Necessary system dll before calling SAPbobsCom.dll

Hi:
I am using an application which allows me to call dll files in a specific folder. Hence, when I call SAPbobsCom.dll, the application needs related dll's supporting SAPbobsCom.dll. Could you tell me whatelse dll's are needed for calling SAPbobsCom.dll?
More detail: A normal application will check dll's registerred in the OS and use them. However, what I am using is not. Hence, I need to know what dll's registered to the OS are required by SAPbobsCom.dll. Thanks a lot

Hi
You can use e.g. Microsoft's "Dependency Walker" (<b>depends.exe</b>).
It is part of the tools shipped with MS Visual Studio, the Windows Resource Kit Supplements etc. (see the Microsoft home page for more: search e.g. for "depends.exe" or "198038 +depends.exe").
HTH,
Frank

Similar Messages

  • RTHDCPL.EXE - Illegal System DLL on startup - HHCTRL.OCX

    DLL error! HELP ME?
    This is what i got after a recent windows update had taken place and i had just restarted my laptop,
    'Application popup: RTHDCPL.EXE - Illegal System DLL Relocation : The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.'
    What in the world could have possibly happened between the short time of an update?! I'm frazzled.
    I'm guessing it might be to do with my speakers cause i googled this RTHDCPL.EXE...and it came up with the name of the sound device i have. ANY HELP AT ALL would be appreciated as i do not have any time to waste, i need this laptop for work.

    Please check this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21936
    Its about the same theme

  • RTHDCPL.EXE - Illegal System dll reloction - hhctrl.ocx

    Hi,
    I was wondering if anyone could tell me what this means and if so how to fix it. I have looked on the web but can't seem to find the info.
    RTHDCPL.EXE-ILLEGAL SYSTEM DLL RELOCTION
    The system dll user 32dll was relocated in Memory. The application will not run properly. The relocation accured because the DLL C;\windows\system 32\hhctrl.ocx occupied an address range reserved for windows system dll, The vendor supplying the dll should be contacted for new dll.
    Many thanks

    Why you dont check the other threads posted here in the forum.
    There a lot of postings which describe the solution for this update problem:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21936

  • Accesing system DLL resources

    Hi.
       I need one application in DLL´s Visual Basic i access it jni way very well. but when i put this access code in a WebDynPro i get one message of denied permision to com objetcts...
      I think that i have to modified a grant permission in the java.policy file.
      My DLL´s are living in c:windowssystem32
    i think that grant permission could be the next
    grant codeBase "file:c:windowssystem32-" {
      permission java.security.AllPermission;};
    is it correct ???
    is it the way o there are another ?

    First off, I would try adjusting your settings in the build spec. ie. Experiment with the settings by:
    1. Going to the advanced category and generating a build log file
    2. Enable debugging
    3. Go to additional exclusions and modifying these settings by disconnecting type defs and de-selecting all the other options. 
    If this doesn't work try deleting the build spec and starting the process over. Build specs can sometimes become corrupted.
    I am not sure what system.dll is used for but if it is needed for some reason then the best thing to do would be to figure out what system.dll is where is should be located and see if it is there. If it is not you may be able to see troubleshooting steps online to recover it. Do you know any more information about this dll? It seams to be so general that searching for it is difficult. I would advise against download just anything off the internet named system.dll just as a warning. If it is a commonly needed dll. It would be a target for malware or virus'. 
    Ryan
    Applications Engineer
    National Instruments

  • Illegal system dll relocation, contact vendor for new dll

    Unable to upgrade or test Schockwave due to the following message:
    illegal system DLL Relocation. The system DLL was relocated in memory. The application will not run properly. The relocation occurred because the DLL has occupied an address range reserved for windows system DLLS.  The vendor supplying the DLL should be contacted for a new DLL.

    You get this when doing what?  Shockwave Player or Flash Player?
    First thing I would recommend is a malware scan.

  • 8330 Call Forwarding​...How do I set the number of rings before calls are forwarded?

    8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
    Thank you 
    Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
    Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

    Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • [svn:fx-trunk] 12432: Added Capabilities. hasAccessibility check before calling Accessibility.updateProperties() in setter methods.

