Native Process works OK in FlashBuilder 4.6 'run' but won't export build

Hi,
I have a small application that uses the 'native process' feature to invoke Image Magick to process an image file. My environment is Widows 7/64 bit.
The application runs perfectly within FlashBuilder 4.6 using the 'run' facility and with 'supported profiles' set to 'extendedDesktop' in the -app.xml file.
But when I try to export-build it, I get an error message (306) listing the supported profiles but extendedDesktop is not one of them.
I have also tried to package this using the native Flex 4.6 SDK but the same error occurs.
If I add 'desktop' to the supported profiles, the application will export build, and then allows the creation of the exe from the air file.
But the exe will not run and just 'hangs' once you get to the point where the native proessing is invoked.
The native process documentation says that extendedDesktop is required so the application using 'desktop' perhaps understandably 'hangs'.
Any assistance with this will be most appreciated.

OK, found the problem - I need to export-build the app as 'signed native installer' not 'signed AIR package'.
Thanks to the answer to a similar problem in this forum from 2010.

Similar Messages

Firefox 4 would not work. I uninstalled and reinstalled. Wouldn't work. Uninstalled and went back to 3.6. Won't work or uninstall. Says its running but it isn't. Cannot unistall or make it work. What do I do?

After I upgraded to Firefox 4 nothing worked very well. It was slow, crashed a lot and froze, so I uninstalled and downloaded and installed again but then it wouldn't work at all. So uninstalled again. I decided to try 3.6 again as it worked well before , but now it won't work. I can't uninstall because it says Firefox is running and to close it but I have nothing open so how do I close something that isn't open? Never had trouble with Firefox but I'm about done with it. Please advise as to how to fix this. Firefox was in safe mode then it wasn't. What a mess.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

I purchased an adapter for playing videos from my ipod touch on my tv. It works fine for episodes I have purchased from Itunes, but won't play videos from Hulu Plus. What should I do to remedy the situation? Thank you!

I purchased an adapter for playing videos from my ipod touch on my tv. It works fine for videos I have purchased but won't allow me to watch videos from Hulu Plus. What should I do to remedy the situation? Thanks!

The iPod TV out only works for aps that support TV out. The description of Hulu Plus only states that iiPad supports HDMI video out (SD only)

Disp+work goes yellow with message: running but dialog queue standstill

I just installed CRM 7.0 on Windows with MaxDB 7.7.04 build 28. After the installation I was able to logon and begin applying support packs. In the middle of doing this, the system hung and I noticed the disp+work went yellow with the message "Running but dialog queue standstill". I shut down the system, rebooted the machine and started up again. The same error is occuring. Here are some log files:
adatmp:
Error! Connection failed to node sitaserv23 for database CRE:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\CRE.dbm.shi, requested size 2600
stderr1:
C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
C:\usr\sap\CRE\DVEBMGS02\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" db_state 1>adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "ONLINE" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" dbm_version VERSION 1>adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.2" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.3" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.4" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.5" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.6" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.7" adatmp
Error: Database CRE NOT started !
I tried applying note 1041650 but this seems to be for UNIX. I don't know how to clear memory in Windows 2003 server.
I updated the kernel to 117 with disp+work at 130. Still the same.
Please help.
Thanks,
Peggy

Here is the result
db_state
OK
ONLINE
x_cons <SID> sh ac
SERVERDB: CRE
ID   UKT Win   TASK       APPL Current         Timeout Region     Wait
          tid   type        pid state          priority cnt try    item
T113   8 0x8F0 User        956 LOG FULL (246) !      0 0               11514(s)
So I can see that it is full. What can I do to increase the size and/or turn off logging?
Thanks!

