Need help once I've connected with VPN
I've just started with the iPad and I'm trying to connect to my work network using VPN over my home wifi so far the connection is good but I can't connect to any pc at work. I'm able to do this when I'm at work with the iPad using the local area network and wifi system. What am I doing wrong
ltfromplymouth wrote:
I transfered my itunes library from my old computer to my ipod and then onto my new laptop.
I see all my songs from my library on the lap top, but when I try to play a song it says that it can't locate the original file. Then it asks to either locate it or cancel, when I press locate it brings me to my itunes folder, but then I don't know what to do.
Go the the song in /Music/iTUnes/iTunes media/Music/Artist/Album/ folder then click Okay.
Similar Messages
-
Hey guys. My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error has occured(1015). I have no clue what to do and all and any help would be amazing.
See Here
https://discussions.apple.com/message/15290457#15290457
From the More Like This on the right... -
Need Help in installations and connecting displays. Please!
Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you. -
Need Help, Time capsule stoped connecting
need help, time capsule stoped connecting. the yellow light is flashing.
I have important file that can't lose them, how can I restore connection without losing all files?
Hope someone can help me
Best regards
Chico
Message was edited by: quicovaBest thing to do is connect your computer to the Time Capsule (LAN port) using an ethernet cable. Once connected, run Airport Utility and it should let you know why the light is yellow and attempt to fix the problem. If the problem persists, you should either re-configure the Time Capsule properly or conduct a hard reset and start the configuration over from the factory settings.
http://support.apple.com/kb/HT1300 -
I need to know how to connect with my Black Berry
Hi good morning, A few days ago I bought a 3rd generation ipad with wifi and I need to know how to connect with my Black Berry, as if this were the modem. Regards and thanks
The BB has to be set up as a wifi hotspot. After you do that just connect the iPad to the wifi network created on the BB the same way you connect to any other wifi network.
-
Problems accessing 1 remote desktop when connected with VPN
Hi everyone,
I have an ASA 5505 and have a problem where when I connect through VPN I can RDP into a server using its internal address but I cannot RDP to another server using its internal address.
The one I can connect to has an IP of 192.168.2.10 and the one I cannot connect to has an IP of 192.168.2.11 on port 3390.
Both rules are configured exactly the same except for the IP addresses and I cannot see why I cannot connect to this one server.
I am also able to connect to my camera system with an IP 192.168.2.25 on port 37777 and able to ping any other device on the internal network.
I've also tried pinging it and telneting to port 3390 with no success.
Here is the config.
ASA Version 8.4(4)1
interface Ethernet0/0
switchport access vlan 3
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.2 255.255.255.0
interface Vlan3
nameif outside
security-level 0
ip address 10.1.1.1 255.255.255.0
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network CTSG-LAN-OUT
range 10.1.1.10 10.1.1.49
object network CTSG-LAN-IN
subnet 192.168.2.0 255.255.255.0
object service RDP3389
service tcp destination eq 3389
description To DC
object network SERVER-IN
host 192.168.2.10
object network SERVER-OUT
host 10.1.1.50
object network CAMERA-IN-TCP
host 192.168.2.25
object network CAMERA-OUT
host 10.1.1.51
object service CAMERA-TCP
service tcp destination eq 37777
object network SERVER-Virt-IN
host 192.168.2.11
object network SERVER-Virt-OUT
host 10.1.1.52
object service RDP3390
service tcp destination eq 3390
description To VS for Master
object network CAMERA-IN-UDP
host 192.168.2.25
object service CAMERA-UDP
service udp destination eq 37778
object network CTSG-LAN-OUT-VPN
subnet 10.1.1.128 255.255.255.128
object network SERVER-Virt-IN-VPN
host 192.168.2.11
object network SERVER-IN-VPN
host 192.168.2.10
object network CAMERA-IN-VPN
host 192.168.2.25
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list AnyConnect_Client_Local_Print extended deny ip any any
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any any eq netbios-ns
access-list inside1_access_in remark Implicit rule: Permit all traffic to less secure networks
access-list inside1_access_in extended permit ip any any
access-list outside_access_in extended permit object RDP3389 any host 192.168.2.10
access-list outside_access_in extended permit object RDP3390 any host 192.168.2.11
access-list outside_access_in extended permit object CAMERA-TCP any host 192.168.2.25
access-list outside_access_in extended permit object CAMERA-UDP any host 192.168.2.25
pager lines 24
logging enable
logging buffer-size 10240
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RAVPN 10.1.1.129-10.1.1.254 mask 255.255.255.128
