NEED HELP IN: layout set in favorites

Hello again,
the favorites iView use the Layout Set "LinkListExplorer". In the iview is a link "edit", which open a new iView with the Layout Set "LinkListMaintenance". I have modified the second layout Set and saved it under xxLinkListMaintenance.
Now, I need to know how to put the layout set xxLinkListMaintenance in touch with the first layout set LinkListExplorer.
Please help!
Thanks a lot
Sybille

Hi Sybille,
you always want to change the hard coded things
The way:
1.) Decompile com.sapportals.wcm.rendering.collection.cm.LinkListCollectionRenderer within km.appl.ui.flex.collection_core.jar within ...\irj\root\WEB-INF\portal\portalapps\com.sap.km.cm.ui.flex\private\lib
2.) In line 530 (query.add("rndLayoutSet", "LinkListMaintenance");), replace the LayoutSet with the one of your choice.
3.) Create a new portal application with this CollectionRenderer and a bootstrap service.
4.) Define this CollectionRenderer within KM (map a name to the class).
5.) Create a new LayoutSet xxLinkListExplorer copied from LinkListExplorer but with the new CollectionRenderer.
Hope it helps
Detlev
PS:
- If you need assistance, you know the experts
- Better forum would have been KMC

Similar Messages

New to Indesign and need help on layout

Hi there
I have a small invitaiton business and have recently started using Indesign (steep learning curve). I have designed a wedding suite for a bride and it is ready to go off to the printers. My problem is i have recently changed printers and these guys print on size SRA3 and charge for set up costs if I dont supply all my setup in this size.
I dont know how to do this! Is there a simple way i can take my one invitation and place it multiple times on a SRA3 setup without copying and pasting. Plus all my crop marks and bleeds need to line up.
ANy help would be really appreciated.
thanks
Nerissa

I really did not want to say more about this but your attitude is ....
Who are you that you think you know every printers setup and requirements, who are you to say that a person must not go to there prefered printer for work.
What the hell does a car got to do with printing, NOTHING. Keep on topic!
You say modern workflow, so your saying every print shop in every town in every country has exactly the same equipment as your printer has and whats needed to handle your unprofessional approach to laying out graphics, wake up will ya every print house in every town can be different your arrogance in assuming every print house can reproduce your improperly prepared graphics is just going to cause trouble.
Refering back to the original post. I did not see the name of the printer they where sending the job to, do you know them personally to insist that your way is the best way to reproduce the job. NO!
You do not know them yet you jumped on my suggestion and it was only a suggestion that could lead to an idea for getting the job done. You called it BS yet every working day at my work I follow that sort of work flow for a number of reason. No it is not modern Yes it does work everyday.
You thinking that your way is the only way is no help to anyone in here.
This forum is for everyone, if I take the time to suggest something so be it, it is not your job to judge if my suggestion is wrong.
Be a help not a hinderance and keep your arrogance outta the forum.
P Taz:
Bob's main problem is this modern workflow chip on his shoulder, not everyone has the latest and greatest hardware and software. Adobe is printing longer then I care to think back on, and they have many different ways of doing this job and many of these are still in use. Modern is all fine and dandy if you have it.
I am not happy with using obsolete processes but that is what I have to work with. I absorb a lot that is said in these forums not all I can use yet but its good to see the changes in technology. Everyone as a designer has to keep in mind the Printshop that is printing there work
I never came in here with the intention to revert people, I only suggested a way to get a job done even you do not know what equipment the printer has to reproduce the OP problem. How in gods name can a suggestion be wrong for this forum even you have fallen for bob's inability to realise there are still people out in the real world not using the most modern workflow equipment and these people need help.
It is no good you just saying update update update. The job needs doing with what they have, later when money permits or whatever then talk to them about modern workflows.
And lastly goes out my appology to the original poster, I am very sorry this has gone as far as it has.
Bob... Lighten up!

New 5g touch need help with photo setting and..

