N95 Hanging and Rebooting

Recently i bought New N95 and i updated firmware V20. after updated, my system hanging sometimes and rebooting automatically when i using the phone, and back camera not working properly

21-Dec-2007 07:40 PM
chrissey wrote:
I have the same problem too...
Phone hanging and rebooting after the use of some applications like, for example:
- video recording, the phone stops recording and reboots or stops "processing video" and reboots
- "Global race" game. It runs for a few seconds or minutes then reboots
- Wifi surf: after some time, reboots
I recently updated the phone to V20, before with the V12 the phone was running fine.
Of course I have "hard resetted" my phone two times, and re-applied the V20 update one time.
I've also re-formatted my two memory cards with the phone.
All of that with no success. Before I had a N70 and never have this kind of problem.
I seriously think It's a V20 issue. Is there any possibility to let it know to Nokia itself, for confirmation and correcting it in a future f/w release ?
I think you need to take it badly to nokia care points.

Similar Messages

After upgrading to ICS my Xperia mini (ST15i) hangs and reboot itself?

Ah I was very happy after getting official ROM of ICS but my happiness goes down very soon because now I'm facing many problems with my phone.
It is hanging most of the time at least once or twicw in a day, sometime hangs and reboot itself but sometime I have to estart it by remove the battery. When it hangs if my battery is at 90% and I remove the battery and put it back and restart it then it goes down to near about 70% or less.
Phone dial pad is very slow to open than 3rd party softwares. Back and Option key response very slow. I know this could be performance issue but this is too much.
However many apps goes to hang, mostley my browsers I wa using Boat and Dolphin HD browser and after upgrading I tries Chrome which also hangs. My phones battery drain so fast now also my phone heat too.
I tried to contact the support thorugh E-mail but still yet no reply so I'm here to ask this please help me guys. I have very slow bandwidth so please suggest me the good way to solve this problem. I don't want to downgrade but if its neccessary then I'll.

regarding the phone/dialer download Dialer One
regarding your battery life, you should check which apps are causing this
charge your phone 100% use it as you normally would then once it reaches 10%
settings > battery > take screenshots of this list an the graph, also tap on each item and take screenshots post them here
delete taskillers, antivirus, battery apps, ram apps as they slow down your phone, drain your battery and cause a lot of issues.
Don't forget to mark the Correct Answers & Helpful Answers
unrelated topic, if you have some time please check this thread
http://talk.sonymobile.com/thread/44888
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Apple TV 2 occasionally hangs and reboots

Despite a fresh reset and install of the latest ATV firmware. I still find occasionally when navigating around the ATV interface on my Apple TV 2 that it sometimes freezes and the cursor highlight will not move forward/backward/up or down... Then the next thing is the ATV appears to restart. During the restart I see the rotating cursor but no apple logo. I was wondering if anyone else was having this issue. It can occur at different places in the software including the front screen or navigating one of the menus in music or films etc. I have tried a couple of complete resets and it still happens. I live in uk and use iTunes Match 20,000 plus songs on the cloud and have two pc's set up for home sharing. The box is linked direct to my router over Ethernet cable... My internet is virgin media 100mbs.
Not sure if there is a problem with the latest firmware on ATV? Or if my device is on the blink?... Settings are almost at default except region is set to UK and screensaver set to iTunes Match floating album covers.
Just seeing if anyone else is experiencing the same issues

Sorry Winston these articles you have the posted links to, don't help as they are all wifi related and my ATV is connected over Ethernet cable, direct into my Netgear gigabit router model wndr3700.
I have not had the problems with the ATV until the last couple of firmware updates and other devices on my network are working fine (both wired and wireless connections) have no issues. Everything works and streams fine but randomly and every now and then when navigating around the ATV interface the thing just suddenly freezes and then appears to reboot... It only happens now and then and in different places. It particularly happens if I keep pressing the remotes up/down/left/right navigation buttons several times in quick succession.
It's like the interface is trying to catch up with my key presses, approx 3 or 4 presses in a row and the ATV gives up and reboots. That's the best way I can describe it. Like I say it has only occurred since the last couple of updates.... Prior to that the interface was quick and smooth and quick navigation was not a problem.

