Need a convenient method to record ALL sound in- and output

Here's what I'm going to do: I'm working for a small music magazine and I'm going to be responsible for some of the interviews from now on. As they are often done by telephone I'm planning to use Skype, as it's a cheap method to call to foreign countries.
Now I need a simple and convenient method to record these calls for later review. I tried using 'arecord', but it takes sound from the capturing device set in 'alsamixer', which is either the microphone or the mixer (general sound output). However it has to be the microphone, otherwise I cannot talk in Skype.
So, 'arecord' is going to record the device which is set to capture, which is the microphone, so, I'm only getting my voice recorded, but not that of the interviewee.
It would be ok to have something that just records all audio output (independently of what's set in alsamixer) as I usually redirect the microphone to the output as well as I wouldn't hear me that well with the headset on. Commandline-tools would be prefered.

Hi,
Do you mean that you want all 7 dates together on 1 row?
Here's one way:
SELECT LISTAGG ( TO_CHAR ( SYSDATE + 1 - LEVEL
                          , 'DD-Mon-YYYY'
                ) WITHIN GROUP (ORDER BY LEVEL)    AS txt
FROM    dual
CONNECT BY LEVEL <= 7
This is an example of String Aggregation, that is, taking a column on multiple rows, and concatenating all the values (however many htere happen to be) into 1 big string column 1 row.
Like everything else, exactly how to do it depends on your Oracle version.
For more on String Aggregation, including differetn techniques for different versions, see http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Message was edited by: FrankKulash
Sorry, I mis-read the question.

Similar Messages

  • How do I record a sound file and send it as an attachment using my 4s?

    How do I record a sound file and send it as an attachment using my 4s?

    Hi,
    The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
    Thanks & Regards,
    Rock.

  • Sound Input and Output Disappeared

    I am considering a purchase of a used Macbook Pro (4,1) from early 2008 with Snow Leopard 10.6.8 installed. When I first tried the machine, the sound input and output were absent. After removing preference files, resetting NVRAM, etc., I finally got them to work. They worked for a few weeks, but recently they disappeared again. This time, my efforts to ressurrect them have been fruitless.
    Here is what I have done in an attempt to remedy the situation:
    •Delete com.apple.audio.DeviceSettings.plist and com.apple.audio.SystemSettings.plist
    •Jiggle a digital headphone jack in the headphone port
    •Verifiy Disk and Repair Permissions
    •Reset NVRAM
    •Reset SMC
    I have read online that some people have replaced the AppleHDA.kext file with the one from 10.6.7 - however, every effort I have made to find this file has resulted in failure. I am not able to locate MacOSXupdCombo 10.6.7.pkg anywhere on the web
    Any recommendations? I was able to fix this once before - why not now? Thanks for any and all constructive input...

    Did you recieve the install disk(s) when you purchase the machine? I would try doing a back up of your data then a fresh install of the OS. Insert the disk into the mac then click restart and hold the c key, ten follow the prompts.
    If you wish to take this route, I would try the 10.6.8 combo update first (it should be fine to run it again), then if you wish you may try the 10.6.7 update. Altough I would just do a OS X reinstall and then run software update till you bring it up to date. On disk 2 there should be the AHT (Apple Hardware Test) that you can run by booting the disk holding the D key to check for a hardware fault.
    You may also make a Genius bar appointment for a free evaluation, they have more extensive diagnosis tools and would then tell you what your otions would be. (hey it's free)
    Genius Bar appointment http://support.apple.com/kb/DL1361
    10.6.8 Combo update
    http://support.apple.com/kb/DL1399
    10.6.7 Combo Update:
    http://support.apple.com/kb/DL1361
    All the Best

  • Sound input and output gone

    After i updated to 10.5.4, my sound input and output disappeared. I've tried to update my quicktime once and i've also reinstalled the 10.5.4 update without any luck. I have a Leopard dvd, but i'm not sure whether i'm able to only install the sound drivers once again? Any other suggenstions?
    thanks in advance

    Thanks.
    I did reinstall the combo, if you mean this one; http://www.apple.com/support/downloads/macosx1054comboupdate.html. And it didn't help, there isn't anything in input or output in the sound preferences panel.
    Isn't it possible to perform an install of the sound drivers without having to do a total format? I've looked through my leopard disk content and checked all the optional installs and haven't been able to find them.. Can i download them seperately somewhere?

