N70 dead

Hi,
Iäve got a problem with my N70 i updated my phone with the firmware update and it came through most of it but then just said that it's cancelled.
If I run software updater again it says that it doesn't need an update, but I can't get the phone on!!!!!
If I check device maanger it says that "Nokia BB5 ADL Loader USB Generic" and "Nokia BB5 ADL Loader USB Phone Parent".
Is there anything I can do? Also I wonder the phone was a gift from Nokia to my father at a "Nokia Analyst Meeting" in the US. So he didn't get an reciept. Does anyone know how I can continue from this point or is it just screwed :/.

The warranty depends on the country it was purchased in - not all phones' warranties are valid in all countries... worth checking out before you take it in, it may end up in a nasty charge otherwise... possibly
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

Switch on problem Nokia N70

Maybe someone can help me with the following problem. My Nokia N70 is flat dead, it won´t switch on. It went like this.. The battery had to be charged. After it indicated that the battery was charged, I tried to switch it on. I saw two nokia logo´s but the screen stayed white. It didn´t want to start up. After I disconnected the adapter, it went dead. I brought it to a certified nokia repair shop and they fixed it for me. According to them, it was an issue with the power button. They said it was not covered by that garanty. Makes you think what the **bleep** is covered by that garanty... Like I almost never touch that power button, only when it´s gone dead! Guess what, two weeks later I have the same problem! I like to talk to somebody from Nokia, but it seems bloody difficult. For an aspiringjournalist like me, this phone is an indispensible tool!

If the phone is now out of it's warranty duration. You really need to pay for the parts and the labor that the Nokia Service Centre offers.
If there's a need to report your problem to Nokia, you may freely send an email to this page below:
http://www.nokia.co.uk/A4222231
Good luck

Problem to my N70 please help me

My N70 fails to function at regular interval(phone fully dead and not even able to swith off) and restarts after some time.Again after some minutus it repeats..please help me

Hi ksjinesh
Provided that you have backed up your phone data you could try resetting your N70 *#7370#
Happy to have helped forum in a small way with a Support Ratio = 37.0

E72 - dead pixel

i'm so upset and disappointed with nokia. it's only 1 week, and my e72 has got a dead pixel on the screen!! never have i drop the phone before. no water got to it before too. what a quality for such hi-end phone (a newly launched one too!) from the big brand nokia. my 10yrs of trust that i have towards nokia is destroyed with this dead pixel!!
i know i must send it to the service center. i know the service will be free since it's still on warranty. it's the inconvenience that matters. it's the hassle travelling to service center with all the traffic jam around klang valley. oh not to mention the waiting-time for my phone to be fixed.

All LCD Devices suffer from the risk of dead pixels...
As you've only had it a week, depending on where you live, you should have 14 days or so to return if you're not happy about it for any reason... I'd recommend returning it and getting a new one from elsewhere.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

N70 Wont update firmware :(

Hi all.
Is anyone else having trouble updating their N70?
When i try to use the software it says im already running the most up to date version of the firmware however people in other threads are saying they have considerably higher version than mine.
My fone says it is...
V 3.0546.2.3
18-11-05
RM-84
My code is 0529237
Before i tried to update i downloaded and installed the latest versions of PC Suite, Cable Driver and NSU.
Is there anyway to manually download/update my fones firmware?
Any ideas/help much appreciated.
Thanks in advance,
Dave

Nokia is the one who builds new firmware based on operator requests, but Nokia cannot distribute it before operator (in this case O2) has approved it. Without knowing specifically what is the issue in your phone I would suggest you to be in contact with local Nokia Service Point or to your operator to check if there is newer fw available that way. If no success, I'd suggest you keep bugging the operator, so they will either approve new fw or pressure Nokia to make new one... (dunno which one is the case here)BTW, have you tried to call or email to Nokia Care? They may be able to help you fixing your issue even if there is no new fw available.
Unfortunately there is no way to manually update your phone fw. If you try to do some 'experiments', you may end up into situation where you lose the warranty, or in worst case - dead phone.

