Need help posting to domain

I am trying to use Iweb to post to a dedicated domain. I have used Nvu and Iweb to create acceptable sites, but I run into a wall trying to get them to post with fetch. I thought I followed the instructrions for this and the results on .Mac are very acceptable. Publishing to a folder has worked as hoped as well. However, the process of loading to the internet using an FTP program is way, way over my head.
I am willing to pay a reasonble fee to somebody to help me get this thing up and running. Thanks.
Len Laviolette.
[email protected]
or
[email protected]

Here's a tutorial on using Cyberduck to do that, in case it helps:
http://karreth.com/iweb/Host%20To%20Other%20Than%20.Mac.html
Here are some other tips:
http://homepage.mac.com/thgewecke/iwebserver.html

Similar Messages

Need help isolating specific domain name extensions when validating emails

Dear fellow Java developers:
I am trying to write an application in Java using regexp in order to validate a form where a user submits their name, along with their email address. One thing I need to do as part of this application is isolate email addresses with certain extensions. For example, I would like to be able to test to see if a users email address has the top level domain extension ".ca", or has a second level domain extension of the form ".on.ca", ".co.uk", or ".org.uk", etc. Which means that if a user submits an email address that ends in .ca, or .on.ca, the block of code would be able to pick it out by checking against a predetermined regexp, and I would like the regexp to be able to check email addresses that contain a top level extension only(e.g. .ca), or addresses that contain a second level country code extension (e.g. .co.uk).
I tried using the following regexp in my java code, but for some reason, it is not working:
^[A-Z0-9._%+-]+@[A-Z0-9.-]+\.(?:[A-Z]{2}|com|org|net|gov|mil|biz|info|mobil|name|aero|jobs|museum)$
Like the above example, I would like a regexp that would allow me to specify the particular domain extensions that I am looking for ONLY, instead of being a generic one that allows all valid email addresses to pass through.
I have attached my java code that I am using at the moment below. For some reason, when I submit a command line argument of "[email protected]", I am always getting an output of "[email protected] is valid ? false" . Why is that? I can't figure this out, and would appreciate any help on this. I hope this question is clear to everyone.
Thanks in advance to all who reply.
package com.email;
public class Email {
         * @param args
        public static void main(String[] args) {
                // TODO Auto-generated method stub
                if( args.length == 0 ) {
                      System.err.println( "Usage: Email [...]" );
                      System.exit( 99 );
                for( int i = 0; i < args.length; i++ ) {
                        try {
                                System.out.println( args[i] + " is valid ? " + emailVerify( args[i] ));
                        catch( Exception e ) {
                                System.out.println(args[i] + " : " + e.getMessage());
        public static boolean emailVerify(String email){
                String regexp = "^[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\\.(?:[A-Za-z]{2}|ca|uk|au)$]";
       if (email != null) {
            return email.matches(regexp);
       } else return false;
}

I wouldn't bother with a regex, but I guess ymmv. I think this is much easier to read and understand:
private final boolean isInValidDomain(final String emailAddress) {
    if (emailAddress.endsWith(".ca")) return true;
    if (emailAddress.endsWith(".on.ca")) return true;
    // etc...
    return false;
}Depending on the number of tests and how often you'll change, you may want to put them in a Database/File and read them into a collection to iterate over.

Question...I'm new to mac and i movie...need help posting

I have videos in the imovie, they're currently under the event library...I can only seem to post videos from the project library though...and can't figure out who to move the videos from the event library to the project library to post on youtube......or is there a way to post from the event library and I'm just not seeing it....any assistance would be appreciated. thanks
lindseymac

Hi
Under the Project window there is a Plus signed button - to get new project.
Do this.
Thern in Event window select needed clips by Shift-Click on them then drag and drop them
into the new project. Done.
A very good Tutorial is Books written by David Pogue
• iMovie’09 & iDVD The Missing Manual
• iMovie’11 & iDVD The Missing Manual (comming april 2011)
Yours Bengt W