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static SERVER-IN-VPN SERVER-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
nat (inside,outside) source static CAMERA-IN-VPN CAMERA-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
nat (inside,outside) source static SERVER-Virt-IN-VPN SERVER-Virt-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
object network CTSG-LAN-IN
nat (inside,outside) dynamic interface
object network SERVER-IN
nat (inside,outside) static SERVER-OUT service tcp 3389 3389
object network CAMERA-IN-TCP
nat (inside,outside) static CAMERA-OUT service tcp 37777 37777
object network SERVER-Virt-IN
nat (inside,outside) static SERVER-Virt-OUT service tcp 3390 3390
access-group inside1_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.1.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP
-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
subject-name CN=SACTSGRO
crl configure
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 15
ssh 192.168.2.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 15
dhcpd auto_config inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password xxxxx encrypted privilege 15
username admin attributes
vpn-group-policy DfltGrpPolicy
tunnel-group CTSGRA type remote-access
tunnel-group CTSGRA general-attributes
address-pool RAVPN
tunnel-group CTSGRA ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:0140431e7642742a856e91246356e6a2
: end
Thanks for your helpOk,
So you basically have configured the router so that you can connect directly to the ASA using the Cisco VPN Client. And also the objective was to in the end only allow traffic to the LAN through the VPN Client connection ONLY.
It would seem to me to achieve that, you would only need the following NAT configurations
VPN Client NAT0 / NAT Exempt / Identity NAT
object network LAN
subnet 192.168.2.0 255.255.255.0
object network VPN-POOL
subnet 10.1.1.128 255.255.255.128
nat (inside,outside) source static LAN LAN destination static VPN-POOL VPN-POOL
The purpose of the above NAT configuration is simply to tell the ASA that dont do any kind of NAT when there is traffic between the LAN network of 192.168.2.0/24 and the VPN Pool of 10.1.1.128/25. This way if you have any additional hosts on the LAN that need to be connected to, you wont have to make any form of changes to the NAT configurations for the VPN client users. You just allow the connections in the ACL (explained later below)
Default PAT
object-group network DEFAULT-PAT-SOURCE
network-object 192.168.2.0 255.255.255.0
nat (inside,outside) after-auto source dynamic DEFAULT-PAT-SOURCE interface
This configurations purpose is just to replace the earlier Dynamic PAT rule on the ASA. I guess your router will be doing the translation from the ASA "outside" interface IP address to the routers public IP address and this configuration should therefore allow normal Internet usage from the LAN.
I would suggest removing all the other NAT configuration before adding these.
Controlling VPN clients access to internal resources
Also I assume that your current VPN client is configured as Full Tunnel. In other words it will tunnel all traffic to the the VPN connection while its active?
To control the traffic coming from the VPN Client users I would suggest that you do the following
Configure "no sysopt connection permit-vpn" This will change the ASA operation so that connections coming through a VPN connections ARE NOT allowed by default to bypass the "outside" interface ACL. Therefore after this change you can allow the connections you need in the "outside" interface ACL.
Configure any rules you need regarding the VPN client connections to the "outside" interface ACL. Though I guess they already exist since you are connecting there without the VPN also
I cant guarantee this with 100% certainty but it would seem to me that the above things should get you to the point where you can access the internal resources ONLY after when you have connected to the ASA through the VPN client connection. Naturally take precautions like configuration backups if you are going to do major configuration changes. Also if you are remotely managing the ASA then you also have the option to configure a timer on the ASA after which it will automatically reload. This could help in situations where a missconfiguration breaks you management connection and you have no other way to connect remotely. Then the ASA would simply reboot after the timer ran out and also reboot with the original configuration (provided you hadnt saved anything in between)
Why are you using a different port for the other devices RDP connection? I can understand it if its used through the Internet but if the RDP connection would be used through the VPN Client only then I dont think there is no need to manipulate the default port of 3389 on the server or on the ASA.
Also naturally if there is something on the actual server side preventing these connections then these configuration changes might not help at all.