    Revision: 12432
    Revision: 12432
    Author:   [email protected]
    Date:     2009-12-03 06:59:10 -0800 (Thu, 03 Dec 2009)
    Log Message:
    Added Capabilities.hasAccessibility check before calling Accessibility.updateProperties() in setter methods.  This prevents an error on systems that do not support accessibility.
    QE notes: none
    Doc notes: none
    Bugs: (24454
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as

  • Basic Troubleshooting Steps Before Calling Support

    This is going to sound like a seriously noob question because it is.
    We have two Ironport C160 devices configured in a cluster in our enviornment.  Both seem to purr along nicely but one unit has "crashed" a couple of times in the past few months and I'm trying to figure out what to check, what to do, on the device(s) with regards to basic diagnostics/troubleshooting to find out what has happened.  I'd like to go to support have some basic ideas before calling support for assistance.  Any thoughts?  I'm wondering are there log files to check that might indicate a problem or something else I can look at to see what is going on?
    Any input would be greatly appreciated.

    Greetings,
    This is actually a great question.  Performing some initial diagnosis (information gathering) prior to contacting support can go a long way into speeding up  determination of root cause. It can also improve the accuracy of the analysis.  The first thing we have to do is determine what "Crash" means. Did the system become totally unresponsive or did is just become unresponsive to network requests? This reason this is important is that a system that is not responding to commands (locked up) may be encountering a different type of fault situation than say a system that is just not responding to network requests.   For example a system that is totally locked up and not responding to any commands from the console may be encountering an problem with the Raid controller or memory (hardware) while a system that is accessible via the console, but not via SSH or HTTPS may simple be over burdon with connections or may be experiencing DNS related issues.
    Before powering down the appliance or rebooting it, try connecting to the serial port first. In a majority of cases that we see, the appliance is operational but has encountered a network related issue that is preventing or limiting connections, including those to the GUI or via SSH. Console access will help you determine if the issue goes further than just a networking problem.  As mentioned the system logs can be helpful in a situation like this. The Status logs can also help you look at any trends related to a number of parameters, such as CPU, Memory, Connections in and out, as well as disk I/O. 
    Going further, if you do contact support we prefer that you do so Prior to rebooting the appliance. If you have to power cycle the appliance its possible to loose any logging details related to the event, therefore we would prefer to see the appliance in the fault state.
    I am including some detailed information below that outlines some basic diagnostic procedures that we recommend for events like this. If you are seeing such events on a regular basis it would be advisable to contact support so we can perform a more detailed analysis.
    Environment: Cisco IronPort Email Security Appliance (ESA), Security Management Appliance (SMA), all versions of AsyncOS
    Symptoms: You are unable to connect to your ESA or SMA appliance over the  network.  You have attempted to connect using the web interface and the  CLI via SSH and the appliance does not appear to be answering the  requests.
    In a majority of cases the appliance is not actually  locked up. It may simply be in a state that is preventing it from  responding to network requests in the usual manner.  Below are some  guidelines that can help you diagnose the problem, and possibly get your  system back up and running or at least in a state you can work with.
    It is very important that you do not power cycle the system unless advised to do so by technical support. Power cycling  the appliance can cause data corruption which can result in lost  messages, database corruption, lost logging data as well as damage to  the file system.   When you power cycle the appliance it is not able to  unmount the file systems cleanly. For this reason you should always use  the 'shutdown' or 'reboot' command from the CLI, or the Shutdown/Reboot  option listed under the system administration tab in the GUI.
    So what if you rebooted the appliance correctly, and still can not gain access via the network?
    Check the indicator lights on the appliance, are any lights on
    Are the lights for the hard drives on? Are they flashing?
    Are there any status codes on the front of the appliance?
    Did the appliance issue any audible codes when it started up (Beeping).
    In many cases simply swapping out the network cable or moving to another port on the switch can resolve the connectivity issue.
    Check the status of the indicator lights on the switch port if they are available.
    Check the status of the lights on appliance. Are they on, are they flashing?
    Are you able to connect directly to the appliance using a network cross over cable?
    A  network crossover cable will allow you to connect directly to the  Ethernet ports on the appliance. You will however, have to configure the  connecting host to be on the same subnet as the interface your  connecting to. Using a network crossover cable can be helpful in  diagnosing situations related to your LAN. One such issue is having  another host with the same IP address on the same subnet.
    Is  your appliance not responding to network requests or is it simply not  responding to service requests?  You can determine this using ping. If  you can ping the appliance but you can not SSH to it, then we know its  listening via ICMP and the SSH service is not responding or accessible.