MSI P7N Diamond - New PC Build - Need Help Posting

I just finished connecting my P7N Diamond out of the case and powered on my new build for the first time and saw BIOS version, HDD information, and the bad checksum message on the screen. I also saw the "Press DEL to enter BIOS" and the "F2 To Continue" messages.
Pressing the DEL key on the keyboard resulted in nothing happening at all. I soon realized that the keyboard wasn't responding and I had no num lock light at all after pressing the Num Lock key multiple times. I started with a generic, USB keyboard and then swapped keyboards to an older, still working one I had with a PS/2 connector.
Still no keyboard lights but magically it entered BIOS after I plugged it in the PS/2 socket and immediately asked if I wanted to exit BIOS without saving. Pressing the "Y" key did nothing. Pressing <ESC> did nothing. The keyboard seemed frozen.
I pressed the RESET button on the motherboard and this caused a re-boot but now with a black screen (no messages at all). I powered it down, removed the power cords and then pressed the "clear CMOS" button. Re-connected the power cords and powered it on; but still a black screen. Powered it down, removed the power cords and removed the battery for 1 minute (I even pressed the clear CMOS button again). Re-connected the power cords, powered it up and still have a black screen.
I know this is the place where all the experts hang out, so any help will be appreciated.

Just an update...
New build is working very well at this point.
I've set the voltage in BIOS to 2.1 for the memory and installed Vista Ultimate, updated it via Windows Update site, applied the memory patch. I've discovered that I have a bad stick of memory as no matter what slot I place this one stick of memory in, the PC fails to post, so I'm running with 3x1GB sticks. I've ordered new memory that should be here today; Corsair TWIN2X4096-6400C5DHX.
The only problem I've encountered thus far is with one of my NVIDIA RAID arrays in "Degraded" status (mirror broken). This happened after I had applied the latest MS patches and a re-boot. I didn't suspect a HDD failure because the drives are new and the status of each drive was displaying as HEALTHY. I did my research on this site and discovered the solution which was to delete one of the two drives (I chose the one with the least amount of data) from the array and then added it back into the same array. The re-build took about 2 hours (they are 400GB Segate drives) and now it's working as advertised. I suspect a software problem caused this as one of the two drives was showing that it had less data (used) than the other drive.
My next steps are to install the new memory, test it with memtest86+ and then begin the OC ritual.
Thanks again for your help, Jason and Aaron Yuri.

I need help deleting my Domain in (Manage Site) cant find delete option

I keep getting a error message telling me that my domain already existing and to delete all files related to this domain, but I can't locate the delete option. Can someone point me in the right direction?

Hi,
What is the domain you are trying to add?
Kind Regards,
Aish

Need help resetting my domain!!!

Last year a purchased a domain. I have since deleted that domain, however now whenever I create a new site w/ iweb it continues to publish that site to my old domain. I cannot figure out how to delete this old domain from iweb.
I subscribe to mobile me and I only want them to host my site. My site is hosted there, however whenever I hit VISIT or PUBLISH on iweb it still brings up the old domain I no longer own.
Any ideas????

Just log into your MMe account and go to the personal section where it has enter domain name and click remove.
Whether you have a personal domain name there or not, iWeb is still publishing to MMe and not your domain directly, so whatever, you can still access your site by using web.me.com/username/sitename.

Need help locationg iWeb domain files

I cannot find my iWeb domain files. According to all the support information they should be in an iWeb folder called Domains under Application Support, but I have no iWeb folder there. I've searched with Spotlight and everything else I can think of but have had no luck. Any idea how I can find the iWeb domain files?

Thank you Ethmoid.
Are you any good with HTML snippets?
I am using the following code to create a pop up window.
<div style="width:50px; height:20px; font-family: Arial; font-size: 11px; text-align:center; color:#999999;">
<style type="text/css">
a:link {
color: #999999;
text-decoration: none;
a:hover {
color: #FFFFFF;
text-decoration: underline;
a:visited {
color: #999999;
text-decoration: none;
</style>
<A HREF="#" onClick="window.open('http://www.northgateshoppingcentre.net.au/Northgate/Legal.html','_blank','toolba r=0, location=0, directories=0, status=0, scrollbars=1, resizable=0, copyhistory=0, menuBar=0, width=450, height=300');return(false)">Legal</A>
</div>
I see on some websites that these windows pop up to a specified location i.e. the centre of the page and they also do not have the grey navigation bar at the top or the close, expand and minimise options. Do you know how to modify the code so that i can remove these and adjust the location?
Thank you

T400 LCD dim issue - Need help!!