P965 Platinum hangs and reboot on initialize USB

I have been running my signature system on BIOS 1.7 for a while without problems. Memory have been set to 2.2V.
But the other day system didn't boot ok after being shut down, it hangs a bit when posting and saying USB something (normally it just goes on and lists USB storage connected) and then reboots.
I put only one stick in and booted and got it to pass post screen, went to BIOS and upped voltage to 2.25V put all sticks back in and could boot. After shutting down the problem came back.
Took another round but now set 2.3V. This seem to have solved the problem. What could be the cause of this?

Quote from: Del UK on 05-November-07, 04:07:49
Why did you upgrade to 1.7 bios?
I went from 1.0B I recall. Just got the latest didn't check in here before.

BB curve 9360 hangs and reboots by itself

my BB curve 9360 freezes for 10 mins quite regularly, bought it only 2 months back.
It reboots itself automatically no. of times without any reason.
I clear the cache from browser and other apps regularly, is it because of too many apps installed? I was told by someone that many people having this model of blackberry are facing the same problem, is it so? what can be done about it ?
Solved!
Go to Solution.

Hi sunny95arora
We can't say that they come through your Carrier network.So its better to use a call blocking application. As for OS is concerned yes you can install 7.1 in your device you are not bond or limited to your Carrier you can use any Carrier OS packagesall you had to do is just delete two vendor .xml files.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

N95 Crashes and Hangs

help please. My N95 crashed more than five times within 24 hours of my getting it. It would just show the logo and hang without rebooting or prompting to indicate whats gone wrong. For a while, removing and replacing the battery and SIM made it boot up again -- only to crash again a few hours after.
The N95 sent me running to the nearest nokia service center where they re-installed the software and managed to make it boot up again. But just when I thought the problem was solved, the darn phone crashed again when I tried to put in a new contact (ironically, the number of nokia repair!) The phone is now back in its box while I contemplate returning it to the store.
Thing is, I haven't even tried half the applications. Just setting up contacts seems enough to make the whole system collapse. This is the most unstable phone I've ever used!
Is my phone a lemon or is anyone else having the same problems? What's causing the crash and what should I do?

16-Apr-200704:23 AM
gin95 wrote:
help please. My N95 crashed more than five times within 24 hours of my getting it. It would just show the logo and hang without rebooting or prompting to indicate whats gone wrong. For a while, removing and replacing the battery and SIM made it boot up again -- only to crash again a few hours after.
The N95 sent me running to the nearest nokia service center where they re-installed the software and managed to make it boot up again. But just when I thought the problem was solved, the darn phone crashed again when I tried to put in a new contact (ironically, the number of nokia repair!) The phone is now back in its box while I contemplate returning it to the store.
Thing is, I haven't even tried half the applications. Just setting up contacts seems enough to make the whole system collapse. This is the most unstable phone I've ever used!
Is my phone a lemon or is anyone else having the same problems? What's causing the crash and what should I do?
16-Apr-200704:23 AM
gin95 wrote:
help please. My N95 crashed more than five times within 24 hours of my getting it. It would just show the logo and hang without rebooting or prompting to indicate whats gone wrong. For a while, removing and replacing the battery and SIM made it boot up again -- only to crash again a few hours after.
The N95 sent me running to the nearest nokia service center where they re-installed the software and managed to make it boot up again. But just when I thought the problem was solved, the darn phone crashed again when I tried to put in a new contact (ironically, the number of nokia repair!) The phone is now back in its box while I contemplate returning it to the store.
Thing is, I haven't even tried half the applications. Just setting up contacts seems enough to make the whole system collapse. This is the most unstable phone I've ever used!
Is my phone a lemon or is anyone else having the same problems? What's causing the crash and what should I do?
My new N95 locks up, heats up and drains battery charge quickly. This usually happen when I am browsing the web and it always hang half way. Very disappointed...!!!

RAC Node hang and unexpected reboot

Hello friends
We are facing the intermittent issue of node hang and unexpected shutdown of node. This is 2 node rac 10.2.03 running on windows 2003. Here's crsd.log
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: CLSC recv failure..ret code 7
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.058: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Physical connection (0000000003892080) not active
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 11
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.152: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.168: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.261: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
Please throw me the light, what may be issue.