Disp+work goes yellow with: Running but dialog queue standstill

I just installed CRM 7.0 on Windows with MaxDB 7.7.04 build 28. After the installation I was able to logon and begin applying support packs. In the middle of doing this, the system hung and I noticed the disp+work went yellow with the message "Running but dialog queue standstill". I shut down the system, rebooted the machine and started up again. The same error is occuring. Here are some log files:
adatmp:
Error! Connection failed to node sitaserv23 for database CRE:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\CRE.dbm.shi, requested size 2600
stderr1:
C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
C:\usr\sap\CRE\DVEBMGS02\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" db_state 1>adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "ONLINE" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" dbm_version VERSION 1>adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.2" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.3" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.4" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.5" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.6" adatmp
C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.7" adatmp
Error: Database CRE NOT started !
I tried applying note 1041650 but this seems to be for UNIX. I don't know how to clear memory in Windows 2003 server.
I updated the kernel to 117 with disp+work at 130. Still the same.
Please help.
Thanks,
Peggy

Hi,
Its better to put log archive in over write mode while installation to avoid these issues.
Regards,
Sahil Garg

Native Process calling TabTip.exe not working on Windows 8

Hey,
I'm desperately trying to get the nice Touch Keyboard to display on Windows 8 for my AIR App.
Looking at this article http://sukantadas.wordpress.com/2012/10/16/executing-exe-file-from-desktop-through-adobe-a ir/ it seems possible, and it works nicely on my windows 7 machine, beit that TabTip.exe is a slightly different keyboard on Win7.
Over to windows 8, I can't get it to work for love nor money. ('m testing on this http://www.samsung.com/us/business/computing/tablet-pcs/XE700T1C-A03US).
It works fine if I wrapp the SWF with MDM.ZINC - Mdm.System.exec("C:\\Program Files\\Common Files\\microsoft shared\\ink\\TabTip.exe"); but then I'm out of the AIR SDK and stuck with MDM Zinc; which doesn't even recognise MouseDown events on Windows 8 (touching the screen).. but that's another story - http://www.mdmforum.com/forum/index.php?showtopic=29963
Please can someone help me as I've been pulling my hair out..

I lost my password to respond.
Thanks for helping me out. I found out how to do it in ASP.net though. I use the app for native process because I was having some huge issues with AIR.
Thanks again
My code below. I took into account Windows 8
Imports System.Threading
Imports System.Runtime.InteropServices
Module Module1
    Sub Main(ByVal sArgs As String())
        If sArgs.Length = 0 Then
            Console.WriteLine("<-no arguments passed->")
        Else
            Dim i As Integer = 0
            If i < sArgs.Length Then
                If sArgs(i) = "1" Then
If My.Computer.FileSystem.FileExists("C:\Program Files\Common Files\Microsoft Shared\ink\TabTip.exe") Then
      Process.Start("C:\Program Files\Common Files\Microsoft Shared\ink\TabTip.exe")
Else
      Process.Start("c:/windows/system32/osk.exe")
End If
                ElseIf sArgs(i) = "0" Then
                    Dim TouchhWnd As New IntPtr(0)
                    Dim hWnd As New IntPtr(0)
                    TouchhWnd = FindWindow("IPTip_Main_Window", Nothing)
                    PostMessage(TouchhWnd, WM_SYSCOMMAND, SC_CLOSE, 0)
                End If
            End If
        End If
    End Sub
    Dim WM_SYSCOMMAND As Int32 = 274
    Dim SC_CLOSE As UInt32 = 61536
    <DllImport("user32.dll", SetLastError:=True, CharSet:=CharSet.Auto)> _
    Private Function PostMessage(ByVal hWnd As IntPtr, ByVal Msg As UInteger, ByVal wParam As IntPtr, ByVal lParam As IntPtr) As Boolean
    End Function
    <DllImport("user32.dll", SetLastError:=True, CharSet:=CharSet.Auto)> _
    Private Function FindWindow(ByVal lpClassName As String, ByVal lpWindowName As String) As IntPtr
    End Function
End Module

