Need administrator rights to save vi's

Hi,
in our department we've installed some computers with LabVIEW 7.1 and did an upgrade to 7.1.1. After the upgrade mass compiling was started. The problem now is that when a normal user (with non administrational rights) wants to use LabVIEW he/she gets asked if some certain vi's (subvis) shall be saved. But because he/she hasn't got administrativ rights this fails. Unfortunately in order to get to work with the simluation toolkit, LabVIEW needs to save some vis. Otherwise imprting of Simulink models will fail. Who can I solve this problem. Giving the normal user write access to the NI-Program folder is NO final solution since the computer pool is used by various students.
Thanks for the help,
Dietmar Winkler

You may also need to allow access to certain libraries, as discussed in this thread.
As mentionned in my previous reply, you can set individual privileges (Control Panel -> Administrative Tools -> Local Security Policy) so that users can "load and unload" device drivers, vi's etc. Since the PC is shared, you may have to create a common folder that can be accessed by everyone. Humm... actually, you may not want that either..
Here is what NI has to say from their Knowledge-Base: click here
Hope this helps.
JLV

Similar Messages

Can't install ; i need administrator rights that i have

Hello,
I tried many time to install Air but I always failed...
They keep telling me that I need administrator rights, but I have and i launch the installation with them.
I tried many ways (like using this as told : http://support.microsoft.com/mats/Program_Install_and_Uninstall/en-us but it didn't work as well, the program is uninstalled - I need to install it again -, and it doesn't appear on the installation programs...) and searched everywhere but without success ; that's why I finally decided to ask here.
Thank you for your help.
Shisma.
Here is the Install.log :
[2013-10-07:23:01:32] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:01:32] Commandline is:
[2013-10-07:23:01:32] No installed runtime detected
[2013-10-07:23:01:42] Relaunching with elevation
[2013-10-07:23:01:42] Launching subprocess with commandline c:\users\shisma\appdata\local\temp\air46a1.tmp\adobe air installer.exe -ei
[2013-10-07:23:01:43] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:01:43] Commandline is: -stdio \\.\pipe\AIR_3504_0 -ei
[2013-10-07:23:01:43] No installed runtime detected
[2013-10-07:23:01:43] Starting silent runtime install. Installing runtime version 3.8.0.1430
[2013-10-07:23:01:43] Installing msi at c:\users\shisma\appdata\local\temp\air46a1.tmp\setup.msi with guid {0A5B39D2-7ED6-4779-BCC9-37F381139DB3}
[2013-10-07:23:01:44] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:01:44] Rolling back install of c:\users\shisma\appdata\local\temp\air46a1.tmp\setup.msi
[2013-10-07:23:01:44] Rollback complete
[2013-10-07:23:01:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:01:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:01:44] Runtime Installer end with exit code 7
[2013-10-07:23:01:45] Runtime Installer end with exit code 7
[2013-10-07:23:26:37] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:26:37] Commandline is:
[2013-10-07:23:26:37] No installed runtime detected
[2013-10-07:23:26:42] Relaunching with elevation
[2013-10-07:23:26:42] Launching subprocess with commandline c:\users\shisma\appdata\local\temp\air3958.tmp\adobe air installer.exe -ei
[2013-10-07:23:26:44] Runtime Installer begin with version 3.8.0.1430 on Windows 7 x86
[2013-10-07:23:26:44] Commandline is: -stdio \\.\pipe\AIR_4868_0 -ei
[2013-10-07:23:26:44] No installed runtime detected
[2013-10-07:23:26:44] Starting silent runtime install. Installing runtime version 3.8.0.1430
[2013-10-07:23:26:44] Installing msi at c:\users\shisma\appdata\local\temp\air3958.tmp\setup.msi with guid {0A5B39D2-7ED6-4779-BCC9-37F381139DB3}
[2013-10-07:23:26:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:26:45] Rolling back install of c:\users\shisma\appdata\local\temp\air3958.tmp\setup.msi
[2013-10-07:23:26:45] Rollback complete
[2013-10-07:23:26:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:26:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:26:45] Runtime Installer end with exit code 7
[2013-10-07:23:26:49] Runtime Installer end with exit code 7
[2013-10-07:23:27:17] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:27:17] Commandline is:
[2013-10-07:23:27:17] No installed runtime detected
