N82 USB problem with win7

I have a problem when ejecting my phone. I use windows 7 ultimate 64bit. When i try to eject it, it says that you can remove your hardware safely but when i remove my device the device says some data might be lost.
When i was using XP it didn't have the problem. Is it something that i have missed?
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?
Solved!
Go to Solution.

Ok thanks a lot for your reply! For some moment i thought that no one here have any solution!
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

Similar Messages

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

USB problem with K7T266-Pro

I have an USB problem with Logitech Cordless Wingman Gamepad. I have dowloaded the newest version of logitech gamepad, and the VIA drivers for motherboard K7T266-pro. I also tried to install the USB filter rc1, but the problem remains.
Here is how the problem occur:
1. On start up, the gamepad is detected and ready to use.
2. While I am playing a game, the usb device is reconnecting a lot. I turned of the "Allow this device to turn off to save power" in device manager under all USB root hub. But the problem remains.
3. After a while, when I have been playing for a while, the gamepad turns off, and the usb device is not recognized error message appears. Under device manager I now have a Unknown Device under USB.
4. To get it function again I have to restart the computer.
Anybody who knows the answer for this ?

I have a similar problem but with my Logitech optical mouse. It's also using the usb port and it keeps disconnecting and reconnecting the device in Win XP. I use to have Win2000 and I experienced the problem but not as often as now. Also in Win2000 there wasn't an annoying sound when a device would connect and reconnect, and not to mention when your playing a game and the mouse quits for 1/2 a second, really annoying! Sometimes it will quit completely and I have to either physically reconnect it or reboot to get it working again.
I have recently tried fixing the problem:
a) I flashed my old Bios and put in ver 1.9 from this site
b) I've updated the Via 4in1 drivers
c) I've updated the mouse drivers that come from Logitech.
None of these updates helped. I've taken my mouse to work to see if it does the same thing, but so far so good. My pc at work is running Win2000 but different MB. I don't think there is anything wrong with the mouse. Although I haven't tried using the PS/2 adapter that came with it and see if it behaves the same way. I have a feeling the mouse will work fine, but kinda sucks cause I have usb and I have to revert back to PS/2 just so it works properly.
I've read on the Via Hardware forum some people having the same problem but with an Abit board. They changed something in their Bios to resolve it. If anyone has any ideas, maybe changing something in the Bios that has to do with the usb ports, I would greatly appreciate it.

Usb problem with VirtualBox 4.1.2.

Hello all
I have a usb problem with my VirtualBox 4.1.2.
I installed VirtualBox 4.1.2 with VirtualBox Extension Pack 4.1.2. on vista 64 bit host
but when I run Win 2003 guest I get the following :
Failed to access the USB subsystem.
Could not load the Host USB Proxy Service
(VERR_FILE_NOT_FOUND). The service might not be
installed on the host computer.Can any one help on how to resolve this ?

I too an facing the same problem.
if u have some solution then plz mail it to me.
regards
Dinesh Singh
Nucleus Software Exports Ltd
[email protected]

USB Problem with iMac

I have a USB problem with a 2007 iMac.
It appears that 1 of the usb ports is faulty, when in OS X 10.6.2 I constantly get "because a usb device is drawing too much power" popup. Usually 3-5 popup eventually.
I used Boot Camp to boot into Windows 7 and Device Manager can see the ICH8 Family USB Universal Host Controller - 2832 as a problem. I can disable it without an problems.
The question is: Is there any way to either disable that pop-up warning in Os X or disable that specific port so I don't get the pop-ups.
I performed all updates and things like PRAM reset and SMC reset.
Its not under Apple Care if your wondering.
Thanks,
Message was edited by: DrWickman

So does that mean all the ports work properly, even after getting that message?
If you start up from your Mac OS X installation disc (a different Mac OS X system), do you still get this error message? You can do so by inserting the disc and restarting with the C key held down. When you get to the Installer screen, you can do things like run Disk Utility from the Utilities menu. Does that message still appear?
Also, you said you reset PRAM and SMC, but make sure you followed these procedures
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/HT3964
Apple recently changed the procedure a bit. While going through it disconnect ALL cables. If you have been connecting the iMac to a crowded or old power strip, connect to directly to a wall outlet, at least during this test. Power it up initially with nothing connected, except the power cord. Note if that message appears. If it does not, connect just your keyboard/mouse, use it that way for a while, and note if that message appears. If all is well, connect the remaining peripheral devices.
I don't know of a way to disable that message without disabling all the USB ports.

