Need Help on generating XSL using XML.

Hi All,
I have to convert XML file to XSL file.How can I do grouping in XSL file based on XML file.
Is there any tool available for converting XML to XSL tags.
Please reply me.
Thanks,
Dhana

Please make the extra effort to write out words such as "you" and "good" The extra keystrokes won't cost much in the way of time, and the enhanced clarity will be appreciated by those communicating on a forum with international readership.
oh.. yeah i guess i could do it by myself .. there
are some gd examples on the net which i foundThe best way to learn is to play with it.
is it possible for the user to click WHILE my
application generates the character 'A' ?No. Imagen you have connected two keyboards to you computer. One you control, one someone else controls.
You can still only have one window active to type it, so you what one types would get muddled up with what the other person types.
Why do you want to do this (press A over and over again)? Maybe the application you are attempting to control has a better method of controlling it (command line version, an API to use, Windows Scripting etc)

Similar Messages

Need help with generating keys from xml

Hello,
I am just learning about JCE and am haveing some problems with implementing a basic program.
I have the following information:
<RSAKeyValue>
<Modulus>Base64EncodedString</Modulus>
<Exponent>Base64EncodedString</Exponent>
<P>Base64EncodedString</P>
<Q>Base64EncodedString</Q>
<DP>Base64EncodedString</DP>
<DQ>Base64EncodedString</DQ>
<InverseQ>Base64EncodedString</InverseQ>
<D>Base64EncodedString</D>
</RSAKeyValue>
From which I need to construct a public and private key. I am using RSA algorithm for the encrypting and decrypting. I am using the org.bouncycastle.jce.provider.BouncyCastleProvider provider. Any help would be greatly appreciated.
My questions are:
1) Is it possible to create the public and private key from this data?
2) How can I construct a public and private key from this data.
Thank you in advance.
Sunit.