    Have  you tested all network interfaces? Check to see if you can connect to  one of the other interfaces on the appliance using the process described  above.
    If your system is not responding to network requests  and immediate access is needed, you can connect to the serial port  located on the rear of your appliance. This port is a standard DB9  connector and can be utilized with the serial cable that came with your  appliance. If you do not have the serial that came with your appliance  you will need to obtain one that is configured as a null modem cable.  Optionally you can use a standard serial cable with a null modem  adapter. Once you have connected the cable to the appliance you can then  connect the other end of the cable to another system, such as a laptop.  You will need a terminal program like Hyperterm, or Procom. You will  need to configure your terminal program for 9600 Baud 8N1. Once you have  started your terminal program, you should be able to connect and get a  login.  In the event that the serial port is not responding you may want  to verify that the cable is connected and the unit is  powered on. If  you still cannot get a login it is advisable to contact customer support  for further assistance.
    If you are able to obtain access via the  serial port issue the command status, check to see if the appliance is  listed as being "Online".
        mail.example.com > status detail
         Status as of:                  Mon Jan 04 12:48:31 2010 CST
         Up since:                      Tue Jul 14 16:50:50 2009 CDT (173d 20h 57m 41s)
         Last counter reset:            Never
         System status:                 Online
         Oldest Message:                24 weeks 16 hours 30 mins 48 secs
         Feature - Centralized Tracking: 833 days
         Feature - Centralized Reporting: 833 days
         Feature - IronPort Centralized Configuration Manager: 60 days
         Feature - Incoming Mail Handling: Perpetual
         Feature - Centralized Spam Quarantine: 833 days
    If the status detail command does not respond or produces an error, contact customer support.
    Use the "Version" command to check the RAID status.
          mail.example.com > version
         Current Version
         ===============
         Model: M660
         Version: 6.5.2-101
         Build Date: 2009-05-28
         Install Date: 2009-07-14 17:04:32
         Serial #: 002C999999-J999999
         BIOS: 2.4.3I
         RAID: 1.21.02-0528, 2.01.00, 1.02-014B
         RAID Status: Optimal
         RAID Type: 10
         BMC: 1.77
    If  the RAID is degraded its possible the appliance is encountering other  that may or may not be related to the apparent lock up. If the Version  command will not respond or provide any data contact customer support.
    Check your network configuration using the command etherconfig.
         mail.example.com > etherconfig
         Choose the operation you want to perform:
         - MEDIA - View and edit ethernet media settings.
         - VLAN - View and configure VLANs.
         - LOOPBACK - View and configure Loopback.
         - MTU - View and configure MTU.
         []> media
         Ethernet interfaces:
         1. Data 1 (Autoselect: )) 00:22:19:b0:03:c4
         2. Data 2 (Autoselect: )) 00:22:19:b0:03:c6
         3. Management (Autoselect: <1000baseTX full-duplex>) 00:10:18:4e:29:88
         Choose the operation you want to perform:
         - EDIT - Edit an ethernet interface.
         []>
         Choose the operation you want to perform:
         - MEDIA - View and edit ethernet media settings.
         - VLAN - View and configure VLANs.
         - LOOPBACK - View and configure Loopback.
         - MTU - View and configure MTU.
         []> MTU
         Ethernet interfaces:
         1. Data 1 default mtu 1500
         2. Data 2 default mtu 1500
         3. Management default mtu 1500
         Choose the operation you want to perform:
         - EDIT - Edit an ethernet interface.
         []>
    Recent network changes can have an impact on connectivity to the appliance.
    Use the command "interfaceconfig" to verify your interface settings.
       mail.example.com > interfaceconfig
         Currently configured interfaces:
         1. Management (192.168.1.33/24 on Management: downside.hometown.net)
         2. outbound_gloop_ISQ_notify (192.168.1.34/24 on Management: inside.hometown.net)
         Choose the operation you want to perform:
         - NEW - Create a new interface.
         - EDIT - Modify an interface.
         - GROUPS - Define interface groups.
         - DELETE - Remove an interface.
         []>
         Try flushing out all the network related cache.
         mail.example.com > diagnostic
         Choose the operation you want to perform:
         - RAID - Disk Verify Utility.
         - DISK_USAGE - Check Disk Usage.
         - NETWORK - Network Utilities.
         - REPORTING - Reporting Utilities.
         - TRACKING - Tracking Utilities.
        []> network
        Choose the operation you want to perform:
        - FLUSH - Flush all network related caches.
        - ARPSHOW - Show system ARP cache.
        - SMTPPING - Test a remote SMTP server.
        - TCPDUMP - Dump ethernet packets.
        []> flush
        Flushing LDAP cache.
        Flushing DNS cache.
        Flushing system ARP cache.
        10.92.152.1 (10.92.152.1) deleted
        10.92.152.18 (10.92.152.18) deleted
        Network reset complete.
        Choose the operation you want to perform:
        - FLUSH - Flush all network related caches.
        - ARPSHOW - Show system ARP cache.
        - SMTPPING - Test a remote SMTP server.
        - TCPDUMP - Dump ethernet packets.
        []>
    If any of the network related commands fail to respond, contact customer support.
    Once  you have performed these steps, if you are still unable to gain access  via the network it would be advisable to contact customer support for  further assistance.
    Christopher C Smith
    CSE
    Cisco IronPort Customer Support 