USB problem with Satellite P100-219

I have problem with USB flash memory on my Toshiba. Al devices on USB are workig except usb memory and external hard disc. USB and hard are OK. When I connect them it says USB device not recognized. I have win 7 ultimate, but I've also try XP and it is not working not under XP or Win7.
Can it be BIOS related. Bios is Phoenix 4.80, last update from Toshiba support. Motherboard drivers are also updated. But in BIOS I don't see any USB fucntion?
Anybody have any idea? (all common metodhs like uninstalling drivers or similar are already done)
Thx in advance
Tom

1. No. I was istall new instalation of XP. Usb still not working. After that new instalation of 7.
2. Yes, all was working till BIOS update. Now works everything (mouse, printer...) except any mass storage device (hard and usb sticks)
3. Yes
4: Only when mass storage device (usb, hard) it show unknown device
5: I was told in first post that I allready try delete, reinstall and everything simillar
Thx

Stability problems with Win7 x64 and Boot Camp 3.1...

Before I was running win 7 with Boot Camp 3.0 and On top of that I installed my Chipset and Graphics from Nvidias Website. System was running without any major problems.
Now I have win7 and BootCamp 3.1 and the laptop runs like crap... System freezes sometimes only for a minute most of the time I need to hold power button.
The last time I has ScanDisk start on me and start checking. it found about 200 missing files some unindexed and MFT bitmap was repaired...
Do not know why, I'm unable to figure out what was causing that.
Currently I have win7 x86 with bootcamp 3.1 installed and The system works good.
I think there is an issue with the 3.1 x64 driver package.
If anyone has any Ideas on what I can do to figure out why the system runs so unpredictable with 3.1 x64 drivers installed. I'm whiling to experiment and reinstall win7 x64 as many times as needed so i can send an error report to apple to get this issue fixed.

Wow, i've been running windows 7 64 bit in boot camp since I got my copy as a beta tester in July and never had any issues like you're describing. Boot camp 3.0 worked fine (other than the light in the audio port and minimal touchpad control, and the still present inability to dim the screen dynamically based on brightness around me). And I've had no problems with boot camp 3.1 so far. In the previous BC versions, I went to the nvidia site and downloaded whatever the current driver was for the video, but nothing specific for the chipset. With 3.1 I haven't done even that, just using what the boot camp update installed. Have you tried it with just the BC 3.1 drivers, not getting anything extra from Nvidia or anyone, just to see what happens from that point first?
About the only time I had any issues with diskchecking is when I accidentally close fusion and it abends my windows session. I make a point then of booting and telling it to ignore the disk check, editing the registry to reset the flag so it doesn't do it, then just run a disk check from within windows telling it NOT to fix anything, so that it can verify it's clean. I found the normal disk check in the preboot environment is horrendous on the MBP, takes me literally hours to run through despite it never finding anything to fix.

Odd USB Problem With K7N2 Delta-L

Hey all. I have a bit of a weird problem here I'm wondering if people can give some insight on. I have a K7N2 Delta-L mainboard that I've been using for two years now without the slightest problem. However, recently I've started experiencing some odd USB related problems which culminated in a big moment of panic for me yesterday. I'll start with what happened yesterday.
My system drive is 2x40GB PIDE drives running on an add-in Promise FastTrak133 controller. Yesterday, I was given 2x160GB drives from a client that I decided to upgrade my RAID with. I installed the drives and fired up my system, but had to reboot several times as the drives weren't jumpered right and not detecting on the Promise board. After I finally got the drives working, I noticed my USB had completely died. My USB keyboard and mouse didn't work and my TrueImage rescue disk (which I was going to use to restore my backup to the new RAID with) couldn't see the USB hard disk which contained the backup. I panicked about this for a while, but eventually managed to restore the keyboard and USB drive by unplugging the system, pulling the battery, waiting 15 minutes, putting the battery back and starting up. My mouse still didn't work, but once I got into Windows, it started to work after unplugging it and replugging it three times. All these devices work immediately when plugged into my laptop so I know they are OK.
Also, for the last few months leading up to yesterday, I've been having a problem with some USB devices not detecting properly when I startup. For example, the mouse will not respond until I either replug it (sometimes more than once) or on some occasions, just mash the buttons a few times at which point it kicks in. I also find that sometimes if I switch the keyset on my Zboard (which resets its USB connection), sometimes it won't get recognized as attached to the system unless I disconnect it or reboot. Both of these devices work perfectly in other systems I've tried them on and once I get them running in Windows, they don't kick out again unless the system is shut down (and they only fail to work on some boots, not all.) Every other aspect of the system works flawlessly.
I was wondering, has anyone else seen this before and is it something I can correct? Is this a sign that possibly the board is starting to die and I should look at upgrading? If I install an add-in USB card and disable the on-board USB, will I still be able to boot from USB devices? I cannot really afford a major upgrade right now, but I also can't afford to lose this system so I'll make the investment if this is a potential sign the board is failing. Thanks for reading and any help you can provide.
P.S. Here is a list of USB devices connected to my system, all of which I've tried disconnecting without fixing the problem:
Razer Copperhead Gaming Mouse (Latest Drivers & Firmware)
Ideazon Zboard (Latest Drivers)
Artec e48U+ Scanner (Latest Drivers, Powered By USB)
iMex USB 2.0 External HDD Enclosure
HP Photosmart 7600 Photo Printer (Runs Through Zboard USB Hub)