Thanks for your help...I am still having problems.
I am now creating the public and private keys. I am generating the public exp, modulus, private exp, and the encrypted text from another source.
so my questions are:
1) How do I verfiy that the private and public keys that I generate are valid?
2) How do I get the decrypted text back in a readable form?
3) the decrypted text should read "ADAM"
Here is a test I wrote:
_________________STARTCODE_____________________
import java.security.*;
import java.security.spec.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import java.math.BigInteger;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
public class CryptTester
     protected Cipher encryptCipher = null;
     protected Cipher decryptCipher = null;
     private KeyFactory keyFactory = null;
     protected PublicKey publicKey = null;
     protected PrivateKey privateKey = null;
     private RSAPublicKeySpec publicKeySpec = null;
     private RSAPrivateKeySpec privateKeySpec = null;
     public CryptTester()
          /* Create Cipher for asymmetric encryption (
          * e.g., RSA),
          try
               encryptCipher = Cipher.getInstance("RSA", "BC");
               System.out.println("Successfully got encrypt Cipher" );
               decryptCipher = Cipher.getInstance("RSA", "BC");
               System.out.println("Successfully got decrypt Cipher" );
               keyFactory = KeyFactory.getInstance("RSA" , "BC");
               System.out.println("Successfully got keyFactory" );
          }catch ( NoSuchAlgorithmException nsae)
               System.out.println("Exception1: " + nsae.toString() );
          catch ( NoSuchPaddingException nspe)
               System.out.println("Exception2: " + nspe.toString() );
          catch ( java.security.NoSuchProviderException nspe)
               System.out.println("Exceptiont6: " + nspe.toString() );
          /* Get the private and public keys specs
          BigInteger publicMod = new BigInteger ("86e0ff4b9e95bc6dcbfd6673b33971d4f728218496adcad92021923a9be815ddb7ecf17c06f437634c62fa999a293da90d964172a21d8ce74bd33938994fbd93377f7d83ce93d523782639c75221a3c91b53927a081b2b089a61770c6d112d78d5da8a6abc452d39a276787892080d6cf17dd09537c1ec5551d89567345068ef", 16);
          BigInteger publicExp = new BigInteger ("5");
          BigInteger privateExp = new BigInteger ("50ed65fa2bf3710ead980a456b88dde62de4e0e9", 16);
          publicKeySpec = new java.security.spec.RSAPublicKeySpec( publicMod, publicExp );
          privateKeySpec = new java.security.spec.RSAPrivateKeySpec( publicMod, privateExp);
          try
               privateKey = keyFactory.generatePrivate(privateKeySpec);
               publicKey = keyFactory.generatePublic(publicKeySpec);
          }catch ( InvalidKeySpecException ivse)
               System.out.println("Exception3: " + ivse.toString() );
          try
          * initialize it for encryption with
          * recipient's public key
               encryptCipher.init(Cipher.ENCRYPT_MODE, publicKey );
               decryptCipher.init(Cipher.DECRYPT_MODE, privateKey );
     }catch ( InvalidKeyException ivse)
               System.out.println("Exception4: " + ivse.toString() );
     public String getPublicKey()
          //return new String(publicKey.getEncoded());
          return publicKey.toString();
     public String getPrivateKey()
     //          return new String(privateKey.getEncoded());
          return privateKey.toString();
     public String encryptIt(String toencrypt)
          * Encrypt the message
          try
               byte [] result = null;
               try
                    result = encryptCipher.doFinal(toencrypt.getBytes());
               catch ( IllegalStateException ise )
                    System.out.println("Exception5: " + ise.toString() );
               return new String(result);
          }catch (Exception e)
               e.printStackTrace();
          return "did not work";
     public String decryptIt(String todecrypt)
                    * decrypt the message
          try
               byte [] result = null;
               try
                    result = decryptCipher.doFinal(todecrypt.getBytes());
               catch ( IllegalStateException ise )
                    System.out.println("Exception6: " + ise.toString() );
               return new String(result);
          }catch (Exception e )
               e.printStackTrace() ;
          return "did not work";
     public static void main(String[] args)
          try
          Security.addProvider(new BouncyCastleProvider());
          CryptTester tester = new CryptTester();
          String encrypted = "307203c3f5827266f5e11af2958271c4";
          System.out.println("Decoding string " + encrypted + "returns : " + tester.decryptIt(encoded) );
          } catch (Exception e)
               e.printStackTrace();
_________________ENDPROGRAM_____________________

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

I need help from chile and use a language translator to write and not turn my iphone4

I need help from chile and use a language translator to write and not turn my iphone4

