Need help migrating from CR9 to CR10. CR10 is now on its own server

Post Author: ca_nimrod
CA Forum: General
I am not sure how to modify my VBScript code that currently uses the CreateObject command -- Session("oApp") = Server.CreateObject("CrystalRuntime.Application.9") -- to call Crystal. How do I change that code to call Crystal when it is no longer installed directly on the WebServer?
Any help on how to get through this, no matter the solution, is most appreciated.
-Colman

I'm not sure how you can sync the emails you've collected via POP to the IMAP account, or whether it's possible but to setup the new IMAP account should be straightforward. Someone else on here will hopefully be able to advise on the syncing possibilities. I would take the precaution of having a backup of your current 'On My Mac' emails before doing the following.
To create the IMAP account in Mail:
Mail>Preferences>Accounts
Click on the '+' to add an account
Select 'Add other mail account'
Enter your credentials including the word IMAP in the 'Full Name' field (to help differentiate it from your existing POP account with the same email address - you can edit the name later if nec)
Once the detail is filled in hold down the Alt (Option) key before you click on Create and it should change to Continue
The next screen then allows you to specify that the account is IMAP. Input the server addresses and it should be clear from there.

Similar Messages

Need help migrating from Cinewave to Kona

Our graphics department is preparing to switch from the discontinued Cinewave RT (v 4.6) to a Kona 2. The Cinewave RT is currently installed on a G5 running FCP HD (4.5). The Kona is on a G5 running FCP 5.
Our problem is with the gigabytes of clips that were created with the Cinewave. They are in Targa Cine YUV16 codec. When we try to play these clips in QuickTime Player, we get a white screen with no audio. Final Cut Pro 5 shows the clips as black, and reports that they need to be rendered. But they won't render.
Is there any way for us to convert these clips so that they're compatible with the Kona 2 and beyond, short of dumping them to tape, or SDI to SDI?
Please help!!

Talked to AJA about that today....
That codec the 2Vuy codec is for 8 bit video...
The codec used on this Cinewave footage (RT V4.6) was:
Targa CineYUV16, which is a 10 bit codec.
We kinda found a way to do it, but it involves bringing it into FCP, with copmressor setting to match input filetype, and then Saving As, and selecting the compressor format that we normally use, then starting anew with the now-converted files.
Is there any clip conversion programs that will convert clips from one codec format into another, Say, put the files needing-to-be-converted in one folder, and having it convert those files to the same codec type (that our Kona 2 card is set for) and place them in a different folder, keeping the same filenames?
A file conversion program would seem to be a better approach, but I'm not smart in those types of programs....

Need help migrating from Mail 3.6 to Mail 4.2

I just bought a new 27" i7 iMac w/ 8gb ram, 1 TB hard drive.
I'm trying to migrate my settings over from my old G4 17" Powerbook. I'm running 10.5.8 on the laptop with Mail 3.6.
How do I import my mailboxes from my old computer onto the new one? I've tried copying the old Mail folder over to the new computer over firewire. That didn't work. I then archived the mailboxes on the old computer and brought those files over to the new machine. I tried to import them on the new machine directly through mail, no dice.
Any thoughts or suggestions?

bongoray wrote:
I just bought a new 27" i7 iMac w/ 8gb ram, 1 TB hard drive.
I'm trying to migrate my settings over from my old G4 17" Powerbook. I'm running 10.5.8 on the laptop with Mail 3.6.
How do I import my mailboxes from my old computer onto the new one? I've tried copying the old Mail folder over to the new computer over firewire.
you need to do it with both the Mail folder AND the mail preference file.
quit Mail and copy over the whole folder /users/username/library/mail AND the file /users/username/library/preferences/com.apple.mail.plist. start Mail and it should look as it did on the old computer.
BTW, using Migration Assistant you can migrate your entire user including Mail, address book, music and so on.
That didn't work. I then archived the mailboxes on the old computer and brought those files over to the new machine. I tried to import them on the new machine directly through mail, no dice.
Any thoughts or suggestions?

Need help migrating from damaged MacBook Pro to New MacBook Pro.

My Mid-2008 MacBook Pro's logic board died and I have just purchased a 2012 Refurb MacBook Pro to replace the old laptop. I do have a backup on Time Machine but the most recent backup is about a week old. I would like to be able to do the migration using the disk in the old laptop, but it will not completely boot up and will arrive at the "forced shutdown" screen soon after it boots. Can I still connect to the old laptop using migration assistant even though I am at the forced shutdown screen? Old computer is running OSX Lion. I think the new one will have either Mountain Lion or possibly Mavericks on it. I've used Migration Assistant previously, so I am familiar with how it works. I'm just not sure if it will work in this instance with the old computer.