Hello!
Can someone help me pls. I'm sure anyone who has a 4g touch or iphone 5 or previous iphone can help. I'm coming from ipod touch 2g so a lot of this technology is foreign to me. Anyway, I accidentally synced my photo's from my computer onto my touch. I don't want thousands of pics on there. I can't seem to find a delete button for the albums on the touch. How do I delete them from my ipod? I have transferred pictured I've taken from the ipod to my computer, so I am not worried about deleting them. I have deleted individual pictures but thousands would take forever one by one. Also, I have set this ipod as a new device as I want to be particular about what is on it. So I didn't want to back up from my 2g. I've notice that when I synced and chose the game/apps I wanted on the device that they all reset. the games have deleted their save information and I have to start from scratch. Is this normal?
Thanks,
From a long time coming updated device!

I think I might need a little clarification on your problem. But just to clarify, the iPod Touch nor the iPhone support synchronization over WiFi, they still have to be synchronized over a physical iPod cable. Are you trying to get both the iPod and the computer connected to the internet? Do you own a wireless router?

Total newbie needs help installing and setting up Solaris 10 as a server

i'm attempting to set up one computer to act as a file and print server on my home network, so that i can store all of my music and video files on it instead and print to my parallel-only laser printer. 80% of the time i'm using my laptop, so i need the mass storage and printer to be handled by another device - the server!
i'm not sure if i'm even installing Solaris 10 correctly. how should it be installed to then act as a server? my two (incredibly long, like 3+ hours each) install attempts so far have resulted in an OS that looks like a nice fancy GUI-laden desktop which doesn't appear to show me my 750G SATA storage drive (the OS is on a 40G IDE drive).
in the end, i'd like to have the system working so that my only interaction with it is the power button - press it once to power it on and it'll boot up and long in automagically and make itself seen over the network (with printer and files stored on drives accessible to my laptop or any other PC that's on the same network), and then press the power button again to shut down the entire system gracefully (so far, when i press the power button, it's a quick kill like pulling the power cord - i'm pretty sure that's a bad way of having the system shut down, so how do i change it?)
i'm really hoping to use Solaris due to the promising ZFS scheme. my only exposure so far to unix / linux has been with ubuntu, which i usually like but sometimes loathe (primarily file permissions and network manager).

Let's try step by step rather than asking for setting up a server as a while and I'll try to help you as much as I can.
For setting up a printer, it's not that easy or quick setting up a printer on Solaris, I mean it's not like plug-n-play. Tell us about your printer and how it's connected to your system (usb, ethernet, parallel, serial).
As for shutting down the system, it's recommended to use the shutdown commnad like this:
# shutdown -y -i0 -g0
--gibb

I need help to re set QuickTime player as my default internet Video Player

Does anyone know about QuickTime Player 7 10.0?
I have a Real Player software Program that is set as my internet default video player, I want to change and re set my internet video player as my default QuickTime Player, I don't know how to change and re set my Internet Video player. I noticed that in my QuickTime Player it doesn't have a preferences under the quickTime Player Menu. Does anyone know how I can re set My QuickTime Player as my internet Video default Player?
Thank You,
Mrs. Trisha Foster

Sorry, look under the Help menu -> installed plugins (I'm using Firefox and had to keep showing/hiding Safari). As for the other location, don't change anything there (not good to change anything in the Library folders) - I just wanted you to look to see if Quicktime is there or not. If it is, you need to take a look while Real Player is open to see if it can be disabled - I don't have it, so I can't give you instructions. If you can't find Quicktime in either location, there is something strange going on because it should be.
If you can't find it under plugins, also check in Applications to see if Quicktime Player is installed and post back. Also, do a search for Quicktime and Quicktime plugins.
I am not sure if you can just download and install it from the Apple download site or if you'd need to use your install disk to reinstall it from there; if you do not have it installed anywhere, it should be fine to download it - hopefully someone else will be able to confirm this.

