Need clarification for Quarter....( Can Q1 start from DECEMBER )

Friends..
I need a clarification regarding the QUARTER 1...
instead of JAN,FEB,MAR can a Quarter 1 (Q1) start from DEC,JAN,FEB ...
Q2 --MAR,APR,MAY ..etc....
Is there any possible ways to do this ..
Thanks in Advance
BASKAR

Hi Baskar,
Yes, its feasible.
However you need to map your 0CALMONTH to your 0CALQUARTER, then write this routine.
DATA : MY_VARSPMON(6),MY_VARYEAR(4),MY_VARMON(2),MY_VARQUARTER TYPE /BI0/OICALQUARTER.
    MY_VARSPMON = SOURCE_FIELDS-SPMON.
    MY_VARYEAR = MY_VARSPMON+0(4).
    MY_VARMON = MY_VARSPMON+4(2).
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = MY_VARMON
      IMPORTING
        OUTPUT = MY_VARMON.
    IF MY_VARMON = '01' OR MY_VARMON = '02' OR MY_VARMON = '03'. MY_VARYEAR = MY_VARYEAR - 1.
      CONCATENATE MY_VARYEAR '2' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '04' OR MY_VARMON = '05' OR MY_VARMON = '06'.
      CONCATENATE MY_VARYEAR '3' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '07' OR MY_VARMON = '08' OR MY_VARMON = '09'.
      CONCATENATE MY_VARYEAR '4' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '10' OR MY_VARMON = '11' OR MY_VARMON = '12'.
      CONCATENATE MY_VARYEAR '1' INTO MY_VARQUARTER.
    ENDIF.
    RESULT = MY_VARQUARTER.
I don't guess there's any changes in particular; but you may considerably change as per requirements in the ABAP logic.
Thanks,
Arun Bala
Edited by: Arun Bala G on Jul 16, 2010 7:11 AM

Similar Messages

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key...

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key... or The D-Key for Apple Hardware test or run with the shift Key in Safe Mode!!!
About a week ago I started to have problems with the Mac after 10.5.6! First the Mac after shut down would restart on its own in 10 to 15 minutes. I read in various forums about some of the 10.5.6 problems. I did a clean reinstall where the Mac created a previous system folder. After this suddenly mail, I-Chat as well as some other programs would open, then close immediately! Since I did not have things backed up because I didn't have a large drive, I dragged my files and apps to another drive and reformatted the drive zeroing out all data and did a fresh new install then brought in the combo 10.5.6 update.The Mac is running correctly but I can't Zap the P-Ram, startup from the Mac OS X installer Dvd with the C key or run Apple Hardware Test with the D key or boot in safe mode with the shift key. I can boot any of the Bootable disks from the start-up Disk in Preferences.
I went over this with Apple and they suggested I run the Apple Hardware test. It won't run on this machine because I can't boot it with the D- Key. I ran tech Tools and every single thing checks out OK! This Mac has worked great since I got it in I believe Feb or March of 2007.

Make sure that you don't have firmware password protection enabled. It will prevent some boot key shortcuts from working, like clearing NVRAM, etc. You can disable firmware password protection by booting off the OSX DVD and loading the utility.

Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago. Proglamet says that the computer does not support Power PC. Help

Hey. I have a problem. I updated my mac os x to 10:8 for I can not start Acrobat Pro, which I bought six months ago.
Proglamet says that the computer does not support Power PC. Help
When I try to start it says (program "Acrobat 6.0.2 Professional.app" can not open because PowerPC applications are no longer supported.)
Please help

The version of Acrobat you have is a PowerPC application and will not run on Mountain Lion. You will need to upgrade/purchase an Intel version of Acrobat Pro, probably Version 9.
It might have been worth checking to see if the apps you run are supported on ML before upgrading. If you backed up your system before the upgrade you could always revert to your previous level.

I need to know which country imei starts from 01254300

I need to know which country imei starts from 01254300
plzz. help me

read this?
http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity

ICal: how can I start from scratch?

I'm having recurring and persistent problems with iCal since I bought a new Mac Pro and migrated my user files from my previous computer (G5, which was also running Leopard).
At first, alarms weren't working. I read several threads here and went through a lot of troubleshooting and finally got that working again.
However, iCal is still very slow and buggy. For example, when I create a new to-do and click on the "due date" checkbox, it takes about 10 seconds for the check to appear. The spinning beachball is a frequent sight, and everything from creating new events to setting due dates and calendars takes five times longer than it used to when I was using iCal in Tiger.
I created a backup of my iCal file, and manually exported my calendars for extra protection. Then I used AppZapper to completely uninstall iCal and all related files, and I used Pacifist and the OS X DVDs to reinstall iCal. Then I imported each calendar individually.
This didn't work. iCal is still so unresponsive it's almost unusable. If there were another alternative out there that worked with my iPhone and other applications that sync with iCal, I'd be using it. But because I depend on those other apps I'm stuck with iCal, and I need to make it work.
Is it possible that one of my calendars is corrupted and causing problems? What else can I do to find out where the problem lies?