I suggest you install [ IPD/OS|http://www.oracle.com/technology/products/database/clustering/ipd_download_homepage.html] on you cluster. This will give you all the relevant OS statistics so when a node reboot happens, you can figure out what the state of the nodes was at that time and then fix the problem. The hang is often caused by something other than Oracle RAC.

Reboot hangs and takes several minutes to reboot

Hello fellow archers I have a Vaio laptop and my system started to hang and takes several minutes to reboot.
I have no real clue as to why since poweroff works fine and reboot used to work fine.
I did a system update. And more recently migrated to systemd, may not be related
edit: I found a workaround. Adding the following to my grub kernel line
reboot=pci
But it does not reboot quite the same way, meaning the power led no longer goes off and back on.
Still haven't quite figured out why I can no longer reboot normally without this workaround.
Last edited by snoxu (2012-10-18 18:16:18)

I am also having this problem. When trying to reboot, I get an endless cycle of the BIOS screen, then "MACHINE ERROR", then back. Running the same dmesg command as snoxu results in a similar error message. I am forced to shutdown by holding the power button. Upon rebooting, I get an error message that all extensions have been turned off (using Gnome Shell). Then I have to logout and login.
Shutting down and then restarting works fine.
Additional info:
System76 Gazelle Professional laptop
syslinux, systemd, GDM, Gnome Shell

Ovi Suite 2.2.0.245 make N95 8GB hang and connecte...

My N95 8GB hangs and restarts automatically every 5-10 mins. My Device manager says, I have v 31.2.2008. And as soon as I connects to the Ovi Suite and my phone get added to ovi suite and when ready to sync, phone gets restarted automatically and keeps repeating and never get a chance to sync with Ovi Suite for the first time. I heard pretty bad about the Nokia services that they take all your time and with no output and it now proved when tried installing Ovi Suite.
Please make sure your services have highest quality and some regression test done across your software and phones. Please don't waste users valuable time.
Regards,
Kora.

Hi Kora,
Is your Handset gets restarted automatically only if its connected with your OVi Suite?
If yes, Please provide your Mobile details (*#0000#) and your PC details.
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Also are you trying to connect your handset thru' cable or thru' bluetooth.
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

TB hangs and I cant kill it with process explorer or task manager. Have to reboot. Problem is intermittent.

TBird V31.2.0: Windows 7 home premium with service pack 1: hp pavilion dv7 laptop.
Intermittently, TB hangs and I can't kill it with normal close, or process explorer, or task manager. I have to reboot to get a clean copy of TBird to view my mail.
Problem is chronic (about a 2 to 4 months). I updated TB several weeks ago but no joy.
The green bar (lower right) that indicates download progress is at max extent and stays their when the problem exists.
Error msg. appearing with attempt to kill TB says roughly - the instance of TB in not functioning. Kill it or reboot. Its a real pain to reboot. If someone could give me a clue to at least kill the hung instance of TB that would be a great help. I've been using TB for years on at least two computers and never ran into this before.
Thanking you in advance for any help offered.
Frank

Which operating system are you using?
Resetting the photoshop preferences might cure the problem.
Press and hold down the Shift+Ctrl+Alt keys down just after starting the launch of photoshop 7
(Shift-Command-Option on a mac)
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes

HT1338 I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.

Hangs and was rebooting also previously

I had purchased HP Pavilion dv2401tu Notebook PC one and half year back . Now from past 2 months i m facing problem.Firstly it use to hang and restart giving memory accesing issue when i use to open more than one or 2 windows.Now i realised that could be problem of the insufficient RAM for vista,so i upgraded the RAM to 2Gb.Now the PC is hanging and not responding.It also shut down after some time or i had to force fully shut it down.Please let me know what is the issue.

Hi,
First of all I would suggest that you try to reinstall the system to see if it gets better. You can do this using PC Companion:
http://www.sonymobile.com/update
In PC Companion, press start on Support Zone > Start on Update the phones software > "Repair phone".
Before repairing the software in your device you may want to backup your information first. Check out this topic for more information on how to:
http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253
What are your thoughts about this forum? Let us know by doing this short survey.

