N97 web connnection problems

Hi Folks, My N97 has developed a problem when connecting to the web, it always wants to connect via wlan point, this is ok but some time i want to connect to my provider when i am not in wlan range, but it always goes to the wlan search then cant connect ? I am using the latest firmware, and have all destinations set to connect after confirmation (does not happen) so folks can anyone please point me in the right direction to try and find what iI am doing wrong. (p.s. I have also tried moving the "priority" list to no avail also.
Thanks...........

Similar Messages

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

N97 Wi-Fi Problems

I have just received my N97, and was wondering if anybody would kindly help with the following problem:
My N97 connects, no problem, to my home network, using wi-fi, however, if i attempt to open, any of the pre-installed apps ( i-player, Facebook etc) the N97 automatically attempts to connect via gprs.
I cannot find any settings, that allow me to change the app settings.
Please help.
Thanks.

Check this out.
Under Connectivity you will find a folder named "Destinations" where you will be able to setup multiple access points under one connections point. i.e mine defaults to a Connection point named "Internet" where I have 3 access points
WLAN
Orange Internet
Orange Java
I have prioritized em in that order so when my WLAN is out of range the phone should automatically search for the next priority access point in this case Orange Internet and if that ain't available then it should search for and connect to Orange Java.
After you set this up make make it your default access point for your browser and every other app that allows you to define an access point.
Hope this helps I'd advise you to download the User guide and read the whole "Connectivity" Chapter to fully understand this.
you can it here
http://europe.nokia.com/get-support-and-software/product-support/n97/guides
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

Urgent web service problem. can not find url of WSDL

Hi all,
I met a web service problem recently.
1 I have set up a web service and reside it on Java System Application server9.0. But there's a bug of this web server, which will stop after the user log off the server. I have installed the Application server as a windows service. It suppose to run all the time. I don't know why the server stop after I log off.
2 For that reason, I tried to migrant my web service from the java application server to Tomcat5.5. I deployed my web service to folder webApps. But I don't know the WSDL url of the web service, which is the web reference for my frent-end c#.net application.
Anybody can give me some idea?
Many thanks

Nobody knows?
Please help me

InterMedia Web Agent problems...

I have Oracle 8.1.5 and OAS 4.0.8 on an NT machine. I have installed interMedia Web Agent, having shut the OAS services down first, configured the application as described in the doc and restarted all services. I have one listener for OAS on port 90. When I try to access http://servername:90/intermedia/~admin I get a 'Page cannot be displayed' error. Why?
I have checked all the settings within OAS and they look fine. NT is running SP5. I can access http://servername:90/ fine.
Any help gratefully received!
Lee

The interMedia web agent is installed in the
OAS home and you can see the intermedia application and cartridge in the OAS admin page?
Have you checked the OAS wrb.log file? That is where errors should be displayed. If it is a web agent problem, check <windows_dir>wsclstch.err or log files in <OAS_HOME>/ord/web/logs.
What do they say about starting the agent?
Test the agent with http://host:port/intermedia/~test
Larry

Web.xml problem in Enterprise Manager 10g

I got an error while deploying to Enterprise Manager 10g
My platform: Windows XP
OC4J 9.0.4
Enterprise Manager 10g
And I even have the web.xml in the correct directory. i.e
cpd.ear
./META-INF/application.xml
./cpd-ejb.jar/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/web.xml
./cpd-webapp.war/WEB-INF/classes
The error I get while deploying on a Enterprise Manager 10g is:
Invalid J2EE application file specified - Jar file: :\WINNT\TEMP\jar47575.tmp is missing its standard xml descriptor located at WEB-INF/web.xml
Incidently the *.ear file built by my fellow's machine is deploying perfectly. I've compared the directories n useful files of both the *.ears down to the very last bit n they are the same.
I can imagine that guys with only high IQ can solve this mystery

The above message is a duplicate of another message by Sim.
web.xml problem in Enterprise Manager 10g

Unable to Download Reader - Web Site Problem

I cannot download Reader due to a serious Adobe Web Site problem.
When I go to -
http://www.adobe.com/uk/
and select "download reader" - I get sent to
http://get.adobe.com/uk/reader/
I then click on "install now" - and I get sent to
http://www.adobe.com/uk/
AND SO IT GOES ON AND ON IN CIRCLES.
I require the circle breaking so I can download a copy of the Reader software.
Message was edited by: wychegnome

I have run Regedit and found two instances of z:rc204D Content\iPad Media\Pictures in keys My Pictures
These were in
HKEY_CURRENT_USER\Software\Microsoft\Windows\Explorer\Shell Folders
and
HKEY_CURRENT_USER\Software\Microsoft\Windows\Explorer\User Shell Folders
Redirecting these to the default MY PICTURES on the c: drive has allowed the installer to run and almost complete the process to the point of installing the files and putting an icon on the desktop.
It now whinges with Error 1923. Service Acrobat Update Service (AdobeARMService) could not be installed. Verify that you have sufficient privileges to install system services.
I am the only user of the computer and DO have full privileges. I get the same response when I run the installer program as An Administrator.
What else does it require to allow it to install properly?