the PSU looks fine and should be capable of providing more than enough power - unless it is faulty for some reason. is it clogged up with dust? do you have another one you can test with?
does your case have its own USB port(s), if so disconnect from motherboard and see if that makes any difference
also, try going to Device Manager, uninstalling all the Host Controllers listed under Universal Serial Bus controllers, and then rebooting to reinstall the drivers
i presume you have already referred to this sticky topic: If you are having problems with USB ports, read this topic.

USB problem with K7T266 pro2 RU

I have a MS intelli mouse optical. It connects via USB. About 10 times per hour the cursor freezes and the mouse shuts off. I have to unplug the mouse and plug it back in and it starts to work again. This gets very annoying. I am running a clean install of win xp pro. And have recently done a format. It happened before and after the reinstallation of XP. It does not matter if the mouse is plugged into the USB ports by the keyboard connector or the add in USB 2 card. It happens in both places.
Anyone else have this problem or anyone know a fix to it?
Thanks in advance
Mike

I am having the same problems with KT4 Ultra.

IMessage and USB problems with MacBook Pro (Maverick)?

Since I updated my MacBook Pro (2011) to Maverick I have had problems with imessage not working. I also can't use my USB ports for my printer, card reader or external disk. USB ports work together with my iPad and iPhone. Does anybody out there have an idea about what I can do to fix these things? Many thanks in advance.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

USB problem with K8N Platinum BIOS 1.C

I was running the beta BIOS 1.CA to fix a problem with one of my CPU cores not being detected on a warm boot and it worked great.
When I noticed the official release BIOS 1.C I upgraded but I noticed problems with my USB mouse and keyboard sticking occasionally, the keyboard sometimes needed two or three presses to type and I was losing mouse clicks, gone back to the beta 1.CA BIOS and everything is fine again.
Anyone else noticed this with 1.C BIOS?

Yes, I've gone back to the beta BIOS now and everything's fine
I only upgraded to the release version because usually releases are more stable than betas, obviously in this case the reverse is true

11g problem with Win7 starter

Taking a class and the book came with Oracle 11g DVD. Tried to load it onto my laptop and get an error when checking the operating system. The error is something like "expecting 5.0, 5.1, or 6.0 received 6.1" which I am assuming refers to Win7 vs vista/xp etc... Is there a way I can tell from the DVD 11g version # (afraid I don't have it in front of me now) which version of 11g came with the book and which version file(s) I should download from Oracle to run with Win7 starter?
Thanks in advance
Bill

Ok, I get that its certified for Pro and Ultimate (which I don't think I can run on my netbook I use for homework), but I think I veered the conversation away from my original point. The version of Oracle 11g which came with my textbook says it will run on win2k, winXP, and Vista but craps out when trying to load onto Win7. The version of Oracle (to best of my recollection, as I don't have the disc in front of me is 11.0.1.something).
I guess my big question is would this version load on Win7 pro or do I need a newer version of Oracle that will load onto Win7? If I do need a new version in order to load on Win7, how can I tell which flavor of Oracle I have on my DVD - the free version, the next one up with a student license???
Worst case scenario, I load it onto my desktop that is still running XP, but I would like to be able to take it with me on the netbook to do my homework whenever I find time.
Thanks,
Bill

