Need help with Epson printer & Elements 8

When I send a job to my Epson Stylus Photo 1400 Series printer it immediately closes Elements 8. It was previously working, but in the last day or so Microsoft Window shuts down the program. Help!

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Similar Messages

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Need help with duplicate print jobs over network that I can't cancel

I have the Photosmart Premium All-in-One on my home network. My kids who each have laptop running Windows 7 and are connected via wireless to the printer via a DLINK DIR-655.
They hit the print button too many times and it keeps printing over and over again.
Is there a way to get the printer to stop printing these duplicates. I tried turning off/on but they just keep printing.
We're wasting paper/ink and I need help with a solution.
Please let me know. Thanks.
Angelo

There should be a button with a red 'X' on it on the front of the printer. This is the print cancel button.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need Help With Adobe Photoshop Elements 2.0

I have and use Adobe Acrobat and three versions of Adobe Photoshop Elements (2, 5 and 7). I use version 2 frequently as I'm more familiar with it and it's simpler to use for what I need to do. All was fine until recently when my computer was installed with Windows 8. Now I can't save photo edits from Version 2.0...... it aborts each time I try. Why is that? It is costing me a lot of wasted time. The other versions that i have don't do that. Need help. Thanks. Stu Snyder.

The first thing i would try is deleting the Photoshop Elements 2.0 Prefs folder as explained in the post #2 linked to below:
http://forums.adobe.com/thread/1254224?tstart=30
Does it happen when trying to save as any file format or just a certain one like jpeg?
Have you tried saving a photo to a different place like your desktop?

Need help with Automating Printer and LPR installation

I work for someone who has a need for automating the print installation of LPR print port to mac laptops. Obviously this will need to cover anything OS X 10.3 and above. All of this needs to be done command line via a batch file of sorts.
I am a windows and Linux guy, however I just bought a Mac and starting to like the new Leopard OS and the capabilities of boot camp.
What I need:
1) how to install LPR port to the laptop
2) installing a printer from a some sort of cab file with correct port and drivers. (in windows we use print migrator, however the cab files we use for windows will obviously not work with different port types and drivers)
3) finally some clean up type script that will clean up any temp files I had to create or such.
I kind of need this soon so if anyone knows how or could point me in the right direction. It would be greatly appreciated.

If you force restart the computer on the freeze up, or force quit the printer adding window, does the printer appear in the print and scan system preference? In other words, did the printer successfully install? (is it possible that the setup part of the install failed, but the actual install worked?)
If so, you might be able to set the configurations yourself.
Open up the print and scan system preference. Double click on the printer.
When the printer queue window opens up, you should be able to click on the printer setup button.
Go through all the tabs and set things up the way you like.
HTH
-Graham

Need help with hp printer/airport

until yesterday, my ibook printed to my hp 5250 on the airport network. i came back from a trip, and although the internet connection works fine, i can no longer print. i can see the printer (listed as a bonjour printer), but all jobs are stopped. tried the usual - shut everything down and restarted;disconnected and reconnected printer and airport; deleted printer from "print and fax" in system preferences and then added it back in. nothing. i have things in such a twist that i can't print from the printer even when connected directly (the printer DOES work when connected directly to another mac). i can also see another hp printer connected to the network, but cannot add it as a printer - it just spins forever. please help - could i have updated something from apple that is in conflict with my printer working? it is the only thing i can think of. thanks in advance!

I have the same problem.

Need Help With HP Printer

Currently I have a HP 2610 AIO printer. It works great, for the most part. I have noticed though that the footers in the MS Word 2004 default margins, as well as margins in Pages and Adobe Reader 7 all get cut off at the bottom. Even though if I transfer the document over to my PC with Word 2003 and Adobe Reader 7 the document prints fine.
I tried contacting HP today, but I probably won't see a response till Monday so I am asking people here. Is there a way to fix this issue with HP printers? Is there a third party driver, or default Apple drive that could be used to overwrite the default and hopefully this fix this bug?
BTW so far I have tried the following:
-uninstalling Office and reinstalling
-uninstalling HP software + drivers & reinstalling
Is there a preference file or some other file that would reset to a default if I remove it?
I am looking for any and all answers I can find at this point because so far from searching the Pages forum here, as well as the Google Newsgroup for MS Word 2004, there doesn't seem to be any way to solve this problem.

I figured out that I needed to select Borderless printing. Otherwise Mac OS X doesn't properly recognize the proper bottom margin of my printer.

Need help with HP printer installation.

Trying to install drivers for an HP OfficeJet 6500 e710n on two machines, an iMac and a MacBook Air, both running OS X 10.7. The printer is a networked printer that I have tried adding to both machines as an IP printer and as a USB printer. With either method the printer is automatically discovered and the drivers are downloaded. After the drivers are installed the process stalls at "Configuring the device..." I have waited at this point for over half an hour with no progress before choosing cancel. I have also downloaded and run the installer from HP with the same results. The only way that I have been able to connect with this printer is by manually configuring an IP printer with the generic PCL drivers. This allows me to print but only in low-res black and white. Any suggestions?