WRV210 web administration problem

I have a Wireless G VPN Router with Range booster, it was configured for a classroom by someone who left the company, and now i have to recover administration without resetting configuration or flashing the firmware. This because i need to configure 200 more devices with the same problem.
All i want is to see the web page of this device properly.
Belive me i have tried every option Internet Explorer 7 on windows 7, Internet Explorer from Windows XP, Firefox 6, Google-Chroome.
All with the last version of Java Runtime Environment, the resulting page is always the same.

I tried accesing with the cd, and magicly the web page worked fine once more
and then back to the broken page.
At least i got to recover the web access once.
2011/8/28 gstefanick
Cisco Support Community Re: WRV210 web administration problem created by George
Stefanick in *Getting
Started with Wireless* - View the full discussion

N97 Web browser

There is some major work needed on the N97 web browser. iTouch is so much easier to use. Enlarge/shrink, Seems iTouch displays the inital screen larger format to make it easier to read.
Besides that, my question is I saw on OVI the Opera browser, but when I clicked the link it said it was gone. Do you know if its coming back, a mistake or do we have to wait for the FireFox version?

1. Firstly...a rebooting of the phone will fix most "lock-ups".
2. At present I have not found anyone who has been able to change the default web browser, though there should be a method (see "Settings->Phone->Application sett.->Default apps.->Browsing internet" ). The OS probably requires that any other internet browser that you install (such as Opera Mini) register itself so that it appears in the selection list when you select the above setting. At present mine only displays "Web" though I do have Opera Mini installed.
3. I don't know of any other browsers available other than Opera Mini and Skyfire. I doubt though that any new browser will be able to install on download--the built-in browser is TOO integrated into the OS.
UPDATE: found another browser by Digia for the N97/5800 it is currently in Beta but is getting good reviews.
http://www.allaboutsymbian.com/news/item/10230_Digias_Web_browser_now_availab.php
Message Edited by rdcinhou on 11-Sep-2009 06:03 AM
Message Edited by rdcinhou on 11-Sep-2009 06:16 AM

Typekit Web font problem - only in PC browers

Hi. We have developed a site in Muse using a particular font from Typekit. The font in question is 'Quicksand'.
When we publish the site onto BC for viewing, on a Mac (Safari & Chrome browsers) the font shows fine, and on iPhone/iPad too. When we view it on a PC (IE8, Chrome, Firefox) it is either very feint (Chrome) or almost totally illegible and distorted (IE8 & Firefox).
We changed the font to another from Typekit on one particular page and the problem was solved.
Not fancying changing all the text, menus etc etc on the whole site, any ideas what could cause one particular font to not work like this?
Many thanks
Nathan

I'm having the same Muse Web Font problem. Web Fonts are beautiful in Design Mode but when in Preview Mode they're a mess. When I publish they render like in Preview Mode, a mess. They display incorrectly when viewing on a PC from any browser I've tried: IE, Firefox, Safari, Chrome and Opera. They look great on my iPhone but I don't have another Mac OS device from which to view. This happens with ALL Web Fonts.
Please see samples: 1) Muse Design Mode. 2) Muse Preview Mode. 3) Firefox PC. 4) iPhone.
The text displayed in images 1 and 4 is crisp but in images 2 and 3 is pixelated and misshapen. Can someone explain what's causing this and offer a solution?
Thanks,
~Bob

Setting OF LD_LIBRARY_PATH AND WEB CACHE PROBLEM [SHOWING PREVIOUS PAGE ]

Dear Members,
I would request for help regarding setting of LD_LIBRARY_PATH in Oracle 11G Application server and web cache problem when any single text file edit and save the result should not be changed . it shows previous page result.
*1. Where to set LD_LIBRARY_PATH in Oracle11g Application Server (10.3.0) ? [ like in 9ias we set in opmn.xml . ] Where is opmn.xml file in oracle11g or which files contained LD_LIBRARY_PATH?*
*2. When we created program generated report it shows correct result after some changes in file and generate again it shows first means previous page result as it is not take changes in that file. Even we tried out side made one .text file and open edit and save. It's given same result. So What is the problem regarding it?*
It is the matter of Browser Cache or WEB Cache. Where is the settings of it?
*3. How to connect database (oracle11g Release 2) through OCI driver?*
Regards
Vipul Patel

If you're compiling it yourself, you should set the library path then. If not, you can try something like this:
env DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:/path/to/add-on-libraries orca ...
but I'm not sure it will work.

Php web site problem - after loding the web site blank white page

Hi Guys
i've set up Mac server with 10.6.2 its running 3 web sites . the problem is when i upload the web files in to my Mac server and start to browsing from my laptop via internet, web site is not loading. So i upload the sample web page just as a simple html file. its working fine , But when i upload this php web site problem agin . problem : site is loading from loading bar, But i can not see anything from browser just white page , no page source nothing ......
any suggestions ?