N70 app installation issues

Hi, i have some issues with my n70. The problem here is that any applications I install into the mmc, although successful, will not appear on the 'My Own' folder, and also won't show up on the 'Manager' program. If I select 'Phone Memory' as the location, it will be installed and will show up on My Own and Manager and works fine.
All I remember was before it acted like this, I was sleeping on my lunchbreak and set it to vibrate after an hour. When I woke up, I noticed the theme reverted back to the plain nokia. I reapplied the custom theme but it returned a "Corrupted" theme error. All my applications thats installed on the mmc stopped working. I also noticed other issues like when I transferred 6 applications on the mmc to reinstall my lost apps.
I installed the x-plore, checked my owns folder and its not there, I went back to the mmc and out of 6 apps I transferred from my pc, only 2 of them left. The other 4 are gone.
Is my MMC dead? is this caused by a virus? I like to think the mmc is just dead but my mind keeps suspecting a virus. The only think I did thats not good was to accept a BT file transfer from an unknown person but after it was downloaded, I deleted it immediately

I have a similar issue where according to iTunes, all of my apps have been installed and the phone sees that they have taken up about 800 MB of memory, yet there is not one app visible on the springboard, it's as if they are hidden. I can't relate to have some show and some not, I just have an empty springboard with all of the default apps on it.

I have 2 dead pixels on my N80

Does anyone know Nokia's policy on dead pixels? Or should I said it back to the Carfphone Warehouse as I've had it less than a month and also it is insured?

Try the Carphone Warehouse first - see if you can get it replaced... to me, a replacement will always be more favourable to a repaired handset...
If not, see what they suggest... though I'd be inclined to take it to my nearest Nokia Service Centre (www.nokia.com/repair) - some of these Service Centres are in Carphone Warehouses though, so you may be in luck...
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

N70 not gettin connected to my computer

Hi... My N70 is not getting linked with my computer. When I connect my phone using cable, it is getting detected. but when i open the N70 folder found in Nokia Browser, it shows a message "NOT SUPPORTED". Someone plz do the needfull. :-(

Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
Anyway, just hard reset your iPod, so that we can start from scratch
1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
2. Connect it back to your Notebook or Desktop.
if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
Good luck!

Stuck: Need Disk repair but DVD drive dead and only have USB 1

[1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
(The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
Disk Utility reports three things:
1. Incorrect number of thread records
2. Volume Bit Map needs minor repair
3. Checking volume information.
Volume free block count",0) [I might have mangled this line]
(It should be 13438611 instead of 13437937)
Here is the GOOD (but these are useless as explained under the "Bad"):
- I have a Tiger 10.4 boot DVD for a repair ==>but see below
- I also have a Disk Warrior disk (never used)
Here is the BAD:
- My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
- I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
Questions:
1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
Thanks,
Bill

Jeff and Michael,
Thank you both for your generous and thoughtful input.
Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
fsck -fy in Single User Mode
I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
Thanks,
Bilil

New C310 - Wireless working FAIL - Printer's wireless network seems to be dead

Product: HP Photosmart Premium C310
OS: Windows Vista 64 bit and Windows 7 64 Bit
Error: Wireless working: FAIL
Changes: No changes since this is the first install of this printer ever
Description:
I've just unpacked my new C310 as a replacement for my older HP Inktjet 3845.
But when trying to install the wireless network everything I try seems to fail.
Printer doesn't detect my wireless network (blue wireless led is blinking 1sec on - 1sec off )
HP Network test tool on my laptop (standing next to the printer to test it's location ) gives no issues whatsoever, wireless network is strong and working very well.
Settings of the wifi connection are WPA security, no WPS, Channel 11, ... .
When I run a Wireless Network Test report from the printer menu, the result is (= printout)
* Wireless On => PASS
* Wireless Working => FAIL
* All the other points below are on status NOT RUN so no connection at all ...
Solutions tested:
Tried to reboot printer while waiting 1 minute in between => No result
Reset to factory settings straight on the printer => No result
Tried to run the Wireless network Setup Wizzard several times without merit.
Explanations on the forums seemed to be that this might be a faulty wireless network card in the printer?
Since this is one of the reasons of buying this item, I do need it to work.
Can anyone provide me advice/next steps?
Kind regards,
Raf