  • HELP.. System crashed before i can deactivate my Adobe Acrobat 8

    My system crash before i could deactivate my acrobat..
    IBM has since replaced a new HDD with Vista on it and i have since tired to reinstall Adobe Acrobat 8.0 with my serial No.
    I keep getting a message stating that my serial no has already been used (or something within that line)... how do i get it to work..
    Please help
    Justin

    Each commercial copy of Acrobat 8 was usable by the same person on two computers via the activation process, Adobe manages. When you try to activate a third time a dialog box comes up with a telephone number for you to call. You need to call the number, explain the circumstance, and then Adobe will grant you another activation. There is nothing anyone here can do to help you.

  • MacBook Pro - all updates - Facetime initiates call but disconnects before call is connected

    MacBook Pro - all updates - Facetime initiates call but disconnects before call is connected

    Does your mic work in System Preferences?
    System Preferences > Sound > Input
    There is an Input Level meter that should light up when you talk. Just to make sure your mic and Mac are working.
    Which mic are you using? Are  you using the built in mic on an Apple Display? I have Apple's LED display and every time I use Facetime, as in place or take a call, the mic input volume gets reset to a level so low, people can't hear me. I have to manually raise the mic volume back to where I had set it. When I end the call, Facetime resets the volume back to where I set it. If I don't reset the mic volume level on each and every call, people can't hear me.
    I called Apple on this. They downloaded a log file tool to my Mac and took some logs. Then they called me back and said this works as designed. Incredible.
    So, if you are using Apple's LED display, this may be your problem. Note that the mic volume level gets set low and reset back only during a call. If you check it before a call and then after a call, it looks fine as if nothing changed. Open up the Sound prefernces and watch it get reset in real time.

  • I cannot open Adobe photoshop CS2 which I was using 10 days ago.  Can I restore the system to before 10 days, so it will work again?

    I cannot open Adobe photoshop CS2 which I was using 10 days ago.  Can I restore the system to before 10 days, so it will work again?

    The hatter wrote:
    Rosetta can have a 2GB RAM "tax" to manage PowerPC code as well as how that affects performance.
    I think real world performance shows both statements to be wrong; consider this:
    If that were the case, how come Apple does not include that information in its Snow Leopard installation requirements, since Rosetta is an optional install?
    Also, running a PowerPC app on an 2011 i7 Mac with Snow Leopard will run faster than running that PowerPC app on a PowerPC Mac.

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • How to Run Operating System Command Before/After Message Processing SAP PI

    Hi,
    We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
    When we use single command say for example cp or mv (copy or move) the commands get executed fine.
    eg: cp %F /var/opt/data/outbound/Test/Dummy.txt 
    /this works fine/
    when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
    eg:
    cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
    or
    wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
    Is it possible to execute multiple commands or redirect the output  of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

    Hi Harleen,
    try like this
    cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
    instead of semicolon try this
    (1) &
    command1 & command2
    Execute Command1 and then execute Command2
    (2) &&
    command1 && command2
    Runs the command2 only when command1 doesn't Complete successfully
    (3) ||
    command1 || command2
    Runs the second command if the first command had an error
    (4) ()
    (command1 || command2) || (command3 & command4)
    Defines the order in which commands are to be executed
    Regards
    Suraj

  • System failure, during call of function module RSWR_RFC_SERVICE_TEST

    Hi Team,
         I am working with BW and Portal Integration, with the Netweaver
    2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
    to test the configuration.
    The error is on status 5 and 12, i get the following error:
    System failure, during call of function module RSWR_RFC_SERVICE_TEST,
    and when i enter at the dev_jrfc.trc log file, i have the following
    error:
    Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
    application running in JCo Server
    java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
    smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
    with SSO not authorized: No login module succeeded.
            at
    com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
    (RFCDefaultRequestHandler.java:79)
            at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
    (RFCJCOServer.java:156)
            at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
            at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
    (MiddlewareJRfc.java:2405)
            at com.sap.mw.jco.MiddlewareJRfc$Server.listen
    (MiddlewareJRfc.java:1728)
            at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
            at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
            at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
            at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
            at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:170)
    Could you help me to solve this issue.
    Thanks so much.

    Have you checked the user that is used to connect from J2EE back to ABAP?
    I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
    Hope this helps.
    Cheers,
    Andrew

  • My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    Hi Jpcbew,
    The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system. 
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    So long,
    -Jason

Maybe you are looking for