N95 - Utterly Useless !!!

i have to say i have a love hate relationship with this phone. Some days i love it when parts of it work and hate it when nothing seems to work.
Where to start
GPS . Utterly useless ! I live in London which is flooded with with coverage and it takes at least 7 minutes to get a signal and when it does it get signal it either can keep it or the accuracy is 15 meters. Tracking GPS usage using Nokia Sports Tracker the recorded route is crazy erratic .
Here us an overlay from NST : http://www.5mt.co.uk/n95/images/gps_out.png
Anyone getting any use out of this at all ?
and then that brings me on to what drives me crazy .
Camera !!!
I hear there's mystical green auto-focus "OK" screen when taking photo's . Now i know I'm being sarcastic as I've got some "OK" shots using the phone but anything with colour contrast or light and dark areas the camera just cant focus. This is on long focus landscape shots and buildings it's just awful.
Example :
In Focus : http://farm1.static.flickr.com/244/461790913_e40ee0a4f3_b.jpg
Out of Focus :
http://farm1.static.flickr.com/228/461790441_300f0be793_b.jpg
wouldn't even attempt to take anything that is fast moving
Anyone got any tips or pointers as i very much doubt i have a duff phone. Luckily enough the phone is on 14 return and I'm almost positive right now it'll be going back long before that time.

After some Mountainbike tours with the N95 runing Sports Tracker and a Wintec WBT-100 Data Logger (placed on top of the backpack) for reference my experiance is this:
When used with open slider and good visibility to the sky (e.g. mounted on the bikes handle) the N95 delivers a very good signal, comparable with the WBT-100.
In real life I would not want my expensive and dear N95 on the handle, but in the pocket of my shorts with the slider closed. Like this the qulity of the signal is obviously much worse and the track log in Sportstracker get's very eractic in inaccurate.
The first firmware of the WBT-100 showed the same inaccuracy, specially at low speeds. Wintec fixed this in a later firmware version and their tracking is very accurate now. So I guess Nokia has also room for improvement on the GPS algorithm. The minimum they should do is add a "normalising" or filter function in Sports Tracker. Often it logs big speed and position "jumps" what are just not realistic and the software should remove them.

Similar Messages

HT204406 Since updating to ios6 on my iPhone 4S iTunes Match has not worked. The app stays open for about five seconds before crashing. With ios5 it was great and worth paying for. Now it is utterly useless. Apple, please listen and fix this problem.

Ever since I updated to ios 6 on my iPhone 4S, iTunes Match has not worked.
I have been through the process of deleting my iTunes control files, and that worked temporarily, but now I cannot listen to music through the service.
It shows my artists and albums, then takes forever to access the songs (often more than 10 minutes - and yes, that's using WiFi), more often than not crashing before it gets to that point, then repeatedly crashing when I try to open the Music App, so I can't even access things I've downloaded.
Has anyone else found a solution?
Apple, please listen up - I am paying you for the iTunes Match service that is utterly useless. Fix it please.

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Furious! Utterly useless!

Evening all,
Right now, I am furious with BT.
I live with my retired parents a few weeks ago it was decided that I would take over the phone bill.
We rang BT to be advised that it was not possible to transfer the name on the account and that a new account would need to be set up with a transfer date and time. We asked if the number would remain the same and the answer was yes.
We were assured multiple times that as it was an account transfer the telephone number would remain the same. I even had a call last week from BT to confirm that I was taking the line over and they also confirmed the telephone number would remain the same.
Bang on 9pm tonight I got a text saying the transfer was complete and it said to dial a number to hear what the telephone number was.
I have just discovered to our horror that BT have given us a completely different number!!!!!! Complete conincidence the text arrived the moment the call centres closed?
This is completely unacceptable and to top it off, I said I would accept online billing and no-one has told me the new account number.
Utterly Useless BT! Completely unacceptable service.
Andy

Perhaps its associated with this post, as you said you wer moving from Sky to BT?
https://community.bt.com/t5/BT-Infinity-Speed-Connection/quot-Accepting-Orders-quot-but-can-t-order-...
A new order has probably been raised.
You cannot change the name on an account. The original account must be cancelled, and a new one created.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help Desk is utterly, utterly useless!!!!!!!!!!!!!...