Great info and troubleshooting, thanks!
Unfortunately, I think you have a dead radio. This is how to contact HP support: www.hp.com/go/totalcare
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Saving the data from a dead library

So I've given up trying to rebuild my library (see here: http://discussions.apple.com/thread.jspa?messageID=11544400&#11544400) and was wondering if anyone had any thoughts on how I could extract the projects from an Aperture 3 library.
In an Aperture 2 library you could view the package contents and each project was bundled into a package along with all setting, versions, etc. This is not the case with A3. If you view the package contents of and A3 library everything is spread out. Masters, Projects, Folders and Version are separate from one another.
Any thoughts?
I've many of my projects backed up but recent work that consisted of a lot of image processing is now lost in the dead library.

I think I have recovered my library. I'm in the process of checking the projects to see if they are all intact.
Here is what I did:
1: Created a new empty library
2: Quit Aperture
3: Viewed the contents of the package of the new library and viewed the contents of the old damaged library
4: Moved the "Masters" folder from the old to the new library
5: Moved the "Aperture.aplib" folder from the old to the new library
6: Moved the "ApertureData.xml" file from the old to the new library
7: I then opened the "Database" folder in the old library and copied the following folders: "Albums", "Folders" and "Versions"
Everything else I left behind.
I then launched Aperture by doubleclicking on the new library while holding the Command and Alt keys and selected "Rebuild Library" from the Library First Aid panel.
Aperture then began processing all the content. 10900 images later Aperture launched showing all projects and images.
Looks good so far...

Creative Zen 32GB - Is it Dead?

Hi. I bought a Creative Zen 32gb Flash player in January 2009.
It was mostly OK for the first year or so. By then, it was almost full.
Last summer, it began crashing on me every so often. I assumed it was just because it was almost full, but as time went on it crashed more and more.
Sometimes it would play slightly garbled songs, almost like in the good old days when your cassette deck would chew up your D-90s.
When using the locking function, it would crash completely, requiring the judicious use of a pin to reset it.
Then it would crash when plugging it into headphones or the cable connecting to my AUX port on my car stereo.
The other day, it crashed and I thought - right, its been going a couple of years now, I'll back it up and then go into recovery mode, clean up the memory and then reboot, as recommended in the user guide. I tried backing up the player but it got about halfway through and crashed out.
I then thought to hell with it - I've got most of my music backed up anyway, and the clean up might not mess with it too much, so I tried to follow the cleanup instructions but everytime I let go of the Play button, it would crash out.
If I held the play button down, it would work, but the buttons are so close together, if I changed pressure on the play button while selecting "clean up", it would crash out. Still, I thought I'd managed it but it would not restart or dock, or pretty much do anything except let me go into recovery mode (while pressing Play, of course).
I then thought I'd just reformat the player - again, through the recovery menu since it would not dock with my PC (Win Vista, 32bit). That made no difference. It would not start, would not dock etc etc.
I then thought I would upgrade the firmware, downloaded it from Creative, and managed to get it to go so far, before it crashed out. And that's it - I can just about get it to start, sometimes, and then the screen will go black, or white, or red and black striped once. It will not dock at all. I can press reset as much as I like but the best I can get it to do is get to the recovery menu for a few seconds before crashing, or I can get it to display the Creative logo for a few seconds before, again, it crashes.
Its sat right now with a black screen and the blue light on. I cannot turn it off, or get any response from it at all.
So, is this now a dead mp3 player? Is it likely a hardware fault? If firmware/software, is there any way to fix this or should I just chalk this up to experience and accept that ?60 odd of mp3 player just isn't built to last very long?
And if its dead, what to replace it's I want Creative stuff to be better than it seems to be, and I am loathe to buy iPod. Sony? Wife has one and its fine, but not enough storage. Any recommendations?