Let me know if I have understood something wrong
- Jouni -
Need help in Creating DB manually with OFA
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiAbbasi wrote:
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
Edited by: EdStevens on Aug 16, 2009 8:46 PM -
Need help in creating Database connection to Apache 4
I desperately need help for my project. I'm doing a shopping cart project. Created a java bean to establish connection to my sql 7 server database. But the following always appear. I'm using dreamweaver mx to create my webpage and so I use its binding and components feature.
Here's the error message I always get..
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
An error occurred at line: 36 in the jsp file: /TMP8ouafocg7v.jsp
Generated servlet error:
C:\tomcat4\work\Standalone\localhost\ArtGallery\TMP8ouafocg7v$jsp.java:163: Class org.apache.jsp.DBConn not found.
DBConn connect = null;
^
An error occurred at line: 36 in the jsp file: /TMP8ouafocg7v.jsp
Generated servlet error:
C:\tomcat4\work\Standalone\localhost\ArtGallery\TMP8ouafocg7v$jsp.java:166: Class org.apache.jsp.DBConn not found.
connect= (DBConn)
^
An error occurred at line: 36 in the jsp file: /TMP8ouafocg7v.jsp
Generated servlet error:
C:\tomcat4\work\Standalone\localhost\ArtGallery\TMP8ouafocg7v$jsp.java:171: Class org.apache.jsp.DBConn not found.
connect = (DBConn) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "DBConn");
^
3 errors, 1 warning
Anyone out there, pls let me know the solution soon. Thanks!I was glad I came across this note. I recently started a tutorial on J2EE , and have run into exactly the same error. Have you found a solution? Can you share it with me?
Thanks..... -
Need help. importing pictures to timeline with various length.
Need help cant find old toturial
I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
BoIts called automate to sequence with unnumbered markers.
http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html -
Need help using Apple Hi-Fi with iPod Touch.
Are there any instructions for using an iPod Touch (third generation, iOS4) with the Apple Hi-Fi? I know it's supported from the Apple documents and I realize that it will not charge while using it but I just want to know how to make it work a little more consistently.
I had been using my 8GB iPod Mini with my Apple Hi-Fi in the bathroom. Recently I decided to start listening to Pandora and, maybe 4 times out of 10 I can get it to work just fine, but more often than not it will randomly shut down (every minute or so) or start playing through the iPod Touch's internal speaker and I need to keep restarting and/or undocking and re-docking until it's finally stable enough to run for the half hour our so I need. Once it finally works everything works (volume on the Hi-Fi, remote control, etc.). The display won't stay lit without changing settings but that doesn't bother me that much.
As I said, I have found the Apple documentation for the Hi-Fi that says it should work with the Touch (apart from charging) I just need some instructions on the proper way to connect and get it started initially. Any advice from people that have this working or even better any links to manuals or instructions that describe the correct way to do this would be greatly appreciated.The answer is yes. I am using my iTouch with iPod HiFi
-
I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?
I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?
-
Need help in installing JBOSS along with Jdk version
Hi,
I am using Linux 64 bit Machine.
I have Jdk1.5.0_18 and jboss-4.2.3.GA installed in my machine.
But the JBOSS Server is failed in booting.
What version of JBOSS Server needed for the 64 bit along with Jdk1.5.0_18
Any help will be needful for me
Thanks and RegardsThe name of this forum is "Database - General" not JBOSS, JDK, or "anything goes."
Please delete this post and post your question in the appropriate forum.
Thank you. -
Need Help Please: Audigy2 Value conflict with onboard sound
<SPAN class=postbody>System info: Windows XP Home Edition, 2.4 GHz IntelPent4, 52MB of RAM; DDR 200(33MHz), MSI MS-6547 (645 Ultra) motherboard. I need help! Sigh...well I am trying to put in a Soundblaster Audigy2 into my computer. I am under the impression that I have to disable and remove all onboard sound b/c it conflicts with the new sound card, ?. I currently have onboard sound ( AC97 Audio Controller ). I went to add/remove programs and removed the AC97 from there. I also went to MyComputer/Properties/Hardware/DeviceManager/Sound,Video,andGameControllers/AC97AudioContoller and deleted it. st Question: Under DeviceManager/Sound,Video,GameControllers...Do I need to remove the Legacy Audio Drivers? I know that I have to delete the rest of the drivers for AC97 and out of chance would Legacy be those drivers? I am guessing no...Also, is there anything else that I have to delete for the on board sound program to be gone? 2nd Question: I went to BIOS, and since I have windows XP home edition I think that configuration is a little different from what I read(I wont bore you with that). So, where do I go to "disable" the onboard sound in BIOS for Windows XP HomeEdition? Also, I read something about making sure the "Chip" was disabled but I could be paranoid. Do I need to worry about that? If you made it through all that text I thank you dearly. I hope that I can get some help from someone b/c I know nothing. I am afraid of making the wrong choice on BIOS and messing everything up. Thank You so Much! Ross Message Edited by RossRude3 on 04-06-2005 0:48 AM
Ross,
To fully disable teh onboard audio you would need to go into the BIOS to disable the Onboard Audio chip there. The manual with your motherboard or PC should have more detail on where exactly to find this setting, as it will differ per BIOS type. Generally it should be under a heading like Integrated Peripherals, and should be marked as the Onboard Audio chip, or AC97 Audio.
