Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9
Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9
Did you set up virtual pads to assign the Simmons kit in layout mode? In layout, select the group controls tab in the screen control palette. Select the desired pad group(8, 12, or whatever) and drag it onto the layout area. Select a pad and press assign in the screen control inspector. Tap on a Simmons pad and it should be able to learn the pad assignment and note number. Repeat for the other pads. Hope it works for you.
Similar Messages
-
having problems trying to get my security question and answer sent to my email and it is not showing up
Do you mean that the reset link won't show on your account or that the email doesn't arrive on your rescue email address ?
The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) on your account.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions), or you aren't receiving the email to it (you've checked the spam folder on the account and tried clicking the reset link again) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
I have a new computer and I am trying to find a link to download photoshop elements premier 11 the link I was sent by the tech only shows what I need...what I need is an actual download button
This is actually the Photoshop forum. Premiere Elements forum is here
Premiere Elements
I assume you realise that 11 is not the current version, which is now up to 12
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
And if yes, that you had 11 installed on your last computer? Did that come on a disk or download? If disk, have you now lost that disk?
If yes, and you registered your software, log on to your Adobe account, and find My Orders (or similar). You may find the download link and your serial number there. -
When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.
Did you select View->Bcc Address Field from the menu bar?
-
when I'm checking my emails and click on a link that was sent to me in the email, how do I get the link to open?
Identify and remove adware
http://www.thesafemac.com/arg/
or use Adware Removal Tool.
http://www.thesafemac.com/art/ -
I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.
The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work. -
When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you
Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support. -
HT5624 how can you get your password sent to your email address I do not want to change my password.
How can you get your password sent to your email address I do not want to change my password.
If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
1) Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either. Replying used to work fine, but all of my replies are sent to my inbox, instead of going to the recipient. I've made sure that the recipient's email address is in the send to box.
Read please this posted by Tanzim
Cause of the issue
Gmail webmail accounts do not have separate sent items and inbox folders. The Gmail account web page contains a Sent Mail link on the left side, but this is not a separate folder from the inbox. Gmail webmail messages are grouped into conversations, resulting in all sent messages and replies from others appearing as a single email message entry in the inbox. This allows for easy reading and viewing on the Gmail web page, but, when integrated with the BlackBerry Internet Service account, results in copies of sent email messages arriving on the BlackBerry smartphone as new email messages.
Resolution
To prevent sent messages from returning to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block the sending of those messages to the BlackBerry smartphone.
To create a filter, perform the following:
Log in to the BlackBerry Internet Service account. For instructions on how to log in to the BlackBerry Internet Service account, see KB03781.
Click the Filters icon next to the integrated Gmail account.
Click Add a Filter to create a new filter.
Configure the filter so that email messages are not sent to the BlackBerry smartphone if the email message originates from the Gmail webmail account integration:
Type a name for the filter into the Filter Name field. For example, My sent Gmail email messages.
Set the Apply filter when field to "FROM" field.
Type the Gmail webmail address into the Contains field. For example, <user name>@gmail.com>.
Select the radio button beside Do not forward messages to device.
Click Add Filter.
Note: After creating this filter, email messages will not be received on the BlackBerry smartphone if sent from the Gmail webmail account.
Source: KB10332 (with graphical depiction)
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
Every time I do all the steps to reset the questions the only problem I have is that I noticed in the link to reset them using an email the email in the link don't match the one I created my account with. Does anyone know how to fix this problem?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to upadte your rescue email address for potential future use -
while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I've been editing images with ease for a long time but now the changes are not being saved.
I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Hi...
My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
Waiting for your reply... Thanks and regards...
Turgay Kala
General ManagerUnfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
Here is a list of Apple contacts; there is no email address - you will need to write a letter to their corporate headquarters or call them:
http://www.apple.com/contact/
Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs. -
Need to send my back up email a reset security questions email but the option does not show when I click on password and security
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456) -
E-mails sent from PC users the photos are not present
When opening some e-mails sent from PC users the photos are not present anyone have the same situation.
I have not had such a problem. Is the size of the message sufficient to actually contain photos, of might this be a case of embedded links to images on remote servers?
Under the headers, is there any list of attachments?
Ernie
Maybe you are looking for
-
Having problems opening up a raw file in photoshop elements 11
unable to open a raw file in ps elements 11
-
High-units reflect twice the amount with dual JVM's in a distributed cache
HI all, I have a question - i have a near cache scheme defined - running 4 JVM's with my application deployed to it (localstorage=false) - and 2 JVM's for the distributed cache (localstorage=true) The high-units is set to 2000 - but the cache is allo
-
REF CURSOR problem .. function call from select
Hello, I am still on the search for a way to call a function from with in a select statement. I've done it in SQL*Plus like this and it works. SELECT name, f_format(name) FROM user WHERE id = 12; This returns first the unformatted (raw) version of th
-
Users need to add Projects into Planning. I know they can if they create a Application Type "Projects Financial Planning"... The problem is we are developing a "Public Sector" Application Type. What are the ways I can move metadata, "new Projects",
-
Accessing FAT32 external USB Drive via web server for streaming of content
Hi all I've read a post about streaming music from my mac via wifi to my iPhone 3g. It involves enabling the webserver, adding a symbolic link to my music directory and then browsing to the webserver using safari on my iphone. I've enabled the webser