Nautilus not thumbnailing the same way after upgrade to 2.20.

This would probably be a minor annoyance to most people, but to me, it is a great one.
Nautilus hasn't been generating the same type of thumbnail images as before. Touching the image makes it regenerate the thumbnail, but this doesn't even happen all the time. I have a screenshot to show you what I mean:
Click for bigger (non imageshack) version.
I am referring to the borders on the ticked images that aren't present on the others.
Last edited by DarkJesus (2007-10-16 01:55:11)

There's a bug report for it in gnome's bugzilla, see http://bugzilla.gnome.org/show_bug.cgi?id=478363, there's also a patch there which is committed to the 2.20 branch so it seems probable that it will be fixed in gnome 2.20.1 (which is due tomorrow), but who knows...
Last edited by Linteg (2007-10-16 09:28:56)

Similar Messages

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

HT204406 I have subscribed to match on iTunes and organized my music on my Mac Book. Why does it not appear the same way on my iPad

I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?

The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about.

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

HT1229 Can i move the iPhoto folder onto an external HDD? Will it work the same way after moving onto an external HDD? do I then need to have the external connected at all times, even when I don't use iPhoto?

I have a macbook pro, but the amount of pictures I have now exceeds 500GB
I want to have all the pictures in iPhoto, so I could see them and edit them in iPhoto.
Which means... I need the iPhoto file folder in an external HDD to use iPhoto that way.
Can i move the iPhoto folder onto an external HDD?
Will it work the same way, as if the iPhoto folder is on the internal drive?

yes
yes
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Messages from topic to multiple consumers are not ordered the same way

Hi,
We have a distributed topic. The message producer is a multi-threaded/connection producer (OSB in our case).
On the other side of the DT there are single connection consumers.
Our problem is that the consumers sometimes recieve the messages in different order:
Consumer A recieves message N and then N+1 (correct behaviour).
Consumer B recieves message N+1 and then N (correct behaviour).
This does not happen all the time. Most of the time the order is correct (99.9..%).
We also noticed that the message timestamp for message N and N+1 is the same.
This creates a problem for our system since both consumers must get the messages in the same order.
We cannot use UOO.
Any idea if this is a correct behavior for DT?
Any idea how to make the messages get to all consumers in the same order without using UOO?
Thanks,

Hi,
Hmm. You may have run into some new Bug given since "message timestamp for message N and N+1 is the same". First, let's dot our I's and cross our Ts to make sure that the system is setup in a way that will give you good ordering in the first place:
- Always use the same producer instance for each sequential send, and ensure that the producer's connection factory has "load balance" set to false. Note that OSB may be using a pool of producers implicitly for your sending app underneath-the-covers, which could lead to out-of-order, as different producers can load balance to different servers in your cluster. (I'm not sure how to check for this - if you provide a code snippet, I may be able to tell if this is happening.)
- Ensure that you only ever have a single thread processing the subscription - if you're using MDBs to receive from the subscription, then you need to ensure the MDB is setup to only startup a single thread (use a thread pool of size and/or set max-beans-in-free-pool to one)
- To account for out-of-order after app message processing failures (redelivery) with async consumers or MDBs, you need to (A) never configure redelivery delays, and (B) ensure the connection factory Maximum Messages setting is tuned down to 1 (it's default is 10).
I don't know how to do the above with OSB, which tends to layer it's own configuration on top of WL JMS configuration.
Assuming that you've assured all of the above, then you may have run into some sort of bug and I recommend filing a request with Oracle Support. In the mean-time, you might want to explore alternatives:
- Are you certain that you can't use UOO? It would be interesting to know why. This is a widely used feature (even by OSB itself), and it may be that you can enable it without any code change, plus, even if a code change is required, such changes tend to be isolated and small. In your use case, it looks like you may be able to configure a default UOO on the distributed topic itself (http://docs.oracle.com/cd/E11035_01/wls100/wlsmbeanref/core/index.html) - no code change needed - so that every destination member of your distributed destination will simply ensure that each new message is given the same UOO (a UOO that's particular to that member). OSB may provide some equivalent knob. Alternatively, you can code up your app so that each of your producers sets a useful UOO on each message.
- I assume you're using a replicated distributed topic (RDT). If there actually is a bug, then it would likely have something to do with the RDT's internal forwarders. If your consumers are MDBs or the SOA RA Adapter, then a simple alternative may be to use a Partitioned Distributed Topic (PDT) instead -- PDTs have no forwarders, and the MDB and the SOA RA Adapter can work with them transparently. If your consumers are neither of these, then working with a PDT will likely require that you use extensions (an advanced path that you may not want to take the time to follow).
Tom

[Fixed?] Cannot use mouse and touchpad at the same time after upgrade

Dell Inspiron 6400 laptop, Synaptics touchpad, external wireless USB mouse (Logitech).
Yesterday I did a full system upgrade which among other packages upgraded
[2007-11-08 00:06] upgraded synaptics (0.14.6-2 -> 0.14.6.99-1)
[2007-11-08 00:06] upgraded tzdata (2007h-1 -> 2007i-1)
[2007-11-08 00:06] upgraded xf86-input-keyboard (1.1.1-1 -> 1.2.2-2)
[2007-11-08 00:06] upgraded xf86-input-mouse (1.2.1-1 -> 1.2.3-1)
[2007-11-08 00:06] upgraded xf86-video-i810 (1.7.4-2 -> 1.7.4-6)
[2007-11-08 00:06] upgraded xf86-video-vesa (1.3.0-1 -> 1.3.0-5)
[2007-11-08 00:06] upgraded xorg-server (1.2.0-5 -> 1.4-4)
Before the upgrade, I was able to use both the touchpad and the mouse at the same time, using the following xorg.conf settings:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
EndSection
After the upgrade, the touchpad was still working with these settings but the mouse wasn't. I then changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "AlwaysCore"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. After this change the mouse was working but the touchpad wasn't. Finally, I changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USBMouse" "SendCoreEvents"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. This didn't change anything from the last setting: the mouse was working but the touchpad wasn't.
How can I restore the ability to simultaneously use mouse and touchpad?
Last edited by RobF (2007-11-09 20:20:54)

