Need Help in File to Multiple Receivers Sceanrio without BPM
Hi Friends,
My sceanrio is picking the PO data from file and creating SO in multiple receivers. I configured multiple receivers in Receiver Determination and it is working fine.
Since i use multiple receivers i can't make this sceanrio as synchronous one. But i want to know the generated SO number. Is there any way to get this? Or should i use BPM?
Thanks & Regards,
Senthil.
Hi
I think you can do this with BPM only.
As per multicast pattern you can send a message to multiple receivers and waiting for a response message from each of the receivers.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Thanks
Prasad Nemalikanti
Similar Messages
-
File to multiple IDOC split without BPM
Hi expert,
I have a flat file to IDOC scenario. In flat file, I have thousands of rows. Each row need to create one IDOC. In IDOC, I have 3 segments(seg2 is the child of seg1, seg3 is the child of seg2). Each field in flat file will be mapped to the same name in IDOC. Here is my example structure:
MT_Flatfile
row--0:unbounded
seg1a --0:1
seg1b --0:1
seg2a - 0:1
seg2b - 0:1
seg3a - 0:1
seg3b - 0:1
Sample_IDOC_name
IDOC - 0:unbounded
EDI_DC40
seg1 - 1:1
seg1a - 0:1
seg1b - 0:1
seg2 - 0:unbounded
seg2a - 0:1
seg2b - 0:2
seg3 - 0:unbounded
seg3a - 0:1
seg3b - 0:1
I mapped row to IDOC. It did create multiple IDOCs. But each IDOC only contain seg1. Then I mapped row to seg2 and seg3 node. The first IDOC has three segments and the rest still only have seg1. And in first IDOC, the seg1 is filled correct. seg2 and seg3 have multiple records. Can anyone tell me how I do mapping without using BPM for this case to make each IDOC has one seg1, one seg2 and one seg3?
Thanks a lot.
Charles
Edited by: Charles M Gates on Nov 22, 2011 4:08 PM
Edited by: Charles M Gates on Nov 22, 2011 4:09 PMHi,
Your issue come from certainly to the fact that in source file, for at least one row, there is a segN which is missing (see occurence "0..1").
And so after that, you have a bad behavior to the target Idoc segment, due to the fact you did not manage properly the Context. In Message Mapping, use the right click to display your context, and you will see a difference of context between your source and the desired target.
the error certainly appears for a sub-segment which exist whereas its highest level is missing (in your source).
regards
Mickael -
I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?
The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt -
Help needed in Multiple Receivers sceenarios using BPM
Hi,
I am new to BPM. As per my requirement, based on a business logic i may split the messages into two at message mapping. If i have spitted the messages into two, it should go to different receivers. Or if my logic hasnt splitted the mesaage means it should go to any one of the receivers. I also expect response from the receiver system once its done successfully.
Could you help me how to do this using BPM?
Thanks & Regards,
Senthil.Hi,
You can do it without BPM also, by using MultiMapping. If only splitting is required then I would suggest not to use BPM since it will consume much memory. Instead you can use multmapping.
For Multimapping, go to messages tab in message mapping and select your different target structures and map it as per your requirement. In Integration Directory, go to advanced Interface Determination and proceed.
Br,
Madan Agrawal
Edited by: Madan Agrawal on Feb 12, 2009 8:25 AM -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
i have a brand new MuVo n200
i need help, i put my cd's in and everyhting and i filled it with songs ans i can play them and everything, but i hate thats itssorted in ABC order. i cannot figure how to put them so it is in order by the CD or the bandname.
please help.
message me on aim if you want [email][email protected]][email protected][/url]To group the songs into albums or artist groups, I would definitely suggest putting all the tracks from each album/group in its own folder on your PC and put the folder on the muvo in just the same way as you would put a single mp3. The player (in normal play mode) will then play each folder all the way through before moving on to the next one alphabetically (or numerically, if you put numbers at the start of the folder names) and you can then use 'skip folder' to skip through to find the particular album or artist you're looking for. Play around with the shuffle modes too - you can shuffle within folders or just shuffle everything if you want.
