N8-00 WLAN/HomeHub Connectivity problem
Hi everyone,
This will be my first post on this forum and the problem with which I came here is as following:
I got a brand new N8-00 phone from Orange and I really enjoy this phone so far, but what bothers me is , when I use my phone at home to browse internet, check my email or whatsoever - after few minutes my laptop doesn't get any connection with internet same as my phone and only after a hard reset on my homehub router I get my internet back, it all works very well as long as I don't use my phone, when I go online on my phone it all happens again.
Please help,
as I really want to keep this phone, but it makes me a little bit worried that I can't use my Wi-Fi at home in order to keep my phone fully loaded with apps and all the good things you get with internet.
Thank you
Ex-user of E71
Proud user of N8-00
sijjy wrote:
Hi I too am having this problem. Could you tell me how to change the settings on my homehub please.
Thank you
You might need to refer to your BT Homehub 2.0 router's user manual or some other support documentation in order to get started, if you are not already familiar with configuring your router's settings. Look for either printed or PDF user manual came with your router or go to BT support web pages and download the PDF manual (link).
Use a PC that is connected to the Homehub via LAN and log in to router's management web pages using a web browser on the PC. Based on the user manual it seems that you might be able to connect to your router's management interface by entering the url: http://bthomehub.home in to your web browser. If this doesn't work opening the management web pages by using the default IP address of the BT Homehub 2.0: http://192.168.1.254
Refer to the sticker behind the Homehub 2.0 (and/or user manual) in order to find the "admin password" that allows you to change settings of the router after you have connected to the router's management web pages.
On the Homehub 2.0 management web page (connect via PC's web browser ):
Go to "Settings" and enter your router's admin password.
Go to "Advanced Settings" and again select "Continue to Advanced Settings" to confirm.
Select "Wireless" and "Configuration"
You should now be at the page that shows advanced wireless settings of the Homehub 2.0 including channel SSID, channel selection, wireless interface mode etc.
In order to disable 802.11n mode and use the router in 802.11b/g mode do following:
Go to "Wireless interface type" and select "802.11b/g" mode instead of default "802.11b/g/n" mode and press "Apply".
After router management page shows that "Apply" was successfull you might still want to restart (power off / power on) your router to make sure that new settings were really taken in to use.
Hope this helps. Please note that the instructions above are based on the BT Homehub 2.0 related documentation floating around internet and instructions might not be absolutely spot on but should hopefully give you some idea how to change BT Homehub 2.0 wireless mode from 802.11b/g/n to 802.11b/g.
Similar Messages
-
Nokia n8 wlan wifi connectivity problems
I purchased Nokia N8 about 2 months ago. Lovely phone, camera etc. However I am having serious issues with wlan/wifi. I have set up my phone to connect only to wifi or wlan. I believe I have all the settings correct. But when I try to connect to the web I keep getting the message that connection charges will be incurred etc and when I click on it goes online using my phone internet ie O2 wap service or my O2 internet service. Therefore I am being charged even though I have connected to wifi. I have tried everything but this is getting really annoying. I am abroad at the momen and my hotel has free wifi etc. Even when I have gone into my O2 store I might aswell be talking to the wall. No good. I should have purchased an Apple I4. Can someone please help me.
Solved!
Go to Solution.For all people experiencing problems with N8 (and some C series phones) and WLAN connections : Is your router a Linksys, Alcatel, Thompson or Speedtouch?
I had a Speedtouch 585 router v7 and couldn't connect to my home WiFi, but could connect at my friends' Wi-Fi's. I tried renaming the SSID with no blanks, manually setting the IP's and DNS, but the problem persisted. And the problem was the router. Since the firmware upgrade, the QoS (Quality of service) parameter cannot be tampered with. You have to turn it off manually. To do so, do this :
1) Open a command line window (start-->accessories-->command line OR start-->run--> type "cmd")
2) type telnet 192.168.1.254 and press enter (this was the router's IP address in my case, it may be 192.168.1.0 or 192.168.0.1) (If it doesn't connect right-click the connection icon at the bottom of the screen-->properties-->TCP/IP and note the IP address)
3)enter your username and press enter (default admin)
4)enter your password and press enter (default <blank>)
5)the router command line logo should appear. Type wireless and press enter
6)type qos and press enter
7)type config mode disabled and press enter
8)type saveall and press enter
9)type exit and press enter
Find your WiFi in your N8 as usual (delete any previous access points of your WiFi if any) and set it as first in priority (in N8 : settings-->connectivity-->settings-->network destinations-->internet)
You are ready !
