Need a fonction : start- and end-ID for reading musicfiles in keynote

My english is not good, but I'm asking for a new fonction in keynote. I really need a fonction in keynotes for making music presentation : to be able to give a startpoint and an endpoint for playing music. To prepare the cuts in the music (to make some extracts) before making keynotes presentation takes too much times! I really wish this fonction : to be able to say : "I want the reading starting at 1 minute and 36 seconds, and ending at 2 minutes and 7 seconds", for exemple. Is it too complicated?

Hi, You can create UDFs for Roles in catalog search.
These UDFs can be made visible in Role similar to Role Owner and different fields which appears in the bottom of catalog search page.
HTH,
~J

Similar Messages

Custom text component with different start and end points for each line

I'm trying to create a custom component extending textArea in which each individual line in the textArea would have different start and end points. For example, the start/end points for line 1 might be 20 pixels in the front and 35 pixels at the end but start/end points for line 2 might be 25 pixels in front and 20 pixels at the end, etc. These boundary values would be passed in. The width of the entire textArea component would be a fixed size. The result would be something like this:
Jack and Jill
ran up the hill
to fetch a pail of water
depending on the boundary values of each individual line of course. The custom component would take a string and render it in the text component with the appropriate individual line start and end points. I'm trying to do this by adding the text component to the display with the passed in string and then adding in spaces in the beginning of each line and adding a "/n" at the end of the line wherever appropriate based on the start and end values for that line.
Just wondering if I'm on the right track and if anyone has any advice on this.

> Applying the marker places the same icon on all lines of the graph and I need a different one for each
What do you have selected when you assign the marker? It
shouldn't apply to all the markers on the whole graph unless you have all the existing markers selected when you apply the new one.
Assigning marker designs is exactly analogous to assigning bar graph designs.
If you have a single marker selected when you assign the new design, it will apply to only that graph data point.
If you use the group select tool (or option-click with the direct select tool) to reclick on an already-selected marker until all the markers for the same line are selected, and then assign a design, the new design will apply only to the selected line. (You can extend the graph by adding more rows, and the new data points will inherit the marker for the line they are on.)
The thread linked to below demonstrates in more detail how the marker designs are scaled:
http://www.adobeforums.com/cgi-bin/webx/.3bc10970/0

Start and End dates for users in Enterprise portal

Hi Expert,
I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

Hello
Please check below URL for User Import Format:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
Regards,
Tapan Goyal

Start and end time for a mapping in process flow

We are executing 6 mappings in a process flow. 4 out of 6 run in parallel . The log file created in a control center denotes start and end time for a process flow. But Is there any way to find out how long those individual mappings took ? Is start/end time logged on a mapping level somewhere ?
Thanks

As well as the repository browser you can use the SQL Developer reports on the utility exchange which are based on the public views.
http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
You can dig in and see how these are read from the SQL views.
Cheers
David

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

Effective start and end dates for a compensation workbench plan

Hi all,
We are having a requirement where we want to get the data respective to current plan for reporting purposes. What i have noticed is there is no such thing as effective_start_date and effective_end_date directly in all the cwb tables.
The different dates we are looking at to capture the data are
enrt_perd_start_dt and enrt_perd_end_dt
upd_strt_dt and upd_end_dt
within_yr_strt_dt and within_yr_end_dt
But we have same plan with different enrollment period and start dates. We are planning to use max(data_freeze_date or lf_evt_occrd_dt) to get
the records.
select max(nvl(bcpdx.data_freeze_date, bcpdx.lf_evt_ocrd_dt))
from ben_cwb_pl_dsgn bcpdx
where bcpdx.pl_id = p_pl_id)
Catch with this is, We have 62 business groups off which only 50 might run the plan next year and ohters might not. in that case it will also return data for all the BG's including the 12 BG's where plan has not been run for that year.
Any suggestions or help will greatly be appreciated.
Thanks
Hari

Hi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas

Effective start and end dates for roles/group assignment

Hi,
Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
Thanks,
Srinivas

Hi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

Get start and end date for posting period (YYYYMMM format)

In revenue recognition I'd like to have the start date and the end date of the posting period, which is in format YYYYMMM. It's field VBREVR-BDJPOPER.
Any idea?
I had no luck so far to find a relevant FM.
Thanks in advance,
Peter

Hi,
Use this FM To convert the date into DD.MMM.YYYY format
CONVERSION_EXIT_SDATE_OUTPUT.
Use the followiong FM To convert the date into user specified format
SLS_MISC_CONVERT_TO_DATE
Rewaed if helpful.
Regards,
Sandhya

Calculate Start and End date in Connect By -- When Hirerchy Changes

/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID                 VARCHAR2(10 BYTE),
EMP_MGRS_ID         VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT    DATE
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
             TRIM (
                LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
                                 || ','
                                 || b.emp_mgrs_id
                PATH,
             START_EFFECTIVE_DT Start_dt,
             END_EFFECTIVE_DT End_dt
      FROM   PERSON_DTL b
     WHERE   CONNECT_BY_ISLEAF = 1
START WITH   sid IN ('A101', 'A100')
CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID    PATH                       START_DT    END_DT
A100    A100,M100,M101,M102,M103,M104    1/1/2010    12/31/9999
A100    A100,M100,M107,M102,M103,M104    1/1/2010    12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999
Results Required
A100    A100,M100,M101,M102,M103,M104    1/1/2010    5/18/2013
A100    A100,M100,M107,M102,M103,M104    5/20/2013   12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999