Harlan83,
to start from scratch, you’ll need the pair of model-specific grey installation DVDs which originally came in the box with your MacBook Pro. You can purchase a replacement pair of DVDs for your model MacBook Pro from either Apple or iFixit.

1)Problems with Fusiondrive 2) Can't start from USB-Stick to repair

I have a big problem witn my self created fusion drive on my macbook pro. For weeks it worked fine and fast. But since the last week more and more errors ocured, such like stopping com.apple.medialibrary service etc. The system ran hot and hanged sometimes or shut down suddenly..
Now, it won't start anymore.
Following message appears after turning on:
panic(cpu 0 caller 0xffffff7f93075b65): *This LVG was created before the fix for <rdar ://11023142>,you must recreate your LVGs"@/SourceCache/CoreStorage-380/core/btree/btree_impl .h:55
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Adress
....followed by somelines of hex-adresses and further error mesages corresponding to the LVG-Problem...
I tried to start from my mavericks-usb-Stick, which works on my second Macbook (nearly the same settimg) fine and without problems. I pressed the "alt"-key while system start and could choose the stick as startup medium.
But after a few seconds the same error messages appear... The system won't start.
So I can't reformat and create a new Fusion drive. I have erased the NVRAM, which solved the problem, that the startup chime was missing...
I tried also to start with cmd+R, but the errors stayed the same...
Please is there anyone who can give me a hint. I need my macbook and I have only today a little time to fix it...
Thank
Mike

Thank you for your answer. I have put me internal DVD in an external case to make place for the hard disk (the ssd is at the old place of the hard disc).
I can't choose the externalDVD to start when I press "alt"-key...
Any other idea?

Need clarification for MRP Run

Dear SAP Guru,
Need the clarification for MRP Run:
1.At the time of MRP Run what is the status function for - shipping notification?
2.First i have run the mrp planning mode is normal after that i have some changes in material master , so planning mode is - RE Explode planning & Bom ? AT THE TIME OF MRP RUN it is correct
3.In background MRP Run at MDBT - what is the PLANNING MODE ?
4. How will work on automatic PO Create through MRP Run PR\S.?
Kindly give me the feedback , i am waiting for your reply.
Thanks,
Uma

Hello Uma
1 - A shipping notification is a confirmation from the vendor that the material has been shipped.
2 - When you change your BOM or material master MRP settings, system automatically set a flag on the planning file to re-explode the BOM. Therefore, MRP automatically re-explode the BOM, even with planning mode 1. Planning mode 2 is only necessary when you need to force a new BOM explosion and I don't recommend you to use it frequently, as it may lead to performance issues. See my document MRP: Why shouldn’t I use planning mode 3 on a productive system? for more details.
3 - See notes 206666 MRP: Control parameters during planning and 135788 - Planning mode in material requirements planning.
4 - MRP does not create or change purchase orders or production orders. MRP can only create planned orders, purchase requisitions or schedule lines.
At last, I wrote the following document with links to the MRP FAQ notes, which may be helpful to you:
MRP: Frequently Asked Questions
BR
Caetano

I can not start from my catalogue

When I started Lightroom today It could not find the catalogue. Could some body tell me how to find it? Or if I can start from the backup, where is the backup located?

Did you move the catalog file (perhaps accidentally)?
Have your operating system search all of your hard disk(s) for files whose name end with .LRCAT, then double-click on each catalog found to open it.
You need to know where your backups are located ... you should not depend on having strangers across the internet know where your backups are located, because we don't know.

Can't start from cd with 10.6.8

Ran "verify disk" from the Disk Utilities; found errors and the instructions say to boot from CD. I put my original Snow Leopard CD in the drive, re-start, hold down the "c" key (from my one and only OEM Apple keyboard which is wireless with good batteries). It will not start from CD.
This a completely stock iMAC 2.8 GHz Intel Core 2 Duo with 2GB 800 MHz DDR@ SDRAM.
I have tried restarting while holding the "c", again while holding the "control" again while holding the "command" key, again while holding the "option" key, and again while holding the "shift+c" keys. Nothing works.
The CD is fine, I can run anything I want from the drive after the machine is booted. I noticed in another post where a tech suggested installing a wired keyboard just for this procedure but I don't want to buy a keyboard just for this purpose, and I don't have any friends with wired keyboards to borrow, they all have PC's.
Please advise, I just want to run the "verify disk" utility to clean or repair my drive.
Thanks in advance.