  • Video playback freezes then all sound stops and video continues....grrrrrr

    I know there has been various posts re this problem and after much reading have figured there's a prob with the 1.1 ipod updater software and the answer seems to be to degrade but what if your ipod is brand new (3 days old) and came with the 1.1 software where do I get the older version.
    Is degrading easy enough to do or should I wait for a new version? Pls bear in mind I have only been using my ipod for 2 days and am not the brightest spark on the pc...lol!
    Thanks in advance.
    Packard Bell   Windows XP   iPod Video 60BG Black

    I personally just did the downgrade to 1.0 and everything works fine. The only thing is that you have to use all of 1.0's features... like holding menu doesnt bring you back to the menu screen, it turns off the backlight... WHATEVER.
    downgrading really does work. I had to erase all my songs and movies to do it but it only took a lil while to put them back on.
    downgrading is really easy to do... if you have the 1.0 updater. The only way I can fathem YOU getting it is if you know someone who has an ipod that was released before 1.1 came out and using their CD.
    heres how to do it:
    uninstall the 1.1 updater
    put in the CD
    run the 1.0 updater from the CD (cddrive/program files/ipod/something something updater)
    click restore
    wait for it to finish
    then (in theory) you should have 1.0 on there. It worked for me, but my ipod came with 1.0.
    AND ive heard that this problem only effects 60GB models and movies converted with 3rd party software (ie VIDEORA or PSPVIDEO9). Both of which are superior if they would work with 1.1.

  • Sound input and output not working

    Last night my audio was working fine. I was going to record some stuff in garage band and had a microphone plugged into the input line-in on my macbook. everything was working fine still, turned on the "auto leveling" and then put in my headphones. i then turned on the "monitor" to get the sound to actually come to my headphones. I didnt realize until after it was done but you cant have the auto level and monitor on at the same time. There was a short blast of sound in the headphones and then everything cut out. I couldnt get sound from anything, headphones, built in speakers. No sound going in either.
    I restarted my computer and if I remember correctly (maybe i'm imagining it) there was the start up chime. when I started up garageband again I got an error message reading "selected driver not found. error 10202" still no sound input or output. When trying to adjust the volume all I got was the grayed out volume thing with the little cross thingy at the bottom. I checked the sound settings and there was nothing in the input or output sound.
    I did some searching around and saw people with similar problems (none with an answer).
    This is what I've already tried:
    I reset the permissions
    I reset the PRAM
    I did a hardware check (hold d which restarting) i even did the hour long check and there was no problems.
    I tried putting headphones in an out (there was no red light in the headphone jack)
    I updated all my software (there was an update to OS X to 10.5.8)
    After the update there was no longer a startup chime, and i got no error messages when opening garage band. however there was still no input or output sound. when adjusting the volume on the screen it appears to be normal, but there is still no sound from built in speakers or headphones. I did notice there was a very faint "clicking" noise when i try and adjust the volume... like the speakers are getting power or something... but then nothing comes out. In the sound settings there everything appears to be back to normal.
    I know this is long, but I wanted to be thorough in describing my problem. I'm posting this on several boards as well.

    I'm having the exact same problem. I did install the newest version of Skype the last time my computer was running (with sound)... so not sure if the new Skype had something to do with it.
    Also, when I try to change volume with the keyboard keys, there is a little icon (circle with slash) indicating that the sound has been disabled or not allowed to be changed.
    I can't find any answers on any forums.

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

  • Need to change email address for all users / employees and their supplier

    Hi All,
    Our organisation is going through some infrastructure changes and all employees email addresses will be changing throughout the department in the next few weeks.
    Is there a supported method to update the FND_USER.email_address, PER_ALL_PEOPLE_F.email_address and Employee Supplier email address within our Oracle system to the employees new email address
    Would you be able to provide a solution or recommend a datafix (SQL Update script)?
    Many thanks,
    Lance

    Oracle's update:
    UPDATE
    ======
    kindly there is no ready code script for this issue
    as per Oracle policy ,customizations are not supported
    Thank you,
    Global Customer Services
    I'll look into the Packge FND_USER_PKG thanks and see what i can spot. Any one ever done something like this before?
    Thanks,
    Lance

  • TS4036 I had to create a new Apple ID because the previous ID was linked to my daughters phone. Apple ID setup was successful but now I need to know how to backup all my information and create a new iCloud ID because we're sharing storage space.