This is the Error from Server Admin
ing: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 184
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 184
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 193
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 217
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 226
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function eregi() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 188
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 189
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 56
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-onl ine.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 47
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-off line.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 52
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-online.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 57
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-offline.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 62
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:57:23 2010] [notice] caught SIGTERM, shutting down
[Mon Apr 12 14:57:56 2010] [warn] module php5_module is already loaded, skipping
[Mon Apr 12 14:57:57 2010] [notice] Apache/2.2.13 (Unix) PHP/5.3.0 configured -- resuming normal operations
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5

N97 Bugs ant problems...

Dear forum members...
I have been used N97 RM505 for couple of months.
I bought it brand new with 3 generations old fw.
My problems with the phone started then! Very disappointing and embarrassing for Nokia, to be honest.
Since I consider myself "power user", I have never had smartphone or pocket PC so I could use it as phone or music player. I have always wanted to use phone as mobile computer so I aimed hi-tech products (7-8 years ago) from manufacturers like HTC, HP...half year ago I fell in love with Nokia E71 smartphone, and that was my first Symbian powered gadget. I was very interested in how "symbians" do it. And I was surprised how it worked. But, I wanted more. I gave E71 as present and decided to go for N97, flagship Nokia device.
And then, problems started to show up...
3 FW updates from that moment, and problems I have with this...device..do not disappear!
Same things happen all over again!
I read about particular issues and there are many of them, that's for sure.
My problem is simple: I have all of them!
Main camera works from time to time, after I answer the call I cant unlock the phone, freezes during boot sequence, left side of display in landscape mode dissapears, phone "kind of soft-restarts" every day or two and after that I have to reconfigure my email settings all over again, speed dial and favorite contacts lose pictures, contacts or group assigned ringtones mess up...
Phone has to be rebooted using "battery-pulled-out" method at least 3 times a day!
Tried everything: formatting, reinstalling device's FW, hard-resetting, FW upgrading...
Every time I format memory or hard-reset the phone i hope that will be last time!
But, nothing happens. Phone works well for a couple of hours. Phone call and it gets stuck, and i start all over again...when I come home.
I work as industrial automation software developer and, believe me, i know what "faulty device" means.
I know Nokia's origins, and I know that Finland is cradle of mobile communications, I have visited couple of companies in Finland that produce very reliable digital radio devices and I am familiar how professional they are up there...Every bug I have found in devices produced and developed in Finland was reported and problems were solved in couple of weeks or so! This does not fit in my experience with Nokia. E71 is outstanding device. I am sorry because I switched it for this "flagship phone" or, even worse, "mobile computer".
Bottom line:
Phone is not reliable, especially if you want to use it as multipurpose device!
Calling this device "Nokia flagship phone" is very wrong.
I am gonna wait for couple of weeks for new FW since it is not still available for rm505 officially, and after that I'll do something bad with this phone.
Technical support in my country is more than "unprofessional" and problem solving does not consist of turning off and turning on the phone or continuous reinstalling FW, as they do it.
My Question: Anything similar happened to anybody, and what I should do?
Thanks for advices. Forget technical support or local repair centre.
Cheers!

Yeah...
Thanks for the tips, carman58. I have already managed to try all different combinations and procedures for getting my phone to work including your recommendations.
As I told you before...after formatting E-drive, reinstalling phone software and hard resetting things went pretty well...until something happens. Week or two...day or two of heavy usage and I can't unlock device after phone call...Or main camera fails. Or, sometimes I just can't turn it on. White screen and stuff like that. 3-4 days before I decided to post on this forum I conducted procedure similar to the one recommended by carman58. I tried to conclude "critical amount of free space on C drive" that affects phone's stability. Phone works well (but I want it to work better than that) with 40-50 MB of free space on C drive. Anything below that level does not guarantee your phone will work well. Memory allocation may be the key...Not my job, just trying to conclude something logical.
I am not fan of third party software that watches RAM or CPU usage...Bad experience with Windows mobile devices, but I'll try to see somehow if there's not enough memory when s**t happen.
And, yes...There are some apps that definitely do not free allocated memory after program is closed or even crashed. I am not going to name these apps, just want to know forum members experience with remote desktop management software compatible with N97. Hahaha!...In ths very moment I found out that my phone is not charging although it is connected to the charger! Never mind...Maybe notification does not work.
Is there Nokia's official explanation for problems with N97? They can't deny problems. I mean, if you are not heavy user, or power-user....whatever....maybe you won't have problems we are dealing with?
And then, what's the point of 400MHz cpu clock, and great amount of RAM? It is there so we can watch video clips, take pictures, or surf the web? Yes but not all of that at the same time...
Multitasking is what devices like N97 should eat for lunch, if you know what I mean. Memory management should not be like this...3rd party apps for monitoring and flushing RAM. No way.
I know how hard it is to develop device that has all of these functions N97 has. So many hardware modules in such small housing, powered by such small power source...That's hell of a job!
If it is true, then my device should still have "beta" somewhere around "N97". I am not going to mention how much money N97 costs...
Bugs antS problems...

N97 web connnection problems

Similar Messages

Maybe you are looking for