Tracks will normally be played alphabetically. To get them to play in order of track number, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' If you've got tonnes of songs and you're worried about it taking ages, the computer will do it for you! Click on 'my computer', then click on 'Muvo N200 media explorer'.. This shows the contents of your player. Choose a folder to reorder the songs in and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered in that order!
For instructions on how to create folders in mediasource, read the thread in this link:
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=926
I don't think you can put folders within folders in the muvo, but just the one layer really helps organisation.
Hope that helps!
x Flaneur
PS- scroll down in the thread in the link: Jeremy CL was nice enough to give pictures in his instructions! If you'd like more help, type 'create folders' or something into the forum search as there's probably quite a lot of advice kicking about here!Message Edited by flaneur on 03-27-2005 :8 PM -
NEED HELP GETTING FILES FROM ITUNES ON ONE COMPUTER TO THE OTHER.
So I was using a PC to backup my iphone 5 to itunes; however, i just bought a macbook pro and it wont let me transfer the files from one computer to the other and i need help!
Click here and pick the option which best fits your situation.
(93771) -
I need help transferring files from a locked admin account
I was having trouble connecting to my school's wifi because I couldn't remember my admin password to authenticate the changes. I created a new admin account, and connected to the wifi. I didn't realize by doing this all of my files would be on the old admin account. Now I am completely locked out of the account, and need help getting my files off of it! Any ideas?
Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
http://support.apple.com/kb/HT4796
and this article:
http://www.macworld.co.uk/mac/news/?newsid=3444778&olo=email -
New mac user needs help transfering files from Dell...
I have a Dell running Windows XP and need help transfering the files from the dell to the mac.
Also I have no idea what OP system I have, how do you tell which one you have???Go to the blue Apple menu and scroll down to "About this Mac"
In the summary window that opens you will find the following information:
Mac OS X version (assuming you are running OS X)
Processor speed.
Memory
Startup disk
The More Info button will take you to an in-depth overview of hardware, network set-up and installed software.
As far as transference is concerned, you can either transfer files via CD, DVD, external hard drive... or by networking the two computers.
Here's a link for an overview concerning Mac to PC connectivity:
http://docs.info.apple.com/article.html?artnum=19652
I hope the above helps.
Reagrds
Tony
G5 iMac, G4PB, iMac DVD 450Mhz Mac OS X (10.4.2) -
[JS] Need Help Removing File extension (in CS2 and CS3)
Hello All.
I have a menu in a dialog that needs to list some file names, but without their file extensions (which will always be .txt in my case). The following is some code that successfully does this in CS3, but I also need it to work in CS2. Do you have any other ways to do this? One code that works in both versions (CS2 and CS3) is ideal.
myNameWithoutExtensionFunction = function( myNameWithExtention ) {
myNameWithoutExtension = myNameWithExtention
myEndOfFileName = myNameWithoutExtension.lastIndexOf( "." ) // get the last period (.) in the filename
if ( myEndOfFileName > -1 ) {
myNameWithoutExtension = myNameWithoutExtension.substr( 0, myEndOfFileName )
return myNameWithoutExtension
Thanks in advance.
DanI realized my mistake. The above code works just fine in CS2. My mistake was elsewhere. The name I was sending to this function wasn't being recognized by CS2. Once I corrected that and sent a valid name to this function it worked. So in case someone needs to remove file extensions, feel free to use the above function!
-
Need help putting Photoshop CS6 on new device (without the CD)
So I just recently purchased a new Windows Surface Pro 3 which I've been looking forward to using Photoshop CS6 on. I bought PS CS6 through Journeyed.com a couple years ago and have already registered it to my old laptop. Unfortunately, I misplaced the CD, but I have the box with the product code. I thought I could just do like I did before--download the free trial of CS6 and put in my serial number. Since Adobe now offers "Photoshop CC" instead of CS6, I guess that's what throws it off and stops my serial number from working (i get "invalid code"). I even had to double check what my serial code was through Adobe and my serial number was there, already registered.