Strange USB problem with 23" ACD: Please help

Okay I will take you through my entire experience and then if you have any ideas what the problem(s) could be, I am in serious need of assistance.
I have had a Mac Pro and 23" ACD for about 6 months now. Everything has worked beautifully. Then, last Saturday, I go to type on my keyboard (connected to ACD's USB), and it does not work. I plug the keyboard into the tower, it works. I try moving the ACD's USB connector to various ports on the Mac Pro, and nothing fixes the problem. But the USB ports work with any other device. So I think my monitor is bad and I take it to the Apple Store. He plugs my monitor into a MacBook Pro and it works just fine. So I go home and plug it back into my Mac Pro and it still does not work. Then I tried to reset the PRAM and NVRAM - this fixed the problem - temporarily. Things worked again for about two days and then the problem returned, this time not resolved by resetting the PRAM/NVRAM.
Out of curiosity, I plugged my ACD into my PowerBook and the ACD's USB ports worked fine, so I assumed I must have an issue with my Mac Pro's USB ports not giving enough power. A phone call to Apple Care supported this theory, and I am scheduled to bring my tower into the Apple Store.
But then today, just as a last minute check, I plugged my ACD back into my PowerBook to make sure that the problem is really in my Mac Pro. This time, the USB's did not work, even when plugged into the PowerBook. I tried moving my ACD's power cord to a different outlet, and then the USB ports worked. I thought this might have been the problem all along, so I plug things back into my Mac Pro - does not work. I take them back to the PowerBook, now it does not work.
I am completely confused by this because it is like sometimes the ACD's USB's work, sometimes not. I cannot figure this out... where is the problem... in my Mac Pro or in my Cinema Display? This is so frustrating.
Also, since this problem has surfaced, I no longer have control of brightness of my display from within OS X (10.5.4) and it appears that OS X is not seeing this monitor as being an ACD but rather a regular monitor.
Please, anyone, what do I do? I do not even know how to diagnose this problem anymore.

Okay I will take you through my entire experience and then if you have any ideas what the problem(s) could be, I am in serious need of assistance.
I have had a Mac Pro and 23" ACD for about 6 months now. Everything has worked beautifully. Then, last Saturday, I go to type on my keyboard (connected to ACD's USB), and it does not work. I plug the keyboard into the tower, it works. I try moving the ACD's USB connector to various ports on the Mac Pro, and nothing fixes the problem. But the USB ports work with any other device. So I think my monitor is bad and I take it to the Apple Store. He plugs my monitor into a MacBook Pro and it works just fine. So I go home and plug it back into my Mac Pro and it still does not work. Then I tried to reset the PRAM and NVRAM - this fixed the problem - temporarily. Things worked again for about two days and then the problem returned, this time not resolved by resetting the PRAM/NVRAM.
Out of curiosity, I plugged my ACD into my PowerBook and the ACD's USB ports worked fine, so I assumed I must have an issue with my Mac Pro's USB ports not giving enough power. A phone call to Apple Care supported this theory, and I am scheduled to bring my tower into the Apple Store.
But then today, just as a last minute check, I plugged my ACD back into my PowerBook to make sure that the problem is really in my Mac Pro. This time, the USB's did not work, even when plugged into the PowerBook. I tried moving my ACD's power cord to a different outlet, and then the USB ports worked. I thought this might have been the problem all along, so I plug things back into my Mac Pro - does not work. I take them back to the PowerBook, now it does not work.
I am completely confused by this because it is like sometimes the ACD's USB's work, sometimes not. I cannot figure this out... where is the problem... in my Mac Pro or in my Cinema Display? This is so frustrating.
Also, since this problem has surfaced, I no longer have control of brightness of my display from within OS X (10.5.4) and it appears that OS X is not seeing this monitor as being an ACD but rather a regular monitor.
Please, anyone, what do I do? I do not even know how to diagnose this problem anymore.

Asha 501 and USB problems with MAC OSX 10.9

I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
The problem is:
Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
Also:
- This problem does not show with Windows 7/8
- This problem does show with other Mac OS X
The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
Any help?
Attachments:
Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
John

HS-1000 USB problem with FlashPlayer

hi all,
i just bought Creative Fatal1ty USB Gaming Headset HS-1000, i installed the driver following the instructions and it works properly. I have problem when i have to see video on streaming on internet such as youtube videos or other that uses flashplayer, i can't hear nothing and don't know why, but if i see a video or i listen on streaming with windows media player it's all ok. Can someone help me please?
best regards
P.S. i have a strange buzz on the left speaker

i get this also
only sometimes tho and its in both speakers

N82 USB problem with win7

Similar Messages

Maybe you are looking for