http://support.apple.com/kb/TS3281
Not turn on

Need help in generating the ranks

Hi,
I need some help in generating the ranks from 1 to 6 for each order_id
based on the item_cnt
Order_Id 100 with the Item_cnt 217,112,89,76,55,39 to be ranked from 1 to 6
Order_Id 200 with the Item_cnt 29,25,22,19,13,13 to be ranked from 1 to 6
Order_id 300 with the Item_cnt 15,7,6,6,6,4 to be ranked from 1 to 6
SOURCE DATA TABLE : ORD_TEST
ORDER_ID ORDER_IN_DATE ORDER_OUT_DATE ITEM_CNT
100 9/11/2012 9/12/2012 217
100 9/13/2012 9/15/2012 112
100 9/14/2012 9/17/2012 89
100 9/13/2012 9/16/2012 76
100 9/12/2012 9/15/2012 55
100 11/9/2012 11/18/2012 39
100 9/14/2012 9/18/2012 37
100 9/20/2012 9/22/2012 32
200 11/9/2012 11/18/2012 29
200 9/13/2012 9/15/2012 25
200 9/12/2012 9/15/2012 22
100 9/12/2012 9/14/2012 22
100 9/13/2012 9/17/2012 20
200 9/14/2012 9/17/2012 19
100 9/14/2012 9/16/2012 19
100 9/13/2012 9/18/2012 18
100 9/12/2012 9/19/2012 15
300 9/11/2012 9/12/2012 15
200 9/12/2012 9/16/2012 13
200 9/22/2012 9/29/2012 13
200 9/13/2012 9/17/2012 12
200 10/5/2012 10/8/2012 9
300 9/12/2012 9/18/2012 7
300 9/12/2012 9/17/2012 6
300 10/6/2012 10/10/2012 6
300 4/25/2013 4/27/2013 6
300 10/6/2012 10/9/2012 4
300 9/16/2012 9/23/2012 2
100 10/5/2012 10/8/2012 1
200 9/11/2012 9/12/2012 1
QUERY OUTPUT NEEDED IS
ORDER_ID ORDER_IN_DATE ORDER_OUT_DATE ITEM_CNT RNK
100 9/11/2012 9/12/2012 217 1
100 9/13/2012 9/15/2012 112 2
100 9/14/2012 9/17/2012 89 3
100 9/13/2012 9/16/2012 76 4
100 9/12/2012 9/15/2012 55 5
100 11/9/2012 11/18/2012 39 6
200 11/9/2012 11/18/2012 29 1
200 9/13/2012 9/15/2012 25 2
200 9/12/2012 9/15/2012 22 3
200 9/14/2012 9/17/2012 19 4
300 9/11/2012 9/12/2012 15 1
200 9/12/2012 9/16/2012 13 5
200 9/22/2012 9/29/2012 13 6
300 9/12/2012 9/18/2012 7 2
300 9/12/2012 9/17/2012 6 3
300 10/6/2012 10/10/2012 6 4
300 4/25/2013 4/27/2013 6 5
300 10/6/2012 10/9/2012 4 6
Below is the script
CREATE TABLE ORD_TEST (ORDER_ID NUMBER, ORDER_IN_DATE
DATE,ORDER_OUT_DATE DATE, ITEM_CNT NUMBER)
INSERT INTO ord_test VALUES
(100,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),217);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),112);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),89);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),76);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),55);
INSERT INTO ord_test VALUES
(100,TO_DATE('11/9/2012','MM/DD/YYYY'),TO_DATE('11/18/2012','MM/DD/YYYY'),39);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),37);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/20/2012','MM/DD/YYYY'),TO_DATE('9/22/2012','MM/DD/YYYY'),32);
INSERT INTO ord_test VALUES
(200,TO_DATE('11/9/2012','MM/DD/YYYY'),TO_DATE('11/18/2012','MM/DD/YYYY'),29);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),25);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),22);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/14/2012','MM/DD/YYYY'),22);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),20);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),19);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),19);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),18);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/19/2012','MM/DD/YYYY'),15);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),15);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),13);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/22/2012','MM/DD/YYYY'),TO_DATE('9/29/2012','MM/DD/YYYY'),13);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),12);
INSERT INTO ord_test VALUES
(200,TO_DATE('10/5/2012','MM/DD/YYYY'),TO_DATE('10/8/2012','MM/DD/YYYY'),9);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),7);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('10/6/2012','MM/DD/YYYY'),TO_DATE('10/10/2012','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('4/25/2013','MM/DD/YYYY'),TO_DATE('4/27/2013','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('10/6/2012','MM/DD/YYYY'),TO_DATE('10/9/2012','MM/DD/YYYY'),4);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/16/2012','MM/DD/YYYY'),TO_DATE('9/23/2012','MM/DD/YYYY'),2);
INSERT INTO ord_test VALUES
(100,TO_DATE('10/5/2012','MM/DD/YYYY'),TO_DATE('10/8/2012','MM/DD/YYYY'),1);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),1);
select * from ord_test order by item_cnt desc;
Thank you

Hi,
That's called a Top-N Query , and here's one way to do it:
WITH    got_rnk            AS
     SELECT    o.*
     ,       ROW_NUMBER () OVER ( PARTITION BY order_id
                             ORDER BY          item_cnt     DESC
                    ) AS rnk
     FROM      ord_test o
SELECT       *
FROM       got_rnk
WHERE       rnk     <= 6
ORDER BY order_id
,            rnk
;Analytic functions (such as ROW_NUMBER) are computed after the WHERE clause is applied. If you want tio use the results of an analytic function in a WHERE clause, then you can compute the analytic function in a sub-query (such as got_rnk above), and then use that value in the WHERE clause of a super-query.

