Need help hosting an XE APEX application using a domain name

Hi,
I have a pc with win xp and have installed XP with sp2. I have installed XE and upgraded to APEX 3.1. I have apache 2.2 installed. I have a dynamic IP so I have been using dyndns.org. I have just bought a domain name from 123-reg.co.uk. Now I want to link my domain name to my app.
At the moment my users type http://mydomain.dyndns.com/apex. That open my APEX home page. Ideally I would like my users to type www.mydomain.co.uk and it should default to one of my applications.
1. How do I get apache to redirect to a default application so users can just type www.mydomain.co.uk?
I have the following lines in the config file
<IfModule proxy_module>
ProxyPass /apex http://127.0.0.1:8080/apex
ProxyPassReverse /apex http://127.0.0.1:8080/apex
ProxyPass /i http://127.0.0.1:8080/i
ProxyPassReverse /i http://127.0.0.1:8080/i
</IfModule>2. How do I link my domain name from 123-reg.co.uk to dyndns.com to my local pc?
I sort of got it to work by setting up web forwarding in my domain settting I choi
Non-framed web-forwarding - The destination URL will remain in the browser's address bar
but then the url reverts back to mydomain.dysdns.org instead of www.mydomain.co.uk
Thanks for your help.

Hello,
Non-framed web-forwarding - The destination URL will remain in the browser's address barI wouldn't advise using forwarding, since you have control over the DNS set the DNS to point to your IP address rather than their server, this will have a couple of advantages -
1) You don't incur the 'penalty' of having your users having to go via your hosting companies servers for each request (they communicate directly with your server instead).
2) You will incur less 'pain', web-forwarding can cause quite a few issues depending on your exact requirements (they might not affect you today or tomorrow, but someday down the line you might get bitten by them).
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Similar Messages

Need help in creating a sample application using Oracle I\PM 10gR3.

I am a new to Oracle I\PM 10gR3 and I need a guide to create a sample
application using Filer and a sample Process.
I have searched the net and was unable to find any documents. If any body has
any kind of guide to create an application please let me know.
Waiting for a response.

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Need help in desigining Client/Server Application using Java

Hi,
I am new to Java and no sooner that I started studing it I have been given a project - client server java Application that allows a user to do a property search based on critiras (eg location, price) and display the results. I am stuck because I don't know where I need to start. Have to use IDE (Netbeans or Eclipse) but not sure about dev frameworks.
Can someone give me an outline of what I should do / where I should start? What will be the best solution?
Thanks in adance

http://java.sun.com/docs/books/tutorial/networking/index.html
That's Sun's networking tutorial series. Live it, learn it, love it. You'll need to decide if you want to use connected sockets or datagrams. You'll need details like, can multiple clients connect simultaneously?
The tutorials are the first step though.

Need help in developing a webdynpro application using UWL API

Hi developers,
Iam developing a new WebDynpro application for UWL using UWL API.the functionality is to dispaly the summary of UWL like number of unread items, total items.
Iam getting the problem while deploying the application, iam getting warning while deployed the application.
I have given all possible ways mentioned in the below forum link
Re: Accessing PortalRuntime at runtime?
The exact problem is coming at reference file.
Please giude me how to move forward.
1. Below is the error when given "tckmcbc.uwl~api" in the service entry
deployed with warning :
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application local/UWLCountDemo for startup. Reason=Clusterwide exception: Failed to start dependent service ''tckmcbc.uwl~api'' of application ''local/UWLCountDemo''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
2.Below is the error when i gave PORTAL:sap.com/tckmcbc.uwl~api in the sharing refernce entry
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/UWLCountDemo cannot be started. Reason: it has hard reference to resource tckmcbc.uwl~api with type application, which is not active on the server.
Thanks in Advance
Sekhar.
Edited by: sekhar c on Mar 21, 2009 11:24 AM

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Need help in localizing the Flex Application

Hi,
I need help in localizing my Flex Application.
my Question is: How to make SPANISH as the default language of Flex Application(Progamatically)? By default its taking en_US as the locale but my requirement is to change it to sp_SP(SPANISH)..
Thanks in Advance..
Pradeep

Localization tutorial:
http://livedocs.adobe.com/flex/3/html/help.html?content=l10n_3.html
How to change the locale at runtime:
http://cookbooks.adobe.com/post_Change_Locale_at_the_runtime-11143.html

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard?

Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

Calling Apex Application using a php script

Hi guys,how can i directly call my Apex Application using a php script.i have apex 2.1 intalled on my system.i created an application and i want my application users to connect directly to the applications login page.I mean somthing like this
(http://127.0.0.1:8080/apex/f?p=103)
and i want users to connect using somthing like this
(http://my system/index.php) or localhost/index.php?
i can run a script query and access my data stored on the database,but what i really want is to connect directly to the login page of my application,so that the staffs in HR can connect direstly to there HR application while those in Sales Will connect direcly to there applications page so it will look like this
http://my system/hr.php
http://mysystem/sales.php

Originally, I had problems w/ the file being placed in
C:/whatever.ext b/c I wasn't using relative paths.
This is the code I use:
$MAXIMUM_FILESIZE = 1024 * 1024 * 2; // 2MB
$newFileLoc = "./wherever/file.jpg"
if ($_FILES['Filedata']['size'] <= $MAXIMUM_FILESIZE) {
move_uploaded_file($_FILES['Filedata']['tmp_name'],
"./temporary/".$_FILES['Filedata']['name']);
rename( "./temporary/".$_FILES['Filedata']['name'],
$newFileLoc );
chmod( $newFileLoc, 0777 );
Modified from this article by Adobe:
http://livedocs.adobe.com/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Live Docs_Book_Parts&file=17_Networking_and_communications_173_6.html

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

I need help verifying the details of a used ipad mini I'm about to buy. Is this possible by just providing the serial

It depends on what you mean by "verifying the details". sberman gave you the best place to look to research the technical specifications of the device you are thinking of purchasing. If, however, you're asking how to check if the device is Activation Locked, then you can check the status here: https://www.icloud.com/activationlock/

Design a site, use my domain name, and host it via .mac

It sounds simple, and I thought a search through these forums would yield some easy answers, but no luck, so here goes:
I'm an advanced Photoshop and Final Cut Studio user, running an audio/video/image restoration and transfer business, but I'm a total beginner in the iWeb/.Mac area.
About three years ago, I decided it was time for a web site, so I went to a local company; they designed and still host my site, for which I pay them $30.00 per month; it's a simple site with no ecommerce, and six or seven pages. There is a contact form through which potential customers can email me.
I also have a domain name, for which I pay $15.00 per year to the same company.
My site is OK, but it's the same as it was three years ago; any small changes I have asked the company to make (mostly just text additions/changes) they have done at the rate of $75.00 per hour.
What I want to do is cancel my account with them, design a totally new site using iWeb, start a .mac account, and have the site hosted using my domain name, so that the average customer who sees my newspaper ad can navigate to my new site exactly as they can with the current one. (I only have one email account, through my ISP, which I don't want to change.)
I've got lots of questions, but mostly, what else do I have to do to make this switch besides cancelling my account with my current company? (After an overlap period, of course) What happens with my domain name--who will I pay to keep it? And finally, what simple things am I not thinking of?
Many thanks in advance to anyone with enough patience to read through this, and still find time to provide some assistance.

You can design your site in iWeb and upload it to either .Mac or a commercial server.
You would then provide the domain name registrar with your server ID number or, in the case of .Mac, your .Mac URL and instruct them to point your domain name in that direction.
.Mac is neither intended for, nor the best option, for a business site.
For example the company I host with - Host Excellence - allows you a free domain name registration and up to 6 sites with unlimited web mail and more server space than you are likely to need for about the cost of a .Mac account.
Commercial servers are a lot more reliable than .Mac, have wider bandwidth and usually have good tech support.
You only have to look at the number of problems in this forum concerning .Mac to see that tech support is not readily available from Apple.
I'm not putting down .Mac. I use it myself for various purposes and it is good for its intended use of one clicking publishing of personal websites.

Using own domain name , duplication of web address HELP !!

Hi all,
Although this is not a big problem it is quite annoying. I am currently building website within Iweb 09. I have managed to set up my own domain name with no problems at all. The only thing is I get a duplication of my website name on the browser here it is :
*http://www.topviewweddings.co.uk/topviewweddings/Home.html*
I would ideally like to just have *http://www.topviewweddings.co.uk*
Anyone have any ideas on how to do this ??
cheers
T

One way would be to use standard domain name forwarding (not CNAME) and enable masking. That would put http://www.topviewweddings.co.uk in the URL window of ALL your pages. The downside to that is visitors can only bookmark your first page which may or may not be a problem. My tutorial site, http://toadstutorials.info , is set up that way.
OT

I want to use a domain name and I have alot of questions. please help!!!