As a techie I keep both a wired keyboard and mouse in my tech kit. However there's a workaround for you since you can boot using your computer's hard drive. Put your DVD in, open the System Preferences, and select the Startup Disk tab. Now select the DVD and restart. Once you've fixed your computer, return to the Startup Disk tab and make your hard drive the startup disk again.

Can't Start from Install disk or external Hard Drive

I've installed an operating system on a external WD 120Gb hard drive. I am unable to start up from the WD Hard Drive or the Snow Leopard install disk, either by selection them from the Startup disk or by pressing 'OPTION' at startup. Every time one of these is selected, the computer starts from the MacBook internal hard Drive.
I have installed the operating system on an Iomega 1 Tb external and it doesn't show up on the Startup disk or when I start using the option key.
I have reinstalled the operating system on both the MacBook Pro Hard drive and he 120Gb portable.
I have a 2Gb SimpleTech Dual Pro Drive, which I can see and start up by, using the Option key at system boot.
I have a 500Gb Iomega I am using for my TIme Machine.
I can't figure why I am unable to start up using the Software DVD.

Thanks for the tip. In the end I combined bits and pieces of what I had read on other peope's messages, what worked for me was putting the frozen computer to sleep with the power button and then waking it up with both the mouse and the C key held down at the same time. Individually nothing happened but with both the CD popped out.
Thanks again,
Jason

Need Clarification On Internal tables in Start Routine

Hi,
I have intenal table some IT_A which deletes the requests which are populated in to it.
Now I need to populate requests into IT_A from another internal table like IT_B which are of different structure.
I have three fields in common in both internal tables like RNR,Timestamp n SID with different field names
I Need Clarification that if i move the contents of the three fields to IT_A from IT_B by spcifying these three fields.Will the internal table IT_A deletes the Requests?
Thanks,
Sriram.

Hi Sriram,
As mentioned IT_A deleted the request loaded into it.
if you move the contents of the three fields to IT_A from IT_B by spcifying the three fields after the deletion step for internal table IT_A takes place then it wont get deleted.
But it would be deleted if the the contents are moved before the deletion step takes place
regards,
mahesh

Can firefox exist side by side w/IE? IE is the office explorer but I need firefox for school- can both exist on the same desktop?

My employer uses Internet Explorer, and our infoweb is on that homepage. I need firefox for graduate school. (My home internet w/firefox is via satellite which won't fully meet the needs). Can I download firefox to my office desktop without removing Internet Explorer? Can both browsers exist "side-by-side"?

Hi,
Firefox can be installed just like any other programs for the Windows OS. The only constraint may be the office IT policy / restrictions. You can download the latest version here: https://www.mozilla.org/en-US/firefox/new/
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

By. i need help for photoshop connective...from 2 days ave a problem of connective.thank you

by i need help for my photoshop connective..if you ceck problem please.

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Desperate for help - stuck on grey apple screen, can't start from dvd

Hi, any help would be very much appreciated. My computer locked up a few times so I restarted and tried to repair permissions but got the message repair failed. I did a restart several times and it would immediately freeze, tried zapping pram but not luck. I was able to boot from the install dvd to try to repair disk but got the error first aid failed.
I was going to resintall the system but now it won't even let me start up from the dvd, it just gets stuck on the grey apple logo screen and the fan seems to be very loud. I tried doing the reset open firmware and also the fscky reset and even tried loggin in as single user but it locked up there also.
Any other ideas? I tried starting by holding Command-Option-Shift-Delete" to bypass booting from the harddrive no luck there either.
I'm a bit panicked since I'm a freelancer on a deadline tommorrow and am really stuck. I do have a time machine backup but can't even start up from dvd to try to do an install.
Thanks in advance!!
JEff

I got it to start up from the DVD finally, but it gave me an error while trying to install the system. I tried disk repair and repair permissions but they are both greyed out. When I click verify disk it gives this error: "filesystem verify or repair failed."
Since its booting from the disk now, i'm guessing its not a power supply issue but I can't think of what else to try at this point. I'm pretty desperate to get this baby going asap so any help would be great, thanks!!

Need clarification for Quarter....( Can Q1 start from DECEMBER )

Similar Messages

Maybe you are looking for