Thanks to the original writer here : http://morgis.net/Nokia%20ugyldig%20server%20navn.htm -
N95 WLAN Connection problems - Orange Livebox (UK)
I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?
hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers, -
2504 controller + 2602 APs = wireless clients connectivity problems
Hello, everybody!
I have a connectivity problems of wireless clients. The symptoms are:
1) Some clients receive 169.254.x.x., instead a correct DHCP addresses, less in a minute connection drops, and in controller's "Monitor" > "Clients" tab these clients are marked as "Excluded".
2) Most of the clients receive the correct addresses from DHCP (192.168.2.x), but also loose connection soon.
3) Wireless clients with correct addresses can't ping each other, gateway and an address of the controller's dynamic interface (all of them are in same subnet).
4) And the most suspicious problem is that some machines are unable to connect to APs after several attemps to do that. I mean, I configure controller and change some options, trying to understand, whether they were applied or not and constantly connect and disconnet certain PC to the SSID. After five or ten attempts I can't connect to the SSID. During these attempts, the others PCs stay connected, without interruptions, and they could be reconnected again. It's like some kind of port security works, but I'm not sure...
Do you have any ideas which options should I configure?
My configuration:
I have three interfaces on the controller: virtual, management (default) and dynamic (it is set to the WLAN)
I have one SSID, WPA/WPA2, AES/TKIP, authentication PSK.
My clients are a/b/g/n, all are permitted on the controller. No custom security policies were applied.
All the devices are in a single room: controller, one AP and different clients: desktop, notebooks, iPad, Nokia Lumia, etc.
I have an internal DHCP Server on the controller and it works perfectly well.
I can provide all the screenshots required from web-interface of the controller...
Many thanks in advance for all ideas that you have about these problems...Hi, there!
The problem was solved.
1) APIPA address receives only single machine with Win8 - I think there are some firewall issues
2) Other devices have been loosing connection because they were mobile devices, like iPad and Lumia. If you keep working with it, it doesn't drop the connection
3) The dynamic interface address and gateway address were inaccessible because i had not used an appropriate port on the controller. =)))) Firstly, it was just a guess, but it proved.
Now, everything works with WPA2, AES, PSK...
It is a very good day!)
The only question remains: why I can't connect machines, which have a static IP? During the controller initialization, I said "yes" for permitting static IPs...
Guys, many thanks for your help! -
Qosmio X770-13G - Slow WLan internet connection
Dear all,
I just bought a Qosmio X770-13G with Windows 7.
WIFI data transfer is very slow, even when using a high speed AP (tried it on more than one location) and after disabling the anti-virus program.
Using the Config Free program shows 6Mbps second download speed but even downloading a 4 Mb PDF file takes several minutes.
Updating the BIOS software and the WLAN driver did not help.
Does anybody have the same experience?
Thanks in advance,
JohnYes, it does. And a new development yesterday evening shed new light on this problem: In addition to using a couple of known AP's I tried connecting to new AP's. Result: a data transfer speed as expected. So it seems I dont have to look into faulty hardware but into connection problems with certain AP's. I guess my original problem (suspicion of faulty hardware) is no longer an issue. Thanks for the reply.
John -
Connection problem with Nokia Lumia 2520 tablet
I found the problem when connecting Nokia Lumia 2520 Tablet to Linksys EA4500 router WiFi network "Wireless-N" mode. TheInternet and local network connection disappears after a few minutes, the ping test fails. In "Wireless-A" mode (5 GHz) and "Wireless-G" mode (2,4 GHz) connection is normal, but i need more speed!
When i have connect this tablet to the other routers in mode Wireless-N connectivity problems do not occur.
Reset the router and the tablet to the factory defaults does not help.
Router firmware version - 2.1.39.145204
Nokia Lumia 2520 have Qualcomm Atheros AR6x04 WLAN AdapterDisable 5ghz wireless and use only wireless N.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
Hi,
I seem to be getting an error sometimes when trying to connect via WLAN: -
Max connections exceeded...please try again. (something very similar)
What's all this about? There's plenty of connections available on my WLAN router and I'm only using one browser connection on the phone, so why should this happen?
Regards
Jules.23-Jun-200608:36 AM
jdub wrote:
Hi,
I seem to be getting an error sometimes when trying to connect via WLAN: -
Max connections exceeded...please try again. (something very similar)
What's all this about? There's plenty of connections available on my WLAN router and I'm only using one browser connection on the phone, so why should this happen?
Regards
Jules.
I am experiencing the same problem on my N80 as described in the original post. I should also re-state that I only get the "Max. number of connections..." message when trying to connect to my wireless network. Other connection methods work just fine.
