N73 very slow response after minute of idle

After updating the firmware it take too long to open the phone from standby mode.
Why Nokia had limit the MMS to 300KB only.
Will Nokia manufacturer this a serious note for them to upgrade the firmware to more stable and reliable to use this kind of cell phone?

There are numerous software versions for different regions, network operators etc., so it is difficult to comment on your speed issue without knowing what is the version that you have updated to.
300Kb is a typical limit for MMS, even at network level. Some more recent phones like the N82 could theoretically handle larger MMS messages, but in practice most networks still place a 300Kb limit so what the phone is capable of is irrelevant. You should note that the limit of the receiving phone will also affect this, for example if you sent a 300Kb MMS from your N73 to a friend who owned a 6020, they would not receive it because their phone accepts 100Kb maximum. MMS is a system created only for small messages, and will eventually be completely redundant now that most phones have GPRS/3G/WLAN and e-mail capability.

Similar Messages

Helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.

helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.

Next try the remaining items of:
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

VERY Slow Responses in iTunes When Deleting

Hi,
Can anyone help me with a problem of VERY slow responses in iTunes when I try to delete or amend track information. For example when I click on delete it can take several seconds or more to respond and again when I confirm the deletion or amendment.
I have had this problem for some time now and still occurs after a full re-install of the operating system (Leopard 10.5.8 on a PowerMac Quad processor and iTunes 10.6.3) All the remaining applications work fine just as they should do.
Blackrockguy

Does anyone have an answer for this question? Is there perhaps some outside plug-in that can help?

Very slow response, stopping for seconds in the middle of typing an email

I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.

For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.

Very slow Safari after IOS8 Iphone 5S

Hello all
I live in Iraq, so basically internet here is very slow, however after installing IOS 8, Safari now is very very slow
I tried other browsers and they were a better
any one of you guys have similar issue ?

My iPad and iMac are really screaming after the update. My iPhone 4 is running more slowly. What's odd is that even with it right next to the AEBS it's running slow. The iPhone 4 is listed as 802.11 b/g/n in Airport Utility in the Advanced/Wireless Clients window. When it was running slow, the signal level was OK (actually good-about the same level as the iMac) but the noise was high so the signal to noise ratio was only between 12 and 20 dB. Also the rate was at 5 and staying there 9 (not sure what the rate number is but it was much smaller than all the others clients).
I turned WiFi OFF on the phone then back on again. When it came back, the signal to noise ratio was better (went to about 30-40 dB, and the rate went up to 58. Then after a few minutes, the signal to noise ratio went back to about 20 and the rate number dropped to 5 again.
I'm not sure what this all telling me exactly, but I agree the iPhone seems a bit slower. It's running quite a bit below my 60 day average for download and uplaod speeds - especially a ways away from the AEBS (new 5th gen). The other devices (iMac and iPad are performing as good and even a little better than their 60 day averages.

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites

firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox

Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Bex input help (F4) very slow response times

When running queries on some of our InfoCubes or ODSs (in 3.5 of 2004s) we are getting a very slow response when using the Input Help (F4) option. We have looked at the article the Nov/Dec 2004 BW Expert and the following SAP Notes 626887, 661251, 626887, 817335, 567746, 581802 and 748623. None of these are of much help. We did not seem to have this problem before the upgrade to 2004s.
Anyone have any other ideas? The users are wanting it fixed.

F4 help behaviour has changed in 04s 3.5 web run time.
See attached thread for a solution (not very helpful in some cases.).
/thread/263372 [original link is broken]

New OIF installation - Very slow response from OHS

Hi,
I've installed two instances of OIF 10.1.4.0.1 in order to create a test configuration to test XASP Attribute Sharing (i.e., we are not doing any other profiles).
Both OIF instances are using a separate instance of Sun Directory Server as its User Data Store, and both are using in-memory for Transient Data Store and have no Federation Data Store. Both OIF instances were installed similarly, using the "BASIC" installation choices, and are running on separate Redhat Linux servers.
The problem that we're seeing is very slow (10+ seconds to 30+ seconds) responses, even when we try to access a static HTML test page that we've placed in the OHS htdocs directory.
We've eliminated any networking problems as possibilities by a couple of tests that we've done, including shutting down the OHS and running a small, different test web server listening on port 7777. When we do that, response time for requests from that web server is almost instantaneous.
We are also seeing the same slow response when we try to access the test HTML page from the same server itself.
We have an SR open with Oracle, but so far, we've not been able to identify what the problem might be, so I'm hoping that perhaps someone else may have encountered this problem and have a resolution.
It is really puzzling because, as I said, this is a pretty vanilla default OIF installation, and it is doubly puzzling because even getting a tiny static HTML page is taking 10+ seconds. Also, I had installed OIF 10.1.4.0.1 on a Windows machine previously, and I don't see this problem on that earlier installation.
If anyone here has any insight into this problem, please let me know.
Thanks,
Jim

