Namespace appear after i send using B2B-BPEL adapter

Hi All,
i have a case here:
i have a PIP 4B2 that i remove all the Namespace declaration using BPEL PM and send to Oracle B2B using B2B-BPEL Adapter.
the PIP successfully send out but when receive at another end, the namespace appear again.
anyway to make sure that the namespace wont appear??
thanks
kin wah

hi ramesh,
finally i got time to test.
i tried both way , using B2B Adapter and AQ but the result is still the same.
let me show you this is the my payload from BPEL after my transformation
<Pip4B2ShipmentReceiptNotification><fromRole><PartnerRoleDescription><ContactInformation><contactName><FreeFormText>DUMMY </FreeFormText></contactName><EmailAddress>DUMMY</EmailAddress><facsimileNumber><CommunicationsNumber>DUMMY</CommunicationsNumber>
but after go into Oracle B2B, it become like this
<?xml version="1.0" ?><Pip4B2ShipmentReceiptNotification xmlns="http://www.edifecs.com/RosettaNet/100"><fromRole xmlns=""><PartnerRoleDescription><ContactInformation><contactName><FreeFormText>DUMMY </FreeFormText></contactName><EmailAddress>DUMMY</EmailAddress><facsimileNumber><CommunicationsNumber>DUMMY</CommunicationsNumber>
please advice whether i should log SR for this matter.
thanks
kinwah

Similar Messages

B2B-BPEL Interoperability using b2b adapter

Hello All,
We have Oracle B2B 10.1.2.0.2 is installed over Mid Tier (J2EE & WebCache Application Server 10.1.2.0.2) on one machine. and SOA 10.1.3.0 installed on another machine.
Now we need to configure B2B-BPEL adapter in SOA suite. For this we have followed the steps mentioned in Readme.txt file of $ORACLE_MIDTIER_HOME\ip\install\B2B-BPEL.zip and after giving correct hostname, port, sid and b2b schema password the process is completed successfully.
But we still dont see any b2b folder in wsil browser while creating partner link in bpel.
Please assist us to resolve this issue.
Thanks in advance
Hitesh
Edited by: HiteshKumar on Nov 11, 2009 4:04 AM

Hi Anuj,
Thanks for the important documentations..
I have already followed the instructions mentioned in setting up B2B adapter in WSIF browser through BPEL developers prompt but still i cant see any b2b adapter option while creation Partner Links in JDev.
I have installed Oracle Application Server 10.1.2.0.2 J2EE and Web Cache Type and B2B resides on it.
Do i need to upgrade this Application Server by the patch and MLR you suggested because b2b installation over this Application Server ???
I tried another option of sending documents to B2B through BPEL ie. using AQ adapters but i have couple of queries
1. while enqueuing documents to IP_OUT_QUEUE , how do we populate the parameters of Header and IP_Message_Type ??
2. What value should be assigned to payload parameter of IP_MESSAGE_TYPE ?
3. while defining the XSD for Purchase Order EDI files, I select the 850.xsd in which i see no root element but multiple composite elements along with TransactionSet element. Which element should I select for defining the XSD ??
Kindly help me clearing the above doubts .
Thanks & Regards
Hitesh

Issue in B2B-BPEL configuration

Hi,
Problem: Not able to configure B2B-BPEL plugin for BPEL PM for B2B.
Background:
I am using soa suite 10.1.3.1 and B2B server 10.1.2.02. After going through B2B user guide docs and Bpel docs, i have tried to configure B2B-BPEL zip file which comes with B2B installation inside BPEL server but in vain. It seems there is some problem with build.xml which comes with zip file. I have tried to modify contents of the same and build it but no output.
Can anyone please tell me how to configure soa suite bpel/esb server with B2B repository using B2B-BPEL zip file or if there is any other procedure plz let me know. After installing the same I should be able to get all the deployed ones under B2B inside WSIL browser of JDeveloper. But Im not able to.
Regards,

Hi,
you can publish data to B2B internal delivery channel by configuring AQ adapter in BPEL/ESB.
Please refer this document for ESB : http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_028_ESB_B2B_Interop.pdf
If you want to enable WSIL browser, you need to apply patch 5105622 for more information refer this link
Re: BPEL-B2B integration
Edited by: RameshT on Mar 27, 2009 2:41 AM

B2B Add on - Party configuration using B2B - AS2 Aadapter

Can anyone help me to configure Party using B2B AS2 Adapter .
I tried configuring the channel using Party passing the Sender ID . Getting this error.
Cannot get channel binding: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=67140c68525433f4a8468af588477d5e;

Hi Mithali,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?QuickLink=index&…
Under Sender Agency; put <your Business Service / System / Comm. Comp name>; example XID_112 or whatever
Under Sender Schema; put ALE#KU; if your Partner type of Sender is KU in WE20
This combination will derive the sender Party.
Similarly you can put the receiver boxes if you want to de-normalise and derive the receive party name.
Let me know if it helps; else can help you more!!
Thanks
Saurabh

What do the 3 dots mean after I send a text message on my iPhone 4?