Lat night I lost my Infinity connection. This morning I realised that there were no lights on the white Openreach modem. It occurred to me that it might be the power adapter, rather than the modem itself.
Fortunately I had a spare adapter from a HH3 which has the same rating as the one used in the modem. This was when I made the mistake of phoning the No Help Desk. After 10 minutes and many stupid suggestions, even though I had said that the solution to the problem was a replacement Switching Power Supply, and having to wait while the lady on the No Help Desk spoke to her supervisor and generally fiddled about wasting my time, I was told that an engineer would have to come out. Another few minutes went by with no appointment being given to me so I said forget it and hung up.
After a few seconds they rang back, passed me to the technical no help desk who again wasted time making useless suggestions, saying that an engineer would have to come out, saying she wanted to speak to her supervisor and making me wait while she arranged an engineer's visit.
About 20 minutes after I started the call I finally told them to forget it.
Why do they call it a Help Desk when they do no such thing.
Is there another way I can get a replacement Switching Power Supply which will take me 30 seconds to install?
Viv

Be careful. I thought I had the same issue, flashing sync light on modem, changed PSU (from Linksys router) and hey presto started to resync.
However couple of days later, modem stopped syncing again, no matter what power adapter I used.
Next day BT technician came, we first tried swapping the just PSU for modem and modem would not sync, so not the power supply. Swapped modem to replacement and it synced first time. New modem worked fine using old PSU as well. I have had two modems fail like this. Technician said never seen a PSU fail, but modem fail, well he was on his first of many swap overs that day !!!.
As the help desk said and probably knew, but you wouldn't listen, it is the modem that is faulty and just a fluke like mine that PSU switch made modem work, for a while.
I have had 4 modems, until finally got one that hasn't failed before I switched to the infinately more reliable and powerful and usefull and 24/7 Draytek 2750.

Watches are (still) utterly useless

On the old Jive forums, the watches page showed you which threads you're watching, have been updated.
Shortly after the upgrade to new Jive, I raised the issue that the new watches page give you absolutely no indication of which threads have since been updated. I was told at the time that certain features were still disabled until the forums running the new s/w is stable enough.
Surely, over half a year later, stability has been achieved? And if so, why is the watches page still as useless as after the Jive upgrade? With watches not working, it is incredibly difficult to track updates to watched threads.

Billy Verreynne wrote:
Er.. +<suspiciously eying Boneist>+ thanks.. +<checking next to me making sure the 2nd full beer can is still there and had not been swiped>+Oh, you needn't worry; I don't do beer (or other alcoholic related drinks) - never found anything I liked the taste of, and can't see why I'd ever want to acquire the taste either! Besides, when everyone else gets tipsy, that's when they start reaching my level; I dread to think what it'd be like if I did drink! {noformat}*laughs*{noformat}
Oh yeah.. you guys up there in the northern hemisphere had the sun turned up a tad. We had a couple of those down south as well this past summer. Hot enough to boil a monkey's bum. According to Bruce anyway...
;-)I'll take your word on that! *{;-)

Why am I unable to resize my images? iOS 7 is utterly useless

I downloaded an image and wanted to set it as home screen. When I opened it it had increased in size and I wasn't able to scale it down. This started after downloading the latest iOS. Apple this is an epic fail.
1. The software has slowed my iPad (4G) considerably
2. All my ringtones were deleted and wouldn't still can't sync from iTunes
3. I detest the Safari homepage
4. I detest the new functionality
I HATE HATE THIS NEW SOFTWARE. MAKE IT STOP!!

Did you:
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Does the HDMI input on the TV work when connected to another device using the same cable?
Maybe a bad mini displayport to DVI adopter

Topic: Feedback Forum becoming utterly useless Part2

Another problem that makes it diifficult to find threads you need to post to is under old system when you received email notifications the subject line of the notifications were identical to the subject line of the actual post. So people knew what forum they are in.
Now with the new system notifications use the arcane system of: "Apple Discussions forum "Feedback about New Discussions" has been updated by Michael Wasley" which make it difficult even for Email Clients and web Browsers to thread the subjects properly.
I have posted this complaint as a standalone subject and as a reply to several post. I have yet to hear from a sysop, nor moderatator why they are making it so difficult to traverse the system. Perhaps, if this was changed you might receive less missplaced post!?