Hi,
I think I was able to temporarily eliminate this slow response problem. I think that the slow response problem is related to another problem that I posted about in the "Application Server - General" forum (see below, and Port 7200 conflict?
Jim
======= POSTED to Application Server - General forum ============
I think that I was able to temporarily work around this problem, plus another problem that I think is related (see: New OIF installation - Very slow response from OHS
What I did was to just comment out the "include" line for "dms.conf" in the Apache httpd.conf.
Doing that got rid of the "Address already in use" errors I was seeing in Apache error_log and also eliminated the slow response I was seeing from Apache/OHS (see that other post in "Identity Management" forum), BUT I am getting new errors about Apache not being able to find "htdocs/dms/Spy0".
I have the impression that dms is some kind of process monitoring system that Oracle has in 10gAS infrastructure? So, I have some questions:
1) What's the effect of dms not working?
2) Is it possible to just disable dms?
I hope that Oracle support can come up with a "real" fix for both problems, but in the meantime, as long as what I did doesn't break anything else besides dms, we can at least test the OIF stuff.
Jim

Very slow mac after installing yosemite

I have already tried all the online tips (like turning off transparency etc) but nothing works. I have also run Etrecheck and will include the report:
Problem description:
Mac very slow after installing yosemite
EtreCheck version: 2.1.8 (121)
Report generated 25 Mar 2015 16:49:59 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2011) (Technical Specifications)
    iMac - model: iMac12,1
    1 2.7 GHz Intel Core i5 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 0/DIMM1
            Empty
        BANK 1/DIMM1
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6770M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:0:10
Disk Information: ℹ️
    WDC WD1001FALS-403AA0 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (414.76 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5690H
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 5
Gatekeeper: ℹ️
    Mac App Store and identified developers
Adware: ℹ️
    Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
        /Library/Application Support/Avast/components/fileshield/unsigned
    [loaded]    com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
        /Library/Application Support/Avast/components/proxy/unsigned
    [loaded]    com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.avast.update-agent.plist [Click for support]
    [loaded]    com.avast.userinit.plist [Click for support]
    [loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.avast.init.plist [Click for support]
    [loaded]    com.avast.uninstall.plist [Click for support]
    [loaded]    com.avast.update.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    com.teamviewer.Helper.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.avast.home.userinit.plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    Mail    Application (/Applications/Mail.app)
    Google Chrome    Application (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    Open in Internet Explorer
Audio Plug-ins: ℹ️
    WireTapAnywhere: Version: 2.0.0 [Click for support]
3rd Party Preference Panes: ℹ️
    DivX [Click for support]
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 999.35 GB Disk used: 584.59 GB
    Destinations:
        HEIDI [Local]
        Total size: 0 B
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Too small
            Backup size 0 B < (Disk used 584.59 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         1%    CalendarAgent
         1%    Mail
         0%    Google Chrome
         0%    fontd
Top Processes by Memory: ℹ️
    198 MB    Google Chrome
    114 MB    Google Chrome Helper
    94 MB    Mail
    86 MB    Finder
    82 MB    mds_stores
Virtual Memory Information: ℹ️
    61 MB    Free RAM
    1.44 GB    Active RAM
    1.40 GB    Inactive RAM
    906 MB    Wired RAM
    4.92 GB    Page-ins
    64 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 25, 2015, 03:46:40 PM    Self test - passed
    Mar 25, 2015, 11:26:31 AM    /Library/Logs/DiagnosticReports/Preview_2015-03-25-112631_[redacted].hang
    Mar 25, 2015, 11:26:30 AM    /Library/Logs/DiagnosticReports/Preview_2015-03-25-112630_[redacted].hang
    Mar 25, 2015, 11:26:21 AM    /Library/Logs/DiagnosticReports/Preview_2015-03-25-112621_[redacted].hang
    Mar 25, 2015, 10:54:50 AM    /Library/Logs/DiagnosticReports/com.avast.daemon_2015-03-25-105450_[redacted].c pu_resource.diag [Click for details]
    Mar 23, 2015, 12:30:12 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Photoshop CS5.1_2015-03-23-123012_[redacted].crash