Problem with blocked native processes

My application relies heavily on native processes so that I am trying to implement fallback strategies if a native process doesn't work as expected.
While creating test scenarios I had a problem with handling errors caused directly by the start() method of the NativeProcess class. It throws errors if the target process can’t be accessed or is corrupted. For example if you take an exe file in Windows that works correctly and modify it in a hex editor to corrupt it the following error is thrown:
Error: Error #3219: The NativeProcess could not be started. '%1 is not a valid Win32 application.'
      at flash.desktop::NativeProcess/internalStart()
      at flash.desktop::NativeProcess/start()
If I try to put a try-catch block around the process.start() call something unexpected happens:
The error is cought correctly, but another error is thrown instantly:
Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
      at mx.managers.layoutClasses::PriorityQueue/removeSmallest()[E:\dev\4.x\frameworks\projects\ framework\src\mx\managers\layoutClasses\PriorityQueue.as:238]
      at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\ src\mx\managers\LayoutManager.as:567]
      at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:730]
      at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
The problem with this error is that I got no idea how to catch or prevent it. Depending on what I do in the catch block there is another error. For example if I try to log the error I get (but sometimes not as instantly as above):
Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
      at mx.logging::Log$/getLogger()[E:\dev\4.x\frameworks\projects\framework\src\mx\logging\Log. as:360]
Strange is that the error is fired instantly sometimes not after 30 seconds.
How can I fix this?

In the first case I used a loader to load an error image. In the second case I tried something like:
var logger:ILogger = Log.getLogger("Test");
logger.error("NativeProcessError");
I don't have the exact code at the moment, because I'm not on that computer.

Native process execution problem in mac os

hi,
     In my flex application i have to get mac serial number as a unique id for each system . On searching i got one terminal command to get serial number. For that i have run terminal command through flex native process. I have set supportedprofile as <supportedProfiles>extendedDesktop desktop</supportedProfiles> in app xml. But when i install and run application on mac terminal is getting opened but command is not executing. I couldn't trace out the problem. I could execute cmd in windows and that worked . Please help me to findout a solution................... The test code is adding below
private var process:NativeProcess
=
new NativeProcess();
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                // TODO Auto-generated method stub
                if(NativeProcess.isSupported) {
                    Alert.show("Yes NativeProcess");
                    process.addEventListener(ProgressEvent.STANDARD_OUTPUT_DATA, onOutput);
                    process.addEventListener(ProgressEvent.STANDARD_ERROR_DATA, onIOError);
                    process.addEventListener(IOErrorEvent.STANDARD_OUTPUT_IO_ERROR, onIOError);
                    process.addEventListener(IOErrorEvent.STANDARD_ERROR_IO_ERROR, onIOError);
                    process.addEventListener(NativeProcessExitEvent.EXIT,onIOError);
                    var info:NativeProcessStartupInfo     =     new NativeProcessStartupInfo();
                    info.executable                               =     new File("/Applications/Utilities/Terminal.app/Contents/MacOS/Terminal");
                     /* var startupArgs:Vector.<String>    =     new Vector.<String>();
                         startupArgs[0]                              =    'system_profiler |grep "r (system)" ';
                         info.arguments                              =    startupArgs;*/
                    //Alert.show(String(info.arguments.length));
                     process.start(info);
                    process.standardInput.writeUTFBytes('system_profiler |grep "r (system)" '+ "\n");
                }else
                    Alert.show("No");
            protected function onIOError(event:IOErrorEvent):void
                // TODO Auto-generated method stub
                Alert.show("Error");
            protected function onOutput(event:ProgressEvent):void
                var processID:String            =    process.standardOutput.readMultiByte(process.standardOutput.bytesAvailable,"");
                Alert.show("Path : " + processID );
I have tried to set arguments but didn't execute......
Message was edited by: aswathykrishnan