I dont understand if the 3 dots that appear after I send a message are saying that my message is sending or if the other person is replying when they appear?

3 dots means that they are responding to your message.

Getting different namespace in inbound XML message consumed by BPEL after translated from EDI to XML in B2B using Inbound Agreement

Hello B2B Gurus,
I am able to process B2B inbound files successfully from Trading Partner --> B2B --> BPEL. When it comes to BPEL i am not able to parse/transform the received XML as i am getting selection failures in assign and empty nodes in transformation. When i look at the input XML payload which i received in ReceiveB2BConsume Payload i observed that i am getting namespace as " xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" instead of actual namespace xmlns="urn:oracle:b2b:X12/V4010/856" which is in my XSD as well and i am getting the XML start tag <?xml version="1.0" encoding="UTF-8" ?> 2 times. :
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
<Transaction-856 xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" mlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2013-08-21T16:33:57" CreatedBy="XEngine_2956" GUID="{00C28978-0AA1-11E3-88B9-80C16E7DC6DA}">
<Internal-Properties>
</Transaction-856>
I went back and checked the XSD which i loaded in the B2B Console and i am having the following namespace
"<xsd:schema xmlns="urn:oracle:b2b:X12/V4010/856" targetNamespace="urn:oracle:b2b:X12/V4010/856" xmlns:xsd="http://www.w3.org/2001/XMLSchema" version="1.0" elementFormDefault="qualified">"
I am not sure why the XML translated from EDI in B2B console has the different namespace and XML start tag 2 times. Can you please help me resolve the issue. Let me know if i am missing anything.
Thanks in Advance..

Hi,
Please set property as b2b.setDynamicNameSpace=false.
To use EDI ecs and xsd files from Oracle B2B 10g version, set this property to true.
When using EDI ecs and xsd files in Oracle B2B 11g which were used in Oracle B2B 10g, the XEngine may generate dynamic namespace for the translated xml. For example,
xmlns="NS_31CA8D0F33324F95A0BF15D85539C27E20060518215520"
To turn off dynamic namespace generation for inbound EDI messages, set this property to false.
Thanks
Satendra Pare

Need to send XML msg to TP using B2B, but format should be Orcl XML Gateway

Current Interface:
==================
We have an EBS 11.5.10 with XML Gateway.
Actively we were exchanging XML data with 5 trading partners (different application maintained by 3rd party) using EBS XML Gateway.
XML Gateway uses OAG Format (attached the format bellow)
Future Interface:
=================
Our company is in process of moving our EBS 11.5.10 app to Oracle Fusion Apps.
Oracle Fusion app interfaces will be using Fusion Middleware and B2B.
For that we doing a POC interface between a Fusion MDM and 1 Trading Partner.
Problem:
========
But, when sending XML message to other TP using B2B, the format is different. i.e. Message in the XML Format.
Eg.
<?xml version="1.0" ?><OUTB_FUS_IND_DATA> <OUTB_FUS_IND TRANSACTION_TYPE="TP_INDIVIDUAL_OB" TRANSACTION_SUBTYPE="INDIVIDUAL.UPDATE"> <OUTB_FUS_IND KEYVALUE="100010058799220" PERSON_FIRST_NAME="Xyz" PERSON_LAST_NAME="Abc"/> </OUTB_FUS_IND></OUTB_FUS_IND_DATA>
Oracle XML Gateway send message with message envelop, which have attributes as text field and payload in the XML message format (XML Gateway envelope details is below).
(Sample XML messages goes out: HTTP Body
TRANSPORT_PROTOCOL=OXTA
TRANSPORT_PROTOCOL_VERSION=1.0
REQUEST_TYPE=SEND
MESSAGE_ID=A1234567890ZZ0987654321
MESSAGE_TYPE=XML
MESSAGE_STANDARD=OAG
TRANSACTION_TYPE=TP_INDIVIDUAL_IB
TRANSACTION_SUBTYPE=INDIVIDUAL.UPDATE
DOCUMENT_NUMBER=12345
PARTYID=9999
PARTY_SITE_ID=8888
PROTOCOL_TYPE=HTTPSu2013OXTA
PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
Therefore, when I receive the document in PI the mapping fails due to an incorrectly formed message payload. For example:
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&REQUEST_TYPE=SEND&MESSAGE_ID=9EA3BD2......
We want B2B send messages to other TP as same way XML gateway use to send.
How we solve this issue?
XML Gateway Envelope (Manual)
=====================
In addition to the business document such as a purchase order or invoice in the XML Payload, a set of message attributes are transmitted. Collectively, these attributes are called the XML Gateway envelope.
This section discusses the XML Gateway envelope and its data in the validation process for inbound messages, or its source of data for its creation for outbound messages. Data entered into the Trading Partner Setup form is referred to as data in the trading partner table. Data entered into the Define Transactions form is referred to as data in the transaction table.
Most of the data elements are copied from the Trading Partner tables or the Transaction tables to the XML Gateway envelope.
Attribute
=========
MESSAGE_TYPE
MESSAGE_STANDARD
TRANSACTION_TYPE
TRANSACTION_SUBTYPE
DOCUMENT_NUMBER
PARTYID
SOURCE_TP_LOCATION_CODE
PARTY_TYPE
PROTOCOL_TYPE
PROTOCOL_ADDRESS
USERNAME
PASSWORD
ATTRIBUTE1
ATTRIBUTE2
ATTRIBUTE3
ATTRIBUTE4
ATTRIBUTE5
PAYLOAD

