Need help with intricate lettering
Well, I try not to ask questions on this forum without attempting things myself. I understand other people's time very important. Anyway, I took a course at a technical college and have a home classroom course that I'm doing right now. Unfortunately, at this point I need help. This logo must be recreated to vector art because it will be printed on a very large substrate. The customer has no access to the vector art.
I need help.....I am very proficient with the basic tools, the pen tool especially. However, creating intricate lettering like this, I don't have much experience with.
The lettering is kicking my *** right now. Also, I can mimic the gradient for the bars decently, but am having trouble with the little rounded gradient effect in the corners.
I hate to beg for help, but may I have help!!?? I'm not looking for someone to do the work, rather please provide any tips so I can wade my way through this. The customer contacted my boss today and needs it by Monday for a meeting, so I will have a project to do over the weekend.
It needs to print spot black. Any tips/suggestions will be greatly appreciated. After work tonight, I'm going to go through my classroom in a book to pick up helpful tips.
Thanks everyone,
Andrew
There are many stylistic variations of this kind of thing. Your screenshot is too low-res to discern the exact treatment used for sure. That said:
This takes about 5 minutes and results in a clean, economical construct with a minimum of paths.
Only color is Spot Black.
Two Swatches: Spot Black and 20% tint of Spot Black.
All the offset paths (the inner paths of all the characters) are a single Compound Path and receive a three-stop linear grad fill at 0 degrees.
All the original paths (the outer paths of all the characters) are left separate and a three-stop linear grad fill at 120 degrees is applied (so each outer character has its own grad that can be individually adjusted).
A little individual adjustment of the grads on each outer character can very closely match the arrangement of bevel tones of the original you're trying to emulate. Keep it simple. Study the shading of the emboss edges carefully, and try to see them as linear grads spanning the whole character, not as a bunch of tiny tedious individual details wrapping around the character. Then accomplish the shading with as few grad stops as possible. Understand how to "tighten" or "sharpen" the shifts between grad stops by moving the gamma pointers that are between each pair of adjacent grad stop off-center toward one stop or the other. The tighter the transitions--especially on the bevel facets--the more "sparkle."
JET
Similar Messages
-
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
Need help with connecting file inputs to arrays
In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*; //Imports the Java library
class progB //Defines class
public static void main (String[] arguments) throws IOException
BufferedReader keyboard; //<-
InputStreamReader reader; // Allows the program to
reader = new InputStreamReader (System.in); // read the the keyboard
keyboard = new BufferedReader (reader); //<-
String name; //Assigns the name variable which will be parsed into...
int newnames; //...the integer variable for the amount of names.
int order = 0; //The integer variable that will be used to set the array size
String[] array; //Dynamic array (empty)
System.out.println (" How many names do you want to input?"); //This will get the number that will later define the array
name = keyboard.readLine ();
newnames = Integer.parseInt (name); // Converts the String into the Integer variable
array = new String [newnames]; //This defines the size of the array
DataInput Imp = new DataInputStream (System.in); //Allows data to be input into the array
String temp;
int length; //Defines the length of the array for a loop later on
for (order = 0 ; order < newnames ; order++) //<-
{ // Takes the inputed names and
System.out.println (" Please input name "); // gives them a number according to
temp = keyboard.readLine (); // the order they were inputed in
array [order] = temp; //<-
for (order = newnames - 1 ; order >= 0 ; order--) //<-
{ // Outputs the names in the reverse
System.out.print (" \n "); // order that they were inputed
System.out.println (" Name " + order + " is " + array [order]); //<-
for (order = 0 ; order < newnames ; order++) //<-
if (array [order].startsWith ("M") || array [order].startsWith ("m")) // Finds and outputs any and all
{ // names that begin with M or m
System.out.print (" \n "); //
System.out.println (array [order] + (" starts with M or m")); //
} //<-
for (order = 0 ; order < newnames ; order++) //<-
length = array [order].length (); //
if (length >= 5) // Finds and outputs names
{ // with 5 or more letters
System.out.print (" \n "); //
System.out.println ("Name " + array [order] + " have 5 or more letters "); //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with? -
Help with intricate search and results display
Hi All,
I am looking for help with a problem I have, my knowledge on Numbers is limited, I have learnt a lot by trial and error but I do not know where to start on this problem.