Need help displaying layouts

I'm new to Java swing but have read the tutorials.. maybe I'm just not very fast learner. However I need to display some things, but having problems doing so in JavaSwing.
Basically my display needs to be like this
Name: <textfield>
Address: <textfield>
Are you married? <yes option> <no Option>
My problem is the yes and no options. If I make the Grid 3 columns then the textfields are displayed in the 2nd column rather than spreading across the 2nd and 3rd columns. The other thing is I want all the Labels (name, address, are you married) to be on one left column while the other items are in another column. I guess this is kinda like a nest panel or something? I'm not really sure. Are there examples of how to do something like this? I learn best by examples.

Swinging :) is kinda like a top-down * bottom-up approach (mix of both). So you gotta think from the top and implement from the bottom. (We can call this design-down, implement-up neh? :)
1. Essentially, you need three rows, with two columns.
2. First column contains three rows of the same size.
3. Second column contains three rows too.
a. First and second rows of second column span the entire row.
c. Last row is split into two.
Make a label panel for holding the labels such as "Name" and "Address". Make this a grid panel of 3 rows and 1 column. Call this LPANEL
Now make another panel, this also with three rows and one column using a grid layout. Call this the FPANEL.
Now, add a textfield to the first two rows.
For the last, create a new panel with a grid layout with size 1x2 (1 row, 2 columns). Call this the OPANEL. Add it to the FPANEL last. So, now you have two panels. How do you ensure they line up?
Set the same margin sizes (and insets) for all components/grid layouts.
Finally, make a MPANEL (main panel) which uses grid bag layout. You want your FPANEL to expand to fill the MPANEL but the LPANEL should be constant no? So we use gridbaglayout and add LPANEL with normal constraints (read up on the constrainst and how to use gridbaglayout :). Add FPANEL with gridbagconstraints that cause it to fill the remainder of the space ("remainder" is the key here).
Voila!
Your are done :)
Now, I would make your life easier by recommending you use netBeans for desiging UI's or Eclipse. But, a year of swinging by hand will give u enuf expertise that when u do start using netBeans etc, you will have be able to get the maximum out of them.
tell me if u got it right!
-vijai.

Needing Help with color setting for Photoshop 4 + imac

Hi, Is anyone able to assist me please. To cut a long story short. i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing. So my problem is .... I had some prints printed today at Fuji and the prints have come back dark and just not up to scratch. I know that it is not Fuji, but my settings. I had someone set up my imac and Photoshop last time, but this time i will have to do myself and i just don't know what to set them at. Can anyone help please. Not sure if you need this info but i am in New Zealand. many thanks in advance.

Being in the business of printing other people's image files, I can say without any doubt that the advent of digital image processing has definitely muddied the waters to a much greater extent than was the case when printing negaive film. I'm also a shooter, and have been using such programs for many years, so I can understand the desire to manipulate your files before sending them to the lab. Color negatives never had "Profiles" attached to them. If the proper film was used for the lighting conditions, it was simply up to the lab to make sure the resulting print was in balance, both in color and density. It was also the lab's responsibility to maintain a degree of quality control that would make all of the above possible and repeatable. I have to agree with the other response to your question. Whether or not you have an embidded a profile, it's always the job of the printer to make sure the final print is up to a certain standard of quality. If that is not the case, find another printer. Unless you have indicated that your files should be printed without any corrections, the oweness belongs to the lab/printer. I do have a few customers whose work I can print with very few corrections, due to the fact that they have calibrated their displays and have a very tight workflow. However, the vast majority of files that I print require a considerable degree of correction, that's my job. It's also the job of your lab/printer and if they are nor satisfying your needs you have to find someone who does. I have printed many files that have no profile embidded and I simply convert them to my working color space(Adobe RGB 1998). If you are concerned about doing color settings, this is the obvious place to start. Create a custom space and make sure your working color is set to Adobe RGB 1998, not sRGB. Adobe RGB 1998 is a considerably larger color space with a wider gamut and will allow for more choices and a wider range when it comes to processing the image. Pro Photo RGB is an even larger color space, but one that is seldom used at this time. I suspect it will become more popular in the fairly near future, as other technologies continue to push the color gamut envelope.
So, I guess the gist of all of this is that you need to either have your lab/printer redo the dark prints, or find someone who knows how to print. And equally important, someone who cares about your work as much as yo do.
I am attaching a screen shot of my color settings and I would suggest this might be a good place to start.
Gary