It looks like it did change. (We're talking about 5 years ago and at least 3 operating systems ago), but I do remember that the instructions for Migration Assistant back then said that on the old computer where you just needed to access the drive, you had to hold down a key or keys when after hitting the power key. This will allow access by the new computer to the harddrive in the old computer without the need to boot up, basically making the old computer an oversized harddrive enclosure.
It worked perfectly when I did it with my old iBook which would not even get to the gray Apple logo, but the MacBook was able to fully access the drive, allowing me to migrate the apps, fonts and work files stored on it, including my entire iTunes library.
like I said earlier, if this is no longer the case, than removing the drive from the old computer and inserting it in an external drive is the next best way to go. Of course, having a fairly recent backup on Time Machine should also work.

Need help migrating from pop to imap

Hi,
I have a domain hosted by GoDaddy and have been using their pop3 mail service. Apple Mail is set up so the messages are deleted from the server when they download to my iMac.
I've now upgraded to their service allowing me to use IMAP but I don't want to lose the emails in my inbox and sent items on the Mac. In fact I'd like them so they will be synced with the IMAP server.
How would one go about this, given that I want to use exactly the same email address for IMAP as I was under the pop3 settings?
Anyone know how I can go about this?
Any help much appreciated.
Neil

I'm not sure how you can sync the emails you've collected via POP to the IMAP account, or whether it's possible but to setup the new IMAP account should be straightforward. Someone else on here will hopefully be able to advise on the syncing possibilities. I would take the precaution of having a backup of your current 'On My Mac' emails before doing the following.
To create the IMAP account in Mail:
Mail>Preferences>Accounts
Click on the '+' to add an account
Select 'Add other mail account'
Enter your credentials including the word IMAP in the 'Full Name' field (to help differentiate it from your existing POP account with the same email address - you can edit the name later if nec)
Once the detail is filled in hold down the Alt (Option) key before you click on Create and it should change to Continue
The next screen then allows you to specify that the account is IMAP. Input the server addresses and it should be clear from there.

HT201250 I am very frustrated. New to iMac products. Just bought a 27" iMac two days ago. Received no manual, no booklet with ID registration number, etc. Need help migrating PC to iMac. How do I get in touch?

Need help migrating pc to imac. Do not have manual. Trying to get infornation online, but, cannot get an answer.
I have downloaded pc migration assistant to pc windows 8 pro. Was able to get imac to finally give me "the number"
Did the same with pc received number once, not same as imac. Pop up window with info dissappers and cannot recover
What am I doing wrong? Paid extra for extended support package and it took hours to finally get it registered and approved.
However, no help. Yikes, I feel like a make another great mistake!

