NEED HELP RE:VERIZON WEBMAIL ISP FILTERS; I HAVE VERIZON FIOS

I hope someone can reach out and help me.  Recently I have not been receiving my QVC Today's Special Emails on a Daily Basis; since approximately the beginning of September.  I have Verizon Webmail.
I never had a problem receiving these daily emails before.
Did Verizon change something within in the Server, etc.?
I contacted QVC they said to contact my Internet Service Provider. They have everything correct on their end.
They send them out a few minutes after midnight on a daily basis. They said if My ISP service/server is busy or maxed out this could be a reason why I haven't been receiving them.
I have the correct Contact Email in the my contacts.
How Do I adjust the Internet Service Provider Filters?
Or does anyone have another way so I can fix this problem.
P.S.. I check my spam and it is not in there either.
Many Thanks.

Yeah, that happens all too often with Verizon email.  You get email reguarly from a legitimate source.  One day the email just stops.  The sender does NOT get any failed mail messages and from the POV of the sender they sent email succesfully to you.  The email is lost in the Verizon Ether.
Go to the Verizon email account holder WhiteList form and complete it.
http://my.verizon.com/micro/whitelist/RequestForm.aspx?id=member
Send the below URL to QVC and have QVC fill out the ISP WhiteList form
http://my.verizon.com/micro/whitelist/RequestForm.aspx?id=isp
Good luck !
The Lithium Software sux !!

Similar Messages

  • I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.

    I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.  I have gone to my app folder and tried to update my iPhoto Library.  I have gone to my trash and brought it over to my desktop and still cannot use it.  Please help!

    Try this fix discovered by User photosb189:
    From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
    Select Library from the drop down menu
    Then navigate to Application Support > iLifeAssetManagement > assets
    Right click on the 'sub' folder and choose Compress
    Drag the resulting zip file to your Desktop (as a backup)
    Go to your System Preferences and choose iCloud
    Turn OFF the iCloud Photos option
    Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
    Now, in System Preferences, turn the iCloud Photos option ON
    iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

  • I need help with my text tone and I have ring tone. no text tone for the 4s.

    I need help with my text tone. I have ring tone no text tone. I have a 4s.

        Hi Sarar2333!  Let's get your text tones working again!
    Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a.  You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting.  Let me know how that works out for you.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Hi I need help please .... I have my credit card information in my account ... But I wanted to delete

    Hi I need help please .... I have my credit card information in my account ... But I wanted to delete & I like too add a App Store card

    Hi, Ajchenicholas. 
    Credit cards attached to an Apple ID can be removed and payment method changed to none as long as there is not an outstanding balance.  The article below will walk you through this process. 
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    You can always add an iTunes Gift Card to your account at any time.  Here are the steps that will walk you through adding an iTunes Gift Card. 
    iTunes Store: How to redeem a code
    http://support.apple.com/kb/ht1574
    Cheers,
    Jason H.

  • I need help in reinstalling photoshop.I do not have the original disk. How can i reinstall PS?

    I need help in reinstalling photoshop.I do not have the original disk. How can i reinstall PS?

    Which full scale version of PS do you need?  
    Nancy O.

  • HT2204 I need help to change my security questions I have forgot them

    I need help to change my security questions I have forgot them

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • Need help with Verizon DSL & Windows XP

    Hello All,
    I am personally running Verizon FIOS without any problems. However, my father-in-law still has Verizon DSL, which he has been using without any problems for the last 4 years until now.
    To make the long story short, it seems that the LAN card that came with his old Dell PC died. I pulled it (there is no LAN NIC on the motherboard), and installed a new LAN card, which supports 10/100 MBps and is RoHS complient. However, for some unknown still to us reason, he is getting the LAN "Limited Connection" error.
    I have tried everything I could think of, and spent over 6 hours with 3 different Verizon DSL tech support folks. However, we cannot even get to 192.168.1.1 (which is the address of the Westell 6100). I have tried even slowing the LAN card to 10 Mbps / Half-Duplex (or Full). TCP/IPv4 is set to obtain IP / DNS automatically and etc...  It's also set to DHCP.
    We know fo sure that his Verizon DSL connection does work. Why? Because when I plugged in the same Ethernet cable into a laptop that I brought with me, we had an instant Internet connection (running Windows 7).
    So it must be something within Windows XP that is blocking access. I am trying to do everything to not having for him to buy a new computer at this time and save the current system.
    I have deleted any and all Network cards drivers in the Control Panel / System / Devices. I have NOT messed with any registry tricks, but am now willing.
    Any and all help with suggestions is greately appreciated.