Rookie needs help recording DJ set through M-audio Firewire 410

Ok.... ive been reading through the forums and I still can't find help...
Im running GB 3 that came with my Macbook I bought about 4 months ago.
I am a DJ and I trying to record a DJ set/demo.
What I use to DJ is Pioneer cdj-800 x2 and a Pioneer DJM400 using Rane Serato Scratch through my Mac.
I recently bought an M-Audio Firewire 410.
I installed all necessary drivers from m-audio's website (i bought it on ebay so it did not come with the install cd).
I connect the Maudio into the Mac as instructed and set all my inputs/outputs in prefs to the m audio.
The record out of my mixer is via rca so i bought an rca to 1/4" cable. The rca going into my mixer and the 1/4" is going into the first "mic/inst" on the interface.
I created a real instrument track on a new project in GB and set the input to channel 1 (mono).
I play a track..... no sound. nothing at all. i tried the inputs in the back of the firwire and played with the gains. still nothing. i am getting a little frustrated here as you can imagine.
I would really appreciate if someone could walk me through this or at least point me in the right direction.
Thanks a ton in advance.
Message was edited by: defman13

Perhaps you may need to reinstall the driver again from the M-audio website. The newest drivers don't work well but if you're running the newest OSX 10.4.10 then you have no choice but to use the newest drivers. When installing the new driver, do not have the 410 hooked up to the computer. After it is installed, shut down the computer. Hook up the 410, then turn the computer on, make sure teh 410 is power button is on as well. Once you're computer is up and running, open up the m-audio mixer application that comes with the driver. on the top right-hand corner is a reset button. Click that and a there will be a popup asking if you want to reset, say reset. Next open up system preferences and check the sound. Select the 410 for input and output. You have to also do this again in garagebands prefs. Test your audio out by playing a song through itunes or something. Hope it works.

Need help getting everything set up :\

I am pretty good at Java programming, and I have experience using MySQL with PHP, but I can't seem to figure out how exactly to work with MySQL in Java. I know I need JDBC, but I don't know where to download it, or how to set it up. It would be great if I could get a walk-through on exactly what to do. If it helps, I have the latest version of the JDK. Thanks!

http://dev.mysql.com/usingmysql/java/

Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

Need help changing the setting to preview entire file names

Using Leopard, I would like to to be able to read the entire name of a file.
For example, my files might say (File 2.....609). What the file is named is File 2 Graphs 6209. How can I set up Leopard to allow me to read the entire file, so I don't have to guess the file?

Ah! I tend to avoid using column view for folders containing items with long names, because it increases the amount of horizontal scrolling needed to see everything, & because I'm usually interested in seeing & sorting items by the non-name columns available in list view.
FWIW, I tried the column view drag handle double click tip on one of the folders containing some of my extra long named items & it does expand to show the entire name, but I don't care for the result: the Finder window expands horizontally so much that it won't all fit within even a 24" widescreen display! So not only do I have to scroll the window's content horizontally to see everything, I have to move the window partially offscreen to do so. That is too much of a chore to make this a very good alternative for long path names.
It occurs to me that there might be a more elegant, subtle, & "it just works" Apple-like solution possible: instead of just abbreviating the displayed item name by replacing enough of the middle characters of the name with an ellipsis to make it fit, it would be cool if this were adaptive & tried first to abbreviate the non-unique parts of the name, relative to all the items in the column. So if say 3 files in a view contained the same 12 character sequence, that sequence would appear with the same abbreviation in each file, more frequently preserving the display of the unique parts of each file name.
Does this make sense?