[2013-10-07:23:27:20] Relaunching with elevation
[2013-10-07:23:27:20] Launching subprocess with commandline c:\users\shisma\appdata\local\temp\airdac5.tmp\adobe air installer.exe -ei
[2013-10-07:23:27:20] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:27:20] Commandline is:
[2013-10-07:23:27:20] No installed runtime detected
[2013-10-07:23:27:21] Runtime Installer begin with version 3.8.0.1430 on Windows 7 x86
[2013-10-07:23:27:21] Commandline is: -stdio \\.\pipe\AIR_7056_0 -ei
[2013-10-07:23:27:21] No installed runtime detected
[2013-10-07:23:27:21] Starting silent runtime install. Installing runtime version 3.8.0.1430
[2013-10-07:23:27:21] Installing msi at c:\users\shisma\appdata\local\temp\airdac5.tmp\setup.msi with guid {0A5B39D2-7ED6-4779-BCC9-37F381139DB3}
[2013-10-07:23:27:23] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:23] Rolling back install of c:\users\shisma\appdata\local\temp\airdac5.tmp\setup.msi
[2013-10-07:23:27:23] Rollback complete
[2013-10-07:23:27:23] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:23] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:23] Runtime Installer end with exit code 7
[2013-10-07:23:27:23] Runtime Installer end with exit code 6
[2013-10-07:23:27:24] Runtime Installer end with exit code 7
[2013-10-07:23:27:29] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:27:29] Commandline is:
[2013-10-07:23:27:29] No installed runtime detected
[2013-10-07:23:27:30] Relaunching with elevation
[2013-10-07:23:27:30] Launching subprocess with commandline c:\users\shisma\appdata\local\temp\air223.tmp\adobe air installer.exe -ei
[2013-10-07:23:27:31] Runtime Installer begin with version 3.8.0.1430 on Windows 7 x86
[2013-10-07:23:27:31] Commandline is: -stdio \\.\pipe\AIR_2752_0 -ei
[2013-10-07:23:27:31] No installed runtime detected
[2013-10-07:23:27:31] Starting silent runtime install. Installing runtime version 3.8.0.1430
[2013-10-07:23:27:32] Installing msi at c:\users\shisma\appdata\local\temp\air223.tmp\setup.msi with guid {0A5B39D2-7ED6-4779-BCC9-37F381139DB3}
[2013-10-07:23:27:33] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:33] Rolling back install of c:\users\shisma\appdata\local\temp\air223.tmp\setup.msi
[2013-10-07:23:27:33] Rollback complete
[2013-10-07:23:27:33] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:33] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:27:33] Runtime Installer end with exit code 7
[2013-10-07:23:27:37] Runtime Installer end with exit code 7
[2013-10-07:23:29:54] Runtime Installer begin with version 3.8.0.1430 on Windows Vista x86
[2013-10-07:23:29:54] Commandline is:
[2013-10-07:23:29:54] No installed runtime detected
[2013-10-07:23:29:56] Relaunching with elevation
[2013-10-07:23:29:56] Launching subprocess with commandline c:\users\shisma\appdata\local\temp\air3cd1.tmp\adobe air installer.exe -ei
[2013-10-07:23:29:57] Runtime Installer begin with version 3.8.0.1430 on Windows 7 x86
[2013-10-07:23:29:57] Commandline is: -stdio \\.\pipe\AIR_3356_0 -ei
[2013-10-07:23:29:57] No installed runtime detected
[2013-10-07:23:29:57] Starting silent runtime install. Installing runtime version 3.8.0.1430
[2013-10-07:23:29:57] Installing msi at c:\users\shisma\appdata\local\temp\air3cd1.tmp\setup.msi with guid {0A5B39D2-7ED6-4779-BCC9-37F381139DB3}
[2013-10-07:23:29:58] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:29:58] Rolling back install of c:\users\shisma\appdata\local\temp\air3cd1.tmp\setup.msi
[2013-10-07:23:29:58] Rollback complete
[2013-10-07:23:29:58] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:29:58] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-10-07:23:29:58] Runtime Installer end with exit code 7
[2013-10-07:23:30:53] Runtime Installer end with exit code 7

Make sure you are installing iTunes from here: http://www.apple.com/itunes/download/
If that fails, follow this and try again: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support

Itune needs administrator rights to install updates in win xp sp 3

I have an issue with ITunes application with user profile and administartor profile. ITunes needs administrator right to install updates.
Under normal user profile , ITunes not able to install any updates.
It required manual works from administartor to run the application as "Administrator". Application level permission ( itunes.exe ) has full rights to the user,
but still ITunes needs administrator rights.
Please advise on how to install iTunes updates without Administrator rights.