I'm having a LCD dim issue with a T400. Have changed the LCD panel, LCD cable and systemboard but still having same issue. If i removed the lcd card, then the display is working fine. I've tested the lcd card in another working unit and it's working as well (means the lcd card is working). I use a working lcd card and plug into this T400 but LCD still dim.
I've try to switch the problematic lcd cable and lcd panel to a working systemboard and it kills the systemboard. Have try to switch a few things but still unable to find the root cause. Urgently need help on this. Any advice will be appreciated.
Model : 6475-RM5

hey bhoh
i suggest uninstalling your current graphic card driver, let windows install its own generic drivers and see if that makes any difference
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Newbie needs help comprehending CSS Password Manager functions

Hello All:
I own a TP W500 4062-27U running Windows 7 Ultimate. The computer is trouble-free.
I am seeking a solution to the following need: An application that will securely remember my passwords for various websites, etc. and enable me to log in using the fingerprint reader or similar.
I am aware that Lenovo provides both Fingerprint Reader software and Client Security Solution software, but I don't know whether or not either one (or both) of these applications will provide the functionality I am seeking. I have spent a fair bit of time looking around the Lenovo website, but cannot find a document that describes (in a general, overview manner) the functionality that CSS provides.
I don't need to log into VPNs, or company networks, or anything really fancy like that - I just need something that will enable me to log into about 20 different websites, using a different password for each website. Right now, I'm generally using the same password for every website (that way, I can remember what it is), and as I think you will agree, that is probably not a very good practice so far as security is concerned.
If anyone could point me towards a document that explains how I can get CSS to do what I want it to do, I would be very grateful. If CSS does not have the functionality I am seeking, I would very much appreciate a recommendation of software - possibly non-Lenovo - that does provide the functionality I am seeking.
Thanks very much for your assistance.
Michael

Hi PanEuropean2,
Welcome to Lenovo Forum!
In regard to your question, Client Security Solution (CSS) should be the right fit for you.
I have a T410 with Win 7, and have several passwords to remember which is really killing me. However, by using CSS, Fingerprint software and Password Manager, I need to enter all the passwords only once when access a website or a tool, and let it saved in CSS.
The next time i turn on the machine and open up a website which needs user ID and password, I just need to swipe the fingerprint that I've enrolled, then viola!
Just take note that after the first swipe of fingerprint, tools or website that are to be accessed later will automatically show the password in the box directly without having to swipe fingerprint again. You just need to click to log in. I"m not sure if this is the experience you're looking for, however, no harm to give it a try.
Here's the user guide for CSS. It has
Client Security Solution components
Client Security Solution installation considerations
Client Security Solution features
Hope this helps
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

T400 + WIndows 7, need help with drivers

Hello.
I have just installed a copy of W7 Pro on my T400 but i got some devices in the device manager which i do not know what is.
I Have installed "everything" from http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72858
but I could not install the following:
-Local Manageability Service and Serial Over LAN (Intel AMT 4.0) Windows Vista, XP
-Management Engine Interface (Intel AMT 2.6) Windows Vista, XP
The first i managed to install by going to the intel site and download the newest version but the second one wont install nor will the version on the intel download site.
So far i have the following devices missing drivers:
3xBase System Device
PCI Serial Port
PCI Simple Communications Controller
Hope you guys can help me.

Hi Wouz,
I am sorry that the windows 7 drivers are not fully released yet but we have some beta version of drivers. Please check if you can find what you need here. However, it does not cover all of Lenovo products as yet. Lenovo has a large amount of product models to support. Please bear with us and we shall release the drivers soon after the Windows 7 launch in 22nd Oct 2009.
Thank you very much for your patience.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need help with a bios/cmos

Hi guys
Having a problem with a backlight which does not turn, I have reached a conclusion that i need to reset bios/cmos..
Looked through the manual guide, nothing there about the bios and stuff like that
Tried to take off the system battery which is inside of a laptop and was not able to do that cuz its stucked or something
Any suggestions??
kind regards
Laptop: x121e

hey Almas87,
is your unit's bios at version : 1.09/1.11 ? If it isn't do update.
Also, try uninstalling and reinstalling the Hot Key software.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Need help on join query

Hi All,
Please help me on the below join condition,
>SELECT * FROM ESTIMATE_LINE WHERE JOB_ID = '214582' AND ESTIMATE_ID = 2;
Output : Returns 1 row,
>SELECT * FROM ESTIMATE_ACCOUNTING_LINE WHERE JOB_ID = '214582' AND ESTIMATE_ID = 2;
Output : Returns 3 rows,
I would like to add these two outputs as on, Finally i've to get 4 rows in the output,
For that am writing the query like this,
SELECT EL.*,EAL.*
FROM ESTIMATE_LINE EL,
ESTIMATE_ACCOUNTING_LINE EAL
WHERE EL.JOB_ID = EAL.JOB_ID (+)
AND EL.ESTIMATE_ID = EAL.ESTIMATE_ID (+)
AND EAL.JOB_ID = '214582'
AND EL.ESTIMATE_ID = 2,
It is not giving the exact output, the common fields are there in the join condition,
Can some one please re write the query for expected output..
I am trying it but not getting the exact output,Unable to find out where the mistake is ...
Thanks,
gra