Hello Aswathy, these days I'm also coding an application which uses AIR NativeProcess and I required to open the MacOS terminal with some parameter/commands. I also eventually turn to the AppleScript, but I considerably new to the AppleScript, yet trying to findout a way to passing parameters (the command argument) to the AppleScript; the appleScript I managed to open but not passing the argument. Can you please help? here's my some probable codes for the application:
My appleScript is:
#!/bin/bash
on run argv
          tell application "Terminal"
                    set currentTab to (do script) & item 1 of argv
          end tell
end run
I've packaged the appleScript as an Application (Contract.app) and here's my Flex code:
var npInfo : NativeProcessStartupInfo = new NativeProcessStartupInfo();
npInfo.executable = new File( "/Applications/Contract.app/Contents/MacOS/applet" );
                              var arg:Vector.<String> = new Vector.<String>;
                                  arg[0]="ssh [email protected]";
                              npInfo.arguments = arg;
                              process = new NativeProcess();
process.start( npInfo );
Can you please help?
Thank you.

Launch App with Native Process

Hi,
I want to launch serproxy application (http://www.lspace.nildram.co.uk/freeware.html) using native process in adobe air. But it seems not working.
Here is my code:
protected function launchSerproxy():void{
    if(NativeProcess.isSupported){
     var serproxy:File = File.applicationDirectory;
     serproxy = serproxy.resolvePath("serproxy/serproxy.exe");
     var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
     nativeProcessStartupInfo.executable = serproxy;
     var process:NativeProcess = new NativeProcess();
     process.start(nativeProcessStartupInfo);
     // connect to the com port
     setTimeout(connect,1500,"127.0.0.1",5339);
Flex did not return any error or problem on runtime. What should I do to have Adobe Air load and run serproxy? Thanks.

I think you just missing the working directory.
"nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;"

