Need help with  effect to sing vocal hook with

I have to sign a hook along with a singer but i'm not a singer i'm a rapper, can anyone point in the direction of an effect that would help smooth me out or even give my voice less cringing ability. I've been reviewing artists who sing (not well but good enough on a track) and need to figure out how to achieve this sound. I am providing a link to an artist named hard target.
http://www.myspace.com/hardtarget
I will either be doing this on logic express or garageband

Hi,
try these effects:
- pitch correction
- vocal transformer
- compressor
- limiter
- EQ
I'm afraid I could write at least 10 pages about this subject... experimenting will be the best thing to learn!
Kind regards,
Jaap

Similar Messages

  • Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

    Hi,
    I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
    Integration Gateway: General Connection Failed (158,10836)
    This error is thrown when there is no valid response.
    Possible errors include:
    Bad gateway URL
    Sync Service Timeout set and Service actually timed out.
    Java exception thrown - Check Application Server for possible Java exception

    Do you have integration configured between the two systems?  It sounds like you don't from the error.  Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working.  If you haven't done that, it's documented a hundred different places.
    http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

  • Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

    Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit.  The program installed ok and the S/N took.
    The program does record video and audio HDV M2T.
    The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p.  4:3....
    The scopes respond as do the audio components when recording. (with a blank monitor component).
    The video does play back on my system no problem.
    Any ideas?
    Dan

    Moving the discussion to OnLocation
    Thanks,
    Atul Saini

  • Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

    Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

    If you've had it for less than a year, then it's still under warranty.  Take it to an Apple store or an authorized service facility.  See http://support.apple.com/kb/HT1434

  • Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.

    Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?

    Do you have Restrictions turned on?

  • I need help activating my iphone 4 cdma phone with straight talk please

    i need help activating my iphone 4 cdma phone with straight talk please .. i have the starter kit just need help activating it please

    Settings > General > About.
    -> iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

    Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

    I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone.  It works well for me for the past couple of years.
    As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
    As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

  • Need help!!!! GUI problems with netbeans

    i have a problem with the interface i created using netbeans.
    i created a JFrame, inside it a JDesktopPane, and inside that 3 JInternalFrames. the problem is in one of the JinternalFrames, i have 4 radio buttons which i forgot to add to a buttongroup and whenever i try to do that, the GUI doesn't work anymore. The bigger problem is that if i undo the changes, the thing still doesn't work and i have to copy my backup project folder over the one i work on to get an output.
    i tried to edit the source code to add the 4 buttons to a button group but netbeans won't let me since i created the buttons thru it not by writing it myself
    please i really need help with this and i hope its a stupid thing i'm just overlooking.
    If u need the code, i will gladly post it.
    thanks in advance

    if you're not using a netbeans-specific layout manager, copy the working code
    into notepad, make the changes, then compile and run from the command prompt.
    if all works OK, dump netbeans

  • Need help identifying effect in RH8

    Hello!
    I recently installed RH8. I was looking at the Help (Adobe
    Help Viewer 2) and found a cool effect in the Help that I would
    like to use in my project, but I'm not sure what it is. It looks a
    bit like a DHTML drop-down hotspot, except the hotspot is removed
    when clicked.
    Here's how it works: There is a hotspot phrase ("View full
    size graphic") and a small graphic underneath. When the phrase is
    clicked, the phrase and small graphic disappears and is replaced by
    another hotspot ("View small graphic") and the large graphic. So
    you can click back & forth, replacing the hotspot & graphic
    displayed each time.
    This effect can be found in the Adobe Help Viewer 2, under
    Exploring the workspace>Workspace overview.
    I'm not an expert, but when I've used the DHTML drop-down
    hotspot, the hotspot remains on the window when clicked. I also
    played around with the trigger/target, but I couldn't make that fit
    the effect either, although maybe I'm not configuring it properly?
    Hope somebody can help me.
    Thanks!