    Best guess is that you need a WindowsXP compatible driver for your new LAN card.   You definitely need a driver, so if you "deleted any and all Network cards drivers" it isn't going to work.  Go to the company website for the new LAN card and they should have a suitable driver.
    There should not be any need to mess with the registry.

  • Need Help Putting Together a rMBP so I Have Everything I Need...

    Hello-
    I am having trouble getting the right kind of help from "Chat Now" on apple.com and calling in to get my questions/needs taken care of so that when I get the rMBP I will be sure I wil have what I need to go right online and teach the online courses. I even went to the local apple store and woked with a couple sames guys there, but they were not clear in a couple situations on what I would need with the different options the rMBP gives. so I am truning to the great apple forum for additional help.  this might be too much to ask even for tis forum, but if I can learn a little at a time, maybe I can gradually gain the knowledge I need to have a complete and functioning home office for my personal computing needs and my needs as an online teacher at a university back East. My technical knowledge is not the best, so as far as the rMBP goes, a big problem for me is that I do not have the knowledge to make sure I order everything I need with the changes a new rMBP will bring to my current setup (which is just a basic MBP using a wireless router and a USB cable for the printer that I just connect when I need to print). I realizee my current set up on my desk is not the most advanced, but I would need a pro to come to my office and help me get the best set-up for what I am curently using. It seems that the agents I chat with and/or talk to on the phone are aslo lacking in knowledge to help me put together a rMBP that will be ready to fully use and have with the order all that I need so that I do not have to order additional items in a mad rush to be ready for the courses I am teaching online. I have read several articles about the rMBP so that I cold have some knowledge about what I will need but as I said my techie knowledge is lacking. I am looking at the 15" rMBP with all of the full upgrades that the configure option allows one to get. I am not clear if I do run into trouble with my wi fi and have to use my ethernet cable what I will need to do this. I also have programs that are older that I am guesing I will need to install using a DVD player. I would like to hook up the printer I have or a new Canon printer and use it wirelessly, but for now I will most likely be using it with a USB cable. I am not clear on the thunderbolt technology and if I should get any of these cables for any of the connections. I also would like to get a great speaker system and will need to hook that up, but I am not clear on the best way to do this. I have been wanting an iMac, but I am not sure what is a good slection to get and how to connect it to the rMBP or one of the other 2 older MBPs I currently have.
    If somebody could list for me what I would need to have a complete rMBP that will allow me to do these hookups and connections and explain what would be the best way to complete the various connections so that I have all that I will need to get up and running, I would really appreciate it. Because I do not have any USB 3.0 cables or cables for various additional connections, I would need help/suggestions in this area. I realize this is hard to do not seeing my office, but since I will be starting new with the purchase of the new rMBP and hopefully an iMac (and a new Canon printer and new set of great sounding speakers) getting some advice on what I should order for the various connections would be a hugh help. Part of the problem is with the rMBP and not having used one of these in the past. I know some of the differences with this machine like the lack of an internal SuperDrive and the new ports, but I do not know what cables I will need that will utilize the newer technology this machine and an imac will bring to my office.
    Any suggestions are greatly appreciated, even if you do not give me specific answers, but an idea, for example, of what I might need to connect the speaker system (knowing the best way the new speaker system shold be connected to the rMBP and/or the iMac. I am not even clear if I do want to use the iMac with the rMBP for teaching with a larger display what I will need to connect the imac to the rMBP. is this done by an HDMI cable and if so is there a specific type or example you could mention that is on apple.com?

    There are many differences with the new rMBP. There are ports that I am not sure what I would use them for.  Even the ethernet cable I use now to get the internet will not work with the rMBP.  I thought there would be some additional help on here.  as far as configuring the rMBP there are just a few options but the differences between an older MBP and the new rMBP is great.  No need to reply I will turn off email notifications. I gave as much information as I did because in the past I was told to give more information.