First: If you purchased AppleCare you should call back at 1-800-APL-CARE and ask for further assistance. You'll want to learn how to retrieve your operating system version and your IMac's serial number as you'll need these for when you call AppleCare:
Click on the Black Apple in the top left hand corner of your Imac's physical monitor
Click on About this Mac from the drop down menu
Below the silver Apple and "OS X" it will say "Version 10.x.x" (If this number is not 10.8.4, run Software Update by hitting the button marked "Software Update")
Click on this number twice in a row. This is your machine's serial number. (zeros can be used; the letter "O" is never used).
http://support.apple.com/kb/HT1349 for details how to find serial numbers on Apple products
If you have an Apple ID (you can create one at appleid.apple.com), you can login to supportprofile.apple.com, register an Apple product, and sign up for VoicePass, which, if you give your product a name e.g. Maria's Imac, you can speak that over the phone and skip having to give the serial number when you call.
If you have an Apple ID, you can also call AppleCare and ask them to activate VoicePass.
This is the link for your tech specs: http://support.apple.com/kb/SP667
This is the link for your quick start guide: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
This is the link for important product information: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
Second: this is an educated guess: Your new Imac and your PC need to be either on the same wifi network or you need to connect them physically with an Ethernet cable (available at Radio Shack, Wal Mart, etc). My guess is that they are not, and so your IMac and PC are not talking to each other. That might be why you are seeing a different code on the PC.
Time Machine would not be relevant to your issue. http://support.apple.com/kb/HT4796 is the link to relevant instructions, however it left out some housekeeping you should do on your Imac before you begin a migration
Run Software Update on the IMac to confirm that the latest updates are installed.
On the IMac, make sure that you have the latest versions of any third-party software.
On the source Mac, open System Preferences, click Sharing, and make sure there is a name in the Computer Name field.
Do not let either computer go to sleep while you are attempting to migrate. To disable sleep on the IMac
Choose System Preferences from the Apple () menu.
Choose Energy Saver from the View menu.
Adjust the "Computer sleep:" slider to Never. (Change this back after the migration is done).
You can adjust "Display Sleep" to a few minutes - this won't affect the migration
Uncheck the box if checked next to "Put Hard Disks to sleep when possible"
I don't know Windows 8 but this link looks promising as to how to disable sleep: http://techmell.net/how-to/disable-enable-sleep-mode-hibernate-windows-8/
Once you've done this, either connect both Mac and PC to the same wifi network and surf the web with each to confirm that connection is working - or connect them to each other with an Ethernet cable.
Then relaunch Migration Assistant on your Imac and your PC, and follow the instructions in http://support.apple.com/kb/HT4796 starting with your IMac, or call AppleCare back.
Understand that if you have further issues, you'll need to help AppleCare help you by:
walking them through the steps you've taken in Migration Assistant
letting them guide you as they isolate the issue to either:
The Imac's software
The IMac's hardware
The PC's software
The PC's hardware
Firewall settings (maybe - especially if 3rd party firewalls are installed)
The wifi connection, if used
The ethernet connection, if used
I think the issue is likely what I guessed, or it's a software issue.
To learn more about your new Mac, I recommend this link: http://www.apple.com/support/imac/intel/
And this book: http://www.amazon.com/books/dp/0789749890
I am a technical support professional who troubleshoots Macs all day long. I do this for a living. The book above is the most accurate, and easy to understand book I've seen with respect to using Mountain Lion and its various applications. It's for a MacBook but the focus is on the software which is why I recommend it.
Don't feel like you have to rush to upgrade to OS X Mavericks. In fact, you should always confirm both all the hardware and software you use is compatible with any new operating system before you upgrade. And ask yourself: "why do I need it now?" Because it's new is not a good answer.
In the future, specifying any troubleshooting others have done will help those on these boards help you. Also, don't let a specific issue lead you to assume you've made an all-encompassing mistake. It's just one issue, and it's resolvable.
And everyone else: giving a dozen recommendations for reading will only leave the petitioner bewildered. Start with three. And try responding with a hypothesis as to what's causing the primary problem!

Need help getting from 10.5.8 to 10.6.

need help getting from 10.5.8 to 10.6. i know i'm late to the game!

If you are not sure of what you are doing,If you are worried about losing anything when doing a major systems upgrade/update,
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Older version of CarbonCopyCloner found here.
http://mac.filehorse.com/download-carbon-copy-cloner/2734/
Older versions of SuperDuper can be found on the SuperDuper Website and Homepage.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Then, determine if your Mac meets ALL minimum system install requirements.
Mac OS X v10.6 Snow Leopard system requirements
Purchased Installer disc here.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools.
In addition, see this discussion for more relevant info that you may need if you have any other questions or issues.
Snow Leopard upgrade - keeps Photoshop?

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Do I need to unload the GroupWise agents if I am installing WebAccess on its own server?

Hi,
I ma installing GW Web Access into our GW703 tree and the install is prompting me to unload all agents on the machine to which I am installing.
As I am installing onto a separate server, I am assuming I can leave my PO, GWIA and MTA running?
Can someone confirm this before I proceed?
Thanks for your help

Thanks!
>>>
From: Joseph Marton<[email protected]>
To:novell.support.groupwise.7x.web-access
Date: 07/23/2010 9:39 AM
Subject: Re: Do I need to unload the GroupWise agents if I am installing Web Access on its own server?
Jason wrote:
> I ma installing GW Web Access into our GW703 tree and the install is
> prompting me to unload all agents on the machine to which I am
> installing.
>
> As I am installing onto a separate server, I am assuming I can leave
> my PO, GWIA and MTA running?
Yes, the install means to unload all agents running on the server where
you are installing WebAccess. If all your agents are on other servers
you can leave them running.
Novell Knowledge Partner
Enhancement Requests: http://www.novell.com/rms

Need help migrating Mail/iCal/Address data from 10.3 to 10.7

Hi, I'm helping a relative migrate from an 8-year old iMac (10.3.9) to a new one running Lion. Mostly it's going to be a clean sweep app-wise, but we need to move iCal, Mail and Address Book data across. Of course, these apps have changed a fair bit in across the last 4 'full' versions of OS X, and the folder structures within the user library no longer match between machines. Can anyone advise me what to copy and what to junk? I appreciate this is a bit of a vague question, but that's the situation. Any help much appreciated. Thanks.