First of all EBiz and B2B/BPEL are two different products meant for different purpose and hence you cannot expect that EBiz and B2B/BPEL should have same functionality.
Whatever headers you have mentioned, those are added by OXTA (Oracle Transport Agent) which is part of EBiz. You can add almost all these headers in Oracle B2B in "Additional transport headers" section of Transport Protocol Parameter.
Search for "Additional transport headers" at below link -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/b2b_tps.htm#BABBCDHI
Regards,
Anuj

How BPEL find namespace alias to use in .bpel and payload-body.jsp?

Hi,
We are having many issues about the namespace alias for XML schema while designing BPEL proces and the payload-body.jsp. Could you please suggest us how to control the namespace alias for both cases?
Thank you very much,
Nidjarin

I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
If I create a process which start with database table polling, then I cannot use the java embedding.
try this:
- create BPEL empty project
- drop a database adapter service and follow the wizard:
- select a connection (I tried both oracle or sqlserver connection)
- select "poll for new or changed record"
- select any table empty or with few record inside (1 or 2)
- press next 4 times
- chose delete record after read (press next)
- chose order by "no ordering" in polling options (press next 2 times)
- now drop a receive activity on the process, and connect with the polling partner link
- drop a java embedding and write any valid java statement
- deploy; if the table is empty, write a recod in the table
- the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.

TS4083 When I send an email using iCloud Mail, it does not appear in the send box.

When I send an email using iCloud Mail, it does't appear in the send box. Not in icloud, nor on any other devices. Any idea why not?

not all mail providers sync the send mail part of the mail box
you can try to contact yahoo if this is the case with them

How to create an excel report and send it via email using a BPEL process ?

Hi Experts,
I have a requirement to develop a xl report based the data in the DB table. I will have to query the list of records entered / processed during previous day, generated the xl based report and send to users via email.
I talked to one the experts, he asked me to use the following Adapter and BPEL activities to accomplish it.
DBAdapter --> {BPEL process} --> Java Embedding --> Email Activity.
Can someone please help me to pass the information retrieved by DBAdapter to Java Embedding and then to email import? I have created DBAdapter and Java Embedding. I don't know, how to retrieve the data read / sent by DBAdapter using Java Embedding. Also please help me to pass the xl attachment to Email Activity.
Thanks for your help in advance!
Thanks,
Harisudhan Selvaraj

I would suggest something like:
DBAdapter --> Bpel Process --> File Adapter --> write file to location (you can write in csv which can be imported into xls)
Read Location --> FileAdapter --> Bpel Process --> Email Activity
Regards,
Anshul

Small white square appears after using "Preferences" under the Apple sign. It is on top of approx 3 app tabs which cannot be used.

Using Mac version of FF ver 4. A small white rectangle appears under the Apple sign covering 3 app tabs after selecting and using Preferences. The rectangle is on top of the tabs so the tabs cannot be selected.

No-one replied

I bought iphone4 in china, and it broken when I was in USA. After I sending to your company. You send me a new phone, but this phone is locked phone. I can't use it. Because my sim card is from china

I bought iphone4 in china, the ss number is 82044JAVA4S, and it broken when I was in USA. After I sending to your company. You send me a new phone, but this phone is locked phone. I can't use it. Because my sim card is from china, so I think you shoulu give me a unlocked one.

I understand your frustration.
Fortunately for you, you can make your new phone to work; but to do so, you have to call your Chineese carrier and give them the IMEI number found on the SIM card of your iPhone.
They will then activate it and you will be able to use it.
It's NOT a matter of locked/unloked phone; it's a matter of activating (pairing) a SIM card with a phone !
Just call you Chineese carrier and have them register your SIM card with your new iPhone and you will be back in Business !

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Can you give me some idea why Temperature Need to cool down before you can use it. as this appears after 5min using.

Dear Sir/Madam,
My questions:
Why Temperature appears and ipad need to cool down after 5m of using and not even hot. The guy from the apple store where i bought my Ipad2 told me that the motherboard need to be replaced. Ca you help me and give me some idea on how much it cause of the motherboard.
Thank you
Victoria

if you need a new logic board for you iPad 2 i am sure the cost will be about 50% of what you paid for the iPad 2 $249.00, Take a look at this link, http://www.apple.com/support/contact/

Namespace appear after i send using B2B-BPEL adapter

Similar Messages

Maybe you are looking for