It can't find the uninstaller. Use Revo uninstaller for the PCSuite and all Nokia related driver software and clean the registry with Ccleaner.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I have installed Firefox 5.0.1 and need administrator rights to run it and have lost my list of bookmarks.

Recently, I upgraded to Firefox 5.0.1. I now require administrator rights to run it. If I start Firefox with ordinary user rights, I am presented with an error message which says that sqlite3.dll is missing from my computer. This file is actually present in three locations on my computer. However, Firefox runs if I start it with administrator rights.
The spell checker no longer works, my list of bookmarks, which was quite extensive, has now disappeared. Also, my history has disappeared too. A security package which I used when
accessing my bank account has also disappeared. This was called Rapport.

Do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

WINRAR NEEDS ADMINISTRATIVE RIGHTS TO UNZIP FILES

I have domain network consisting windows 7 professional 64 bit as clients and windows server 2008 standard and 2012 as servers. My problem is when standard users try to open files zipped in winrar software. They need administrative privileges. Can anyone
guide me. How standard users can directly access winrar software.

Hi Saleem,
With a standard account, you can do almost anything that you can do with an administrator account, but if you want to do something that affects other users of the computer, such as installing software or changing security settings.
Since the developer of this tool designed to run this tool with administrator privilages, there may be some security factors included .You may need to look for help from the Winware forum for help.
Best regards

Do i need administrative rights to connect to AD through LDAP

Hi all,
I am trying to connect to the Active Directory through LDAP.But it always says Connection Refused/Communication Exception.
The only operation i m doing is to connect to the server & trying to find the available Users.DO I NEED A ADMINISTRATIVE PRIVILLEGED USERNAME TO CONNECT TO THE SERVER.
Is there any particular way to connect to ActiveDirectory,Please lemme know.
Thanks in advance,
KSK

http://support.apple.com/kb/ht1274

Business Objects XI 3.1 Administrator rights

Hi:
Could someone tell me or point in the right direction for determining if any, or which Business Objects desktop application may require the user to be part of the sytem administrator group? Currently running BO 6.5 Supervisor and Recipient Manager modules, among others but we will soon be upgrading to Business Objects XI 3.1 - I know we need administrator rights to install so I'm onl asking about running the applications - thanks

Hi Darlynn,
administrator rights (on OS side) are not required in order to run most BOBJ dekstop applications (e.g Universe Designer, rich WebI client, DeskI client). Still you have to take care eventually of firewall issues if you have a firewall between your server and your clients.
Please make also sure that the users have write access to the temp directories used by the tools e.g. Universe designer.
You may have some issues with the Import Wizard though since it requires write access to it's installation directory (this is where its temp directory resides). That was at least the case in XI R2.
The Import Wizard is not every user's tool though.
Regards,
Stratos

Administrative rights to Windows Server

I know that we need administrative rights to a window box during
installation and configuration.
After cutover to production, is it possible for the DBA to survive if
administrative rights are revoked?
What daily/often-run tasks will be affected?
Thanks for any suggestion.
PS (Our system admin has taken away admin rights from the DBA, so far, we
are able to identify 10 problem areas, but all of them have workaround/fixes
of some sort).

There's difference between Local and Domain user in windows environment.
Local user with ORA_DBA should be able to do most Oracle administrative tasks.
However, Oracle DBA account is usually given local administrator privilege on the server.
Check more information in metalink doc Note:77665.1

Just loaded iCloud on my mac. When i click on my ical in my dock, it will not let me edit. It says I need admin. rights.

I just upgraded to Lion 10.7.2 so I could use Icloud. However, I am having a problem with the calendar synching.(I am using an iphone). When I click on the ical at the bottom of my screen, it will not let me edit anything. It says I need administrator rights. When I go to the wwwicloud on the web, that calendar is synched. How can I sync and edit in my ical that came with the computer?

Dale,
Try the steps listed in iCloud: Troubleshooting iCloud Calendar.