Creating native processes

Hi,
Runing SuSE Linux 8.0, java 1.4.0
I'm trying to create a native shell (I/O dumped into a JTextArea) woith java, the problem is that once I have invoked bash, it somehow manages to work out that its not running in a real console and behaves as if my input was a script. I managed to get bash working properly with command line args, but now when I want to start other interpreters on top of it they too seem to detect they are not in a proper tty.
Is there a way to make native processes behave as if they were run from, say, an xterm?
my code follows:
file tests/ConsoleOnSteroids.java
/* File:    ConsoleOnSteroids.java
* created: 10/07/03
* author: dsm
package tests;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.PrintStream;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
* Defines a console that handles a native process
* @author    dsm
public class ConsoleOnSteroids extends JFrame {
    private ThreadedStreamReader out;
    private ThreadedStreamReader err;
    private PrintStream inp;
    private String processName;
    private JTextArea jta;
    private IOControl ioc;
    private JScrollPane jsp;
     * Constructor for the ConsoleOnSteroids object
     * @param name         The name of the frame
     * @param processName The name of the process to execute (like /bin/bash in UN*X systems)
    public ConsoleOnSteroids(String name, String processName) {
        super(name);
        this.processName = processName;
        this.jsp = new JScrollPane();
        this.jta = new JTextArea();
        try {
            this.ioc = new IOControl(Runtime.getRuntime().exec(this.processName));
            this.out = new ThreadedStreamReader(this.ioc.getStdout(), this.jta,
                this.processName + ":stdout");
            this.err = new ThreadedStreamReader(this.ioc.getStderr(), this.jta,
                this.processName + ":stderr");
            this.inp = this.ioc.getStdin();
        } catch(IOException ioe) {
            System.err.println("The process " + this.processName
                 + "could not be started due to an IOException:");
            ioe.printStackTrace();
            System.exit(1);
        this.jta.setEditable(false);
        this.jsp.setViewportView(jta);
        this.addListeners();
        this.getContentPane().add(jsp);
        //this.pack();
        this.setSize(600, 500);
        this.setLocation(100, 100);
        this.setVisible(true);
        this.out.start();
        this.err.start();
        //this.inp.println("ps -A");
        //this.inp.flush();
     * The main program for the ConsoleOnSteroids class
     * @param args The command line arguments
    public static void main(String[] args) {
        ConsoleOnSteroids cos = new ConsoleOnSteroids("Bash", "/bin/bash --login --noediting -i");
     * Adds necessary Listeners to the ConsoleOnSteroids object
    private void addListeners() {
        /* Window Listener... what happens when the window is closed */
        this.addWindowListener(
            new java.awt.event.WindowAdapter() {
                public void windowClosing(java.awt.event.WindowEvent evt) {
                    System.exit(0);
        this.jta.addKeyListener(
            new java.awt.event.KeyAdapter() {
                public void keyTyped(java.awt.event.KeyEvent evt) {
                    textBoxKeyTyped(evt);
     * Handles the typing of stuff in the text area
     * @param evt Description of Parameter
    private void textBoxKeyTyped(java.awt.event.KeyEvent evt) {
        jta.append(new String(new char[]{evt.getKeyChar()}));
        inp.print(evt.getKeyChar());
        inp.flush();
     * This private class takes a BufferedReader and a JEditorPane as parameters for the
     * constructor, and every time a line is avaliable on the reader, it appends it to the pane.
     * @author    dsm
    private class ThreadedStreamReader extends Thread {
        private BufferedReader reader;
        private JTextArea pane;
         * Constructor for the ThreadedStreamReader object
         * @param reader The reader to take input from
         * @param pane    The pane to dump the input in
         * @param name    The name of the thread
        public ThreadedStreamReader(BufferedReader reader, JTextArea pane, String name) {
            this.reader = reader;
            this.pane = pane;
            this.setName(name);
         * Main processing method for the ThreadedStreamReader object
        public void run() {
            while(ioc.isAlive()) {
                try {
                    char c;
                    int i;
                    if((i = reader.read()) != -1) {
                        c = (char) i;
                        pane.append("" + c);
                } catch(IOException ioe) {
                    System.err.println("Cannot read from " + this.getName() +
                        " because of an IOException:");
                    ioe.printStackTrace();
                    System.exit(2);
            System.exit(0);
}file tests/IOControl.java
/* File:    IOControl.java
* created: 10/07/03
* author: dsm
package tests;
import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.io.PrintStream;
* Controls the I/O for a process. When using the std[in|out|err] streams, they must all be put on
* different threads to avoid blocking!
* @author    dsm
public class IOControl extends Object {
    private Process process;
    private BufferedReader stdout;
    private BufferedReader stderr;
    private PrintStream stdin;
    private boolean alive;
     * Constructor for the IOControl object
     * @param process The process to control I/O for
    public IOControl(Process process) {
        this.process = process;
        final Process p = process;
        new Thread(
            new Runnable() {
                public void run() {
                    alive = true; // set the adequate flag for the process
                    try {
                        p.waitFor(); // wait for process to end interfacethis thread
                    } catch(InterruptedException ie) {
                        System.err.println("An error ocurred during the execution of the process");
                        ie.printStackTrace();
                    } finally {
                        alive = false; // the process has ended
            }).start();
        this.stdin = new PrintStream(process.getOutputStream());
        this.stdout = new BufferedReader(new InputStreamReader(process.getInputStream()));
        this.stderr = new BufferedReader(new InputStreamReader(process.getErrorStream()));
     * Gets the stdin attribute of the IOControl object
     * @return    The stdin value
    public PrintStream getStdin() {
        return this.stdin;
     * Gets the stdout attribute of the IOControl object
     * @return    The stdout value
    public BufferedReader getStdout() {
        return this.stdout;
     * Gets the stderr attribute of the IOControl object
     * @return    The stderr value
    public BufferedReader getStderr() {
        return this.stderr;
     * Gets the process attribute of the IOControl object
     * @return    The process value
    public Process getProcess() {
        return this.process;
     * Gets the alive attribute of the IOControl object
     * @return    The alive value
    public boolean isAlive() {
        return alive;
}thanks,
dave.

anyone?