Need help in generating L4 Traffic monitor logs

Hi,
As a part of my project I need to study different types of logs produced by Cisco IronPort. I could generate some access and authentication logs however not sure about generating the L4 Traffic Monitor logs. Can anyone point me to right documentation that will help me generate those logs?
Thanks,
Harshad Kashikar

Harshad,
L4 Traffic Monitoring needs to be configured within the IronPort - first question is do you have a SPAN/TAP port set up on your switch to capture L4 traffic?
Second, I only use this feature to capture information on malware/spyware - I have seen P2P, IRC, and 'phone-home' traffic amongst other things. Do you have an infected host you can monitor?
BF

Need help in english to use my iphone4 with orange.fr in france

I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

Hello
The whole story is a little bit confusing for me. So lets see what you wrote:
>... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
> So now I have a computer I can't use
Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
> I have also bought the product recovery disks from toshiba's backup media site
But why if you already have recovery disc that you have used at the beginning of the whole story?
What you need to do is to use this original disc for OS installation.
-start your notebook and press F12 several times to enter BOOT menu
-when the menu is shown put recovery disc into ODD
-select CD/DVD drive in the menu and press ENTER
-follow the menu on the screen
After recovery image installation you will have factory settings again and everything should be OK.
More questions?

Need Help Understanding How To Use iMessage Between Two iPhones

I have an iPhone 4 and my wife an iPhone 3GS. We both have iOS 5, but I have discovered something about iMessage I need to make sure I understand correctly. As I understand it iMessage can send text even if our voice carrier service is unavailable. I tend to loose signal inside the building I work in. I usually can get texts in and out, but sometimes not. But in testing the two phones sending iMessages, I've noticed is that if I have one of the phones with iMessage turned on and the other with iMessage turned off, the two phones will not be able to exchange text. Is that how it's supposed to work? Even though one of these phones can receive an iMessage doesn't mean the other one send one back. Can't the system detect when one phone is connected and another one not, and the one that is not gets sent SMS messages instead? I don't want to try to send my wife an iMessage because I can't get a voice signal in my building, but her have iMessages turned off and not able to get any messages from me, iMessage or SMS. I guess I need help better understanding how this actually works between the two phones so I can always get texts back and forth between my wife and I. My other misgiving is that this iMessage thing consumes my data limit. My wife gets unlimited because she had her phone before the limits were imposed, but I got on board after, so I am hesitant to use iMessage all the time because of it. I have no intention to send picture mail through iMessage, but the thing is if I wanted to switch to SMS to send picture mail to save data, but my wife's phone is set to iMessage, she won't get it. If this is how this thing is supposed to work, I'm not really impressed. Some insight would be appreciated

I think you are making this way too complicated. Why are you turning iMessage off? If you are at your office connect to the WiFi there and send your wife messages that way (unless your office is blocking the port iMessage uses). When possible the two phones will use iMessage but will revert to SMS is iMessage is not available if that option is set that way.
I would not worry about using up your data plan if you have the 2GB, text iMessages are going to be very small and MMS (picture) ones are not very large either. Unless you are sending hundreds of picture iMessages a day you will have a hard time using up your data.
If you are near an Apple Store you should explore signing up for an intro iPhone course and have them run through iMessage options.

Need help on how to use conference facility within adobe connect

I need some help on how to use conference facility within adobe connect?

I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community

Need help please. When using Safari while banking online I cannot get rid of Pop ups although I have ticket no Pop ups. Any ideas ?

Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.

Get Adblock or GlimmerBlocker.

