Need abap documenation specifically for SAP BW only.

Hi,
I want to learn abap specifically for SAP BW only...How much abap should i know to do bw work....and where i can find documentation of abap related to sap bw 3.5 and 7.0 version.
Regards
Yogee.

HI
generally we used the ABAP code to write Start Routines, End Routines or Individual Update Routines also exits which include variable exits.
If you are totally unaware of the programing languages then better start learing ABAP with basic statements includes IF ELSE LOOP CASE ENDCASE etc.
And then switch to learn how to use this statement to develop the logic.
In BI, the basic knowledge of ABAP is sufficient, u need not go for deep and detail study, belive me its easier than BI.
Go to ABAP forum check for any good ABAP learning materail and start working on that.
Any query please revert back. send ur mail id to me, if possible ll send u some document for ABAP.
Thank-You.
Regards,
Vinod

Similar Messages

Software requirement specifications for SAP BW

Hi,
Please list the software requirement specifications for
SAP BW.
Thanks,
Vijaya.

Hi,
   I havent come across any links on that yet. But, you can get some understanding on what it will contain...
1. The purpose of this doc. is to specify all the features thatthe customer expects out of an application.
2. There are 2 docs. relating to this
   1. AS-IS document and
   2. TO-BE document.
   AS-IS document describes how the existing system is. This contains features , advantages, disadvantages of the existing system.
   TO-BE document will contain the features that the customer is expecting in his new application. There will also be a GAP analysis document that will describe the gap between the existing and the proposed system. This will help them in estimating the efforts needed and the posrtions in the new application to be built.
   Finally, as u might know, the Requirements doc. needs to be signed.
Thanks,
Raj

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

Hi,
Login to http://service.sap.com/swdc using your S user-id
Serach for kernel
Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
Regards,
Rajneesh

Need ABAP table/Report for getting trace of error messages

Hi experts,
My requirement is to display Detailed Error trace text of the error message, on my screen.
Now i need to know, which tables in XI it is stored or is there any abap report available that can provide thsi information.
any function module ??
thanks in advance for your help.
Regards,
Priyanka

Hi,
Check these out.
http://wiki.sdn.sap.com/wiki/display/XI/XI+Tables
Cheers,
Earlence

Need to populate value for a KF only once for a combination of characterist

Hello All,
We had a requirement for a report. wherein we need to consolidate the data of the 0FI_GL_4 datasource and a custom table.
both these sources have only 4 fields in common i.e Fiscal Year/Period; Company Code and Pool
in the custom table, for each fiscal yr/period & Pool combination, there is a unique Plan value available.
To consolidate the data, I wrote a routine in the transformation to extract data from the custom table based n the combination of Fisc yr Period, Comp Code & Pool.
However, since 0FI_GL_4 has more than 1 entry for the above mentioned combination that is GL_accounts, document number, etc; during extraction, my plan value is being extracted multiple times to the cube and hence for a fiscal yr/period, cube shows a summation value.
I want the plan value to be picked only once.. please advice

Hi Sneha,
As I understand in your infocube along with the primary key of custom table one more field exists e.g. Document number and due to which the value is getting repeated over multiple lines.
Though all these records are valid but when you are running report on this cube without document number all the plan values are getting aggregated, again this behaviour is also correct.
For your reporting purpost I feel that you need to extract data from the custom table in other data target and then do the reporting on that, wherein the plan value will not be repeated.
Regards,
Durgesh.

