you know how I can solve the problem now after the hole migration was done?
How can I dedicate tablespace data class?
Is it enought to just enter the same rows into the TAORA, IAORA and DDART?
Thanks,
Many regards,
Ruzica

Apparently you are trying to mix 32-bit code and 64-bit code. You must ensure that the 32-bit or 64-bit option is used consistently on every command, compiling and linking. The form of the option can depend on the version of the C compiler you are using, and whether you are on an x86 or sparc system. Consult the Pro*C and C compiler documentation.

Queries regarding DB2 to Oracle migration

Hi,
I am new to working on Oracle Migration Workbench and DB2. We are evaluating Oracle Migration Workbench (OMWB )for migrating our client's database which is on DB2 Version 5 Release 2 to Oracle. Request clarifications on below listed questions:
1/ Is OMWB capable of migrating database which is on DB2 Version 5 Release 2 to Oracle?
2/ When I connected to the AS/400 system using Capture Wizard, the system just stays on the Source Database Window with the message "Capturing Source Database..." for an unusually long time. Is there anyway to figureout if the process is going on fine or if there is an issue?
Thank you.
Regards,
Balu

To answer you first question, we don't support that version. You will need to seek an alternative tool, like for example SQL Ways from Ispirer
http://www.ispirer.com/products/
Donal

Download Oracle Migration Workbench

I try to download Oracle Migration Workbench Release 2.0.2 Production for Windows
but on every url (i.E.
http://download.oracle.com/otn/nt/omwb/202/omwb_20200.exe
http://download.oracle.com/otn/nt/omwb/202/omwb_202_002.exe)
I got a server error "page can't be displayed"
Is there a problem with the server?
Regards
R|diger

Can you try the links in this [url http://forums.oracle.com/forums/thread.jsp?forum=36&thread=307420] thread and let us know how it goes.
OTN

Oracle Migration Tool giving Access denied error for Read operation

Hi;
Oracle Migration tool is giving access denied error when we are trying to Read a record for Access Profiles.
We are getting (SBL-ODS-50085) error.This is happening only for few records(Access Profiles).
Although the user role is administrator having full access and privilege (Manage User and Access checked).
Pl. help me resolve the issue.
Thanks!

Hi,
Does it happen when you try to read "any" Access Profile?
If yes, please have a look at the
"Admin: Users and Access Controls - Manage Users and Access - Manage Users and establish User Quotas. Define Access Profiles, Roles and Groups to manage data access controls." privilege in the role of the user you use for migration.
In order to avoid any problem, I usually create a "Migration" role temporarily and assign this role ALL the privileges to avoid such failures at the time of export.
Hope this helps,
Best regards,
Charles DUBANT.
http://www.dubant.com/

Mysql oracle migration capture problem

Similar Messages

Maybe you are looking for