Help with Photo Gallery using XML file

I am creating a photo gallery using Spry. I used the Photo Gallery Demo (Photo Gallery Version 2) on the labs.adobe.com website. I was successful in creating my site, and having the layout I want. However I would like to display a caption with each photo that is in the large view.
As this example uses XML, I updated my file to look like this:
<photos id="images">
            <photo path="aff2010_01.jpg" width="263" height="350" thumbpath="aff2010_01.jpg" thumbwidth="56"
               thumbheight="75" pcaption="CaptionHere01"></photo>
            <photo path="aff2010_02.jpg" width="350" height="263" thumbpath="aff2010_02.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere02"></photo>
            <photo path="aff2010_03.jpg" width="350" height="263" thumbpath="aff2010_03.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere03"></photo>
</photos>
The images when read into the main file (index.asp) show the images in the thumbnail area and display the correct image in the picture pain. Since I added the pcaption field to the XML file, how do I get it to display? The code in my index.html file looks like this:

rest of the code here:
        <div id="previews">
            <div id="controls">
                <ul id="transport">
                    <li><a href="#" class="previousBtn" title="Previous">Previous</a></li>
                    <li><a href="#" class="playBtn" title="Play/Pause" id="playLabel"><span class="playLabel">Play</span><span class="pauseLabel">Pause</span></a></li>
                    <li><a href="#" class="nextBtn" title="Next">Next</a></li>
                </ul>
            </div>
            <div id="thumbnails" spry:region="dsPhotos" class="SpryHiddenRegion">
                <div class="thumbnail" spry:repeat="dsPhotos"><a href="{path}"><img alt="" src="{thumbpath}"/></a><br /></div>
                <p class="ClearAll"></p>
            </div>
        </div>
        <div id="picture">
            <div id="mainImageOutline"><img id="mainImage" alt="main image" src=""/><br /> Caption: {pcaption}</div>
        </div>
        <p class="clear"></p>
    </div>
Any help with getting the caption to display would be greatly appreciated. The Caption {pcaption} does not work,

Need help on Self Hosting Using channel Factory

Hello,
     Need Help.
     I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
The scenario is something like below this : -
I want to create the endpoint connection to WCF service. I want to achieve this using custom channel factory(not using default channel factory API provided in .Net Framework).
I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
I am able to connect to server side service hosted on different machine using following sample code successfully.
In the case of “self-hosting”  I am receiving following error : --
     "There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
Below is the code which I have written for self hosting WCF service using custom channel factory.
// Method where I am calling CustomChannel Factory constructor
internal void ProxyCall(string msgEndpointConfigurationName, string url)
            string appConfigDirName, extConfigFilePath;
            FileInfo configFileInfo = new FileInfo(appConfigName);
            appConfigDirName = configFileInfo.DirectoryName;
            extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
            this.messageEndpointConfigurationName = msgEndpointConfigurationName;
            if (string.IsNullOrEmpty(url))
                this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
            else
               //EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
               this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
   ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
   foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
    if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
     operation.Behaviors.Add(formatterBehavior);
   this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
   this.messageFactory.Open();
// Custom Channel Factory Class
internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
        /// Custom client channel. Allows to specify a different configuration file
        /// <typeparam name="T"></typeparam>
        private string configurationPath, selectedMsgEndPoint, uriAddress;
        public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
            : base(typeof(T))
            this.configurationPath = configurationPath;
            this.selectedMsgEndPoint = selectedEndPoint;
            this.uriAddress = uriAddress;
            EndpointAddress e = new EndpointAddress(this.uriAddress);
            base.InitializeEndpoint(selectedEndPoint,e);
        //As you can see, a call to the method InitialiazeEndpoint of the base class is required.
        //That method will automatically call to our CreateDescription method to configure the service endpoint.
        ///Loads the serviceEndpoint description from the specified configuration file
        protected override ServiceEndpoint CreateDescription()
            ServiceEndpoint serviceEndpoint = base.CreateDescription();
            return serviceEndpoint;
        private EndpointIdentity GetIdentity(IdentityElement element)
            EndpointIdentity identity = null;
            PropertyInformationCollection properties = element.ElementInformation.Properties;
            if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
            if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
            if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
            if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
            return identity;
        private Binding GetBinding(IBindingConfigurationElement configurationElement)
            if (configurationElement is CustomBindingElement) return new CustomBinding();
            else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
            else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
            else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
            else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
            else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
            else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
            else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
            else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
            return null;
        private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
            BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
            if (bindingElementCollection.ConfiguredBindings.Count > 0)
                IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
                Binding binding = GetBinding(be);
                if (be != null)
                    be.ApplyConfiguration(binding);
                return binding;
            return null;
        private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
            EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
            for (int i = 0; i < behaviorElement.Count; i++)
                BehaviorExtensionElement behaviorExtension = behaviorElement[i];
                object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
behaviorExtension, null);
                if (extension != null)
                    serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
Thanks in advance !! :-)

Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

I am Stuck! Need Help With Multicast Streaming Using VLC Player

I have a Multicast network topology shown below
and my configs
HUB ROUTER
no ip domain lookup
ip domain name primestarhotel.com
ip multicast-routing
interface Loopback0
ip address 5.5.5.5 255.255.255.255
ip pim sparse-dense-mode
interface FastEthernet0/0
ip address 200.0.0.2 255.255.255.240
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.65
description "Server Vlan"
encapsulation dot1Q 65
ip address 10.1.65.1 255.255.255.0
ip pim sparse-dense-mode
ip virtual-reassembly
router ospf 200
log-adjacency-changes
network 5.5.5.5 0.0.0.0 area 0
network 10.1.65.0 0.0.0.255 area 0
network 200.0.0.0 0.0.0.15 area 0
ip route 200.1.1.0 255.255.255.252 200.0.0.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
no ip http server
no ip http secure-server
ip pim send-rp-announce Loopback0 scope 6
ip pim send-rp-discovery Loopback0 scope 6
ISP ROUTER
interface FastEthernet1/0
interface FastEthernet1/1
no switchport
ip address 200.0.0.1 255.255.255.240
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/2
no switchport
ip address 200.1.1.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/3
no switchport
ip address 200.2.2.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
router ospf 200
log-adjacency-changes
network 200.0.0.0 0.0.0.15 area 0
network 200.1.1.0 0.0.0.3 area 0
network 200.2.2.0 0.0.0.3 area 0
SPOKE 1 Router
interface FastEthernet0/0
ip address 200.1.1.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
no ip address
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.12
description "Workstation pc"
encapsulation dot1Q 12
ip address 10.1.12.1 255.255.255.0
ip pim sparse-dense-mode
router ospf 200
log-adjacency-changes
network 10.1.12.0 0.0.0.255 area 0
network 200.1.1.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.1.1.1
SPOKE 2
interface FastEthernet0/0
ip address 200.2.2.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
ip address 10.2.22.1 255.255.255.0
ip pim sparse-dense-mode
speed 100
full-duplex
router ospf 200
log-adjacency-changes
network 10.2.22.0 0.0.0.255 area 0
network 200.2.2.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.2.2.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
I have implemented multicast on the network in a hub and spoke topology. i have set up ospf routing protocol and broadcast all network and can successfully ping.
I am currently using VLC player as my media streaming server and client. i have set up rtp streaming from the HUb router using multicast ip 224.2.2.2 and unable to broadcast the multicast traffic across the spokes 1 and 2 PC's
I have never used vlc player never set up multicast network before and i am struggling with this and need help.
these are my router configs below
http://dl.dropbox.com/u/20145606/ip%20video%20config.txt
Message was edited by: Louis Ojuwu

I have edited the message and the configs and topology are visible above now. instead of the links i provided

Need Help on generating XSL using XML.

Similar Messages

Maybe you are looking for