N78 WIFI CONNECTION TO DESKTOP COMPUTER

hi there i hav recently purchase n78....its a great phone allround...sometimes i used to get WIFI SIGNAL and i enjoy the net on this phone...now i just want to ask if there is way that i can connect my n78 wifi to my desktop pc....coz i only see SIM INTERNET CONNECTION CONNECTS VERY EASILY...SO I WANT N78 WIFI TO BE CONNECTED TO MY PC...SO PLEASE HELP...

If i am not misstaken you want to surf the net with your PC and use the WIFI of your phone , if this is the case so that won't be a problem ,,, there are some apps can do it for you and one i have in my n78 is JOIKU and works very good , go on line and down load it or just send it to your phone you will find all the info on their site and by the way it is free www.joikuspot.com have fun and enjoy it then let us know how it goes.
The only thing necessary for the triumph of evil , is for good men to do nothing .

Similar Messages

N78 wifi connection problem

Hi all, I am in a great fix.i brought nokia n78 1 year before but i could not surf the web at my home throgh wifi . I have a bsnl wifi connection but when i try to open a page message comes web:no gateway reply and not a single site opens . I have a secured connection . I enter my password which bsnl person dad set while installing router. I cant open even a single site please help me . I will be thankful to you.
Edited upper case
Message Edited by shehanj on 30-Mar-2009 02:27 PM

I installed the 21.002 version and I am in wifi with error: no response from the gateway.
What do I do?
Ip is automatic!
I have done following steps:
First I setup my wifi of my computer.
Start >> Control Panel >> Network Connections >> Wireless Network Connection >> Properties >> Wireless Network >> Preferred Network >> Add >> Network Name (SSID) >> Network Key >> Confirm Network Key >> Uncheck the key is provided for me automatically >> OK.
Then Manually I configure the wifi
Wireless Network Connection >> TCP/IP >> Properties >> check " Use the following Ip Address>>
Ip Address :192.168.1.120
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
Perferred DNS Server : 203.145.184.13
Alternative DNS Server : 203.145.184.32
Then I configure my Mobile Phone
Menu >> Tools >> WLAN >> Refresh WLAN Connection >> Select Available Network >> Edit Access Point >> Option >> Advanced Setting >> IPv4 Setting >>
Phone Ip Address : 192.168.1.109
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
Perferred DNS Server : 203.145.184.13
Alternative DNS Server : 203.145.184.32
But still I am getting while connecting to the internet " No GateWay"
Help me!

Connecting a desktop computer to the Internet via the Mobile Hotspot?

Hello,
I've looked at the other postings about this but I'm still not having any luck....and I'm not really sure who to call for tech support.
I can connect my laptop to the Hotspot just fine. The desktop computer is another story.
I bought a Medialink wireless adapter and installed it per the provided directions BUT the connection says that is local only. How do I fix that?
I don't know for sure a local connection only doesn't allow me to actually connect to the Internet, right? I currently also have AT&T Internet with a router so is that complicating things? I'm going to drop the AT&T soon but I'd like to have this figured out first.
What do I need to do?
I have absolutely no idea.....
THANK YOU!

A local only connection means you are connected to the device, but the device is not letting you onto the internet. I'd bet that you have a bogus IP Address and your hotspot has not fully authenticated you to use its internet.
Make sure you are disconnected from all networks, reboot the computer and hotspot, then try connecting again. Make sure you are entering the correct credentials to connect to the hotspot.
Chances are good that the wireless adapter that you are using is the problem here. If you were going to contact a support number I would start with them. There might be another way to configure it to play nicely with the Hotspot. Report back to us if you need more help configuring the hotspot. We will need to know the specific model number so that we can provide you with specific steps.

Connecting to desktop computer without airport?

Hi
I have a macbook and an imac g5, but the g5 does not currently have airport on it (although the macbook does). Is there a sensible way to connect my macbook to the desktop and how do I share files/ software etc?