Try this:
Move "SendCoreEvents" to the Touchpad line (replacing the "AlwaysCore" bit) and then comment out the USB mouse. So in the end, it'll look like this:
Section "ServerLayout"
InputDevice "Touchpad" "SendCoreEvents"
# InputDevice "USBMouse"
EndSection
Restart X and see if everything is working right.
PS: You may also want to consider changing the Touchpad device line to "/dev/input/mouse2" instead of "/dev/psaux" as I believe psaux has been deprecated in kernel 2.6. I could be wrong, but I can tell you that /dev/input/mouse2 works great with the touchpad on my Dell e1505.

Opening multiple links in different tabs (not at the same time & after about seven tabs); I notice the sites don't load... Just sits, saying "Connecting..."

Linux jabber8440 2.6.32-25-generic-pae #45-Ubuntu SMP Sat Oct 16 21:01:33 UTC 2010 i686 GNU/Linux
Just installed firefox-4.0 from apt-get (ppa:ubuntu-mozilla-daily/ppa)
Using the beta version in the exact same manner as 3.6.11. Daily use involves editing mediawiki pages, perl based request tracker, nagios interface, and google searching for articles. I did the same steps in 3.6.11 and the links load almost immediately (even after clearing the cache).

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
If that did not help;
Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]'''

ITunes Playlist not organized the same way in iPhone?

I have my playlist organized in a chronological order for my podcast. Oldest first to newest last. My iPhone playlist is alphabetical? How can I have my playlist match my iTunes playlist in a chronological order?

the reason is that this is a bug, for playlists, smart playlists, and podcasts for many users.
It has been around for a while, and you can find all sorts of discussions about it in this forum, the ipod forum, and the itunes forum.
everybody keeps hoping that apple will fix it in the next firmware update, but there have been a few since then and it still hasn't been fixed.
the tip i posted works for playlists and smart playlists, my podcasts used to have the same problem but then for some reason they didn't.
are your regular/smart playlists messed up as well, or is it just podcasts?

Class.newInstance() does not work the same way in Java 5.0

We upgraded our development environment to RAD 7, and I am experiencing an interesting problem with the code below which worked perfectly with the previous version.
Class cloneClass = fromObject.getClass();
Object toObject = null;
toObject = cloneClass.newInstance();
I am using an open source hashtable called OrderedHashtable that uses the key-value lookup capabilities of a hashtable and order preserving capablities of a vector. It stores the objects in a hashtable and stores the keys in a vector.
fromObject in the code above is a key (String) that I retrieve from the OrderedHashtable and clone it using the code above. But with java 1.5 , the cloneClass.newInstance of this String object returns an empty string.
I guess there is a work around where I can check if the cloneClass is an Instance of String and just do fromObject.toString(), but I was curious to know if there was a change in the way class.newInstance() works in Java 1.5

>
fromObject in the code above is a key (String) that I retrieve from the OrderedHashtable and clone it using the code above.No. How could that code possibly clone a String? Where are you telling it what the new String's contents should be?
(HINT: Nowhere.)
I guess there is a work around where I can check if the cloneClass is an Instance of String and just do fromObject.toString(), but I was curious to know if there was a change in the way class.newInstance() works in Java 1.5No, it has not changed.

TS2518 What happened to all my images or why are they not in the aperture library after upgrading to 3.2.4 How do I find them?

I have recently upgraded my Aperture to 3.2.4 after doing so I found my library has disappeared, how do I search for it or find it again? Has anyone else experienced this? If so how did you fix this?

Have you checked the size of your apparently empty Aperture Library, if it really is empty? Sometimes a filter prevents the contents from showing. Are all search fields (in the Inspector, the Browser) cleared?
Sometimes an Aperture Library is written to the top level of your system drive, if you are having disk trouble.
In the Finder menu bar click "Go" > Go to Folder
and enter a Slash-character : "/", hit return
This will open a Finder Window at the top level of your system volume. Browse from there, if you can find a trace of your aperture library, but be careful not to change or delete anything.
Regards
Léonie
P.S. do you have a backup of your aperture Library?

My Aspire 7750G does not show the login screen after upgrade to Windows 10

I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.

joeboemoe,
The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?"

How to get pictures organised the same way on the iPad as they are on the PC?

When syncing pictures from my PC to my iPad the same albums are shown on my iPad as on my PC, but the pictures seems to be organised in random order within the albums, i.e. they are not organised the same way as on my PC. I've named all pictures on my PC and organised them based on name. Does anyone know how I can get iTunes/the iPad to sync the pictures in the same order?
Best regards,
Cecilie

Are you syncing the photos by selecting folders or by selecting a photo app that you have on your computer ? If you are syncing folders then they will be sorted by their 'date modified' fields (I assume that still applies on iOS 8), not by their filenames - so you will need to amend their 'modified' fields to be in the order that you want them to show in.
Or there are third-party photo management apps such as Photo Manager Pro (help pages) - you can copy photos to/from that app and your computer, and you can change the sort order of albums within the app.

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

Automation error element not found in vb6 2147319765 after upgrading the os

Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer

Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin

Nautilus not thumbnailing the same way after upgrade to 2.20.

Similar Messages

Maybe you are looking for