  • Need help installing verizon security suite

    i am trying to install verizon security suite on another computer can someone help me

    Hello Stephanie2686,
    I just replied to PAUL65NYC who was having a similar issue.  Here is what I wrote:
    I found this page that might be of some help:
    http://www.verizon.freedom.net/download/download-vsp.html?upgrade&cons
    You will need to log in with your verizon.net account in order to access this page.
    If this does not work, you will have to call the Verizon Online Technical Support at (800) 567-6789.  
    Please reply to this message and let me know if this worked for you.
    Regards,
    Kathleen
    Verizon Forums Team Administrator
    Let me know if this applies to your situation or not.
    Regards,
    Kathleen
    Verizon Forums Team Administrator 
    Kathleen
    Verizon Telecom
    Online Center of Excellence
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Need help with SMS message telling me I have a voice mail, need to get rid of that

    I have done a few searches on the internet and have found nothing that fixes my problem.
    I use two message boxes/folders, one is for phone calls and the other is for SMS/MMS messages.  I need to keep these this way (I am not searching though 100 text messages to find a phone number that is critical).
    The problem occurred after I downloaded a new update (Jan 11th, 2010; think is like version 4.6 or something).  Before, if I got a call it showed up in my call message box/folder and if they left a voice mail I have a special ring tone for voice mail messages.   I also had it when I got a SMS/MMS message it went to its own "mailbox/folder" and had its own ring tone when a new one was sent.  Now when I get a voice mail message due to the fact I also get a SMS/MMS message I only hear a text message ring tone (not good).
    I need to know the instant I get a voice mail, the text messages are a nice thing to have for my significant other and friends.  If I walk out of a location that I did not have reception and I get a voice mail, I now think its a text message and get to it when I can even though I needed it then.
    Example: just think of leaving a building with your hands full heading to point B, when the voice mail told you a correction and divert to point C;
    voice mail = hold everything and get the message all good
    text message = head to point B, see a problem and pray you get to point C before anything bad happens).
    I went to my local Sprint/Nextel store and they told me there was nothing I could do.
    If this can't be fixed I will be forced to get another cell, then everyone including me will sufer because we will have to pay for it (just think taxes).
    I feel exahusted in looking for a solution, if there is not one then blackberry needs to do an update.
    Provided its a software problem that needs an update or maybe I am not to bright to find where to turn this off.
    My questions about this would be:
    1.  How does the phone get a text message, does it generate it from my phone number or the phone number where my voice mail is sent
    2.  Once I know which number it is being sent from, can I put a text block on it
    3.  Last but not least, will it solve the problem?
    Thanks
    Incase it does not show up I have a Blackberry Curve 8350i from Nextel OS V4.6.313

    This is a peer-to-peer community.
    All people responding are user just like you.
    However, many of are users have solved many problems for other blackberry users in need of assistance.
    If you see you haven't been responded to in a long time, just reply 'bump' on the same thread you originally posted.
    The term 'bump' is used because a thread remaining unanswered usually moes down the list and gets lost in older pages. By replying to a post, it gets moved ("bumped") back to the top of the first page of that category.
    If you see a solution to your problem, feel free to mark it as a solution. Also you can thank the user who helped you or give him a 'kudo'. A 'kudo' is the little star found underneath the avatar (picture) of the user. It's like giving them credit for the work they did.
    Welcome to the community! We hope to see you posting soon.
    Sincerely,
    jakoby4204
    Jakoby4204                                                                                                 New to the Community click here  
    Community Moderator

  • Newb here, need help! just check out what i have, make reccomendations please!!

    Windows xp 32-bit,
    4 gigs ram,
    dual sli 7200 nvidia cards,
    60gb internal hardrive, 1.5 terabyte external hard drive (brand new, very empty)
    Recorded 24p and 60i on a Canon XL-2 (miniDV)
    IEEE 1394 firewire connected from pc to uploading device. Unfortunatly i borrowed the xl-2 from school, and am trying to capture from a panasonic pv-gs36 i borrowed from a friend (only friend with a device that records with a miniDV cam).
    I have been working fine on premier, very smooth when i import files, but when i tried to capture, as soon as i hit capture it freezes my whole set up, i have to manually restart my pc. I need to capture and export these clips to quicktime so i can edit in final cut at school (as requested by my instructer) the project is due in exactly one week, and the edit bays are always full which is why i opted for capturing at home with premier cs4.
    Im in panic mode now though, cause of this freeze issue. I'll have access to an xl-2 for the remainder of the week if the panasonic cam is the problem, but if not, please let me know!! ill go out and buy a new graphics card if that really is the issue... but i cant afford the quadro....which is why i opted for adobe premier instead of avid.
    im thinking its freezing because i recorded on an xl-2 and am trying to capture on this panasonic cam... could this be why?
    i installed premier on the 60 gig internal hard drive...should i uninstall it and install it on the external 1.5 tb one? should my settings be a certain way when i start a new project? Please help out a stressed out student during finals week! I will be super grateful to any info anyone can provide. thanks again for all your time and effort =)