When you attach the firewire cable you must first shut down the computer you want to access (with the cable attached) and hold down the "t" key while its booting, this will put the computer in "Disk Mode" (there should be a firewire symbol "dancing" around on a blue screen. Now, on your other computer, another hard drive will show up on the desktop, that is the one you want to access. You go inside this Hard drive just like your own, except you drag out the files you want.
If you are going to use a base station you could hardwire your G5 to it and wirelessly access it through your macbook, thought this would be significantly slower than connecting it through firewire. In this case, you would have to first go into system preferences, go to "sharing" and click start on both computers. Then go into "Macintosh HD", go to network at the top of the side bar, go into servers, and select the computer you want to access. It will ask you for a User name and password, the username is the name that shows up in your home folder. Assuming you are going to transfer data from the G5 to the macbook, you would want to go through this process on the G5 and drag the files you want into a folder on the macbook you have privilidges to access.
I am not completly certain what your intentions are, but if you want to quickly transfer data over, this is the way to do it (firewire is also much more simple to set up).
Note that when you are transfering applications over, just dragging over the icon in the Applications folder may not transfer all the data necessary for the application to run properly (such as Microsoft Office).

Xfinitywifi hotspot - limited connection with desktop computer, no login page

Lately I've ebeen trying to connect to a public xfinitywifi hotspot with a Windows 8 computer. It takes a good few seconds to connect, and I ALWAYS end up with a limited connection. It doesn't make a login page appear like it should, either. I'm sure that it's not because I'm too far away because I can place an iPod or my phone on top of my computer and they'll get a perfect connection and have the login page pop up. But this just doesn't happen with my desktop. I get a limited connection and can't do anything, not even log in. What could be causing this, and how do I fix it? Thanks.

wow. nobody has any ideas on this?

Connect to desktop computer ADSL by N8?

Hi/ with N8/Symbian Anna 24
Is there any way to conncet internet by Computer ADSL on N8by usb connecion)
sth like "nokia pc internet access" but for mobile not pc!
my Adsl modem isn't a wireless mdem but support usb/

Thanks very much for the response. I used the Airport Utility to do port mapping of port 548 to the IP address assigned to my computer on the home network, but outsiders still cannot connect using the IP address of my cable modem. There is no response when they try. Further suggestions welcome.

Community - My iMac keeps dropping and instantly resetting my wifi connection

Hey folks - I know a lot of people have been complaining about desktop issues and wifi connectivity, but this seems to be quite the variant from other folks' problems...
Every 2-20 minutes, my iMac is dropping, then instantly resetting my wifi connection. The actual wifi drop lasts no longer than 5 seconds, and instantly reconnects itself with no input from me... the problem is it completely interrupts any downloading, streaming, gaming, or anything else I might be doing that requires a constant internet connection. It seems to drop off just long enough to stop the connection, then it resets all on it's own.
I'm currently using a mid-2011 27 inch iMac intel core i5 3.1 ghz processor w/ OS X Lion 10.7.3. I have a Linksys router and a GCI issued modem, unsure of the brand as there are minimal markings on it. The internet/tv service (run by GCI) is smooth throughout the rest of my home, and no other items we own connected to the net seem to have the same problem...
I have tried soft resets on both the modem and router. I have restarted my machine several times and re-added the network location and wifi connection to my computer. I have unplugged both modem and router to let those reset and have unplugged and reconnected my coax cable for several minutes as well. No time of day seems to work well, and it's becoming quite difficult to work and do other fun functions like stream television or game.
Any help here would be super appreciated, and I need to warn folks right away that I am NOT very tech savvy, so any kind of messing with DNS or other what I would call 'advanced' settings may be tough :O Thanks and cheers!
-Monty

Hi Monty, I know you're not tech savvy but if you can get an 802.11n router your iMac would be able to take advantage of the less crowded 5 GHz spectrum. The Linksys ought to have some markings on it which you could look up to determine if it is 802.11n capable or not.
The symptoms you describe are consistent with wireless interference. The ability to use 802.11n in lieu of the older 802.11g your Linksys router is probably using is one way to mitigate its effects.
The Apple AirPort Extreme base station and the Time Capsule can both create two simultaneous wireless networks: a fast 5 GHz one for your iMac, and a 2.4 GHz one for other devices.
I do not know why your iMac drops off and on but that may be one consideration.