If i switch to a domain, will i be able to se all of the iwebs features?
will i have to pay for a domain and .mac subscription?
It says i used up 17mb of 25mb on my idisk, once i hit 25 what happens?

ok well lets say i want to use a domain name such as
www.mywebste.com. if i forward it then all u have ot
do is type in www.mywebsite.com and it will bing u to
web.mac.com/whatever?
Yes.
If i do it this way will i
still be able to use all of the iwebs fatures such as
blog comment, hit counter...?
I think so, but since I don't do this I don't know for sure.
also if i do it this way will i have to pay for the
.mac subscription too?
Yes, if you keep your site physically on .Mac you have to pay for it.
can you send me a website where i can find lots of
effects i can use in my iweb page because the effects
on iweb are very limited.
The best thing for you to do is search this forum using the term for the effect you are interested in.
If you find iWeb too limited and don't find workarounds in this Forum for adding the effects you want, you can consider using another app. Here is one list:
http://www.pure-mac.com/webed.html

Cant connect using another domain name

Hi. iChat is up and running, we're able to connect to it using user@servername, but when we try to use another domain name it doesnt work (dns is pointed to that server, if i ping it it does give the correct ip), i know the dns is working because if i check the server log it does say i connected to it, but 1 sec. after it disconnects any ideas?

Welcome to Apple Discussions
You must ensure that you list the other domains in the Host Domains section of the Settings tab Server Admin application. Assuming you have done that and you still have problem, it will help us help you if you post the entries you have in the log file and the domains and one of the usernames you are trying to use.
Tim

Using Multiple Domain Names to Access Our Portal

We operate one domain corp.company.com but all internal intranet web servers get assigned the address inside.ZZZ. The inside.ZZZ is on our IE exclusion list but company.com is not. Adding company.com seems to be a miserable task so we are looking at adding an alias so our users can access the server at the new inside.ZZZ url. We have DNS pointing the URL to the right server and that seems to be working properly.
Something within the application is redirecting the page to gnwhepdev.corp. company .com (our servers domain address) after the initial login. Since *.corp. company .com is not in the exclusion list, it is considered an outside address and rerouted. We are trying to find some way to pass the alias within the application itself so that we dont need *.corp. company .com in the exclusion list and we can point users to the inside.ZZZ url.
Our team researched this issue and found documentation that supported the use of multiple domain names to access a Enterprise Portal. The documentation that we found is below:
How ToConfigure the J2EE Engine Deployment Descriptor (Version 1.00 July 2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0eb8120-b66c-2910-5795-894f384fc054
Particularly on page 13-15 in the documentation it talks about enabling the portal via multiple domain names (Section 3.7: Using Multiple Domain Names to Access the Portal). Also, the documentation says the following:
You must have sever proxy servers, each with a different domain name. You then activate the filter mechanism and configure it to work with several proxy servers
We have several questions about the possiblities of being able to set this up and whether it would require another server where Web Dispatcher would need to be installed for this configuration to work properly. Can someone please provide some insight into what needs to be configured and answer the question about the Web Dispatcher? Also, if Web Dispatcher is required, what steps need to be done to configure? If Web Dispatcher is not needed, what will we need to do apart from that to set this up for our Enterprise Portal system?

It is but you have to use masking......
http://iwebfaq.org/site/iWeb_Domains.html

I want to know how to use my domain name in business catalyst

please I want to know how to use my domain name in business catalyst

Hello marionussen,
This issue of your's is specific to Buisness Catalyst and me have a forum for Buisness Catalyst. I would suggest you to post your query to forum: http://forums.adobe.com/community/business_catalyst for help.
Let me know for any further query.
Regards,
Ratandeep Arora

Using a domain name with the mac site

If I use a domain name on Site #2, does that mean that Site #1 will automatically have the same domain name?
I already have a Site #1 up and running. Now I purchased a new domain name that I would like to use only for site# 2. I was worried about going in with any edits to Site #1 just in case it would go to the new domain name instead of where it is right now.
Any light on that subject?

If you have 2 websites in the same domain folder the uppermost site or the site that you most recently published will be linked to your domain name. If you don't want it to be then you need to re-publish with the site that you want to be linked to your domain name is uppermost. You can move the sites around by dropping and dragging.
The easiest thing to do is to separate the sites so that you have site 1 in 1 folder and site 2 in another. Following this, the site that you publish first will be linked to your domain name. If it is not this site that you want then just publish the other site.
How do you have the first site set up? Is it using CNAME or web forwarding? Have you entered your personal domain name into your .Mac account?
If you have one .Mac account and two websites and two personal domain names, then you can use CNAME for one site and web forwarding with or without masking for the other site. You can only enter one domain name into one .Mac account.

Need help hosting an XE APEX application using a domain name

Similar Messages

Maybe you are looking for