N95 updating problem(GPS)

Hi to all.After updating my new Nokia N95 i cannot use the GPS Any solution for this poblem?Thanks...

Hi megadeth_8
In what respect can't you use application, can't open, can't find satellites or can't find maps?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

N95 updating problem - cannot identify device

Please can somebody help?
Nokia software can detect it but my N95 cannot be identified
And is updating with NSU tha same?

Ok so I´ve got good news Today I´ve phoned to Nokia and they told me that they have some problems and becasuse of this we cannot update So we should just wait and try in 2 days or so

Nokia n95 updating problems

i have problems updating my phone to the newest version as it dowloads it ses updating failed then it ses connect you phone straight ti the usb hub behind the p.c after doing it 5 times its still has the same problem what can i do how cam this be solved

Hi,
Thanks for the answers.
At the end, the only option had been to take the mobile to a Nokia Center. So I'm without GPS...
One thing that i don't understand is how Nokia don't change the way of updating the phone firmware, as the actual way don't seem secure...
The technician in the Nokia Center recommended me that the next time it's better that I don't try to update the phone because it fails a lot of times. (Also said that there are no benefits in updating it... I don't agree much with him :-P). But as i have seen on the net, that kind of error happens a lot, leaving the mobile "dead" and the only way to repair it, is sending the mobile to Nokia...
At least the warranty covers it and the repair is for free...
Kind regards,

N95 update problems

Hello, I'm from Lithuania, but my phone is from england. So I want to update it.
[img]http://img249.imageshack.us/img249/6578/nokiacn9.jpg[/img]
Nokia software updater show this and don't do anything, and I waiting about three hours for finish
My phone show only NOKIA. What's the problem? Sorry for very bad english language

I had the same problem when trying to upgrade software on my Nokia N95.
Part way through the SoftwareUpdate upgrading my software on the N95 (using Software update 1.4.98en running on Windows XP Pro SP3) it prompted for the "BB5 ADL Loader"driver to be installed.
I eventually found out the problem was caused by "Spybot Search and Destroy" stopping either PC Suite or the Nokia Software Updater installing properly when they were initially installed. To fix this I did the following:
1) Uninstall Spybot Search and Destroy (or at least disable it's services)
2) Uninstall Nokia PC Suite and any associated USB cable drivers
3) Make sure you phone is not connected
4) Reboot the PC
5) Re-install the latest PC Suite for your phone
6) Connect your phone by USB cable (or bluetooth) - and allow drivers to install
7) Run Nokia Software update
This time the drivers should be recognised and auto-install.
Good luck!

N95 update problem

Hi i hav just bought N95 with software version (10.0.018) but when i connect it with software updater it shows that there is no software available.however in news the software version 21.... something has been released.so what should i do.

The answer is here:
http://linux.sgms-centre.com/nokiafaq/branded-phones/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I like to know how to User a Nokia N95 8GB, as GPS...

Hiya Everyone,
I had download a great app called KISMAC Trunk for MAC OS X 10.5, within the app it has a GPS map, but i cannot work out how, by using my Nokia N95 8GB phone, as a GPS receiver, i can see that the N95 is getting singles from the satellites, but i would like to know if there is or is not, away for the GPS data to be able to be used by KISMAC software?
I have tried loads of thing, but i cannot get the Phone and the MAC to used the GPS data
Please can anyone shed any light how i could get a fix from my problem?
Thanks
Flouts

*nod@scoobyman*
and i can report success with [ http://www.symarctic.com/beta/static.php?page=extgps_download ]
i haven't used it in a while now, but if i recall correctly i used this app on my N95-1, and something like gpsX on my Powerbook to receive the gps data.
at the time i found these apps by searching for info on using my N95 as a GPS for google earth. i'd bet searching for info re: google earth will turn up more results than searching for info re: kismac (one is a bit more socially acceptable than the other).
goodluck,
-bit
N95-1 ---> N97-NAM ---> N900 ---> E7-00 + N900 (I use them both)
(N95 was pretty good, N97 had potential but utterly failed to deliver, N900 is absurdly good. Those of you wondering, "should I try N900/Maemo/MeeGo"? The answer is a resounding YES)

N95 update - error 1720 message. Any ideas??

When I try and download the N95 update, i get a message saying 'Error 1720. There is a problem with the windows installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process script error -2147023898,: line 5 column 1,.'
I have no idea what this means, or how to fix it. Can anyone help??
Thanks,

Hi, what version of NSU can you not remove?
I am having same problems (XP user), so frustrating, it's NSU v1.4.32en I cannot remove, when I try and uninstall it I get the message 'This action is only valid for products that are currently installed.' and when I try and install the latest version I get the message 'Missing Software Components. Critical software components are missing. Please reinstall.' then Error 1720.....
Anyway I followed some suggestions, notably uninstalling all trace of Nokia programs (PC Suite & N Series PC Suite) then searching my PC for any Nokia .msi files and deleting those too along with all possible Temp files/folders, then I've tried installing lastest NSU again and still get the same result but also get 'Error 1714. The older version of Nokia Software Updater cannot be removed. Contact your technical support group.' when trying to run the NSUsetup.msi
I've also just reinstalled N Series PC Suite and the Nokia Nseries Update Manager has been stuck on 'Checking for the latest software versions. Please wait' for the last hour and 10mins!
Luckily I've been able to get hold of a laptop to update my N95 8GB later today, but what happens in the future - I' stuck with never being able to update my phone on my desktop (and only) PC... That would be reason enough not to buy another Nokia N series phone and move to another make after 7+ years of nokias.....
The tech support need to sort this problem out asap before they start losing customers.
Not a trace of old NSU versions available too which is probably all that's needed to repair then update or uninstall v1.4.32 that the problem lies with!