Native Process Not Supported in Flash Builder 4.1

Hi,
I am using Flash Builder 4.1 and I am trying with native processing with the example from http://www.adobe.com/devnet/air/flex/quickstart/articles/interacting_with_native_process.h tml. When I tried to run the project in Flash Builder, it shows "NativeProcess not supported.". However, after I export release build, the application is working properly.
How can I have the native process to be able to run in Flash builder? So that it will be easier for me to test and troubleshoot the application. Thanks.

You need to add the following line in your ***-app.xml file for debugging mode
<supportedProfiles>extendedDesktop</supportedProfiles>
and
<supportedProfiles>extendedDesktop desktop</supportedProfiles>
for release build

Very strange bug with AIR and native process (Windows 7, EXE)

Hello to everyone!
The situation is:
I've made an AIR Application, inside of that is running a native process - EXE file.
I'm using Flash CC as IDE and tried to use compile that as EXE with AIR 2.6 and 3.6 - results are same.
So I've insert inside a checking if Native Process is supported or not and the Native process is supported all the time.
When I've just installed the application and run it - the very first attempt is good - everything is working as a must: internal EXE is called by my Application with necessary parameters as many time as I'm need.
However if I'll close the App and then will run it again - internal EXE is not starting at all, doesn't depends on number of attempts to re-start of the App.
So only way is to uninstall, install it back and then you'll be one more session of successful internal EXE-requests, till the next re-start of the App.
That's it.
I've tried to "google it" but unsuccessful. Probably the bug is very rare.
Help me please?
Update: at compilation with Flash CC IDE it's working all the time with no any issues.
Update-2: when I'm running installator-EXE, there is going a notification "Same version is installed, etc." and then selected "Run Now" - there is also working with no problems.

Well, I've found the solution and answer by myself and here is it please:
In case with same situation as above you need to add just one line in your AS3-code
nativeProcessStartupInfo.workingDirectory = File.applicationDirectory;
And you will be happy so much

Native Process running from Flash Builder but not from the installed exe

I have created an AIR application to launch a native process. The application works fine when tested in Flash Builder but doesn't runs when I create and AIR installer and run the installed exe. Any idea what might be wrong?

Have you created a native installer instead of just an AIR file.
-ted

Native Process Concerns on Linux and MAC

I have created an AIR application that has a feature to take screenshot of the screen. I have used "senthil.jar" to support screenshot capture.
http://sensaran.wordpress.com/2010/06/04/screen-shot-utility-using-air-2-0/
http://code.google.com/p/dtflex/downloads/detail?name=ScreenShot.rar&can=2&q=#makechanges
Native Process is created and used. I have also created native installers like -
exe for windows
dmg for MAC
rpm for linux
on windows everything works fine.But on linux and MAC one NativeProcess event is dispatched i.e. Event.ACTIVITY. No other event is dispatched.

I haven't tested JWS before JRE 1.4 so I can't recommend you anything if you require JRE 1.3 or before, but if you can install JRE 1.4, specially JRE 1.4.2 or after, JWS works very good on Linux and Windows. In both platforms I use deploy applications using JWS and they all work very good. I have no experience on Mac OS X.
Both platforms obviously require Java preinstalled. Also there is some ways to install Java automatically, this is something that must be done by an administrator as every other software that requieres installation and configuration on every PC. After that step, everything is very simple.
On Linux if you click on a .jnlp file for the first time, at least mozilla ask if you want to save the file or open it, you can select the javaws executable inside your java installation as the program to open this file, mark that that's the action you always want to do with that kind of files, and that's all. Also you can manually register .jnlp files and application/x-java-jnlp-file mime tipe as handled by javaws as the last part of the java installation and this first step will not be necesary.
On Windows the installer automatically register itself as insterested in handling jnlp files, so the previous step for linux is not required.
Hope this helps.
rivas.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Native Process works OK in FlashBuilder 4.6 'run' but won't export build

Similar Messages

Maybe you are looking for