Hi Donald
This is how they come to me with links to specific forum or to thread.
To view the topic, visit:
http://discussions.apple.com/thread.jspa?messageID=1393250#1393250
To view the forum, visit:
http://discussions.apple.com/forum.jspa?forumID=1076.
as for "logging in" i do not beleive it is necessary if you only view message.
regards Eme

N95 BATTERY COVER

THE BATTERY COVER ON THE N95 IS BLOODY USELESS - I HAVE HAD 6 REPLACEMENT THROUGH - THANK GOD - CHEAP - EBAY.WHAT A DESIGN FLAW - EVERY TIME THE PHONE HAS A SOFT FALL OF SAY THREE FEET THE BATTERY FORCES ITS WAY OUT AND BREAKE THE FOUR LUGS ON THE BACK COVER -UTTERLY USELESS. WHAT DO NOKIA SAY - SEND MY PHONE TO A LOCAL NOKIA/02 SHOP. WELL ALL I WANT IS THE 4 UK POUNDS A TIME IVE SPENT EACH TIME BACK

ivor wallison
Yes, I have had exactly the same problem with my own N95...
...and without even dropping it.
All I did was open up the back cover to insert the SIM card, and then replace the cover. Alas, at that early stage I hadn't noticed how very fragile are the "hooks" that hold the cover to the phone.
Lesson learnt:
now very careful;
to date only that single replacement.
It would indeed be nice were the "hooks" to be a little more robust.
5800XM (RM356) V21.0.101; N95 (RM159) V21.0.016; N82 (RM313) V31.0.016; N79 (RM348) V11.049; 6233 (RM145) V05.60

I am utterly unable to make iMovie 10 do anything at all!

"Up"graded to iM 10 after updating my OS to Mavericks, and cannot open any Events, cannot get iM 10 to even recognize any of my old projects, can't even get the stupid screen to re-size, can't do a single solitary thing with it but open it and close it. It seems to be an utterly useless load of *(^&(*&). How do I restore the older version (iM 9.0.4) to my computer and get rid of this total piece of bunk called iMovie 10?

souljuice wrote:
does anyone else have any solutions?
I'd keep using iMovie version 9.
Have you tried opening iMovie in a newly created user account? It's a good way to test that there's not something about your account that's causing problems.
I can also tell that on some system, iMovie version 10 can tak a really log time to load which can give the mistaken impression that its frozen.
Matt

Apple Music app landscape mode USELESS!!!

Ok, I need to bash Apple, not because I hate them...I love them an they get more of my paycheck than anyone, but update after update, Apple does nothing with the utterly useless landscape mode of a the music app!
To see all my album covers is cool, and maybe I just have too much music, but it would probably take more than 30 minutes to scroll to look for something. I can't imagine anyone can find this useful...or maybe I'm alone in my misery? Esp on my iPhone 6 plus there could be so many better ways to utilize this.
Just had to vent my unhappiness with the current way it is...hopefully one day Apple will make it better.

fltsdsurf wrote:
Submitting feedback is nice in theory, having a post that consumers can see is another.
Do you honestly think posting gripes about this will accomplish anything? If your intention is to somehow utilize this forum to force Apple's hand to improve the Music app, you're either naive or delusional. This is a technical support forum, not a place to air your gripes. This is not a technical problem that can be resolved here, so your contribution on this issue has no place here. There are countless other forums or blogs where you can spout off about how silly the Music app is, but doing so here is against the terms of use that you agreed to.
Now before you accuse me of being an Apple shill, I'll certainly admit that I too find the horizontal view of the Music app to be zero use to me. I really can't see how it could be beneficial to anyone with more than 100 albums on their device. The former carousel Apple called "Coverflow" was far more useful, where at least it would display albums in the vicinity to what you're currently listening to, and had a neat (but gimmicky) feature where the covers would shuffle like a jukebox when the album changed
There are plenty of things that Apple does that I disagree with, but the difference is that I'll use the resource that Apple provides its consumers to provide feedback. They may not take my comments into account, or maybe they will, but I'm not going to foolish to think that complaining on their technical support forum will have any impact, other than to make me look silly.

Cant delete ad-hoc network

Hi, I connected my N95 successfully to my wlan at home so I could sign up for navigation. Since then I've been unable to stop it trying to connect to the network.
In my efforts to get round this I change the name of the wlan and now the phone has created an ad-hoc network of its own which it automatically connects to and I STILL cant get rid! I'm not even sure what application is keeping the connection open!
All the solutions I've read don't seem to apply here and I'm out of ideas myself. The phone is now utterly useless until I manage to solve this.
Here's hoping someone has an answer for me!
Thanks in advance
Solved!
Go to Solution.

m8,
Have you tried hard reset or format the phone? Codes are available on this forum at sticky sections "usefull codes".
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Parental Controls Broken After Updating an Application