What I am trying to do is display result from sheet 1 onto sheet 2 when I enter the letters of the REFERENCE into cell C3. Below is an example of the result I am tring to achieve -
SHEET 2
Reference
AB
Reference
SZone
Parts
LZone
Parts
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB12
3
75
2
100
AB12
3
75
2
100
AB13
3
75
3
75
AB13
3
75
3
75
AB14
3
75
3
75
AB14
3
75
3
75
AB15
3
75
1
200
AB15
3
75
1
200
AB16
3
75
3
75
AB16
3
75
3
75
AB21
3
75
3
75
AB21
3
75
3
75
AB22
3
75
3
75
I have searched for AB by entering it in cell B3 on Sheet 2, an auotmatic search has been carried out on Sheet 1 and all the columns have been brought into sheet 2 with the corresponding data and placed under the COLUMN HEADERS. I have over 4000 lines on Sheet 1, although the most result that will ever be pulled through will be 150.
When the data is pulled in I will need to do other calculation in the COLUMNS F, G and H so the data need to only be mapped to COLUMNS A to E.
Also I want to be able to use this spreadsheet on my iPad.
Has anybody got an idea/solution that will help.
Thanks in advance.
IanIan,
We've had a recent report of troubles with large tables in the iOS version of Numbers, so you may want to consider ways to accomplish your goals without the full 4000-row set of data.
I re-read the problem statement in your original post and see that I should have known that you were needing a solution for both platforms. But, I'm still not clear on what part you have figured out and what part you still need help with. We often refer to your second table as a "Breakout Table". There are different ways to program it. My favorite is to add a column to the main table that identifies rows that meet the transfer criteria and assigns them a serial number to help determine where they should go in the second table.
Here's an example:
In the new column on the right edge of the table T1, the expression is:
=IF(ISERROR(FIND(T2 :: $A$1, A)), "", COUNT($F$1:F1))
Note that the first cell in the Aux column is seeded with a zero.
The expression in the body cells of the second table, T2, is:
=INDEX(T1, MATCH(ROW()-1, T1 :: $F, 0), COLUMN())
Note that the search term is to be entered into Cell A1 of table T2.
Does this give you a start?
Jerry -
Need help with writing a query with dynamic FROM clause
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN my_table_name_col NEW_VALUE my_table_name
SELECT table_name AS my_table_name_col
FROM all_tables
WHERE owner = 'SCOTT'
AND table_name LIKE 'E%';
-- Main Query:
SELECT COUNT (*) AS cnt
FROM scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM -
hello guys :)
I need help with this exercise:
Find the most common cooking method in recipes that contain tomatoes.
the 4 tables:
t_recipes
--recipe_no
--recipe_name
t_products
--product_no
-product_name [tomatoes,cucumbers, onions]
t_integration
--product_no
--recipe_no
t_cooking_mode
recipe_no
mode [Frying,baking]
I am realy lost :S
thank youHi,
851072 wrote:
Thank you for your comment :)
But... I didn`t understand the first partSorry, what part is that? You probably understood "Welcome to the forum!" It looks like you understood most of what I said, perhaps before I said it. You seem to be on the right track.
Unlike talking to a co-worker in the next cube, exchanging messages with someone on this forum takes a fair amount of time, so it's worth the time it takes to explain things very clearly, more than you would in conversation. Post all the relevant information, and say exactly what the problem is.
amm i tried to do this:
select t_recipes.recipe_name, count(t_cooking_mode.cooking_mode)
from (t_cooking_mode INNER JOIN t_integration ON t_cooking_mode.recipe_no = t_integration.recipe_no )
INNER JOIN t_products ON t_integration.product_no = t_products.product_no)
WHERE t_products.product_name = 'tomatoes'
GROUP BY t_recipes.recipe_name
help?Please help by posting whatever you know about the problem. For example, if there's a error message, post the complete error message, including the line number.
Help the people who want to help you by formatting your code and making it easy to read and understand. This will help you, too.
For example, here's exactly what you posted, with only the white-space changed to make parallel items, such as parentheses, line up nicely:
select t_recipes.recipe_name
, count(t_cooking_mode.cooking_mode)
from ( t_cooking_mode
INNER JOIN t_integration ON t_cooking_mode.recipe_no = t_integration.recipe_no
INNER JOIN t_products ON t_integration.product_no = t_products.product_no
WHERE t_products.product_name = 'tomatoes'
GROUP BY t_recipes.recipe_nameWhen you format your code like this, it can be very easy to spot errors like unbalanced parentheses. In this case, the ')' right before the WHERE clause has no matching '('. You don't need to use any parentheses at all in the FROM clause. You can simply say:
FROM t_cooking_mode
JOIN t_integration ON t_cooking_mode.recipe_no = t_integration.recipe_no
JOIN t_products ON t_integration.product_no = t_products.product_no
WHERE ...INNER JOIN is the default kind of join, which makes sense, since the majority of all joins are inner joins. I usually say JOIN (instead of INNER JOIN) because it makes the code more compact and easier to read (at least for me), but I won't be maintaining your code, so do what's best for you.