I might add this problem only started after and upgrading my firmware to the internet edition. I had connected fine for more than one half a year previous. No ther changes have been made. Any input is welcome.
Thanks! -
Connection problems, computer Locked
hello
I'm having a lot of trouble connecting with iCloud, Apple id, idAdobe, etc. . . . I can not go into Apple Store and I do not work Safari
If I enter www.icloud.com, I can see my devices and the MacBook Pro appears as "locked"
Can someone help me out?
Thank you so much
MacBook Pro - Yosemite 10.10.3
MacMini - Yosemite 10.10.3As far as I know Wireless USB is not offered by Toshiba so if you have connection problems either contact wireless USB manufacturer or your internet provider.
Check also all WLAN settings on your notebook and router (if you have one). I am pretty sure your described issue is related to some wrong WLAN settings. -
N95 8BG "WiFi Connection problems" and "Web: no ga...
Like many users, I could not get my new Nokia (N95 8GB) to work with my WiFi. After many attempts, using the various ideas posted, I came up with a solution that works reliably for me.
First lets deal with "WiFi Connection problems"
Menu/Tools/Settings/Connection/Wireless LAN
'Show WLAN availability' = 'Yes'
'Scan for networks' = 'Every 5 minutes'
Some users have suggested choosing 'Advanced Settings' from the 'Options' menu, changing 'Automatic configuration' to 'Disabled' and the either setting 'RTS threshold' to '2346', or setting 'Power saving' to 'Disabled'. I tried both of these but they did not make any difference in my case. However they may make a difference for you, hence their inclusion here.
Menu/Tools/Settings/Connection/Access Points
Choose 'New access point' from the 'Options' menu
'Data bearer' = 'Wireless LAN'
'WLAN network name' = If your network is set to broadcast its SSID, use 'Search for networks' then select your network from the list, otherwise use 'Enter manually' and type in the SSID.
'Connection name' = anything you like, but I use the SSID
'Network status' = not sure about this maybe someone can confirm, but I think if the SSID is broadcast then it is 'public', otherwise it is 'private'.
'WLAN network mode' = match this to your access point configuration. Mine is set to 'Infrastructure', so I do not cover the ad-hoc scenario here.
'WLAN security mode' = again I am using WEP so have not covered other scenarios.
'WLAN security settings' = these should match you access point configuration.
'Homepage' = whatever you like. I use 'http://www.google.co.uk', just so that when I start browsing I get something reliable, useful, and dependable. If Google fails to appear it usually means there is something wrong with your config.
Now lets handle the dreaded "Web: no gateway reply"
Menu/Tools/Settings/Connection/Access Points
Scroll down to highlight the new access point and choose 'Edit' from the 'Options' menu. Now choose 'Advanced settings' from the 'Options' menu.
Assuming you network used IPv4, which most do in my experience, select 'IPv4 settings'. I don't know about IPv6, and don't use a proxy so these are not covered.
The values you enter in 'IPv4 settings', depend upon your network/router settings, and whether you have a DHCP server or not.
Assume your a router IP Address, on the LAN side, is 192.168.0.1, and that it has a DHCP server set to serve addresses in the range 192.168.0.64 to 192.168.0.192, using subnet 255,255,255,0. Since the mobile does not seem able to get an IP Address from the DHCP server we give it a static address 192.168.0.55. Notice this is outside the range sereved by te DHCP server to avoid conflicts.
We end up with:
'Phone IP address = '192.168.0.55'
'Subnet mask' = '255,255,255,0'
'Default gateway' = '192.168.0.1'
'DNS address' = 'user defined'
'Primary DNS address' = '192.168.0.1'
'Secondary DNS address' = '0.0.0.0'
I used something similar and was at last able to browse the web via wifi.
I hope all of the above helps someone out there.I have just experienced this problem having been using the WiFi network for months without problems. I tries all the suggestions on these forums including the power settings, turning off WEP, and the fixed IP suggestion and none worked. I even reinstalled the firmware and reconfigured everything. It turned out to be the router. I had rebooted it several times to no effect but the DHCP always gave the N95 the same IP address lease. So I changed the range of IP addresses the DHCP could lease and restarted the N95. It got a new IP and was back working again.
If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it.
-- W.C. Fields -
WLC 2504 Connectivity Problems
This is a tricky one.
I installed a 2504 WLC with three AP's. Two SSID’s were configured, one with WPA2/AES-TIKIP and the other with Web Auth.
After installation, customers could connect to WLAN without problem and .
The problem that is occurring is that since the beginning of week, customers PDA's, cell phones and iPad and cannot access Internet with any of the two WLAN but clients who used laptop have no connection problems. Also the DHCP Server is assigning IP's correctly.