I'm using Parental Controls (remotely) under 10.5.4 to manage what applications can be opened in a small lab. This works well until I need to update an application on the lab computers. I'll use Firefox as an example, but this happens with all applications.
- I have a version of Firefox on all lab computers (3.0) and Firefox is allowed under parental controls. Everything works.
- I update Firefox to 3.0.1. (In this case, I simply overwrote the older version of firefox, but I get this problem when updating applications with installers.)
- If I remotely look at the Parental Controls settings for the lab computer, I can see that Firefox is still allowed (checked)
- Now, on the lab computer, I log into the managed account and try to open Firefox, I get a warning about the application not being on the allowed list.
- I log out of the lab computer, and again, access the parental controls setting remotely. Now Firefox is Not Allowed (unchecked).
- I check the box to allow Firefox
- Now when I log into the managed account, the new version of Firefox opens.
Some fixex / workarounds I have tried:
- After updating Firefox, I remotely accessed the parental controls settings and first disallowed (unchecked) Firefox, close parental controls, reopened it, and then allowed (checked) Firefox. When logged into the managed account, opening Firefox produced the not allowed error. When I return to the Parental Controls settings, Firefox is now Not Allowed (unchecked). Checking the box to allow Firefox fix the error.
- I've tried restarting after updating Firefox and it did not work.
My guess:
I assume that Leopard keeps a list of applications and versions installed on the computer. Parental Controls allows a specific combination and any update will break the parental controls. To allow this updated application to be opened, its old entry in the list must be updated to reflect the new version. The only way I have figured out how to do this, is to try and open the updated application and fail. Then I can finally allow the updated version.
Does anyone know of an automated or scritable way to do this. I have tried working with lsregister, but have not had any success. I need a way to force Leopard to reload / refresh its list of installed applications, with having a user logged into the console.
For a different solution, does if you can send a UNIX command to machine sitting on it login screen, that will cause the machine to login as a local console user. I could then send "open /path/to/updated app" and a logout to force the application list to be refreshed.
Many Thanks in advance for any help.

Hi! Did you ever receive any feedback on this issue?
I am interested since I have noticed the exact same frustration with Parental Controls since updating to 10.5.
While a very good idea, I think the parental controls, especially with respect to permissions about applications is utterly useless at the moment. It is completely stupid that I have to reset the permissions for applications each and every time I update an application. I have three children who use the computer and I don't want them using every bit of software on the eMac. They are naturally curious and will click on programs that can do damage without realizing is.
I have also turned off any parental controls regarding web browsing but my children still hit many sites that are blocked by Parental Controls. I do have a linux gateway that does the filtering quicker and better.
If anyone at Apple is listening ... please spend some time to fix this for the next update.
Thank you.

How to apply the constraint ONLY to new rows

Hi, Gurus:
   I have one question as follows:
   We need to migrate a legacy system to a new production server. I am required to add two columns to every table in order to record who updates the row most recently through triggers, and I should apply not null constraint to the columns . However, since legacy system already has data for every table, and old data does not have value for the 2 new columns. If we apply the constraint, all of existing rows will raise exception. I wonder if there is possibility to apply the constraint ONLY to new rows to come in future.
Thanks.
Sam

