MySQL System DSN: Host is not allowed to connect to this MySQL Server

Hi all,
I'm creating a FileMaker database to keep track of support and to-do items, for a large forum-site I'm managing here in Denmark.
The site runs on our webhosts servers, but I have a MacMini server we use for development. I'd like to connect the MacMini's MySQL server to FileMaker, and have purchased Actuals ODBC pack witch works great. I can connect to the MySQL server on the MacMini via Navicat, by enabling an SHH Tunnel.
When trying to create a System DSN via the Actual ODBC drivers, to connect to the MacMini, I get this error:
Link to screenshot: http://img.skitch.com/20100104-82xe6j7x9b8cjmj357t33p9sb1.png
The one very strange thing is, that the Mac I'm trying to connect from, is at 192.168.1.15 and not 10.0.0.5! The MacMini is at 10.0.0.2 so it makes no sense what so ever, and as I said, I can connect fine to 10.0.0.2 via Navicat, even though it only works when I enable SSH Tunneling.
But of course the Actual ODBC (or any for that matter?!) drivers does not support creating an SSH Tunnel, so I need to be able to connect directly to the MacMini's SQL-server, but when I try I get the above error.
Port 3306 IS open on the server, so I must be overlooking something obvious. I've tried to change the socket when setting up the System DSN to /var/mysql/mysql.sock or /var/mysql but that changes nothing.Ohh yeah, that is ignored for remote servers by the way!
Can anyone help? How do you guys setup your System DSN to a Mac-server with Snow Leopard Server on it?
Thank you so much in advance
Thomas
PS: I can connect fine to our Webhosts MySQL server with the Actual Drivers, but to decrease load on that server, I'd like to get the data for the FileMaker Support Database from our development-server instead!

bump
Anyone got an idea on this? If I've posted in the wrong forum, please advise, because I was a little in doubt as to where this was to be placed

Similar Messages

  • The host is not authorized to connect to this Backup Server

    Hi experts,
    I'm trying to connect to a remote backup server S2_BS running on VM2 from a data server S1 running on VM1. When I issued following command in isql
    1> SYB_BACKUP...sp_who
    2> go
    Msg 7221, Level 14, State 2:
    Server 'S1', Line 1:
    Login to site 'SYB_BACKUP' failed.
    It failed to connect to its SYB_BACKUP (i.e. S2_BS is configured for SYB_BACKUP in this case).
    And I got following error in the error log of S2_BS:
    Jun 23 14:48:53 2014: Backup Server: 2.24.2.1: The host '10.43.13.204' is not authorized to connect to this Backup Server.
    Jun 23 14:48:53 2014: Backup Server: 2.6.2.10: Login information unavailable.
    I can ping VM2 from VM1 without any issue:
    $ ping 10.43.13.204
    PING 10.43.13.204 (10.43.13.204) 56(84) bytes of data.
    64 bytes from 10.43.13.204: icmp_seq=1 ttl=64 time=0.035 ms
    And have entry for S2_BS in /opt/sybase/interfaces on VM1:
    S2_BS
            master tcp ether 10.43.11.19 5002
            query tcp ether 10.43.11.19 5002
    And S2_BS is running correctly on VM2.
    I'm running ASE 15.7 SP110 on both VM1 and VM2.
    Could someone please let me know how to fix this?

    The message is due to a new security feature.  See Remote Dump Host Control
    for details on how to register your host with the remote backupserver.
    -bret

  • I have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !x

    i have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !

    What error message ar eyou getting. Why do you say it will not allow you to download?
    Verify you meet all the system requirements:
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store

  • SQL Developer Blocked and is not allowed to connect to database ORA-200001

    SQL Developer Blocked and is not allowed to connect to database gives ORA-200001.
    i found on net that DBA can write triggers which can deny connection to database from certain appplication.
    so i want a way to change application name so that when it connects to database
    the V$SESSION will have different value (other than SQL Developer) in column PROGRAM and/or MODULE (which i think is used by dba to restrict the connection).
    one more way is
    i am using jdbc url to connect to database
    in java we can change properties of connection to change the PROGRAM in V$SESSION.
    but i am not java expert so dont know how and where to make the changes
    either way my aim is to connect to database such that V$SESSION will have different value (other than "SQL Developer") in column PROGRAM and/or MODULE

    This is not system configration or credential issue.
    This is a check which is put DBA using logon trigger
    to check certain user loging in using certain application.
    only some users using particular username are getting this error when they try to logon using oracle sql developer
    the same users when uses different username(some generic user names created to access database) to access the same database then they are able to login.
    similarly if they login using SQL navigator they are able to login with both their own and the generic user name
    more over of all the database instances this is only happening on some of the instances and all of them are development instances.
    following will help you understand
    USER | DBUSERNAME | DATABASE | APPLICATION | ACTION
    X | X | DB1 | Oracle Sql Developer | Blocked
    X | G(Genric) | DB1 | Oracle Sql Developer | Login Success
    X | X | DB1 | Sql Navigator/SqlPLus | Login Success
    X | G(Genric) | DB1 | Sql Navigator/SqlPLus | Login Success
    X | X | DB2 | Oracle Sql Developer | Login Success
    X | G(Genric) | DB2 | Oracle Sql Developer | Login Success
    X | X | DB2 | Sql Navigator/SqlPLus | Login Success
    X | G(Genric) | DB2 | Sql Navigator/SqlPLus | Login Success
    I just want to bypass this check which i think uses V$SESSION and columns PROGRAM and/or MODULE to check the application used by particular user.
    if i can override these values some where in oracle sql developer before loging in the DB then i can clearly pass this check and login to database.
    Edited by: user13430736 on Jun 21, 2011 4:05 AM
    Edited by: user13430736 on Jun 21, 2011 4:12 AM

  • Untrusted apps are not allowed to connect to or launch Window Server before login.