Need help getting Skype set up.

Can someone please from Skype - contact me, I am having the worst experience with setting this up . I am working from home and need to be able to make calls all over the country and will need several phone numbers. Customer service is non existant and the support on this site is horredous.
Nothing is working - voice mail is set up but when I call from different #'s skype hangs up the call. No where is their support or a toll free # to sw a live person. Emails back do not address any issues.
Is anyone having issues with this site?
Is their a live person that represents Skype or is all computers?
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

You may contact Skype support as described here:
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?q=support
This is a community forum, not a support forum for skype support.

I need help trying to set my phone number as my iMessage

How do I set my phone number as my imessage. I've tried resetting my phone and it still didn't work.

Source: http://support.apple.com/kb/ts4268
iOS: Troubleshooting FaceTime and iMessage activation
Symptoms
Learn to resolve issues with activating FaceTime and iMessage on your iPhone, iPad, or iPod touch.
Resolution
iPhone automatically registers your phone number for use with FaceTime and iMessage.
To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
When you enable FaceTime or iMessage with an iPad or iPod touch, you need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.If you see "Waiting for Activation", "Activation unsuccessful", or "An error occurred during activation"
These messages occur when your iPhone is trying to activate your phone number with iMessage or FaceTime.To resolve these status messages, follow these steps. After each step, turn FaceTime and iMessage off and on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Make sure that you have a cellular network connection with your cellular provider. You need a cellular network connection to activate iMessage and FaceTime with your iPhone phone number.
Go to www.apple.com in Safari to make sure that you have a data connection. You need a data connection to activate iMessage and FaceTime with your iPhone phone number.
Make sure that you can send and receive SMS. You need a valid SMS messaging plan to activate FaceTime and iMessage.
Make sure that FaceTime hasn't been restricted: tap Settings > General > Restrictions > FaceTime.
Set iPhone to the correct time zone: tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Contact your carrier to verify that there are no restrictions, blocks, or filters on text messages. Restrictions, blocks, or filters on text messaging will prevent iMessage and FaceTime registration from completing.
If "Waiting for Activation" still appears after you perform these steps, turn FaceTime and iMessage off and on in Settings > Messages and Settings > FaceTime. You may need to wait up to 24 hours to complete activation. Most attempts will take less than an hour, but some attempts may take up to 24 hours. If your issue isn't resolved after 24 hours, please contact Apple for assistance. If you've recently performed a remote wipe on your iPhone, wait 24 hours from the time you performed the remote wipe, and then turn iMessage off then back on.You can still activate iMessage and FaceTime with your Apple ID when these status messages appear. You can see that you've activated FaceTime and iMessage with your Apple ID by tapping:
Settings > FaceTime > You can be reached by FaceTime at:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
How to Contact Apple: http://support.apple.com/kb/he57

HT5312 i need help I cant set a rescue email

The sreen that im supposed to see to set a rescue email doesnt show neether the part that says i forgot the security questions answers PLEASE HELP

The page says that if you don't have a rescue email address then you will will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Need help on Bios Setting , Trying to set up a Seta Drive

System - Neo3 Platinum, AMD 2800+, Pheonix Bios.
Well Windows took a nose dive last night, couldn't repair it and the reinstall didnt take either. So I dug up an old IDE drive and finally got Windows to run. I have a SATA WD Raptor though that I want to make my main C: HD and use another IDE for extra storage.
My problem is trying to get it bootable, when I have the IDE in of course it reads it as C: and my Raptor as D: I'm not to sure on how to do that in the Pheonix Bios, there are so many settings.
If anyone can help me out it would be appreciated.

hi brokensaber,
welcome to the forum
If you want to install to your sata disconnect the ide until xp is installed.
see
SATA IDE & Windows(Bottom section)
& How to install Windows on a SATA boot drive

NEED HELP IN: layout set in favorites

Similar Messages

Maybe you are looking for