I've already tried downloading the free trial of CS6 from other websites but it's been complicated. One of them didn't even work and gave me an error message, and the other was .dmg file so I had to download an app just to unzip the file. I'm just really confused and need help with this. I even tried to put the program files from my laptop onto an external hard drive and put them onto my surface pro, but that got confusing too.
Thanks,
GabyYou can download CS6 software so you can use your code
Download CS6 products from adobe site -
Need Help Converting AVI Home Movies to Mpeg without audio and Video Delay.
I have lots of home movies of my new baby i want to take with me while in Navy training and need help. I have tried 7 movie conversion software programs and it have cost me a lot, but none of them work. Any suggestions please? I leave soon and would like to know as soon as possible please. Thank you so much
Converting AVI to MPEG on Windows XP OSYOu need to learn how to use FCP. Sorry, no offense needed, and I know it sounds harsh. But from reading that I can tell you have no idea about how to properly import tapeless media into FCP...and don't know what formats FCP works with...nor know what formats the cameras record. This is all basic stuff you need to know before you edit. Editing isn't only creative, but lately highly technical as well...you need to know what your software is capable of doing, and how to get the footage into it properly.
You cannot do what you did...directly drag from the cameras into FCP. No...it needs to be imported, typically with LOG AND TRANSFER...and converted from the shooting format, which typically isn't natively editable in FCP (want native, use Adobe Premiere...). It needs to be converted to ProRes. And yes, the file sizes of ProRes are a LOT bigger than the camera originals. 4-5 times larger. That's how FCP works.
Here's a quick tutorial to get you started. But then I suggest getting to know the editing system better.
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 -
I need help with send a gift though iTunes without a credit card
I need help send a iTunes gift card on iPhone though iTunes Store without a creid card
That's not possible. Apple doesn't allow iTunes Store credit to be spent on gifts.
(126618) -
Multiple IDOC to Multiple IDOC scenario without BPM steps????
Hi
Could you please give me the solution for this ???
I want steps for sending all IDOCs at a time- ---"Multiple IDOC to Multiple IDOC scenario without using BPM".???
thanks
3nadhHello,
Refer the below, for certain details!
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi ALE configuration for pushing idocs from SAP to XI
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change XI: IDOC bundling - the "trick" with the occurance change
Regards,
Jilan -
Creating Multiple different IDocs without BPM
Hi all,
I have a scenario in where I have a input structure and have to create multiple different IDocs (the types of the IDocs are also different)
For example,
Input XML will create 5 IDocs of type A, 3 IDocs of type B, 1 IDocs of type C, no IDocs for type D and 10 IDocs for type E.
Is this possible without BPM? This will be a complex Mapping. In BPM I am sure for every type to create one send step would be easy. But would it be more efficient?
Thanks.>
Chris027 wrote:
> This looks promising, i'll try it.
something from the blog might be useful for you:
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on
the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not
part of the AE.
Maybe you are looking for
-
How can I move clips in my project more accurately? i.e. Less than one frame over left or right?
Hi there I'm trying to sync some video to some audio. I have snapping turned off, yet I cant move a frame left or right any less than one frame. Is it not possible to move a frame anyless than one frame left or right? It still SNAPS to one frame left
-
I recently migrated our KMS server to a 2012 R2 box and I cannot get the count to budge now.According to this article our KMS key should now activate 2008 r2, 7 Ent, 2012 R2.7. Enter your KMS Host Key (CSVLK). Note: You can only install a Windows Ser
-
Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this
-
Easy question about Reformatting
Hello all, I am trying to reformat my HD after I have deleted Windows XP off of a partition. The reason for this is an upgrade to Vista and a larger allotment of HD space. My question is: I am using Backup v3.1.1. (v369) and I have FULL backup files
-
Hi there! I have a problem with my HERE Maps working along with HERE Drive. I know 100% that the toll road option is set to off in Drive, but when I search for an address in Maps and start the navigation the transition from Maps to Drive turns the T