If you force restart the computer on the freeze up, or force quit the printer adding window, does the printer appear in the print and scan system preference? In other words, did the printer successfully install? (is it possible that the setup part of the install failed, but the actual install worked?)
If so, you might be able to set the configurations yourself.
Open up the print and scan system preference. Double click on the printer.
When the printer queue window opens up, you should be able to click on the printer setup button.
Go through all the tabs and set things up the way you like.
HTH
-Graham

I need help with greenscreen for Elements 12

I purchased Adobe Elements 12 at best buy after a discussion with the associate that i needed a program to work with my greenscreen. He said adobe elements 12 was the perfect match and how easy it was to work with a greenscreen. Unless i'm stupid he lied. I spent 4 hours last night fighting with the program and searching the net for help. so far as far as i can tell i was lied to and i have to spend more money to make this work. am i missing something that is really easy and in my face or does elements 12 suck for greenscree?

Just Google:
"green screen photoshop elements"
and you'll find many tutorials about this.
Another similar post:
http://forums.adobe.com/message/6200948

Need help with media-print style sheets

I am trying to create a style sheet for printing only for pages on my site. I have found a lot of the same information describing how to remove unwanted items, and change colors and so forth for the items to be printed. My problem is that after the unwanted parts of the page are removed, the remaining test to be printed does not "flow" into the areas previously occupied by other elements. The printed text remains in the location on the page that it occupies on the webpage. How do I get the text to "take over" the whole page?
Below is the style definition for the text content as it is displayed on the screen:
div.mainBody {
     position:absolute;
     left:210px;
     top:145px;
     width:640px;
     height:595px;
     background-color:#000000;
     font : normal normal normal/normal Book Antiqua MS Sans Serif Times New Roman;
     text-align: justify;
     color:#CCCCCC;
And here is the "new" definition for the text as it should be printed:
.mainBody {
     position: absolute !important;
     left: 0px;
     top: 0px;
     width: 100%;
     margin: 0;
     padding: 0;
     background: white;
     font: normal normal normal/normal Book Antiqua MS Sans Serif Times New Roman;
     text-align: justify;
     color: #000;
     float: none;
     display: inline;
All other elements on the page are "turned off" with "{ display: none; }"
Why am I having so much trouble with such a simple thing?
Thanks for any help!
Mark

Hello Mark,
why do you think a feedback forum for Oracle forums is the right place to ask this question?
Regards
Marcus

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Need help with scanner/printer

I'm having trouble with my scanner. I only started having problems yesterday. When I came to this website it told me to use HP print scan dr. But I ran it, and it told me to go back to HP customer care. I've tried uninstalling it and reinstalling it. Nothing works. I don't know what I did to it.

Hey @bluepen ,
Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
I understand you are having trouble with your scanner.
So that I can better assist you I need to know a few things first;
1. What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
2. What printer are you using?
3. How is the printer connected to the computer?
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Look forward to hearing back from you.
I worked for HP.

Need help with automatic printing of a page

I am looking for inputs for a particular scenario; On the Oracle HR Self-service pages, once the employee adds/updates his personal details and submits his changes to be approved by the HR manager, the final confirmation page should be automatically routed to a particular printer and be printed. Can this functionality be achieved with OAF coding for the Submit button?

Hi,
Check this link, it will help you.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaboration">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaboration</a>
Dont forget to close the thread when answered.
Regards,
Amit

Need help with 5515 Printer

HP Photosmart 5515 Printer not used for the last 7 months. Replaced all 4 ink cartridges, printer will not print. Ran all the suggestions in the help section. Nothing works. Test sheet printed all colors, not black. Tried to copy something, blank page. HELP

Hello @TH-39,
Were you able to try the troubleshooting steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Need help with either printing or automating word

I am attempting to write a simple application to print out formatted business checks to a printer. in vb.net in 2013 Visual Studio. Problem is I need to be able to change font type in the middle of the page, and it appears that font type is applied to
the whole document that is printed, is there a work around. Last line of a check needs to be in MIC font while the rest of the check is in a standard font. I have the MIc font but no way to make a change for only the last line of the check. there are
3 checks per sheet of paper so need to change fonts multiple times.

Hi MstrWayne,
>>I am attempting to write a simple application to print out formatted business checks to a printer. in vb.net in 2013 Visual Studio. Problem is I need to be able to change font type in the middle of the page.
Based on your description, I'm afraid that it is not the correct forum for this issue, since this forum is to discuss the VS IDE. Your real issue would be related the language development.
To help you find the correct forum, would you mind letting us know more information about it?
Which kind of project did you want to create, WinForm or web or others? Please let me know more information about it, I will help you find a
more appropriate forum, you know that the VB language, WinForm or ASP.net or others all have own support forums.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need help with Epson printer & Elements 8

Similar Messages

Maybe you are looking for