New desktop hangs, freezes, and reboots randomly.

Per the "Note Before Posting", here is my data.
Product Name/Number: HP Pavilion HPE-H8-1234 Desktop
Operating System: Windows 7 64-bit
Error message: None
Changes made: None. Out-of-the-box failures. Initial setup.
I just purchased an HP Pavilion HPE-H8-1234 Refubished Desktop (included with a 90 day warranty from HP). It arrived at my apartment yesterday. During the initial setup (within 5 minutes of turning on the machine), the computer hung, froze, and then rebooted itself. I spent much of last night updating the OS via Windows Update and repeatedly had the same problem. This probably happened 8 or so times over the course of an evening.
Are there any known issues with this computer that can be easily solved?
I think this may be a defective product.
Any information or help on either fixing the issue or returning the desktop would be appreciated.
Thanks in advance!

Follow-up, in case anyone in the future has similar issues and receives no support on the forums.
After three days of misbehavior, this computer is on its way back to HP.
Upon getting home from work the second day, I found the computer to be in a state where it had tried to reboot itself but could not make it back up. It was at the initial startup screen with three errors.
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
ERROR: No boot disk has been detected or the disk has failed.
Per chat request, they had me run a BIOS-based "DPS Self-test" on the hard drive. This was comprised of two tests, the first one relatively short (10 minutes or so) and the second one rather long (2 hours). The test came back as successful.
Next chat service had me use System Recovery to restore the hard drive to the factory state is was in the day before, when I got it. This succeeded, but shortly thereafter the computer exhibited the same problems. Random lockups, crashes, and reboots. Sometimes able to recover back into Windows, sometimes not.
I then emailed HP support, and they asked me to check the cables by removing and replacing them from the hard drive. They sent me full instructions on how to open the computer, remove, and replace the hard drive. This did not resolve the problem.
After this, they had me reset the BIOS settings. This too did not resolve the problem.
Upon reporting these results to HP via email, they instructed me to do the BIOS DPS Self Test and System Recovery. I had already spent nearly 4 hours the previous night doing these things, but I don't think the email support representative had read the chat logs I'd mentioned. After informing email support of these things, they agreed I did not need to do this again and began the process of setting up a return for the desktop.
It looks like it will take 3-5 business days for the shipping supplies to arrive, then the time for me to ship the desktop back to them, then another 5-7 business days of repair at HP, then the shipping time thereafter for the desktop to be returned to me. I therefore estimate the total time between my original purchase of the computer and me receiving a working desktop to be on the order of 1 month. Frustrating indeed, but I guess that's how the cookie crumbles.
Either way, I'm looking forward to having this new computer up and running. It's too bad this one ended up being such a lemon, but once it's working I'm sure I'll be a happy camper.

Ipad 4 Retina display keeps freezing and reboots

the past week my Ipad 4 has been having problems with freezing and rebooting. I deleted a game app which I thought was the problem and now when I use my email app it will start to freeze then reboot. Of course my warranty has just run out when this happened. I have tried the stadard things up to resetting but not a complete restore yet. Sometimes when rebooting it will hang and I get pixilation etc. This is very frustrating any ideas? IOS 7.04. 32GB.

Did the standard things include Settings>General>Reset>Reset all settings? You could have a corrupt setting that is causing problems. You won't lose any data, but it takes some time to enter all of the device settings again and you will have to do that if you reset all settings.
If that doesn't work, then you probably should backup, restore to factory settings and them restore from the backup. If that fails, then the next step is to restore as new and not from the backup, them rebuild the iPad by adding your apps and content methodically looking for any signs of further problems.
Use iTunes to restore your iOS device to factory settings

My ipad 2 turnes to black screen with the apple icon in the middle, it just hanged and i have to restart it?! so why this is happening ?! is there is an error or something i can do to prevent doing this ?!

my new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
Appreciate responding as soon as possible.

No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process.

N95 Hanging and Rebooting

Similar Messages

Maybe you are looking for