This problem also occurs with test SSID I created which is Open Auth. I see associated Cell phones and IPAD to the WLC but none of these answers ping from the WLC.
This is a WLC 2504 with IOS 7.4.100.Hello everyone!
Today I did a test with my Cell phone Samsung Note 2 and I have the same conectivity problem.
I have installed the APK ipconfig from the Play Store for Android in my cell phone and y see that I getting IP Address, Mask and Gateway.
This is what I´ve got from the APK:
IP ADDRESS 192.168.8.181
MASK: 255.255.255.0
GATEWAY: 192.168.8.2
DHCP SERVER: 192.168.8.16
DNS1: 192.168.6.16
DNS2: 192.168.2.16
I have connected my laptop to the WLAN with no issue and I´m getting this:
The IP address of the DHCP Server is 192.168.8.16 and 192.168.6.16 and is a Microsoft Server.
I´ve created a test WLAN with OPEN AUTH but the problem remains.
Here is the OUTPUT you requested:
show wlan 1
WLAN Identifier.................................. 1
Profile Name..................................... APS-PT-01
Network Name (SSID).............................. APS-PT-01
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 16
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show w?
wgb wlan wps
(Cisco Controller) >show wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... APS-Visitas-PT
Network Name (SSID).............................. APS-Visitas-PT
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 1
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled
IPv4 ACL........................................ Unconfigured
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Disabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
(Cisco Controller) >
(Cisco Controller) >show wlan 3
WLAN Identifier.................................. 3
Profile Name..................................... Prueba
Network Name (SSID).............................. Prueba
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... APS-Admin-WLC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Enabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Enabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Disabled
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Disabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
RG54G2 Wireless Router Internet Connection Problem
Hi,
(apologies for the long message - trying to cover all details - summary: wireless router often drops internet connection)
I recently bought an RG54G2 Wireless Router, a CB54G2 PCMCIA Wireless card and a D-Link GWL-630 PCMCIA Wireless card. In addition to two laptops connected to the wireless router WLAN, I have two PCs (one Win WP Pro SP 1 and one Win98SE) connected to the router via wired LAN. I also have a SurfBoard SB3100 Cable Modem connected to the WAN port (this connects to my ISP - Optusnet (Australia) via DHCP).
The problem I have is that the internet connection is disconnected many times a day (often every few minutes, sometimes an hour or so). I am able to reconnect by resetting the wireless router via the wireless router configuration page. When the internet is disconnected I am still able to access the computers on the LAN/WLAN (via Windows Explorer and Ping), I am also able to ping the router and the Cable Modem, but nothing outside of the cable modem.
Also, when the internet is disconnected the System Status page indicates that the router is still connected to the internet, and the Diagnostics page passes the Test Connection test, though no external pings work.
I did not have this problem when the cable modem was connected directly to the Win98SE PC (and other PCs via ICS).
I have disabled the WLAN and the problem still exists with only the wired LAN.
I have changed numerous settings in the wireless router config page with no success (eg disabling DHCP and setting each IP address, minimising LAN and WLAN speeds to 10 and 11MBps plus others).
I have upgraded the wireless router firmware to R1.0.6.0 (no change to the problem).
Searching on Google I have found several other cases of routers with unstable internet connections (none refering to the MSI routers), but none had solutions that helped my situation (most replies suggested updating the firmware).
Any suggestions of how to make the router internet connection stable?
Thanks,
Mikemaybe this is the FIX 4 wireles router internet connection problem
please let me know if any one fix the problem with this tips
thankz
M. B. Feb 6 2004, 8:20 am hide options
Newsgroups: comp.os.ms-windows.networking.windows
From: "M. B." - Find messages by this author
Date: Fri, 06 Feb 2004 16:20:48 GMT
Local: Fri, Feb 6 2004 8:20 am
Subject: SOLUTION to my router loosing connection to Windows XP
Reply | Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse
I am happy to report that after 8 days of constant battles, reboots, phone
calls, cable pulling, router changing, it seems that I finally have found a
combination that has had me using Verizon DSL account for over 12 hours so
far without any kind of interruptions.
Since so many of you tried giving me comments and suggestions, I felt that
it is necessary for me to post this here so that the next person will not
(hopefully) need to go through this hell as I did!
My original problem was that when after I purchased a D-Link Wireless Router
DI-624, I would get disconnected from Verizon DSL at least once every 2
hours or so. My internet access would "freeze" and then a little popup box
at the bottom right system tray would tell me that the "LAN cable has been
unplugged". After about a minute or so, my internet connection would be
back working This was NEVER happening during the 2+ years I was using my
Westell modem alone (running in router mode).