   We need to migrate a legacy system to a new production server. I am required to add two columns to every table in order to record who updates the row most recently through triggers, and I should apply not null constraint to the columns .
The best suggestion I can give you is that you make sure management documents the name of the person that came up with that hair-brained requirement so they can be sufficiently punished in the future for the tremendous waste of human and database resources they caused for which they got virtually NOTHING in return.
I have seen many systems over the past 25+years that have added columns such as those: CREATED_DATE, CREATED_BY, MODIFIED_DATE, MODIFIED_BY.
I have yet to see even ONE system where that information is actually useful for any real purpose. Many systems have application/schema users and those users can modify the data. Also, any DBA can modify the data and many of them can connect as the schema owner to do that.
Many tables also get updated by other applications or bulk load processes and those processes use generic connections that can NOT be tied back to any particular system.
The net result is that those columns will be populated by user names that are utterly useless for any auditing purposes.
If a user is allowed to modify a table they are allowed to modify a table. If you want to track that you should implement a proper security strategy using Oracle's AUDIT functionality.
Cluttering up ALL, or even many, of your tables with such columns is a TERRIBLE idea. Worse is adding triggers that server no other purpose but capture useless infomation but, because they are PL/SQL cause performance impacts just aggravates the total impact.
It is certainly appropriate to be concerned about the security and auditability of your important data. But adding columns and triggers such as those proposed is NOT the proper solution to achieve that security.
Before your organization makes such an idiotic decision you should propose that the same steps be taken before adding that functionality that you should take before the addition of ANY MAJOR structural or application changes:
1. document the actual requirement
2. document and justify the business reasons for that requirement
3. perform testing that shows the impact of that requirement on the production system
4. determine the resource cost (people, storage, etc) of implementing that requirement
5. demonstrate how that information will actually be used EFFECTIVELY for some business purpose
As regards items #1 and #2 above the requirement should be stated in terms of the PROBLEM to be solved, not some preconceived notion of the solution that should be used.
Your org should also talk to other orgs or other depts in your same org that have used your proposed solution and find out how useful it has been for them. If you do this research you will likely find that it hasn't met their needs at all.
And in your own org there are likely some applications with tables that already have such columns. Has anyone there EVER used those columns and found them invaluable for identifying and resolving any actual problem?
If you can't use them and their data for some important process why add them to begin with?
IMHO it is a total waste of time and resources to add such columns to ALL of your tables. Any such approach to auditing or security should, at most, be limited to those tables with key data that needs to be protected and only then when you cannot implement the proper 'best practices' auditing.
A migration is difficult enough without adding useless additional requirements like those. You have FAR more important things you can do with the resources you have available:
1. Capture ALL DDL for the existing system into a version control system
2. Train your developers on using the version control system
3. Determining the proper configuration of the new server and system. It is almost a CERTAINTY that settings will get changed and performance will suffer even though you don't think you have changed anything at all.
4. Validating that the data has been migrated successfully. That can involve extensive querying and comparison to make sure data has not been altered during the migration. The process of validating a SINGLE TABLE is more difficult if the table structures are not the same. And they won't be if you add two columns to every table; every single query you do will have to specify the columns by name in order to EXCLUDE your two new columns.
5. Validating the performance of the app on the new system. There WILL BE problems where things don't work like they used to. You need to find those problems and fix them
6. Capturing the proper statistics after the data has been migrated and all of the indexes have been rebuilt.
7. Capturing the new execution plans to use a a baseline for when things go wrong in the future.
If it is worth doing it is worth doing right.

Problem with text resizing and moving

After much pain with this issue, I'm going to ask for help.
The whole issue(s) resolves around text upsizing, changing and moving in Muse.
No amount of grouping, layering and locking has stopped this issue for me.
I don't have divs that are a pixel off and whatnot. This happens even when I have a blank site and I test it (as seen in the example pic below).
The majority of the time, this is an issue when viewing Muse created sites on Android, although text does move when viewed on iOS.
Example 1:
I have a square div. I put text in the div that I want to stay contained in the div. Basic right?
View site on browsers and iOS devices it generally plays by the rules (although not always, there are some movement going on). When viewing this example text and div on an android device, the text resizes larger. This results in the text overlapping the div and moving EVERYTHING below it down. This makes it impossible to tightly design anything for a website.
I know Android has options within it for users to set text viewing size, but this worthless from a web designer standpoint. That is something I can't control.
Example 2:
I have 1 text field and set the typeface to 15. There is nothing else on the page, just a background image (under "Fill"). Viewed on browsers and iOS looks fine. When viewed on Android this text balloons to some enormous size (25+) that makes the website utterly useless. This random resizing makes it impossible to design to.
Example 2.5:
I take that same text from example 2, copy it into 2 of the same size text fields. They are placed next to each other, taking up the same width as Example 2. It now looks like 2 columns of text. Set the typeface to 15 again. I view it on Android and get the resizing issues from example 1 not example 2. It's noting to the extent of example 2 but like example 1, it still changes enough to ruins any design I'm trying to accomplish.
Is there any place in Muse to lock the text? I don't want to make the text into an image (obviously).
I been dealing with this in Muse for 6 months and haven't been able to find anything online or in forums about. I understand with the bevy of platforms out there nothing will look the same across the board, but right now I don't see how I can continue working with this issue.
Am I the only one dealing with this?
Thank you for any assistance.