Cat -
Need help in Custom component creation with cq
Hi,
I have created my own component in adobe cQ and able to drag an drop in any page. for each instance I am seeing the copy of
component under node /content/mypage/commoncomp. If I edit the properties using design dialog I can able to store values as
expected.
Need help in
1) When I drag and drop the component it shows null for the property by deafult if I click save on edit dialog then the
value is showing. The default value is not shown by default while drag and drop my component it requires atleast one time to
click save from dialog using design mode
2) I need to use the default properties of the orginal components which is root and use the duplicated properties if incase user edit the properties of duplicated component. This may be too messy.... to be more clear
I want to use a common component in many pages but the properties of the components should be updated only when user edit it in design dialog utill then I need the page to use properties of root component.
ThanksYou just need to create your own version of PlumtreeTopBarView (original in com.plumtree.common.uiparts), and use CustomActivitySpace.xml to override that view with your own view. Your version would use some kidn fo logic to determine whether or not to display certain elements. TheUI Customization Guide should help quite a bit, and we have several quickstarts for overriding views you can start from.
Is there some Help file in PT that I can reference that will enable me to find what namespace does GetRequestURL() belongs to?I would simply do a string compare. Tokenize the URL into the base address / control arguments, perhaps splitting on the "?" symbol; then tokenize the base address on the ".". You'll end up with three strings. For portal.plumtree.com, the three strings would portal, plumtree, and com. You can then use those string in the logig you add to PlumtreeTopBarView.
David Phipps
Plumtree Software -
Please help me configure authentic connection with Caller ID via ISDN 30B+D using Cisco ACS
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi all
I have set up a dial up connection between to PC's at remote site and center. It using ISDN 30B+D which is configured on Router 3845. Currently I have configured authentic connection with username and password using Cisco ACS. To enhance the security configuration I want to authenticate both the phone number which dialup with Cisco ACS. And currently I have not done this. Please help me solve this problem.
Thanks so much
Longn1) I deleted bridge-utils, netcfg
2) I edited /etc/hostapd/hostapd.conf:
interface=wlan0
#bridge=br0
edited /etc/dnsmasq.conf:
interface=wlan0
dhcp-range=192.168.0.2,192.168.0.255,255.255.255.0,24h
and edited /etc/rc.local:
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0
ifconfig wlan0 up
3) I added in autostart these daemons: hostapd, dnsmasq and iptables.
Profit!
Maybe you are looking for
-
why does my iphone 5s not displaying apps on my jvc car stereo. these apps worked with my iphone 4s?
-
How to 'force in' the Depreciation Area for an Asset after it was created
Hi, When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'f
-
Skype wont work with my mac os 10.5.8
afternoon, tried to download skype on my power book g4 and it after download I try to open the dm and it says wont work with this artitecture. I am running 10.5.8 after I have download the dm the window that I should put it into the applications had
-
Photoshop cc is hanging when opening a file after I updated software a few days ago
I updated PS CC a few days ago, and now whenever I open a file to work on, it hangs and takes ages to load. The file appears but looks blurred in places then gradually loads completely and the blurring disappears, but takes at least three minutes to
-
Difference in these two statements
DELETE BACKUP COMPLETED BEFORE 'SYSDATE-7' DEVICE TYPE DISK; DELETE OBSOLETE; Both of these are actually deleting files but I don't understand the difference. The retention policy is set for 7 days. Why is it necessary to run the first statement? BTW