E71 - Software Update now GPS takes 15min to lock ...

Basically I updated my E71 to the 210 firmware and now it
takes 15 minutes for the GPS to lock onto the satellites. I took the phone to
the care centre in the hopes they could run the old version of the software
back onto the phone.
They were very nice and the service was good. The only
problem is they didn’t fix the problem.
They said the Technician replaced an important signal device
in the phone, no more description than that was given. I tested the phone there
and still had the same issue with the GPS.
When I was using the phone before the latest update the GPS
took less than 30 Seconds to lock on. This was great but I tried to explain
this to the technician and he kept going on how it takes 15 minutes the first
time which can’t be right unless I was just unusually lucky the first 50 or so
times I would have used the phone before.
Now since I have been using the phone after taking it to be
fixed I find it is interfering with audio equipment where you can hear the noise
of the phone trying to get a network signal which never happened until I took
it to the Nokia Care Centre.
I am at a loss now because the GPS still takes 15 minutes or
more to lock onto a satellite signal and now the phone is causing interference
with audio equipment.
I have actually tried emailing Nokia through the contact us
form on the site which does not seem to be working. I will call them during the
week but I fear I will not be able to explain the issue to the service centre
staff as it got me nowhere in the first place.
Has this ever happened to anyone?
Solved!
Go to Solution.

Thanking you kindly scoobyman.
I did actually change the setting in -
-Home menu
-Tools
-Settings
-General
-Positioning
-Positioning Server
-Access Point.
Access point is what I had orriginally changed to none.. which I actually thought was a smart Idea because I was under the impression that it would ammount to data charges on my plan here in Australia.
A day ago I had changed the access point back to the orriginal setting... and would you know it... all fixed.. GPS is back to its chirpy self again and locking on in less that 30 seconds as apposed to the technicians 15 minutes.
Now I am really annoyed with the fact that the Technician has buggered something up internally when it was just a setting.
I am going to have to take the phone back to the repair centre to fix what they broke.
Thanks for the help though and I hope if anyone else has the same problem they dont go to the service centre first thing!

Nokia N95 USB Problem

I have a problem with my Nokia N95-1 considering the USB transfer to my Memory Card.
I have a 1GB Kingston MicroSD, the latest software (V 20.0.015, 13-11-07, RM-159, Balkans Pack, updated from V13); PC Suite v6.85.14.1 on Windows XP Professional.
While I was transfering some 300MB of music to the MicroSD, Explorer crashed and reported that data might have
been lost during the transfer. I checked my phone and noticed "ghost" files on the memory card (free memory was reduced by 300MB, but the phone couldn't register new files). I retransfered the files, disconnected the phone and started the Music Player.
Music Player said "Repairing corrupted database", hanged for a while and then added newly transfered files to the track list. But, when I tried to play a file, it refused to do it and said "Generalystem error". Phone became slow and impossible to operate, so I had to restart it. Same problem occured again, and similar things happened in File Explorer (shows nothing on the card), LCG Jukebox and LCG Xplore (get stucked when they access it or refuse to start files).
After this, I removed the MicroSD - after this, everything on my N95 returned to normal.
Since then, I've tried to change the USB Cable, USB Port, USB Transfer mode; tried to reformat my MicroSD many times with many formatting tools - Phone Memory Card Manager, Windows Formatter, KillDisk, Panasonic SDFormatter - but the result always remained the same: after I retransfer the files to the card, it becomes useless until I reformat it again.
These programs didn't register any corruptions, but Windows Formatter and Panasonic SDFormatter would sometimes report that they were unable to reformat the card.
I tried to insert the MicroSD into my MSI Mega538 MP3 player, reformat, and then transfer files to it. Again,
transfer itself worked okay, but when I inserted the card into my N95, same problem occured. I tried to transfer
some files to the Phone Memory via PC Suite - it worked great.
I tried to insert my friend's 1GB Kingston MicroSD into the phone. It registered it perfectly - Music Player has
refreshed the database, registered new files and played them without any problem. Same goes for the Gallery - some
400 images and videos were recognized right away, and the phone itself worked fast and stable.
When I bought my phone, I had no problems at all - files could be transfered normally, Music Player would simply
refresh the database, and I could use the files easily - no problems, system errors, system hangs or restarts. But after that Explorer crash, I simply can't use the memory card any more.
Sorry for long post, but I really need your help. Is the memory card corrupted, is it a hardware or software problem
with my N95, or is it a Windows glitch?

Hi ivanik,
I strongly believe this is an issue with the card. Seeing that the phone works fine without it and works with a different card perfectly...
Perhaps it is an issue with the data that your transfering to the card. It may not be compatible to the phone. Thus the phone lags and doesnt play the files.
Try loading different data... perhaps one from a source...
Try this once you have formatted your card...

Trying to update my GPS app i get an insufficient memory memory which is not true. I cannot seem to reinstall it; getting same message. Advise?

Trying to update my GPS app I get a false message sying I have insufficient memory. I tried deleting the app to reinstall it but seemslike it si trying to charge me again. At any rate, why, with sufficient memory will it never update this app without reinstalling it? (I may be off one OS number)

You will need 3 to 5 times the app size in free space during the app's installation. Once the install is complete, you can reuse that free space. If I have to update a big app like Navigon or TomTom, I remove my music videos or a movie or two. After the app is installed, I can sync again to replace the items I removed.
If you are trying to download the app again from the app store, you have to click the "Buy" button and you will get a message about your credit card being charged, but when you continue, you'll get the opportunity to download the app again without charge. This explains how the priocess works and shows you the screens you will see:
How to redownload purchased apps from the App Store, http://support.apple.com/kb/HT2519

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

10.5.7 update problems

After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

jjtopspin wrote:
Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

N95 updating problem(GPS)

Similar Messages

Maybe you are looking for