    Had to create a new AppleId because the old one that I had was linked to my daughters IPhone account now that was successful I'm having trouble setting up a new iCloud account under my new apple ID due to it not transferring.

    If you have both already been syncing data to the same account and now have merged data, you would have to set up a new account with your new ID, migrate a copy of the data to the new account, then eliminate your daughter's data from your account and vice versa.
    To do this, on the phone that will be changing accounts go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.  When prompted choose to keep the data on the iPhone.  After everything is turned off, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The other phone will not be effected by this.)  Next, set up the new iCloud account on this phone using the other Apple ID and turn iCloud syncing for for contacts, etc. back to On.  When prompted, choose Merge.  This will upload the data to this new account.  At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
    You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting your daughter's contacts from your account, and vice versa).  These changes will be reflected on each phone.  When finished you will have individual iCloud accounts with just your own data on them.

  • How do I remove the shared link that's shares my contact information? I need to remove the link off all my contacts and not just on an individual basis. Somehow my boyfriends iPhone can see all of my contact information.

    Unshare my contact information so no one is able to see it.

    In addition my icloud is turned off and I also removed the shared linked off of my boyfriend's contact information on my phone but he still has access to all my contact information. I see the shared links in all my other contacts as well but I'm not sure if unlinking each contact will help. Is there another way to unshare the contact information?

  • Sorting records all except one  and maintaining index

    I have a mysql table with three attributes.
    att1 | att2 | att3
    1 | 0.1 | 0.2
    2 | 0.4 | 0.3
    3 | 0.2 | 0.1
    4 | 0.3 | 0.5
    Now through my program, I select one record according to attribute 2. Suppose in this case I select the value 0.2(from att2) and get the index. Now what I want to do is: sort descending(here is want to exclude index 3 since it has already been identified by the first part of the program) according to the rest values in att3. I want the corresponding index of of these values too.
    Can anyone help plz.... I have tried to make the problem clear...In case of doubt please ask me..
    Thanks in advance
    Rakesh

    thanks..
    i already solved it..
    but thanks anyways....
    its nice of u to ask

  • Managing all the source and output files

    We have built 100s of Captivate modules. Does anyone have a
    recommendation on a good (reasonable $) digital asset management
    system to manage all of this?

    Hi again Scott
    Ummm, okay. I'm still a bit at a loss as to what you are
    looking for. I'm guessing you mean that you want some sort of a
    system that would deal only with your source files. Only seen by
    you or the development team?
    On your initial post, I could see where you may have been
    wanting something on either side. Either a way to manage many
    different output files and present them as a cohesive whole to the
    user. Or a way to manage the source content as you work with it.
    So you aren't looking for source control per se, but
    something more. Exactly what, we aren't sure. Perhaps try to
    explain what you would like to see in such a system. Maybe if you
    do that, someone here might see your list of desirable features and
    recommend a system they have used before or are aware of that does
    it.
    Cheers... Rick

  • Need help in framing an SQL query - Sample data and output required is mentioned.

    Sample data :
    ID Region State
    1 a A1
    2 b A1
    3 c B1
    4 d B1
    Result should be :
    State Region1 Region2
    A1 a b
    B1 c d

    create table #t (id int, region char(1),state char(2))
    insert into #t values (1,'a','a1'),(2,'b','a1'),(3,'c','b1'),(4,'d','b1')
    select state,
     max(case when region in ('a','c') then region end) region1,
      max(case when region in ('b','d') then region end) region2
     from #t
     group by state
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to control the volume of all sounds in the movie (even if they were in the time line (no instance name)

    Hi,
    I need to control the volume of all sounds in the movie even
    if they were in the timeline so they do not have an instance name,
    by AS3.0 code?
    thanks a lot.

    :
    var st:SoundTransform=SoundMixer.soundTransform;
    st.volume=whatever;
    SoundMixer.soundTransform=st;

  • Stop all sounds

    Hi everybody,
    i load external swf to the main movie. They all have sound. Have no problem to stop sound of the main movie (by the behaviors), but it doesn’t stop the sound of the external one. What AC should be used to stop all sound, external and internal?
    Thanks
    S

    believe it or not, you nearly hit it right on the head!  lol   under AS2 the line is:  stopAllSounds();

Maybe you are looking for