Cannot connect to wifi on desktop computer w/ Windows Vista

So as stated above, I cannot connect to the Airport Extreme wifi with my Sony Vaio desktop computer. My iMac, iPhone, PS Vita, and all other device can connect to it easily, but when trying to connect to the internet using my Sony Vaio desktop, I cannot. At first it showed up on the list of available connections, but then after calling TWC, they did something and it let it connect to the internet "with limited access". But after my father tinkered with it to try and give the computer full access, it cannot connect again.
In short: My Sony Vaio desktop computer running Windows Vista cannot connect to my Airport Extreme. So could anyone please help?

Did you try plugging in by ethernet?? Just to be sure there wasn't some fundamental issue.
If it works by ethernet and not wireless, then this is not at all unusual. Vista has the worst wireless drivers ever developed along with the worst wireless management.. an upgrade to XP or Win7 is strongly encouraged. .either direction is an upgrade.
Make sure the AE has all SMB compatible names..
Short, no spaces and pure alphanumeric. Do not use apple names with spaces and apostrophe.
Use wpa2 Personal security with a password of 10-20 characters again pure alphanumeric.
Use fixed wireless channels, try 1, 6, 11 in turn.
No improvement download the latest intel drivers (or whatever wireless card your laptop uses) direct from Intel. If that doesn't work try some earlier releases.. not always the latest is bestest.

Photosmart 5580 will no longer print from my wifes laptop, only from the desktop computer

Hello,
We have an HP computer with a photosmart 5580. We also have a lynksis wireless network set up for the home for all of the kids laptops. My wife and kids used to have the capability to print documents from their laptops. I am not sure if it was going through the wireless network or the bluetooth technology on the laptops. Recently we have run into the problem that they are no longer able to print from their laptops and even from the desktop we have not been able to print. I have had to reinstall the printer onto the desktop 2 times to make the printer work. But then a week or 2 later the computer stops recognizing the printer and I will have to reinstall it. The desktop is only 2 years old but it is barely used since everyone has a laptop. Also a friend of ours says that by doing a disk defrag on the computer that it messes up anything that we have connected to the computer. I strongly disagree with that statement and like I told my wife, if that were the case then the printer would have stopped working last year, but she takes this friends advice seriously and told me to stop the defrags completely.
I am thinking that it may be something in the registry that is causing this problem. Am I headed in the right direction or does anyone else have a different idea to correct this problem?
Thanks

Well, I think the problem is that the printer is getting a different IP address from the router periodically and the printer software cannot keep track of the printer.
The best way to fix this is to reserve an IP address for the printer so that it has the same IP address all the time. Do you need help doing this?
Unless I am missing something, this system is not using Bluetooth, but the Linksys 802.11 wireless system and defragging your hard drive has nothing to do with it (and is generally a waste of time, anyway).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My Mac desktop has intermittent Wifi connectivity

I've had a problem with wifi connectivity for over a year now, and have had the desktop repaired once already, with no improvement. Upgrade to Mavericks has made no difference.
The computer always thinks that I have a connection to my network. In system preferences it says 'connected' but I don't actually have a connection to the internet, for example. Streaming to the Apple TV stops, or the website stops loading.
However when I go to Network Preferences and click 'assist me' then I don't have all 6 lights in green, but maybe 2-3 green and the rest yellow. I go through the reconnection, get 6 green lights, and all is back to normal.
I have many, many other things connected to this wifi network (1 desktop, 2 laptops, 2 phones, 2 ipads, 1 apple TV, one speaker) and everything else has no problems, so it is clearly not the network.
Any tips, short of throwing the desktop away and buying a new one? My nearest Apple Store is in Paris (I live in Brussels) so no Genius bar for me. Plus no car.

Thanks, but as it's an intermittent problem, and only my desktop is having it - everything else doesn't disconnect, it's more likely a problem with the computer than the network itself. Everything is up to date.
However this morning I noted that the Time Capsule thought it was in the UK (which doesn't cause a problem to anyone else, but I fixed it) and I also switched on the 5GHZ network option and connected to that.
Wireless Diagnostics is monitoring my wifi connection. I wonder if anyone knows how to interpret the logs it produces when/if my connection fails?