    Hi all
    To add to what Colum said, I saw the post last night and
    quickly looked at the page. Here is my own observation after
    picking things apart.
    Firstly, we all need to be aware that while the page is
    presented using Adobe AIR, it's not part of AIR. Think of the AIR
    help viewer as being similar to the browser, but specialized. I
    believe in this case, it's kind of like a hybrid between the CHM
    viewer and a Web Browser. Like the CHM viewer, it's a specialized
    application for displaying content. But like a Web Browser, that
    content simply exists as a collection of pages on a server. For
    example, I can view the same page in my FireFox web browser using
    the link below:
    Click
    here to view
    After picking the page apart, I determined that some
    JavaScript is being used to provide that effect. And it's quite a
    neat one! The JavaScript function seems to be titled
    showHideImage and is found in a linked JavaScript file
    called
    help.js.
    So here's the kicker. I do not believe the page in question
    was created using RoboHelp. If it was, maybe this is a preview of
    coming attractions?
    If not, I would think that at least that function
    should be added to RoboHelp among its many DHTML effects.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • I need help making a program. It deals with BaseTime.

    Hey. Look im having a lot of trouble with a program. It is actually a program i have to make based on another program that i was given. it is called BaseTimeTest. here is the code of that program:
    import java.io.PrintStream;
    public class BaseTimeTest
         public static void main(String[]args)
              PrintStream out = System.out;
              BaseTime t0 = new BaseTime();
              out.println(t0);
              BaseTime t1 = new BaseTime(13,25,46);
              out.println(t1);
              BaseTime t2 = new BaseTime(6,0);
              out.println(t2);
              try
                   BaseTime tbad = new BaseTime(23,59,60);
                   out.println(tbad);
              catch(IllegalArgumentException e)
                   System.err.println(e.getMessage());
              long ctime = System.currentTimeMillis();
              ctime /= 1000;
              ctime %= BaseTime.SECONDS_PER_DAY;
              out.println(ctime);
              BaseTime t3 = new BaseTime((int)ctime);
              outprintln(t3);
              int h=t3.getHours()-5;
              if(h<0)h+=24;
                   out.println(h+":"+t3.getMinutes()+":"+t3.getSeconds());
              out.println(t3.getSecondsSinceMidnight());
              t3.setHours(12);
              t3.setMinutes(0);
              t3.setSeconds(0);
              out.println(t3);
              t2=new BaseTime(13,25,46);
              if(t1.equals(t2))
                   out.println(t1+"=="+t2);
              else
                   out.println(t1+"!="+t2);
              t2.setMinutes(37);
              out.println(t1+"?"+t2+"=>"+t1.compareTo(t2));
              out.println(t1+"diff"+t2+"=>"+t1.diff(t2));
              t1=new BaseTime(3,14,25);
              t2=new BaseTime(5,48,45);
              out.println(t1+"plus"+t2+"=>"+t1.plus(t2));
              out.println(t1+" + "+t2+"=>");
              t1.add(t2);
              out.println(t1);
    What i have to do is create the class which this program uses to run called BaseTime. I know that the java system already has a class named baseTime() but i have to make my own. I need to make get and set methods but i am asking all of you if you can give me some ideas and maybe even code samples. The help would be greatly appreicated. i'll reply to what you say but it maynot be right away as i am very busy.

    I need a setHours method, a setMinutes method, a
    setSeconds method, a getHours method, a getMinutes
    method, a getSeconds method, java.util.Calendar effectively has all these.
    a setSecondsSinceMidnight method, and a getSecondsSinceMidnight method. Not hard to come up with.
    I also need multiple BaseTime methods because i need to have
    overloaded methods because each method has to take in
    different arguments. One takes in no arguments, one
    takes in one argument, one takes in two arguments and
    one takes in three arguments. And what are these methods doing?
    I also need methods that convert milliseconds to seconds, one that
    converts minutes to seconds and one that converts
    hours to seconds. This is all pretty simple. I would extend GregorianCalendar or wrap a GregorianCalendar. Most of what you need is already there, and all you need to do is add the few other methods.
    getSecondsSinceMidnight - make a calendar representing midnight, get the milliseconds value for both, subtract, convert to seconds.
    setSecondsSinceMidnight - I would try setLenient(false), set the calendar to midnight, and then just set the seconds field. Might work.
    Conversion - simple arithmetic.
    Other methods - you didn't mention what they do.