    I'm unsure if the external drive is eSATA. I did buy it a few days ago 1.5 tb for 129.99 at fry's...good deal. What are the advantages of having an eSATA? The drive i have is a seagate Free agent-Desk external drive, model number st315005fda2e1-rk
    <img src="http://www.thinkdigit.com/uploads/seagate_freeagent_desk.jpg">
    Again, total noob here...
    the external is USB 2.0, and yea, i only have 1 firewire port. Also, something i failed to  mention is...I actually run my computer off my 42 inch samsung hd tv (720p native). When i was installing the whole production suite it asked me to get a moniter with higher resolution, but the click top continue installing anyway button was there so i went for it. Could this be the problem?
    I'm fairly sure i recorded in standard play with 2 channel audio with the canon, so im starting suspect it is this dinky panasonic dv cam thats causing me all this headache.
    also....please dont insult me too much...but:
    whats a panny?
    Whats scenalyzer?
    annnnd finally, no input on the cards? I was thinking that was going to be the problem for sure. The cards are great for gaming but im not really sure what kind of cards are (at least decent) for editing and capturing.
    I appreciate your help, ive been looking at the boards all night and this morning, i noticed you are kind of a superstar around here Millaard, so i really appreciate the effort =)

  • I need help getting my music and videos to have sound again.

    Today I noticed that the sound (music, games and videos) was not working on my Iphone 4.  I can still hear updates, phone calls, ringing, text messages etc.  I have backed up the phone and restored it, but that didnt work.  If I plug head phones into the phone that works.  I dont understand.  Does anyone have any suggestions beforeI take it an Apple store or just get a new phone.

    Hi jenanoch,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Phone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    - Judy

  • I need help with Changing my Security Questions, I have forgotten them.

    Its simple, I tried buying a Gym Buddy Application and I had to answer my security questions... Which I have forgotten I made this a while ago so I probably entered something stupid and fast to make I really regert it now. When i'm coming to this...

    Hello Adrian,
    The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    If you continue to have issues, please contact our Account Security Team as outlined in this article for assistance with resetting the security questions:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I need help resetting my iCloud email address. i have erased all y data to solve a bug problem. I re-entered my email incorrectly; putting hitmail instead hotmail.

    Please help. I had clitch on my iphone. i was advised to reset my phone to factory settings. I successfully erased all the data. when i came to restore the software and back up data on to my phone I accidentally put the wrong email address whilst setting up my iCloud account. Instead putting in hotmail i put hitmail. I've tried to edit the email address, but I'm unable to. I've tried to erase the data again but I'm prompted to turn of the 'find my iphone' app. i can't do this because it ask for apple I'd; which I can't access because I've entered the wrong email.
    Please help!!!!!!!!!!!!

    Force it into recovery mode and restore it again, as explained here: http://support.apple.com/kb/ht1808.  Then set it up again using the correct address.

  • Need help with my Zen Touch. I have no clue what's wro

    I downloaded some firmware a few weeks ago, and ever since then my Zen Touch hasn't been working properly. My current is version .0.03. As soon as I downloaded that my computer would not detect the player. When I plugged it in the USB I got three quick low pitched beeps, and then nothing. Since the player isn't connectng to my computer of course I can't transfer any music. I've tried to get it to connect a million times but it's always the same. I evn tried it on another computer so I'm guessing something's wrong with the player itself.
    Can anyone hel me please?Message Edited by Shart780 on 02-4-2006 08:09 AM

    because they are needed to detect your player, that is!
    just try it out, you'll do no harm by doing so

Maybe you are looking for

  • Images are missing in Project Manager

    I'm replacing old images with new ones in RoboHelp HTML 10. I've deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don't feel

  • How do i find the link for my adobe revel photo gallery

    How do i find the link for my adobe reveal gallery?

  • FI Posting Simulation

    Hi All, I have a problem related to FI document posting. I am getting a file from my presentation server and this file has 4 different types of document in it. Now I need to process my file such that either all the documents are posted successfully o

  • Panasonic KV-S2026C scanning problem in Acrobat Pro 9

    With the most recent update, the Panasonic KV-S2026C scanner does not support memory mode. Please see the workaround listed for the Kodiak i1220 at: http://kb2.adobe.com/cps/404/kb404291.html The issue arises when scanning, where the scanner may scan

  • PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus

    PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus.  The tagline in my email prints, but not the attached PDF.  These are unsecured PDF's created by printing to PDFCreator, saving the PDF, then attaching and emailing t