I am having problems with slowness, too - ever since installing the latest Yosemite update I downloaded a few days ago. EVERYTHING - Safari, QuickTime, MS Word for Apple, the DVD Player, everything - runs slowly and I get the "rainbow pinwheel of frustration". It's taken me three minutes to type these few sentences. It's really starting to frustrate me. Here is my EtreCheck report:
Problem description:
Since I installed the latest Yosemite update (10.10.2), EVERYTHING runs slowly. I get the rainbow pinwheel whenever I click on anything on Safari, and have trouble typing via Safari; videos stop and start on QuickTime; MS Word for Apple runs slowly - EVERYTHING seems to be slowed down. It took four minutes to get the above sentences typed. Please help me escape the “rainbow pinwheel of failure”!
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 12:56:40 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro6,2
    1 2.66 GHz Intel Core i7 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 16
Video Information: ℹ️
    Intel HD Graphics - VRAM: 288 MB
        Color LCD 1680 x 1050
    NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 4 days 13:7:46
Disk Information: ℹ️
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (67.68 GB free)
            Encrypted AES-XTS Unlocked Converting
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-898 disk3 : (4.13 GB)
USB Information: ℹ️
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Seagate FreeAgent GoFlex 500.11 GB
        EFI (disk2s1) <not mounted> : 210 MB
        Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (9.35 GB free)
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.PTUMWDrv (9.6.8) [Click for support]
    [not loaded]    com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
        /System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.PTUMWCDFree (9.6.8) [Click for support]
    [not loaded]    com.devguru.driver.PTUMWCSP (9.6.8) [Click for support]
    [not loaded]    com.devguru.driver.PTUMWDIAG (9.6.8) [Click for support]
    [not loaded]    com.devguru.driver.PTUMWMdmControl (9.6.8) [Click for support]
    [not loaded]    com.devguru.driver.PTUMWMdmData (9.6.8) [Click for support]
    [not loaded]    com.devguru.driver.PTUMWNMEA (9.6.8) [Click for support]
        /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.installd.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.periodic-monthly.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.tccd.system.plist
    [killed]    com.apple.wdhelper.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.memeo.Memeod.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    CBCStatusMenu    Application (/Applications/Cricket Broadband Connect.app/Contents/Resources/CBCStatusMenu.app)
    EEventManager    Application Hidden (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
    EEventManager    Application (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
    ConnectService    Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
    MemeoAgent    Application (/Library/Application Support/Memeo/Memeo Backup/Agents/MemeoAgent.app)
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10516.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
    AddThis
    Greenhouse
3rd Party Preference Panes: ℹ️
    Citrix Online Plug-in [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 431.20 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 499.76 GB
        Total number of backups: 67
        Oldest backup: 2014-04-22 12:40:59 +0000
        Last backup: 2015-03-26 15:08:56 +0000
        Size of backup disk: Too small
            Backup size 499.76 GB < (Disk used 431.20 GB X 3)
Top Processes by CPU: ℹ️
         4%    WindowServer
         1%    com.apple.WebKit.Networking
         0%    ConnectService
         0%    systemstatsd
         0%    fontd
Top Processes by Memory: ℹ️
    142 MB    Safari
    90 MB    com.apple.WebKit.WebContent
    39 MB    com.apple.WebKit.Networking
    34 MB    com.apple.WebKit.Plugin.64
    34 MB    WindowServer
Virtual Memory Information: ℹ️
    43 MB    Free RAM
    946 MB    Active RAM
    911 MB    Inactive RAM
    967 MB    Wired RAM
    21.68 GB    Page-ins
    870 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 25, 2015, 04:31:02 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_201 5-03-25-163102_[redacted].crash
    Mar 25, 2015, 02:16:40 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-25-141640_[redacted].crash
    Mar 25, 2015, 10:04:38 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Aperture_2015-03-25-100438_[re dacted].crash