May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2         min(end_dt) end_dt
3 from
4 (
5    select agent_sid,path,start_dt,end_dt,
6           sum(flg) over(order by rn) sm
7    from
8    (
9      select agent_sid,
10             path,
11             start_dt,
12             end_dt,rn,
13             case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14      from
15      (
16        SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
17                 TRIM (
18                    LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
19                                     || ','
20                                     || b.emp_mgrs_id
21                 )
22                  PATH,
23                 START_EFFECTIVE_DT Start_dt,
24                 END_EFFECTIVE_DT End_dt,rownum rn
25        FROM   PERSON_DTL b
26        START WITH   sid IN ('A101', 'A100')
27        CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
28      )
29    )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH                                     START_DT END_DT
A100       A100,M100,M101,M102,M103,M104            01-JAN-10 18-MAY-13
A100       A100,M100,M107,M102,M103,M104            20-MAY-13 31-DEC-99
A101       A101,M105,M106                           01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists..

PowerShell - Get-MessageTrackingReport how to specify start and end time of current process

could you please help me? I need to specify start and end time of current process with Get-MessageTrackingReport command. I know you
can do it with Get-MessageTrackingLog:
$start = (Get-Date).Addhours(-1)
$end = (Get-Date)
Get-MessageTrackingLog -EvenId Receive -Start $start -End $end
But for my purposes I really need to do it with Get-MessageTrackingReport command, so how can I do it?
Thanks in advance!

That's not the context you would use
Get-MessageTrackingReport in,
Get-MessageTrackingReport is used to get extra information on messages that you have found in the MessageTracking log using Search-MessageTrackingReport . That's why the most common example you see will look like
$Temp = Search-MessageTrackingReport -Identity "David Jones" -Recipients "[email protected]"
Get-MessageTrackingReport -Identity $Temp.MessageTrackingReportID -ReportTemplate Summary
The most important parameter for that cmdlet and the reason it won't work like your trying to use it is the
Identity ""The Identity parameter specifies the ID of the message tracking report ID to retrieve.You should run the Search-MessageTrackingReport cmdlet
to find the message tracking report ID for the specific message you're tracking, and then pass the value of the MessageTrackingReportID field
to this parameter." see http://technet.microsoft.com/en-us/library/dd351082%28v=exchg.150%29.aspx
It's more appropriate to use Get-MessageTrackingLog when you want to search the log based on time or use
Search-MessageTrackingReport and then limit the results this returns before you pass the MessageTrackingReportId to get-MessageTrackingReport
Cheers
Glen

In Month View, showing start and stop times for appointments

Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave

I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.

Hwo to obtain the DST start and end times

Hi all -
Is there a way in java to obtain the day light saving start and end times for a certain year for US?
I know that US DST changed in the year 2007 so, I am wondering if I can get correct DST start and end times for certain period before 2007 and after 2007.
I read online that JDK preserves historical DST rules so I am hoping this is possible but do not know how.
Thanks,

Any idea is appreciated [otehr than incrementally iterating through each hour of the year to know the transition time !!!! )
That's why I mentioned +dichotomy+ (EDIT: the english wording is +binary search+ ): set the initial date to Jan 1st, 00:00, then add 183x24 hours (half a year), if the hour has changed (which it will), there was a DST change in the first half of the year. Then substract 92x24 hours (a quarter of a year) from this new instant, if the hour has changed, the DST change was in the 2nd quarter, else it was in the first. Then add or substract 46x24 hours,... and so onEdited by: jduprez on Feb 2, 2011 9:15 AMWARNING: for anyone reading this in the future: this algorithm is flawed, unless there is further guarantees in the problem domain of DST rules:- if the DST shifts (up +1 hour then back) are less than 6 months apart (obviously it may occur, with a one day margin)- and if in some odd timezone DST shifts may occur around mid-yearThen the first binary chop could find the same hour at both ends, and miss both shifts.My apologies for posting not-well-thought suggestions...

Start and end balance per month

Hello,
I am new in building formulas.
I have the following values in in my table, I would like to find out the start and end balance for month Jan and Feb.
Table: Transactions
Date
Balance
02/Jan/2014
100
05/Jan/2014
150
25/Jan/2014
120
09/Feb/2014
180
14/Feb/2014
200
16/Feb/2014
100
22/Feb/2014
190
Table: Results
Jan
Feb
Start balance
100
180
End balance
120
190
Can you please help with the simplest formula to get the above result?
I don't know when the first and last transaction will occur in a certain month. Also I don't know the total number of transactions per month.

I would like to find out the start and end balance for month Jan and Feb.
Assuming you are looking for the starting and ending balance for each month, and not the maximum and minimum balance, then you could do something like this:
Add an Index column to your Transactions table that extracts the month name with this formula in C2, copied down:
   =MONTHNAME(MONTH(A2))
(I first had to change the format of the dates in column A so Numbers would recognize them as dates on my machine.
In the results table I made sure I entered January and February as text, by typing an apostrophe (single quote) and typing the month name. Otherwise Numbers smart date recognition will try to turn the month name into a date. (Note I used the full month name rather than an abbreviation.)
The formula in B2 of the Results table, copied to C2, is:
    =INDEX(Transactons::$B,MATCH(B$1,Transactons::$C,0))
The formula in B3 of the Results table, copied to C3, is :
     =INDEX(Transactons::$B,MATCH(B$1,Transactons::$C,1))
The INDEX MATCH combination is a flexible alternative to the LOOKUP, VLOOKUP family of functions. Here changing the last parameter in MATCH does the trick for finding the start and end balance.
SG

Need a fonction : start- and end-ID for reading musicfiles in keynote

Similar Messages

Maybe you are looking for