What are you trying to find in this problem? Is it a recipe name or a cooking mode? If it's a cooking mode, the why do you have t_recipes.reciple_name in the SELECT (and GROUP BY) clause? Shouldn't you be using some other column, from some other table?
If I understand the problem correctly, the t_recipes table is not needed in this problem. You won't necessarily use every table in every query.
When you post formatted text on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing. -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
Need help with JTextArea and Scrolling
import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020What's the problem you're having ???
PS. -
Need help with trim and null function
Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
ThanksHi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
, NVL ( AL1.user_data_text, 'XX' )
FROM Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
, 'XX'
FROM Table -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Need help with Airport Express and so on.
Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection. -
I need help with shooting in my flash game for University
Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
//declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
minesInGame = 15;
//create a timer fires every second
mineMaker = new Timer(6000, minesInGame);
//tell timer to listen for Timer event
mineMaker.addEventListener(TimerEvent.TIMER, createMine);
//start the timer
mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
evt.target.x -= Math.random()*5;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseMine();
//declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
atmInGame = 15;
//create a timer fires every second
atmMaker = new Timer(8000, minesInGame);
//tell timer to listen for Timer event
atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
//start the timer
atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
evt.target.x -= Math.random()*10;
if (evt.target.x >= stage.stageWidth)
evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
bg_mc.x -=10;
function moveBackward():void{
bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
//makes the tank move by 10 pixels right
if (evt.keyCode==Keyboard.D)
tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
//making it so the user can't shoot for a bit
shootAllow = false;
//declaring a variable to be a new Bullet
var newBullet:Bullet = new Bullet();
//changing the bullet's coordinates
newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
newBullet.x = tank_mc.x;
//then we add the bullet to stage
addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
//tank_mc.gotoAndPlay("hit");
currentHP -= 10;
// remove anti tank mine
removeChild(tankMine_mc);
//var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
//Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
cTime ++;
} else {
//if it has, then allow the user to shoot
shootAllow = true;
//and reset cTime
cTime = 0;
function updateHealthBar():void
percentHP = currentHP / maxHP;
healthBar.barColor.scaleX = percentHP;
if(currentHP <= 0)
currentHP = 0;
trace("Game Over");
updateHealthBar();USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key
-
Need help with conditional query
guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
"FGL_GRNT_CODE" VARCHAR2(60),
"FGL_FUND_CODE" VARCHAR2(60),
"FGL_ACCT_CODE" VARCHAR2(60),
"FGL_ORGN_CODE" VARCHAR2(60),
"FGL_PROG_CODE" VARCHAR2(60),
"FGL_GRNT_YEAR" VARCHAR2(60),
"FGL_PERIOD" VARCHAR2(60),
"FGL_BUDGET" VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH got_greatest_year AS
SELECT fgl.* -- or whatever columns are needed
, MAX ( CASE
WHEN fgl_period = :given_period
THEN fgl_grnt_year
END
) OVER () AS greatest_year
FROM fgl
SELECT SUM (fgl_budget) AS total_budget -- or SELECT *
FROM got_greatest_year
WHERE ( fgl_grnt_year = greatest_year
AND fgl_period = :given_period
OR ( fgl_grnt_year = greatest_year - 1
AND fgl_period = 14
;MiguelHi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH got_greatest_year AS
SELECT TO_NUMBER (fgl_grnt_year) AS grnt_year
, fgl_period
, TO_NUMBER (fgl_budget) AS budget
, MAX ( CASE
WHEN fgl_period = :given_period
THEN TO_NUMBER (fgl_grnt_year)
END
) OVER () AS greatest_year
FROM fgl
, got_cnt_00 AS
SELECT grnt_year
, fgl_period
, budget
, greatest_year
, COUNT ( CASE
WHEN grnt_year = greatest_year
AND fgl_period = '00'
THEN 1
END
) OVER () AS cnt_00
FROM got_greatest_year
SELECT SUM ( CASE
WHEN grnt_year = greatest_year -- New
AND fgl_period = :given_period -- New
AND cnt_00 > 0 THEN budget * 2 -- New
WHEN grnt_year = greatest_year
AND fgl_period = :given_period THEN budget
WHEN grnt_year = greatest_year
AND fgl_period = '00' THEN -budget
WHEN grnt_year = greatest_year - 1
AND fgl_period = '14'
AND cnt_00 = 0 THEN budget
END
) AS total_budget
FROM got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New". -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
Need help with Template - unbalanced #EndEditable tag
I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
<p><a href="../Library/contact/index.html">Contact Us</a></p>
<!-- #EndLibraryItem --></div>
<div id="navigation">
<div id="navigation_l">
<div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
<li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