Apple track pad very slow connecting after sleep

I have a late 2009 iMac (11,1) running10.10.1. It is very slow (5 to 35 seconds) connecting to my Apple trackpad whether I am logged in when I put the iMac to sleep or whether no one is logged in. I have run EtreCheck and am including the output. I would appreciate anyone offering advice on what to do to get my trackpad to connect quickly.
Thanks,
Hugh McCutchen, Jr.
Problem description:
OS X 10.10.1 takes 5 to 35 seconds to find my Apple trackpad after putting the iMac to sleep.
EtreCheck version: 2.1.1 (104)
Report generated December 6, 2014 at 2:56:37 PM PST
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4-core
12 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
4 GB DDR3 1067 MHz ok
BANK 1/DIMM1
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4850 - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 18:49:12
Disk Information: ℹ️
APPLE HDD HUA722010CLA330 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Oz (disk0s2) / : 999.35 GB (827.58 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
American Power Conversion Back-UPS ES 750 FW:841.I2 .D USB FW:I2
Fujitsu Takamisawa Component Apple Optical USB Mouse
USB Keyboard + 3P HUB
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.firmtek.driver.FT_ATA_Sil3112 (5.3.0) [Support]
[not loaded] com.firmtek.driver.Sil3112DeviceNub (5.3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
[not loaded] com.ni.Fantom.nxtfwdl (1.1.1) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2) [Support]
/System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
[not loaded] com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[running] com.ecamm.iglasses3agent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.barebones.authd.plist [Support]
[loaded] com.barebones.textwrangler.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[invalid?] com.shirtpocket.backupbytime.plist [Support]
User Login Items: ℹ️
SMARTReporter ApplicationHidden (/Applications/SMARTReporter/SMARTReporter.app)
InstUtilLaunch Application (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
OVSHelper: Version: 1.1 [Support]
RealPlayer Plugin: Version: Unknown [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
LogMeIn: Version: 1.0.298 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 2.9.2.0 Release [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Yahoo! Installer 3: Version: 1.0.128 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
WebEx: Version: 1.0 [Support]
Safari Extensions: ℹ️
Translate
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Folding@home [Support]
Growl [Support]
Java [Support]
Kensington MouseWorks [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Oz: Disk size: 999.35 GB Disk used: 171.76 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 57
Oldest backup: 2014-05-05 03:43:59 +0000
Last backup: 2014-12-06 22:48:42 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 171.76 GB X 3)
Top Processes by CPU: ℹ️
      4% WindowServer
      2% SystemUIServer
      1% iStatMenusDaemon
      0% fontd
      0% powerd
Top Processes by Memory: ℹ️
271 MB mds_stores
206 MB com.apple.WebKit.WebContent
193 MB Safari
168 MB softwareupdated
168 MB SystemUIServer
Virtual Memory Information: ℹ️
5.35 GB Free RAM
4.87 GB Active RAM
1.56 GB Inactive RAM
1.10 GB Wired RAM
46.17 GB Page-ins
66 KB Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 09:41:20 AM NETserver_2014-12-06-094120_OZ-2.crash
Dec 4, 2014, 08:07:59 PM Self test - passed

Try the basics first:
   Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
====================
but i will then be without it for weeks which i cannot afford to miss at the minute,
If it does come down that, CALL AppleCare and request a replacement until yours is repaired.

Mid-2010 27" iMac very slow, even after clean OS install - HELP!

Good afternoon guys, I'm hoping someone can offer me some advice.
I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
Thanks in advance,
Col

Just suggesting things right off the bat here-
To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
Or try running Apple Hardware Test a few times back to see if it is a hardware error.
As for the iLife apps they should've come on one of the install discs that shipped with your mac.
If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
See here:Computers that can be upgraded to use OS X Internet Recovery
Good Luck!

Random users getting very slow response when opening messages/attachments or sending email

I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
They see the spinning wheel and sit there until it decides to open or send. If the message is opened and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

Hi,
How about OWA?
If OWA works well, it seems an issue on the Outlook client side.
Please try to run Outlook under safe mode and re-create profile for testing.
Any related error/warning/information message left in App Log?
Also consider the network Bandwidth.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

N73 very slow response after minute of idle

Similar Messages

Maybe you are looking for