Hi,
First, let me make sure I undersatnd the problem.
You have a query that lookas for information about a given job_id and estimate_id the estimate_line table. This query produces X rows.
You have another query that lookas for information about the same job_id and estimate_id the estimate_accounting__line table. This query produces Y rows.
You want to get the same results in one query that produces X+Y rows.
That sounds like a job for UNION, not a join.
If the two queries produces the same number of columns, and the data types of the columns are similiar, then you can just write the two queries together. Instead of a semicolon at the end of the first query, you'll say UNION (or UNION ALL):
SELECT * FROM ESTIMATE_LINE WHERE JOB_ID = '214582' AND ESTIMATE_ID = 2
UNION ALL
SELECT * FROM ESTIMATE_ACCOUNTING_LINE WHERE JOB_ID = '214582' AND ESTIMATE_ID = 2;If the columns are not the same, you'll need to call some conversion functions, or add literal columns (such as NULL) to the queries.
If you need help, post a little sampe data (CREATE TABLE and INSERT statements) and the results you want from that data.

Spilled Liquid on Keyboard!!!!!!! NEED HELP

Spilled Liquid on Keyboard!!!!!!! NEED HELP
Posted: Jun 23, 2009 6:32 AM in response to: ovacs Reply Email
Hi,
I spilled juice on my keyboard and at first it was just my left shift key that didnt work then the keyboard would only be in caps. Now it is acting really slow as well when I open and close things it looks like its sucking them away.
I took it into an apple retailer who said to keep it tipped upside down for a day and said he could replace the keyboard. Then I went to a Apple store (one on their site) who said they could open it up (for more of a cost) and see what was wrong.
Any advice would be great. Is it fine to just put it between books and keep the keyboard facing down. Blowdry?
Thanks

Liquid spills are usually disastrous — more so when the spilled liquid is sugary and acidic like fruit juice. Your keyboard will certainly need to be replaced because the keys will become sticky as the liquid dries. Your warranty is now substantially or wholly invalid too, so not only will the spill repair not be covered, but subsequent problems you might encounter won't be covered either, at least not unless you pay Apple to go through the machine completely and replace every part that was affected by the spill. I'm not sure whether your warranty would then be reinstated or not. I hope it would. You should ask.
Simply letting the machine dry with sugary residues inside will be a mistake: Whenever the weather is humid, the sugar will draw moisture out of the air and get sticky again, and the acids in the juice residue will corrode any metal parts with which they are in contact. That's a recipe for a short-lived MBP.
Read this article:
http://www.tekserve.com/service/spill.php
Tekserve is obviously interested in promoting its own services, but the article also contains a lot of good information about what must be done to clean and repair a spill-damaged Mac.

Need help sourcing Lenovo Soleil S620 drivers or restore disk

Hi all,
I have in front of me an ancient tablet PC from Lenovo known as a "Soleil S620". I believe it was an Asian-market only product.
From this webpage (http://www.howah.com.cn/news/en/news_detail.asp?id=50):
"Lenovo Soleil S620 - The world’s first notebook computer with rotatable LCD monitor"
"Soleil S620 is the world’s first notebook computer with an 180o-rotatable 12" TFT-LCD display. The TFT-LCD display has gone through rotation test of over 20,000 times. The product is also the lightest 12" notebook in the market, which is only 17.8mm thick and weighs a mere 1.6kg. Embedded with Intel’s Centrino chip, Soleli S620 is the only notebook of such a light weight that is preinstalled with Bluetooth technology."
It's a cute, lightweight and slow little number, and somewhere along the way someone wiped the drive and installed a non-genuine copy of Windows XP (in Chinese, too). I'd like to return it to its Windows XP Tablet PC Edition roots if possible.
I'm betting a restore disk is going to be hard to come by, so if I have to just reinstall it with a genuine copy of XP without enabling the tablet transformation and touch screen, etc, that's fine, but sourcing the drivers is going to be difficult.
Help? Anyone? Thanks in advance!

sorry but this is the closest thing i can find and sorry for it is written in chinese
http://support1.lenovo.com.cn/lenovo/wsi/Modules/Driverdownload.aspx?SearchType=1&LogicType=1&Machin...
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

K330 Motherboard replaced but need help.