The webtogo was dropped in 11.x. so the URL has changed. This is one of those situations which needs to be handled by support. Have you filed a request with support yet?
thanks
mike

Help Migrating from !0.4 iBook to MBPRO 2.4

Just bought MB Pro. Need to migrate all my files and programs from iBook running 10.4. I have read about issues migrating files from G4 to intel (universal binary). Not sure of best sequence but was thinkging of:
1. Boot MBPRO but not update to 10.5 yet (can I even do this, I know the box has a disk for Leopard).
2. Use Migration assistant to copy:
-user documents
-mail, iCal, adress book, safari data
-itunes Library (worried about this one!)
-selected applications (don't have too many)
-keychain library
3. Then update to 10.5
Does this make sense? I am worried if I copy the library data directly from 10.4 to 10.5 I might bugger things up (especially with Mail).
I have iPhone synced to iTunes - is there a separate library folder for iphone or is everything stored in iTunes library?
Any words of advice? Should I roll the dice and let Migration Assistant transfer all data and Applications?
Help appreciated!

Sorry, forgot to thank Kappy for the useful post on migrating to intel Macs. THANKS KAPPY!

Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

Hello,
Currently we are in the midst of migrating all of our report for one of our main application from CR 9 to CR11 R2. The entire migrating, importing, as well as publishing for tall the report runs smoothly. We even can view the report once we called up the report from the repository to be displayed in its infoview. But my question is:
1. Is there any way that the report can auto adjust its size once the report been print out? This is because I believe in CR 9, ( we are using RAS9 btw) once printe out; the report will be automatically adjusted, different than the CR 11 which is WYSWYG. This has caused some of the report layout been out-of-margin as well font sizing are not the same anymore (sometimes big and sometimes too small) and not the same as per old (CR 9 version) report.
With this explanation, it is hope you guys or any of your team can give me some solution or advice on how for me to cater this problem.
2. Another thing that I need to clarify with you guys is does CR 11 being supported by Printronix 5000 series of printer? This is because when the same title report when being generated from CR 9 and CR 11 both will come out in a different output/ result.
CR 9 is a readable but yet in CR 11 which I believe is a WYSWYG Windows Generic Text driver report application wonu2019t be able to print out nicely as some of the font is smudge and not readable. If this is the case, I need a clarification from you guys as whether the printer is being supported or not?

Hi Daniel,
Where are you seeing the differences, in Crystal Reports or through BusinessObjects Enterprise? If it's from BOE, make sure you have the Printronix printer driver installed on the Page Server machine, and that the Page Server service is running under a domain account that has local admin rights.
Regards,
Wallie

Need help converting from 4.0 to 2011

hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi ‏73 KB
8673D.vi ‏30 KB
8970 FREQ.vi ‏26 KB

attached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi ‏13 KB
8970 FREQ.vi ‏11 KB
noise source.vi ‏24 KB

Need help migrating OD users and user data

I need some advise.
I have OD user accounts, more precisely NetHomeAccounts, and the users home folders reside on a 1TB RAID. The RAID is full. No surprise, new that would happen.
I've acquired a 12TB RAID that i plan to move the home folders too.
I also want to consolidate two servers into one. I believe I can use migration assistant to move the OD acounts from one server to another.
my question is about the user data i need to move between two RAIDs...
should I use rsyc to move the NetAccount Home folders from the full RAID to the new 12TB RAID?
- will the accounts migrated from server A to server B recognize there old home folder that is now hosted on a new 12TB RAID? will i run into permission errors?
please advise. Thank You.

There are serveral ways you can do this, and would depend very much on how you have set things up, although I feel the simplest would simply to shut your file sharing services down, clone the old RAID volume to the new RAID volume, modify/recreate your Users file sharing volume to point to the new RAID drive (so there's no need to modify OD records) and start your file sharing services again.
Another way would be to use the ditto (or rsync) command in Terminal to do the copy process if you aren't wanting to more the entire contents of a volume. Ultimately if your OD user records aren't being changed then user IDs, and hence permissions, should remain constant.
Without know exactly what is where and how things are set up it's hard to know exactly what the preferred route would be.

HT4889 I need to migrate from a mac pro os 10.6.8 to OS lion imac. I will be using a firewire. I see articles for os 10.4 to lion but not 10.6.8 to lion - anyone have the steps?

I have a mac pro 10.6.8 and need to migrate everything to the imac with OS lion. I see articles for migration form 10.6 to OS lion but not 10.6.8 -
Anyone have a link or a step by step guide so I can do this correctly?

See Pondini's Setup New Mac guide.

Need help migrating from CR9 to CR10. CR10 is now on its own server

Similar Messages

Maybe you are looking for