External catalog specifications for SAP E-commerce 5.0

Hi Experts,
We want to integrate external catalog ( which is custom deveponed by our client.). Using OCI interface we want to use this custom based catalog, in place of SAP ISA TREX based catalog. In ISA settings I just see that I need to define the url for the external catalog. BUT this external catalog should confirm to certain rules, Please can someone guide me, what are these set of rules?
Please help, as this is a very critical bottle neck for our project.
Thanks in advance,
Dipender Singh

Hi Dipender,
The catalog must be OCI compliant in order o use it in conjunction with the SRM Server, compliance in a nutshell means that it will transmit it's return data in the format expected by SRM, the HOOK_URL will contain all the necessary parameters to transmit the HTML data into an expected an readable format for ICI INterface.
For more details please read the attached OCI Config doc.
Regards,
Jason

Need to apply payment for delivered items only, not full down payment

Version: (8.8 PL18)
Description of requirements: (Be able to handle the right amount of down payment when we copy a sales order to an invoice and there is a back order for some items. It actually works fine when we go on an invoice and we copy from a sales order, the system handles correctly the down payment amount when there is a back order. )
Valid as of: (29/07/2011)
Business needs: (They need to apply only the part of the payment for the delivered quantities, not ALL the payment. In addition, the risk of errors to choose the wrong order is higher when you use the u2018copy fromu2019 function)
Examples: (When you create a sales order with a down payment and you copy this document to an invoice and there is a back order, the amount of down payments should be adjusted according to the back order as it works now for the u2018copy fromu2019 function)
Current Workaround:
(We use the u2018Copy fromu2019 function.)
Proposed solution:
(The u2018Copy tou2019 function should work exactly as the u2018Copy fromu2019 function)

It's not just a licensing requirement. Without the RIKLA you cannot make Reader plug-ins at all. Adobe will vet your proposal and decide if they will permit it, and what license fee you will pay.

Download of ABAP Support Packages for SAP Netweaver PI 7.1

Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.

Solved by SAP Walldorf.

Need info on eligibility for SAP teched 07

Hi,
My company is in the process of getting SAP implementation partnership.
I would to know if we are eligible for teched 07.Is it possible to apply now and keep the option open as we are expecting the implementation partnership soon.
Thanks,
Sriram

Hi Sriram,
Yes, SAP TechEd registration is open to SAP customers, prospective customers, partners, prospective partners, consultants, employees, and members of the press, analyst, and blogger communities.
We hope to see you at SAP TechEd '07!
Kind regards,
Diane Davis

Need data retrieval recommendations for the UK only please

Hey folks.
I just wanted to say that I had a problem with strange sounds off my hard disk, the lengthy restarts and problems waking up the computer after battery being empty and finally my hard disk died completely.
With 17 months under its belt this Hitachi 80GB hard disk ought not to have died but this happens. Sadly I was ABOUT to back up (isn't that always the way?) but had not managed (due to the problems) and so lost some EXTREMELY valuable data. ie photos (numbering 400 and about 600 others) of my grandfather who was taken into hospital for heart failure aged 91 on the VERY SAME DAY.
Now- I am NOT letting this hard disk go. I have been told by the kind but very slow (Apple took over a fortnight to send them a replacement disk and they had it for 16 days in the end- I went mad) folk who repaired it, it is the mechanism which failed and not the platters which melted or otherwise warped.
So- this means that the chances of data retrieval are high. BUT- I have had one quote from the firm they recommended and was told it could be as much as £1,300 on the slowest service. Now, as you will appreciate, there IS no value which can be placed on such precious things as memories of a loved one but SURELY there is a chance that someone here has knowledge of a more- erm- cost efficient method?
LOOOOONG story short: Can you recommend anyone in the UK area who does a good job retrieving data from what has been deemed a high probability recovery?
Anything I need to know about the subject? All I can tell you is that this WILL involve removing the platters from the mechanism and placing them to another, functioning one with the probability of needing to back up in the region of 20GB.
Your help in this is so very gratefully received. I am thankful you users are here to hold my hand on this.

Posted this under the correct header as well- 15 Powerbook. Resolved it myself- went on the net and just picked one. Was semi-successful and if you are needing info check it out- I have explained this there.

Do you need physical hardware specifications for virtual machine

I am currently running VMware Server 2.0. I am working with a server whos hardware specifications cannot support Windows Server 2008. My question is should I still be able to create a virtual Windows Server 2008 under VMware since all the hardware should be virtualized.

Bigpantha wrote:
So why is it that I get the error “Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode.”
Your physical CPU/motherboard either does not have the required hardware features, or does not have them enabled.