Stormgeer wrote:
I've had my Zen32GB for a year and have loved it up to this morning. I added a few photos to it and now its been stuck in "Rebuilding" for the last two hours. I can dock it and get into it, copy files, etc, but it will not play. I have been using a handy pin to reset it, then it goes back into Rebuilding. It doesn't appear to be a hardware problem as the buttons were working fine. A lost cause?
On the recovery mode screen, can you try doing a CleanUp>Reboot?

How to I unauthorize iTunes on a Mac that no longer works, it's dead.

I had a G3 that sadly, is dead and living with Jesus now. The mother board is dead on it. A Mac friend of mine was able to get all my data, including all my iTunes music and videos off the dead G3 and migrate onto a used G5 that I bought from a mutual friend of ours, so when I logged onto the G5 that I just bought, I had to authorize it for iTunes, but my problem is my old dead G3 is still authorized for iTunes, but it won't even boot up any more. It's unusable. How do I unauthorize iTunes on that old G3? I don't want of my five authorizations being wasted on a machine that doesn't even work. Any suggestions?

Click here for information, or fill out this form.
(35361)

Dead keys in keyboard no longer working

I use "us-acentos" keymap and since 2014-09-24 upgrade the dead keys are no longer working: typing apostrophe followed by "e" should print "é" but instead it just prints the apostrophe.
This under X both in bash and in a graphical editor such as leafpad, geany, netbeans. In a non-X session the dead keys do not work either, an apostrophe followed by "e" will just display a space.
Would anyone have any suggestion as to why this happened and how to correct it? Thank you.
Output of locale-ctl status:
System locale: LANG=fr_CA.UTF-8;
VC Keymap: us-acentos;
X11 Layout: n/a.
Output of pacman.log:
[2014-09-24 16:59] [PACMAN] starting full system upgrade
[2014-09-24 17:03] [PACMAN] upgraded bash (4.3.024-1 -> 4.3.024-2)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-utils (20140325-2)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-mozilla (3.17-3)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-cacert (20140824-1)
[2014-09-24 17:03] [PACMAN] upgraded ca-certificates (20140325-1 -> 20140325-2)
[2014-09-24 17:03] [PACMAN] upgraded efivar (0.10.8.g81d0146-1 -> 0.11-1)
[2014-09-24 17:03] [PACMAN] upgraded efibootmgr (0.7.0.16.g099e110-1 -> 0.8.0-1)
[2014-09-24 17:03] [PACMAN] upgraded rtmpdump (20131205-1 -> 20140918-2)
[2014-09-24 17:03] [PACMAN] upgraded libx264 (1:142.20140826-1 -> 1:142.20140826-2)
[2014-09-24 17:03] [PACMAN] upgraded ffmpeg (1:2.3.3-2 -> 1:2.4.1-1)
[2014-09-24 17:03] [PACMAN] upgraded nspr (4.10.6-1 -> 4.10.7-1)
[2014-09-24 17:03] [PACMAN] upgraded nss (3.16.3-1 -> 3.17-3)
[2014-09-24 17:03] [PACMAN] upgraded firefox (32.0.1-1 -> 32.0.2-1)
[2014-09-24 17:03] [PACMAN] upgraded firefox-i18n-fr (32.0.1-1 -> 32.0.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gegl (0.2.0-11 -> 0.2.0-12)
[2014-09-24 17:03] [PACMAN] upgraded gstreamer (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gst-plugins-base-libs (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gst-plugins-base (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded k3b (2.0.2-9 -> 2.0.2-10)
[2014-09-24 17:03] [PACMAN] upgraded libgpg-error (1.14-1 -> 1.16-1)
[2014-09-24 17:03] [PACMAN] upgraded libtirpc (0.2.4-1 -> 0.2.5-1)
[2014-09-24 17:03] [PACMAN] upgraded xine-lib (1.2.6-1 -> 1.2.6-2)
[2014-09-24 17:03] [PACMAN] upgraded opencv (2.4.9-4 -> 2.4.9-5)
[2014-09-24 17:03] [PACMAN] upgraded openresolv (3.5.7-1 -> 3.5.7-2)
[2014-09-24 17:03] [PACMAN] upgraded openscenegraph (3.2.1-1 -> 3.2.1-2)
[2014-09-24 17:03] [PACMAN] upgraded perl (5.20.0-5 -> 5.20.1-1)
[2014-09-24 17:03] [PACMAN] upgraded python2 (2.7.8-1 -> 2.7.8-2)
[2014-09-24 17:03] [PACMAN] upgraded x264 (1:142.20140826-1 -> 1:142.20140826-2)
[2014-09-24 17:03] [PACMAN] upgraded xorg-server-common (1.16.0-6 -> 1.16.1-1)
[2014-09-24 17:03] [PACMAN] upgraded xorg-server (1.16.0-6 -> 1.16.1-1)
[2014-09-24 17:03] [PACMAN] upgraded xz (5.0.6-1 -> 5.0.7-1)

