N73 Restarts at beginning of flash then fails!!!

Hi all
i had my phones firmware updated before,but now i can do it at home. it is not branded but when i try to flash it using the NSU, it gets recognised, then it downloads the files, but when it begins to flash the phone restarts right at the beggining(about 1 min in) and then a messgae apears on screen saying Update failed.
i was really hoping i could update my phone so i was just wondering if anyone else had this problem, and if they found a soloution.
thanks

Have you tried a 3 key format or *#7370# format before running the NSU? Might solve the issue
Avi

Similar Messages

Interclue fails to initalise upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time.

Interclue fails to initialize upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time. What would cause this situation. Never had problems with this add-on with Firefox until I downloaded Firefox 4.0. I can disable, re-start, enable,re-start, and it works fine. The same scenario holds true if I uninstall and then re-install add-on.

Just a guess, but I wonder if you have some application or process hanging up that's stopping it from shutting down? You might try closing each application individually and see if this helps.
Good luck!

Downloading flash installer hangs at 30% then fails every time

Hello, I am running a 2012 MBP retina. I download the latest version but the installer pauses for a minute while downloading (at the 30% mark), then fails. "Connection Failed. Unable to complete installation".
I have tried following the solution in this thread:
Flash Player Installer hangs at 95%
But I don't see the .pkg file inside the downloaded .app file. I am not running antivirus and I have rebooted. I have used the uninstaller as well. I am using Safari for this.
Any suggestions?
Thanks,
Chris

Managed to resolve this myself (see this thread: How to perform a "clean install" of Flash Player in Mac OS X)
Thanks for all the replies though

VPN3005 BootCode 4.0 update failure : "flash erase failed"

i become allways an BootCode 4.0 update failure "flash erase failed" !!!
this is the second box (3005)with this behavior.
vpn: Admin ->
1) Concentrator
2) Clients
3) Bootloader
4) Back
vpn: Admin -> 3
WARNING:-- Before beginning the bootloader upgrade, be aware of the following:
o You must first download the latest bootloader from the Cisco website to
your local disk and upload it to the device.
o Before the upgrade, all network interfaces to the device are automatically
shut down and restored afterwards. Because of this, you may want to warn
users of the pending disconnect.
o During the upgrade, reboots are automatically disallowed.
o Do not power off the device during the bootloader upgrade process.
Powering off the device will render it unusable.
Do you really want to upgrade the bootloader? (Y/N) [N] Y
Network interfaces are down ...
64 06/14/2005 07:56:26.860 SEV=3 IP/2 RPT=11
IP Interface 1 status changed to Link Down.
List of Files
CONFIG BOOT-IMG
Name of the file for bootloader upgrade? BOOT-IMG
Bootloader upgrade in process.
This should take about 30 seconds.
DO NOT POWER DOWN THE SYSTEM DURING THIS PROCEDURE!
Bootloader update failure - The flash erase failed
FATAL ERROR: Reboot will render the device unusable.
Retry the bootloader update.
DO NOT REBOOT until the update succeeds.
Network interfaces are restored ...
65 06/14/2005 07:56:32.680 SEV=3 IP/1 RPT=12
IP Interface 1 status changed to Link Up.
System Status
VPN Concentrator Type: 3005
Serial Number: CAM09200421
Bootcode Rev:
Cisco Systems, Inc./VPN 3000 Concentrator Series Version 2.5.Rel Jun 21 2000 18:57:52
Software Rev:
Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.Rel Mar 10 2005 14:58:16
Up For 0:03:01
Up Since 06/20/2005 02:22:21
RAM Size: 64 MB (Memory Status: Green)
Fan | Temperature
Fan 1 Fan 2 | CPU Cage
6027 RPM 5973 RPM 36C/96F 40C/104F
CCO recommends to send in this box to Cisco ! but the new box from my reseller has the same problem / behavior !!!
any idea ?