When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

Question
When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, Joe

The Cannot Setup Sync message indicates that you don't have internet access. Check that you can get your phone online (3g or wifi) and then try to connect again.

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

Windows 7 desktop drops WIFI connection

Hi -
I seem to see a lot of posts with this same problem, but no solution that's relevant to me. I have a DLink DIR 655 router that has the latest firmware installed (I updated it yesterday). One of the machines on my wireless network is having problems.
Two Microsoft Surfaces, three Windows phones, and one Canon WIFI printer all work fine, its only a desktop that uses a USB Wireless card that has the problem. I am currently using a Medialink MWNUSB150N wireless card. Note, however, that I had
exactly the same problems with a DLink wireless card.
The problem is that the WIFI connection drops frequently. The systray will indicate that I am connected to the wireless network with internet access. Then I will notice that web pages are not loading, but it will still show that I am connected
to the WIFI network and the internet. After a short time, the systray will show that I am connected to the network, but have no internet access. After some more time it will show that I am not connected, but will usually show that connections
are available. When I try to reconnect (my SSID shows as available at this point), then I get an error saying no network is available. At this point, my SSID no longer shows as available. I've run the troubleshooter probably 100 times over
the course of several months. It never helps. Rebooting sometimes helps. Sometimes it seems like I need to do a voo doo dance to get the connection back. Following is the result of running netsh wlan show driver.
Any ideas?
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Dennis>netsh wlan show driver
Interface name: Wireless Network Connection
    Driver                    : 802.11 USB Wireless LAN Card
    Vendor                    : Ralink Technology, Corp.
    Provider                  : Microsoft
    Date                      : 2/26/2009
    Version                   : 3.0.0.61
    INF file                  : C:\Windows\INF\netr28ux.inf
    Files                     : 2 total
                                C:\Windows\system32\DRIVERS\netr28ux.sys
                                C:\Windows\system32\drivers\vwifibus.sys
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11b 802.11g 802.11n
    FIPS 140-2 mode supported : Yes
    Hosted network supported : Yes
    Authentication and cipher supported in infrastructure mode:
                                Open
None
                                Open
WEP-40bit
                                Open
WEP-104bit
                                Open
WEP
                                Shared          WEP-40bit
                                Shared          WEP-104bit
                                Shared          WEP
                                WPA-Enterprise TKIP
                                WPA-Enterprise CCMP
                                WPA-Personal    TKIP
                                WPA-Personal    CCMP
                                WPA2-Enterprise TKIP
                                WPA2-Enterprise CCMP
                                WPA2-Personal   TKIP
                                WPA2-Personal   CCMP
    Authentication and cipher supported in ad-hoc mode:
                                Open
None
                                Open
WEP-40bit
                                Open
WEP-104bit
                                Open
WEP
                                WPA2-Personal   CCMP

Thanks Cody!
Questions:
Regarding your advice to check the wireless security settings - I don't know exactly what to do. I went into the router admin page and checked the wireless security - its set to "WPA-Personal". Other than that, I don't know how to tell if
its using TKIP or not.
The next time it fails, I will try your suggestion to remove the network and reconnect. I can't remember if I tried that at some point, so I'll give it a shot. I'm waiting for it to fail right now as I tried something yesterday that I think has
a low chance of success, and it hasn't failed yet. I noticed that the option to "allow Windows to turn off this device to save power" was checked for the wireless adapter, so I unchecked that value. I only think it has a low chance of
success, since the timing of the shutdowns was pretty random and did not "smell" like a power saving thing, but thus far it hasn't failed. I'm still within the window of randomness, though. Sometimes it works for a little over a day and
sometimes it fails after less than 5 minutes, so I'm just keeping my fingers crossed for the moment.
Comments:
Tried using different USB ports, USB 2.0 and USB 3.0, and front panel vs. real panel just in case there was anything weird going on. No difference.
Updated the driver using the "update driver" button. Windows believes I have the best driver installed. I did look for other versions, didn't find anything.
Dennis

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

N78 WIFI CONNECTION TO DESKTOP COMPUTER

Similar Messages

Maybe you are looking for