<li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
</ul>
<!-- #EndLibraryItem --></div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
CherylOkay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/internal_about.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>CAITE - Commonwealth Alliance for Information Technology Education</title>
<!-- InstanceEndEditable -->
<!-- InstanceBeginEditable name="head" -->
<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />
<!-- TemplateBeginEditable name="head" --><!-- TemplateEndEditable --><!-- InstanceEndEditable -->
<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
<!--
$(document).ready(function() {
$("img[@src$=png], div#wrapper_l, div#wrapper_r, div#whatsnew").pngfix();
//-->
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
<div id="wrapper">
<div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
<p><a href="../Library/contact/index.html">Contact Us</a></p>
<!-- #EndLibraryItem --></div>
<div id="navigation">
<div id="navigation_l">
<div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
<li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
<li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
</ul>
<!-- #EndLibraryItem --></div>
<!-- end navigation right -->
</div><!-- end navigation left -->
</div><!-- end navigation -->
<div id="wrapper_l">
<div id="wrapper_r">
<div id="innerwrapper">
<div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
<div id="internalBanner"><!-- InstanceBeginEditable name="internalBanner" -->
<div class="students-banner">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
<td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
<div id="internalQuote-inner">
<p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
</div>
</div></td>
</tr>
</table>
</div>
<!-- InstanceEndEditable --></div> <!-- end banner -->
<div id="internalContent">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="317" align="left" valign="top" id="secondary-content">
<!-- InstanceBeginEditable name="SecondaryNav" --><!-- #BeginLibraryItem "/Library/studentNav.lbi" -->
<h3><a href="../students/index.html">For Students</a></h3>
<div id="secondaryNav">
<ul>
<li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
</ul>
</div><!-- #EndLibraryItem --><!-- InstanceEndEditable -->
</td>
<td align="left" valign="top" id="contentCell"><!-- InstanceBeginEditable name="mainContent" -->
<h1>For Students</h1>
<p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
<p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
<p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
<p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
<p> </p>
<!-- InstanceEndEditable --></td>
</tr>
</table>
</div>
<div id="alliances">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
</tr>
<tr>
<td align="center" valign="middle"><!-- #BeginLibraryItem "/Library/AllianceTable.lbi" --><p>
<table border="0" cellpadding="2" cellspacing="0">
<tr>
<td width="35" align="center" valign="middle"> </td>
<td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
<td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
<td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
<td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
<td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p> </td>
<td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
</table>
<!-- #EndLibraryItem --></td>
</tr>
</table>
</div>
</div> <!-- end inner wrapper -->
</div><!-- end wrapper right -->
</div><!-- end wrapper left -->
<div id="bottom">
<div id="bottom_l">
<div id="bottom_r"> </div><!-- end bottom right -->
</div><!-- end bottom left -->
</div> <!-- end bottom -->
</div><!-- end wrapper -->
<div id="copyright"><!-- #BeginLibraryItem "/Library/copyright.lbi" -->
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
<!-- #EndLibraryItem --></div>
<!-- end copyright -->
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
</body>
<!-- InstanceEnd --></html>
Maybe you are looking for
-
Can anybody tell me the problem with this code when compiled in jdk1.4
Can anybody help me find out the error in this code. Try to drag a file from your desktop and drop it on the first textpane on my GUI. Then try to drag another file. This time the dragdrop event handler throws a null pointer exception. This happened
-
9300 with no audio - connected to phantom headset
I have a 9300 with no in call audio in either direction, although incoming calls do ring. The display shows the headset active symbol, but there is no attached headset and Bluetooth is disabled. Any ideas how to resolve? Phone is currently useless. A
-
Episodes/Song in Reverse Order
I upgraded my iPod Touch software to 2.2, and all of the chapters in my audiobook podcasts are now in reverse order. (They are downloaded from Librivox.) All of the chapters are in correct order on iTunes and when my iPod is hooked up to iTunes, the
-
Can i use Logic Pro with Macbook?
My Macbook is 2GHz Intel Core Duo with 1 GB 667 MHz DDR2 SDRAM... Can i use the Logic Pro 8?
-
Cannot find the classfile for javax.mail.internet.AddressException
Hi, Scenario is SAPCRM 7.0/ECC. We are trying to extend the EmailAction class. The error bieng faced is Cannot find the classfile for javax.mail.internet.AddressException. We have added crm/isa/lwc to the used Dcs but still this error is there. Mail.