Application administrator rights to update penny version 10.1.8

hello, I have a problem about Adobe reader.
since I will migrate my workstations to Windows 7, Adobe reader application administrator rights to perform the update 10.1.8 update.
This concern is not present in Windows XP.
obviously, I can not put all my users as administrator of their position.
someone he knows a solution to this problem?
thank you

Dear Pat, thanks about your aswer.
Yes, I know if I want to Adobe reader, on XP or Win7, I need inevitably Aministrator right.
but, normally, it seems to me there doesn't need administrator right to install the update for Adobe, and this is my probleme. if one of my users, want to install an upgrade, administrators right are ask.

Cannot update itunes keeps saying need admin rights.

I've tried to update itunes and it keeps telling me I need administrator rights to update itunes. Any ideas?

You may have had an autoupdate from Norton since then that changed things. Check your preferences in Norton and make sure you are not scanning the iPod or songs. Also, if you are manually managing your music, you will have to disable scanning external devices.

Administrator rights required

Hello,
I installed the latest Flexbuilder 3 beta on my company
laptop. Installing went ok, which amazes me because normally you
need administrator rights.
But ones installed I found the same trouble back in the
debugger flash version. We do not have it installed, nor can I
install it because I do not have administrator rights. Is it
possible to somehow get a debugger up and running without the need
for administrator rights required.

How exactly does one give it those file permissions? I suspect this issue may (but may not) be related to switching from one kind of Adobe account to another, let me explain.
This is probably not a very common situation when it comes to the Adobe license. I work for a university, and my department paid for a CC teacher/student edition for me for about 2 years. The university I work for is one of 14 public universities in the Commonwealth of Pennsylvania that are united in something called PASSHE. PASSHE entered into a massive license agreement with Adobe, and so now I qualify for a CC license under this massive license to PASSHE, so I cancelled the individual account that my department had been paying for. Adobe gave me misinformation as to how to switch over my license, to make a long and miserable story short. So...when you say "file permissions" and "user account" are you talking about my user account on my computer, or the Adobe user account? And where, exactly, do I go to enter whichever credentials it wants?

How provide CrystalReports without administrator rights?

Post Author: vtortola
CA Forum: .NET
Hi!
I'm developing a SmartClient application that is deployed with ClickOnce from a web server. The application, use several crystal reports features and I need deploy the needed dlls with ClickOnce.
From my understanding, for install Crystal Reports runtime I need administrator rights, but this mean that the sysadmin must go to each computer and installs it, that isn't posible.
I need deploy the Crystal Reports assemblies or dlls in my application path and know how use it. How I can do it??
Thanks in advance.
Regards.

Thanks for the link, John. It takes me to customer support but they say I need technical support.
While I wait for their office to open, can you provide some details how you or others got around this issue? There are a few tertiary questions I hope to have answered if possible. And since you were te first to reply, I thought you would be best suited for them.
Wha that are your thoughts on the remaining questions?

Start Diadem without Administrator rights

If try to start Diadem 9.1 with the rights of "Benutzer" or "Gast", I get the error message:
"File-Acces Error: 5! ..\Programme\..\Diadem9.1\ must be writeable!"
Simple user has no write acces to path ..\Programme\.. indeed. (Win2000Pro and WinXPPro)
How can a user without administrator right start DIAdem ?
Martin Bohm
[email protected]

You don't need administrator rights to launch DIAdem 9.1!
Just during the installation and the first DIAdem launch it is necessary to have administrator rights. After this simple user rights are enough.
But DIAdem needs access to the Windows temp path (that's standard) and needs access to the files "Desktop.ddd" and "Userpar.par" as well as to the folders where you would like to store you files created by DIAdem.
On NTFS partitions you typically don't have write access on the Windows program folder. But therefore you can launch DIAdem with the parameter /d to specify where your desktop file is stored e.g. c:\program\...\DIAdem.exe /dD:\MyDIAdemKonfigPath\Default.ddd
Greetings
Walter Rick

Need to provide local administrator access without domain administrator rights

Hi All,
I need to provide local admin access to one account in windows environment without providing domain administrator rights.
Windows 2008 DC. Desktops : windows 7
So that we can use this account to install agents like SCCM\SCOM in all servers & desktops.
Need suggestions.

Hi,
I agree with Senne, in addition, we can also use net command to perform local group management.
More information for you:
Add a member to a local group
http://technet.microsoft.com/en-us/library/cc772524.aspx
How to Make a Domain User the Local Administrator for all PCs
http://social.technet.microsoft.com/wiki/contents/articles/7833.how-to-make-a-domain-user-the-local-administrator-for-all-pcs.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Need administrator rights to save vi's

Similar Messages

Maybe you are looking for