  • Urgent!!  need help to bounce all the tracks individually with same length.

    i have a logic project with 20 (audio/Midi) tracks
    and i want to bounce all the tracks individually...
    one way i find is to solo every track and bounce the master everytime...
    and other way i found was something called export all audio tracks but when i try that all tracks have different length.
    i want all the tracks to be of same length and same size..
    can anybody help me with that asap....
    thanx in advance
    boommmm
    null

    zerodb wrote:
    even i want to know how to render multiple tracks at once using the same start point for all.. please someone.. if you're acquainted with this process in logic, do Help! thanx
    File>Export>Export All tracks as Audio Files
    This will export all tracks from bar 1, beat 1.
    I too, am curious why the OP needs his tracks to be the same length. Using the Export feature insures all tracks start from the very beginning (i.e., the same starting point), which is what you want and need when moving the tracks to another DAW.
    The length of the track is of no consequence in this example. It plays through the song, until that track is over, like a guitar solo that appears in the middle of a song, but doesn't play past that point.
    Unless I'm missing something?

  • Need Help In JTAPI generating a Flash Hook Signal

    Hi all,
    I am currently involved in a project that requires me to transfer a incoming call to another call. However, the lines that they are using is phonenet. Thus if I am to transfer a call in this environment, the application will use up 2 of the channals without freeing them even after the caller and the transfered party have terminated their connection(gotta physically busyout the trunk)
    I am very new in the field of telecommunication and esp to Jtapi. I would need some help from you guys as The only way that I think that could solve my problem is to send a flash hook signal then dial the number(flash hook transfer).
    Can anyone advise me on this?
    Thanks..
    Kenny

    Hey there,
    Have you tried File->Add to Library and then choose the songs off the flash drive? Another way is to head to "Edit" and then choose "Preferences". From there, head over to the "Advanced" tab and make sure there is a check mark next to "Copy files to iTunes Music folder when adding to library." See if that helps.
    B-rock

  • Need help in english to use my iphone4 with orange.fr in france

    I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

    Hello
    The whole story is a little bit confusing for me. So lets see what you wrote:
    >... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
    Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
    > So now I have a computer I can't use
    Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
    > I have also bought the product recovery disks from toshiba's backup media site
    But why if you already have recovery disc that you have used at the beginning of the whole story?
    What you need to do is to use this original disc for OS installation.
    -start your notebook and press F12 several times to enter BOOT menu
    -when the menu is shown put recovery disc into ODD
    -select CD/DVD drive in the menu and press ENTER
    -follow the menu on the screen
    After recovery image installation you will have factory settings again and everything should be OK.
    More questions?

  • I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.

    I recently bought a thunderbolt display and it works great in my Mac environment.  But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer).  Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display.  Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
    Here's my setup:
    MacBook Pro (purchased new in 2011) with i7 processor
    Thunderbolt Display
    Lion OS (all updates installed)
    Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
    With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers.  I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7.  When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds.  But the thunderbolt quickly goes black.  My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker.  Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel).  If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
    To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community.  I'm most appreciative of anyone's help here.

    Moving the discussion to OnLocation
    Thanks,
    Atul Saini

  • Need Help setting up 2 wireless internet computers with 54g wireless router

    I setup the 54g wireless router using the setup disk.  It appears to have worked find and the first laptop has wireless internet.  I am not familiar with setting up a totally wireless network so I am not sure if I did the rest right.  I then setup the 54g wireless internet router on the 2nd computer.  It appears to have loaded but will not connect to the internet.  I looked at the linksys setup etc... for both computers and all is the same including the WPA key, IP address, and the rest.  No differences noted.  I have no idea why the 2nd computer does not have wireless internet access.  It has wired access only.  The 2nd computer shows the wireless network but won't connect to it.  I click on it and hit refresh and nothing happens.  I am at a loss as to what to do now. 
    With 2 wireless computers, must there be a main computer and a secondary computer?  The 1st computer also doesn't have access to windows network setup for some reason.  It tells me to go to the knowledge base at microsoft.com and look up 871122.  No idea why the windows network setup is not working.  It did work before I got a new cable service provider and modem.  However, the windows network setup is working on the 2nd computer. Any help is appreciated.  

    does the 2nd computer even need the router info loaded into it like the 1st computer or should it be enough that the wireless network was created on the 1st computer?  In other words, would having the router info loaded in both computers cause the 2nd one to not connect?  I have spent hours on this and I am very confused now. 
    My router connects fine to the cable modem.  the 1st computer connects fine to the router and gets the wireless internet without a problem.  Again, the 2nd computer shows the network name but won't connect to it.  help please!!

Maybe you are looking for