I did the same thing, TAC support said they've had like 20 people complain about this. He said "there is no reason to update the boot code on a 3005 model. It is only needed on the 3015 and higher models to support RAM chips larger than 256MB." TAC support said DO NOT UPDATE the boot code on the 3005.
I suggested that they make note of this SOMEWHERE in their documentation. He provided me with some hidden low-level commands to erase the boot code, but as he said the 3005 doesn't need v4 of the boot code, and the boot code hasn't been tested for it, it's possible it would just break the concentrator. He then added the only way to 'fix' a damaged boot code is to replace the entire unit. He suggested we not touch it anymore, and leave the boot code running as-shipped.

JVM Error 547 - Flash Write Failed

Hi, i got the 547 error after a long way of many other errors, it start by installing a new app using the stupid DM and my BB restart after the installation and i got 507 error, which mean no software, so i doubt it and tried to pull the battery, sim card and SD, wait for some time, return the battery, and 561 error was there, tried again and nothing
after search on crackberry and blackberry forums, talking about JL and BBSAK, used both to wipe and re-install the OS again,
of course i remove the vendor.xml from common files and user "document and settings" folders
during the installation it load until the net_rim_cldc.cod and restart on its own, and the loader give an error not able to connect again, so i wait until my phone restart with error 507 and click on retry, it stupidly erase every thing again instead of continue from the stop point and it reach the same point and restart, so i fall in a loop
i tried to delay the net_rim_cldc.cod to the end by changing the Platform.alx, and i tried to cancel this file from Platform.alx and it stuck with the truetype font.cod
i remove this OS and i tried to download from a different service provider, "again of course i remove the two files for vendor.xml" but no use
then i used the BBSAK to add manually all the basic files which is 220 modules, and i left the net_rim_cldc.cod to the end, suddenly my phone try to start and keep restarting every 2 minutes, and after several attempts is give me the JVM Error 547 "flash write failed"
no i cannot connect to BBSAK, the only way is to connect to the loader without battery and wait until it finish erasing then i can connect to JL to wipe or BBSAK
but then what?? i will end up between BB apploader which cannot finish the installation and BBSAK which can put the 220 files in 220 steps and the phone will not load
now, any BB genius can help??

Hi maytik and welcome to the BlackBerry Support Community Forums!
Take a look at this article as it should help get you back up and running again:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
Hopefully that helps!
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." Tried suggestions I've seen on the forum.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

Im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything

im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?

I assume the restart was prompted during the installation process?
First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode.

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, its connecting then fails. When someone try to FaceTime me,I try to access but it says connecting then fail

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, it says connecting then fails by ending automatically. When someone try to FaceTime me,I accept but it says connecting then fail. I only have a MacBook Pro to FaceTime and not an iPhone. I was informed that I should be able to FaceTime from my laptop via video call without an iPhone.
Please advise.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
1. The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
2. Connect to a different network, such as a public Wi-Fi hotspot, and try again.

Adobe flash player fails installation

flash player installs 50% then fails to complete IE9 64bit

Hi,
The following link contains the answer to your query: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html. Please read.
Hope the above info helps you.
With regards,
Prabhu