    I'm getting this with the Citrix Receiver uninstaller from the command line... but not on all Mountain Lion 10.8.5 systems.  Googling turns up a lot of ideas about a problem with the app or in pre/post-flight scripts, but since it works on some, I wonder.  What is the mechanism that generates this error?  I'm guessing there's some setting or condition that exists on one system that isn't true on the other.  How do I find out?
    Sep 25 10:55:21 palms sudo[74325]:  joliver : TTY=ttys000 ; PWD=/Users/joliver ; USER=root ; COMMAND=/Volumes/Citrix Receiver/Uninstall Citrix Receiver.app/Contents/MacOS/Uninstall Citrix Receiver --nogui
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: 3891612: (connect_and_check) Untrusted apps are not allowed to connect to or launch Window Server before login.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorFailure: This user is not allowed access to the window system right now.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
    Sep 25 10:55:21 --- last message repeated 3 times ---
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSRegisterConnectionNotifyProc called with invalid connection
    Sep 25 10:55:21 --- last message repeated 2 times ---
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetDockRect: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetCurrentDisplayMode: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetCurrentCursorLocation: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: CGSGetDisplayBounds: Invalid display 0x00000000
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSGetEventPort: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: CGSSetConnectionProperty: Invalid connection
    Sep 25 10:55:21 palms Uninstall Citrix Receiver[74326]: kCGErrorInvalidConnection: Error enabling suspendResume handling

    Contact Wacom. Unless they have updated drivers there is no workaround.
    Update or remove Quicksilver.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Hi All. I reluctantly upgraded to IOS 7 last night and now cannot access my home WIFI, all other non Apple devices are fine. I have reset, it will not allow me to 'forget this network', doesnt show the option. I have turned on and off

    Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks

    Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

  • I am trying to burn a dvd and it will not allow me to do this because it states that i do not have enough space for encoding disk. how do i free up space and from where?

    I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?

    iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process.  25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
    To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
    Please note that iDVD can't use and external hard drive for this "scratch space".

  • I have just subscribed for a monthly billing for my acorbat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's

    i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?

    Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.

  • I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    Shoeb, hi.
    Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

  • Not allowing bluetooth connection to car hands free

    Hi
    I have a blackberry curve 8520 and a Bury hands free kit.
    Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
    Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
    If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
    I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
    I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
    What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
    Any help would be great.
    Thanks

    as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • ERROR: policy does not allow granting permissions at this level outlook

    Hi All,
    Our users are attempting to send sharing requests to each other via Right Click Calendar | Share | Share Calendar
    Availabilty only works fine but Limited and Full Access fails with the error: policy does not allow granting permissions at this level.
    I can see that the default sharing policy is set for availabilty only so I assume I need to add our internal SMTP addresses to the sharing policy with increased right's.
    But... From our testing in our LAB we found that if the exchange org does not have a connection to the federation setup it works fine straigh out of the box.
    Does this sound right or is my LAB just messing with me?
    Cheers
    Josh

    Hi VK, looks like these threads should resolve your problem:
    Assembly does not allow partially trusted
    callers                        
    "That assembly
    does not allow partially trusted callers."                        
    That assembly does not allow
    partially trusted callers                        
    Assembly does not allow partially
    trusted callers.                        
    WPF Assembly does not allow
    partially trusted callers
    cameron rautmann

  • I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
    Jim

  • When replying to an email I get a response that the recipient was rejected by the server because it does not allow relaying, what is this message?

    when replying to an email I get a response that teh recipient was rejected by teh server because it does not allow relaying, what is this from?

    reset the phone
    reset network setting
    remove and re add the account

  • Aur-general "You are not allowed to post to this mailing list"

    I found a font I needed a few days ago that I couldn't find in the AUR, so I made a package and threw it up on the AUR. A few days later, when I realized I didn't even end up installing it after the packaging, I searched for it to download and install it, only to find there was a package of that font from half a year ago, so I figured I'd go report my package for deletion.
    The AUR wiki page states that removal requests should be emailed to aur-general. When doing this, I get an automated response from aur-general-owner stating:
    "You are not allowed to post to this mailing list, and your message has
    been automatically rejected.  If you think that your messages are
    being rejected in error, contact the mailing list owner at
    [email protected]"
    How do I get permission to send my removal request? And if getting permission requires something not so easy, could someone forward the email for me?

    https://mailman.archlinux.org/mailman/l … ur-general did you read this?

Maybe you are looking for