Please keep in mind: The problem I was having was not wireless related as
it was happening to the desktop computer to which the router/westell was
connected to!
During these last 8 days, I tried: one DI-624 wireless router, two Netgear
614v3 routers and two Linksys WRT54G v.2 routers. In addition, I received a
brand new Westell 2200 modem from Verizon. I also tried about four
different CAT-5 cables. Here is the final outcome:
I have the Linksys WRT54G (version 2) wireless router connected to the
Netgear Fast Ethernet FA310TX network card in Auto-Sense mode (using the
built-in XP drivers, as Netgear told me that there was never a newer
revision released). I have DISABLED the built-in 3Com Gigabit LOM (3C940)
network card (via the ASUS P4C800 Deluxe motherboard BIOS), DISABLED the
Zero Wireless Configuration service, and have put in the IP/Gateway/DNS
address numbers inside my Windows XP Network Connections | LAN setup. My
operating system is Windows XP Pro SP1 and the modem is a Westell 2200
configured as bridge only.
If my situation continues to be stable, I *might* try to go back to the 3Com
built-in card (disable any power management) and then re-enabling the Zero
Wireless Configuration services. But in reality, I am happy with the way
things are and have already spent enough time trying to get my router to
work with Verizon DSL without having it drop connections!
Now, the next step will be setting up the WIRELESS part of this. I don't
even yet have a laptop with me on the premises, but the 802.11g card that I
already have is the D-Link DWL-G650. I hope and assume that this will work
okay with the Linksys...
One thing I must say is that I never realized that how many problems other
users are having. I would have thought that since 802.11x has been around
in the mainstream by now 2+ years, that things would have been much more
"system friendlier". And again, my issues were not even WIRELESS related.
All 3 tech supports were not really helpful, as none of them realized that
the problem is somehow between the router and Windows XP (Ethernet card?)
loosing a connection, which of course results in Verizon DSL loosing the
connection also.
One other comment about the Netgear 614 v.3 router: A number of people have
responded to tell me that they have had this random "router resetting"
happen to them (where the routers behaves as if someone turned the power off
and then back on, and the lights flash) just as if you first turn it on). I
was lucky to witness it myself during one of the "disconnects" that I had.
This was actually the reason why I went back to try the Linksys one more
time. So, I would definitely recommend staying way from this 614 (version
3) model.
Once again - THANK YOU everyone! -
Timeouts and connection problems after 5.1(2) upgrade
AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?I don't know specifically, but I did notice that 5.1(3) was released today.
-
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
RFC Receiver adpater Connection problem , Help us to solve ?
Hi Friends ,
Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given <b>Maximium connection property to 1</b> .
While multiple set data passed to rfc will connection problem will come ?
Most data not uploaded . I am getting the following error.
<b> If i set max connection to 5 . It is 5 times or more than that it is pusing the data .</b>
i am getting the following error <b>while i set the Max connection to 1 .</b> . <b>Any other place i need to change configuration ?</b>
<i><b> - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.</b></i>
Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan<b></b>
Message was edited by:
ranga rajanHi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar -
Unending connectivity problems -- and Desktop Help...
I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well.
BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
4) Connection dies. So much for Microsoft Fix It.
5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
Summary: I seem to be being simultaneously hit with one issue after another.
I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
Above all though: I'm really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
Thanks.Thanks again to John and gg30340. Here's an update:
1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
4) Hub reset to factory fresh, according to BT guide.
5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .
Maybe you are looking for
-
Why is there an error message when I try to update to ios 5.1 on my iPod touch?
When I click "Install Now" it says "Verifying" then an error message pops up saying that there was an error updating and it dosent give me much more information.
-
Dear All When i save the PM order change in IW32 , its going for dump in the following line. Include name : LCOIHF2V Short text Length error occurred in IMPORT statement. is the error i am getting. 195 IMPORT BANF_HHM FROM MEMORY ID '
-
IDOC-File - records in Idoc to file based on some condition
Hello experts, I have a idoc to file scenario. the incoming Idoc can have multiple records in it and i have to map these records to a csv file. Now the problem is not all records has to be mapped to the file. Based on the value of a perticular file (
-
How to use MAX function in SSAS MDX Query
I want to run this Query with MAX Condition on LAST_DATA_UPDATE Column .
-
IMovie 9.0.4 broken after OSX Lion update
Warns of "Missing Quicktime Components", but reinstalling iMovie from bundled software discs (after first deleting) does not fix issue. Any ideas on how to fix?