Systemd: some services starting too early and then failing

Hello everyone,
I freshly installed Arch on this new laptop (Asus Zenbook Prime UX32VD) and from the start, I wanted to have a pure systemd setup. I'm using services only and I've uninstalled initscripts and so far it's working relatively well.
However, some services seem to start too early by default and the workarounds are unsatisfactory.
Problem 1: asus-screen-brightness and asus-kbd-backlight
On this lap top, the stock screen brightness buttons do not work (yet). A script and a service file (which are both available via the asus-screen-brightness AUR package) have to be used to allow users to change the brightness via the script. The problem is, with that service enabled, it only succeeds sometimes. About have of the time booting the laptop it fails, most likely because the necessary nodes in /sys/ do not exist yet. Restarting the service manually after booting does the trick:
[root@tachychineta shapeshifter]# sc status asus-screen-brightness
asus-screen-brightness.service - Allow user access to screen brightness
Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
Active: active (exited) since Fri, 12 Oct 2012 11:23:44 +0200; 1min 1s ago
Process: 320 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/asus-screen-brightness.service
Oct 12 11:23:44 tachychineta systemd[1]: Starting Allow user access to screen brightness...
Oct 12 11:23:44 tachychineta sudo[349]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
Oct 12 11:23:44 tachychineta sudo[349]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/max_brightness: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 8: /10: syntax error: operand expected (error token is "/10")
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: /usr/bin/asus-screen-brightness: line 10: 2*: syntax error: operand expected (error token is "*")
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: cat: /sys/class/backlight/intel_backlight/brightness: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chgrp: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
Oct 12 11:23:44 tachychineta asus-screen-brightness[320]: chmod: cannot access ‘/sys/class/backlight/intel_backlight/brightness’: No such file or directory
Oct 12 11:23:44 tachychineta systemd[1]: Started Allow user access to screen brightness.
[root@tachychineta shapeshifter]# sc restart asus-screen-brightness
[root@tachychineta shapeshifter]# sc status asus-screen-brightness
asus-screen-brightness.service - Allow user access to screen brightness
Loaded: loaded (/etc/systemd/system/asus-screen-brightness.service; enabled)
Active: active (exited) since Fri, 12 Oct 2012 11:25:28 +0200; 2s ago
Process: 2547 ExecStop=/usr/bin/asus-screen-brightness disallowusers (code=exited, status=0/SUCCESS)
Process: 2579 ExecStart=/usr/bin/asus-screen-brightness allowusers (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/asus-screen-brightness.service
Oct 12 11:25:28 tachychineta systemd[1]: Starting Allow user access to screen brightness...
Oct 12 11:25:28 tachychineta sudo[2593]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chgrp users /sys/class/backlight/intel_backlight/brightness
Oct 12 11:25:28 tachychineta sudo[2593]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:25:28 tachychineta sudo[2597]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod g+w /sys/class/backlight/intel_backlight/brightness
Oct 12 11:25:28 tachychineta sudo[2597]: pam_unix(sudo:session): session opened for user root by (uid=0)
Oct 12 11:25:28 tachychineta systemd[1]: Started Allow user access to screen brightness.
Exactly the same problem occurs with asus-kbd-backlight.service which is needed to allow users to control the keyboard backlight. It also fails because of missing /sys/ entries if started too early.
Problem 2: automatic login & X11
I use the method described on the wiki to autologin into TTY1 with my user and my .bash_profile contains
[[ $(fgconsole) = 1 ]] && startx
and my .xserverrc is configured as explained in this fantastically useful article by falconindy.
This way, X starts automatically and my session is properly authenticated for things like udiskie. I'm not using [testing] but instead rebuilt polkit with --enable-systemd and it's working just fine. The problem is, just like in problem 1, Xorg fails to start every now and then, failing with
(EE) No devices detected.
I don't have a full log because it hasn't happened in a while, but I'm very certain it's because the chipset isn't ready, yet.
Solutions?
I added "i915" to /etc/modules-load.d/static.conf hoping that would cover both the Xorg and backlight problems but it doesn't help. I then tried adding i915 to my MODULES in mkinitcpio.conf and rebuilding the initramfs and at least it looked like that way the problems went away but it added about 4 seconds to the time spent by the "kernel" during boot which is quite unacceptable. (Plots with and without i915 in MODULES).
I read the systemd.unit and systemd.service man pages but I can't find a way to speficy required kernel modules for a service file. I'm not sure if specifying the modules in /etc/modules-load.d shouldn't be enough (because apparently it's supposed to load for sysinit.target, which is early) but apparently it isn't.
Any ideas how I can get these services to work properly without sacrificing too much boot time?
Thank you
Last edited by Shapeshifter (2012-10-12 10:20:09)

Please fill a bug report.