Do I need Management Data Warehouse for SAP on SQL?

Hi experts,
I am reading Jonathan Kehayias's wait statistics guide and I see he talk about Management Data Warehouse. Should I use Management Data Warehouse in SAP on SQL environment? I see many monitor objects are already implemented in DBACockpit.

Hi Dennis,
In case you have your SAP system on MSSQL, you can definitely use Management Data warehouse
to streamline performance troubleshooting.
SQL Server 2008 Management Data Warehouse
Hope this helps.
Regards,
Deepak Kori

I need a quicktime player for browsing webpages ONLY

I would perfer to use the apple player, but they no longer provide it without iTunes, which I am not allowed to install on the corporate laptop.
So, what is the best alternate player?
IBM Thinkpad T-40 Windows XP Pro

Oh, I just saw in another thread that Quicktime IS available without iTunes!
I had 1st asked Apple Support and they claimed that it is NOT available without iTunes.
Doh!

RDS for SAP data migration through IDOC's

Dear Experts
Just now we have installed BODS 4.1 and RDS also installed now. I am in the process of exploring the RDS. I found all the migration objects is available in the form of IDOC's. Now my questions are
How to work on custom IDOC's. Do i need to extensively code on R/3 side to upload the custom fields. Like user exit or BADI for custom fileds
If yes then i would say implementation time through RDS will remain more or less same time.
Through BODS or by RDS migration objects is there any way without coding on ABAP R/3 side, Can we achieve migrating custom fields
Please let me how to achieve above requirements by RDS
Thanks
Vijay Mukunthan

Hi Vijay,
You are right, the standard content of the Rapid Data Migration RDS packages brings the content with the standard IDoc interface for SAP standard only. So custom objects are not pre-built with the package. However, we incorporated the foundation to include custom coding as easy as possible:
1) IDoc
We are using the standard interface technology IDoc. IDocs do have an enhancement concept which is described in the online help. There are three main cases and all of them are supported, however two need additional coding:
Z-fields: Additional fields in existing tables lead to IDoc segment extensions
With the IDoc segment versioning concept this is easy to realize without any ABAP coding
Z-tables: Additional IDoc segments will be necessary and lead to a new IDoc version
With the IDoc versioning concept you can easily add Z-segments with leveraging provided user exits
Custom business objects:
You can even create a complete own IDoc message type in Z-namespace for own stuff, leveraging the given ALE layer of the IDoc middleware
2) Enhancement guide
With the RDS package we offer an enhancement guide which helps you to modify the jobs and data flows in the SAP Data Services content according to the changes in the target IDoc structure to reflect additional fields and tables. We built it as a step-by-step guide following for a sample IDoc type but will work similarly for any IDoc.
Best regards,
Frank Densborn.

Setting legend layer attributes for SAP Bar Chart Graphics

Hello!
I'm using the SAP Bar Chart for displaying a calendar which is easily printable.
Because the chart contains lines with colored layers without text I need to show a legend at the bottom of a printed page.
I am using the CALL FUNCTION 'BARC_SET_LEGEND_ATTRIB' for setting up the legend and CALL FUNCTION 'BARC_ADD_LEGEND_NODE' to add the nodes/layers and texts to the legend.
The only problem is that the width of each layer displayed in the legend in very narrow. Only ten letters are shown for each legend entry and this is not enough to display the meaning of my colored bars in the chart area.
I tried changing layer-values in the bar chart customizing ( /ocng ) but nothing helped to make the legend entries wider.
Does anyone have an idea?

Hi,
Try this link
[http://help.sap.com/saphelp_40b/helpdata/fr/52/670cd2439b11d1896f0000e8322d00/content.htm]
You can find sample SAP reports for graph and graphics
[http://www.erpgenie.com/sap-technical/abap/sample-codes-for-sap-graphs-a-graphics]
Ben.

Need abap documenation specifically for SAP BW only.

Similar Messages

Maybe you are looking for