Follow-up:
1) I could restore the keyboard in X with this command:
$ localectl set-x11-keymap us pc104 alt-intl
which creates /etc/X11/xorg.conf.d/00-keyboard.conf:
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
Option "XkbVariant" "intl"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
another option that worked was to rename /etc/X11/xorg.conf.d/10-evdev.conf.pacsave to /etc/X11/xorg.conf.d/10-evdev.conf, which also contained the "XkbLayout" and "XkbVariant" lines under "InputClass" (the original file had been renamed to .pacsave in February 2013). See wiki:
https://wiki.archlinux.org/index.php/Ke … on_in_Xorg
The output from localectl status now reads:
System Locale: LANG=fr_CA.UTF-8
VC Keymap: us-acentos
X11 Layout: us
X11 Model: pc105
X11 Variant: intl
X11 Options: terminate:ctrl_alt_bksp
So it seems that the result of an earlier upgrade was to "unset" the keyboard for X (compare with output from localectl status in original post). Why?
2) the keyboard in console (out of X) is still not working. If I try to set it to "us-alt-intl" in /etc/vconsole.conf, it works as "us" should (no dead keys); it I use "us-acentos" some keys do not work. locale-ctl shows that "us-acentos" does exist (but not "us-alt-intl").
Mystery.

N70 USB driver no longer auto-loaded by Windows

Hi! I've been using PCSuite without problem, until the latest version 6.8. I gave me the infamous init MediaControl problem which took me 3 hours to fix in the end. However, although now the problem is gone, windows no longer automatically loads the driver for N70's usb connection.
In previous cases, the moment I plug in my phone N70 the first time after installing new PCS, Windows will popup "N70 found" and automatically install various drivers. But now after the N70 found message, the Driver Wizard appears, asking for the location of the driver (just like normal case of other hardware installation). Although I managed to manually point each portions to the respective .inf files under Windows\System32\DRVStore\XXX, it just doesn't behave like before. I tried to plug in my old 6230 and the same things happen, ie. need to manually point each portion to inf files under Windows\System32\DRVStore\XXX
Here's what I've tried for PCS
- Reinstall
- Uninstall from control panel, reinstall
- Repair
I'm at my wit's end. Pls help Message Edited by saukoon on 24-Apr-2006
03:33 AM

alftien,
If you are in the UK it may be a good idea to get in contact with us so our support guys can take a look at this issue.
You can drop us an email, or give us a call from thr Contact Us page.
In fact, even if you are not in the UK, still might be a good idea to speak with the Nokia support team in your area
Cheers
Karim

N70 dead

Similar Messages

Maybe you are looking for