My G4 beeps 3 times then fails to start up

when I start my powerbook up. It beeps 3 times the front lights flash then it stops. Is this a warning of some sort? In any case I cannot start the machine and am becoming worried that I've lost all my work and docs.
Can anyone please help.
***Urgent***
powerbook G4 Mac OS X (10.4.7)

It beeps 3 times the front lights flash then it stops.
Sorry, I previously failed to notice you also mentioned that the front LED also flashes.
Take a look at here for more information on the PowerBook G4 (15-inch 1.67/1.5GHz) Memory Slot Repair Extension Program.
2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.8) Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX

Users contacts missing after failing over and then failing back pool

We have 2 Lync enterprise pools that are paired.
3 days ago, I failed the central management store, and all users from pool01 to pool02.
This morning, I failed the CMS and all users back from pool02 to pool01.
All users signed back in to Lync and no issues were reported. A user then contacted me to say that his contact list was empty.
I had him sign out and back in to Lync, and also had him sign into Lync from a different workstation, as well as his mobile device. All of which showed his contacts list as empty.
We have unified contacts enabled (Hybrid mode with Office 365 exchange online, and Lync on prem). When I check the users Outlook contacts, I can see all of his contacts listed under "Lync Contacts", along with the current presence of each user.
If I perform an export-csuserdata for that user's userdata, the XML file contained within the ZIP file shows the contacts that he is missing.
I've also checked the client log on the workstation too, and can see that Lync can see the contacts as it lists them in the log. They do not appear in the Lync client though.
Environment details:
Lync 2013 - 2 enterprise pools running the latest December 2014 CU updates.
Lync 2013 clients - running on Windows 8.1. User who is experiencing the issue is running client version 15.0.4675.1000 (32 bit)
I have attempted to re-import the user data using both import-csuserdata (and restarting the front end services) and update-csuserdata. Both of these have had no effect.

Hi Eason,
Thanks for your reply. I've doubled checked and can confirm that only one policy exists, which enables it globally.
I believe this problem relates to issues that always seem to happen when ever our primary pool is failed over to the backup pool, and then failed back.
What I often see is that upon pool failback, things like response group announcements don't play on inbound calls (white noise is heard, followed by the call disconnecting), and agents somehow get signed out of queues (although they appear to be signed in to
the queue when checking their Response Group settings in their Lync client. I've also noticed that every time we fail back, a different user will come to me and report that either their entire contacts list is missing, or that half of their contacts are missing.
I am able to restore these from backup though.
This appears to happen regardless of if the failover to the backup pool is due to a disaster, or to simply perform pool maintenance on our primary pool.

ITunes 6.0.1.3 downloads a video 100%, then fails with "An Unknown Error"

I've downloaded several videos from ITMS but the most recent one I've purchased will complete the download process and then fail. I've tried "check for purchases" several times and always get the same result - download the ~200 MB file, then fail when the progress bar is full.
I've tried disabling Grisoft AntiVirus, defragmenting the hard drive, chkdsk for errors (no errors), but I keep getting the same thing every time - about 8 tries):
[Red X graphic]
There was an error downloading your purchased music.
An unknown error occurred (0xFFFE7958).
Use the Check for Purchased Music command in the Advanced menu to try again later.
[OK]
I don't use iTunes for music - just for video downloads.
Any ideas?
dcs

Same problem here!!!
Three times I tried to download the D.Housewives and three times it failed. I did the check the purchased and was able to start again but everytime it got to either 99% or 100% it failed with a error but on the third time it failed I guess it triggered something and it no longer shows as Purchased Music. I contacted Apple and they told me I am out of luck!
Good thing my Ipod is less then 30 days old as it is going back to the store.
Here is their response after taking my $1.99 but no delivering the product!!!
Dear Steve,
Thank you for contacting the iTunes Music Store.
Per our terms of sale, all music/videos purchased from the iTunes Music Store is ineligible for refund. This policy matches our refund policies on open or downloaded software and provides protection for copy written materials.
For more information, please review all the Terms of Sale for the iTunes Music Store at http://www.apple.com/support/itunes/legal/policies.html.

I am trying to restore my apple tv through my itunes on my laptop, but i cannot get the apple tv device to connect. When i plug it into the laptop, the light begins to flash rapidly. Any suggestions?

I am trying to restore my apple tv through my laptop but i cannot the device to connect. Once a plug it in using a micro usb, the light begins to flash rapidly.
Any suggestions?

make sure you're following the steps exactly (unplug all cables, connect micro USB, if using a 3rd gen reconnect power). Connect directly to computer. Try a different cable

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

N73 Restarts at beginning of flash then fails!!!

Similar Messages

Maybe you are looking for