Welcome to the annoying realities of working with text on websites... Nothing you describe is unique to Muse.
Every browser has it's own text engine and thus each line breaks text differently. Even the exact same web page on the same computer with the same fonts will sometimes result in different line breaks in different browsers, or even in different versions of the same browser. It's just a side effect of the nature of determining a line break, where even the most miniscule difference in calculations can result in an entire word fitting, or not fitting.
There are two "tools" that are especially important to understand and use effectively in order to create designs that work as effectively as possible with the variation in line breaks from one site viewer to the next.
Text Frame Height Always Matters
If a text frame is drawn to the exact height of the text wthin the frame, then any increase in the number of lines of text due to changes in line breaks will result in the text frame growing and other objects below the text frame being moved down.
If a text frame is drawn larger than the height of the text then when line breaks change the text frame won't grow unless the changes in line breaks are severe enough to result in the flowed text being taller than the text frame was originally drawn.
If you resize a text frame smaller than the text within the frame in Muse Design view, the frame will snap back to be large enough to accommodate the text, but a dotted horizontal line will appear within the text frame indicating the "minimum height" for the text frame. If line breaks change in the browser the text frame will grow or shrink in height down to the minimum height indicated by this dotted line.
Careful sizing of text frames can go a long way to creating a design that will continue to work well even when line breaks, and thus text frame heights change.
Grouping Has Consequences
As part of the output process, Muse collections the objects you've drawn into a hierarchy of horizontal groupings, vertical groupings, or stacks. When line breaks change in different browsers and text frames change height, when the text frames are located in this output heirarchy determines what impact the change in height has on other objects (if any).
For example, if you have a layout that looks like a 2x2 grid of text frames, by default Muse will interpret it to act as two colums. So if the first text frame gets taller it will push the text frame below it down, but won't impact the location of the two text frames in the second column.
If that's not the behavior you want, the way to tell Muse to treat things differently would be to group the two items in the first "row". This would cause the top to to be treated as a horizontal group. If anything in the group grows taller than the group, the group resizes taller and pushes the objects below it down. Thus if the top to items are grouped, if either one of them grows taller than the group it would push both the text frames below downward.
The 2x2 grid is just a simple example of the concept. In most cases you don't have to do anything special to get the behavior you want, but it is important to understand grouping has this ramification. Grouping an arbitrary set of objects on your page can result in undesired behavior when text frames resize in the browser.
For the Andriod screenshot you've provided, I don't have an immediate explanation. For us to explain what's shown we need to know the exact browser, browser version, Android version and device the screenshot is for. It would also be immensely helpful to have the URL for the page, so we can attempt to reproduce what you're seeing and view the exact code involved.

Mid 2013 Macbook Air serious wifi issues

Okay, so I am basically turning to these forums because I am out of options at this point and am seriously considering selling my Macbook Air. I have a mid-2013 Mabook Air. My Macbook has been an incredibly dependable and efficient laptop until around late August time of 2014. I started having minor wifi connectivity issues (before Yosemite was even out). The problems started with random wifi dropouts, I would get an "icmp timeout" error. I tried dozens upon dozens of fixes for it, from resetting preferences and configurations in the Mac terminal before bootup, deleting the keychain, preferences, I even bought a new freaking wireless router and modem for over $300 bucks. My problems only got WORSE.
My problems still persisted. I moved on to the Yosemite install. Now this past month or two, my Macbook in terms of wifi has become utterly useless. The other night I tried playing my Macbook and it would just constantly disconnect from the wifi. Today I thought I would try reinstalling the operating system and wiping the hard drive. I am in a brand new installation of Yosemite. Now I can't connect to my router at all, I just get a "connection timeout" error" when trying to connect.
Let me say I am an IT professional now and I have tried EVERYTHING in my knowledge of computers to fix the connection problems on this ridiculous laptop. I scoured these forums for hours, tried tons of solutions and suggestions on the web. Below is a complete list:
1) changed system settings and files, basically all the stupid things, the keychain, I've changed settings in terminal, I've reset the cache, I even reinstalled Yosemite entirely while wiping the hard drive, I thought a fresh OSX install would fix any potential system file errors or corrupted areas, guess I was wrong
2) The macbook is not near any other wireless devices and is only 15 feet away from the router
3) I've tried multiple wifi channels and spectrums on my router and even bought a new router and modem with updated firmware which did not fix the problem
4) Tried turning bluetooth off, didn't do crap
5) Nothing else on my network has problems on wifi, and I can turn everything else off and this Macbook will still NOT connect to the wifi
<Edited by Host>

I have seen lots of issues on Yosemite with Wifi (and have been having issues myself), but yours seem different. It is a pretty new computer, have you tried taking it in under Applecare (if you live somewhere this is convenient)? Maybe you just got a defective wifi card. I won't defend Apple over this wifi mess, because it really is terrible, but your issue seems not the same as the ones I've read about while researching how to fix mine (unsucessfully....).

N95 - Utterly Useless !!!

Similar Messages

Maybe you are looking for