I got the motherboard replaced from the recall. But the problem is the tech did not put in the Model # and serial on the motherboard. Is there any motherboard manuals that might tell me if the specs have been upgraded etc??
From CPU-Z:
DMI BIOS
vendor   LENOVO
version   DKKT20AUS
date   03/16/2011
DMI System Information
manufacturer  LENOVO
product   INVALID
version   Lenovo Product
serial   INVALID
UUID   {FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF}
DMI Baseboard
vendor   LENOVO
model   To be filled by O.E.M.
revision  To be filled by O.E.M.
serial   INVALID
DMI System Enclosure
manufacturer  To Be Filled By O.E.M.
chassis type  Desktop
chassis serial  INVALID
DMI Processor
manufacturer  Intel
model   Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
clock speed  3400.0 MHz
FSB speed  100.0 MHz
multiplier  34.0x
DMI Port Connector
designation  J1A1 (internal)
designation  PS2Mouse (external)
port type  Mouse Port
connector  PS/2
DMI Port Connector
designation  J1A1 (internal)
designation  Keyboard (external)
port type  Keyboard Port
connector  PS/2
DMI Port Connector
designation  J2A1 (internal)
designation  TV Out (external)
connector  Mini Centronics Type-14
DMI Port Connector
designation  J2A2A (internal)
designation  COM A (external)
port type  Serial Port 16550A
connector  DB-9 male
DMI Port Connector
designation  J2A2B (internal)
designation  Video (external)
port type  Video Port
connector  DB-15 female
DMI Port Connector
designation  J3A1 (internal)
designation  USB1 (external)
port type  USB
connector  Access Bus (USB)
DMI Port Connector
designation  J3A1 (internal)
designation  USB2 (external)
port type  USB
connector  Access Bus (USB)
DMI Port Connector
designation  J3A1 (internal)
designation  USB3 (external)
port type  USB
connector  Access Bus (USB)
DMI Port Connector
designation  J9A1 - TPM HDR (internal)
DMI Port Connector
designation  J9C1 - PCIE DOCKING CONN (internal)
DMI Port Connector
designation  J2B3 - CPU FAN (internal)
DMI Port Connector
designation  J6C2 - EXT HDMI (internal)
DMI Port Connector
designation  J3C1 - GMCH FAN (internal)
DMI Port Connector
designation  J1D1 - ITP (internal)
DMI Port Connector
designation  J9E2 - MDC INTPSR (internal)
DMI Port Connector
designation  J9E4 - MDC INTPSR (internal)
DMI Port Connector
designation  J9E3 - LPC HOT DOCKING (internal)
DMI Port Connector
designation  J9E1 - SCAN MATRIX (internal)
DMI Port Connector
designation  J9G1 - LPC SIDE BAND (internal)
DMI Port Connector
designation  J8F1 - UNIFIED (internal)
DMI Port Connector
designation  J6F1 - LVDS (internal)
DMI Port Connector
designation  J2F1 - LAI FAN (internal)
DMI Port Connector
designation  J2G1 - GFX VID (internal)
DMI Port Connector
designation  J1G6 - AC JACK (internal)
DMI Extension Slot
designation  J6B2
type   A5
populated  yes
DMI Extension Slot
designation  J6B1
type   A5
populated  no
DMI Extension Slot
designation  J6D1
type   A5
populated  no
DMI Extension Slot
designation  J7B1
type   A5
populated  no
DMI Extension Slot
designation  J8B4
type   A5
populated  no
DMI OEM Strings
string[0]  DK20A
DMI Physical Memory Array
location  Motherboard
usage   System Memory
correction  None
max capacity  32768 MBytes
max# of devices  4
DMI Memory Device
designation  A1_DIMM0
format   DIMM
type   unknown
total width  64 bits
data width  64 bits
size   4096 MBytes
DMI Memory Device
designation  A1_DIMM1
format   DIMM
type   unknown
total width  64 bits
data width  64 bits
size   4096 MBytes
DMI Memory Device
designation  A1_DIMM2
format   DIMM
type   unknown
total width  64 bits
data width  64 bits
DMI Memory Device
designation  A1_DIMM3
format   DIMM
type   unknown
total width  64 bits
data width  64 bits
size   4096 MBytes

hey skimore,
i would suggest to cross reference with your current setup with this >>
http://www.lenovo.com/psref/pdf/icbook.pdf
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Need help posting to domain

Similar Messages

Maybe you are looking for