Need help with x-fi / adobe audition monitoring / input issue

Hi all - I've been desperately trying to fix this issue for a long time now. This is the first computer problem that has really got me stumped since, well, since forever. I've searched all over and seen a few tidbits about this issue but I couldn't find anything that could help me actually solve my problem.
The issue is that when I record in audition through the x-fi, as I record a second separate track, whatever I'm monitoring from any other tracks gets recorded onto the second track along with the new recording.
I've found threads saying it's an issue with the mixer, however I'm trying to figure out the audio creation mode in the console launcher and I am absolutely unable to figure out how to be able to monitor track 1 while not having it get recorded to track two. I went through basically each strip and muted/unmuted to see what would happen and nothing ever worked. I also know that it indeed is recording the monitor, as overlaid (not printed) effects are copied to the new track.
I'm using vista, with the following drivers for the x-fi and asio4all.
driver:
5.12.6.1201
11/2/2006
asio4all v 2.7
Sound Blaster® X-Fi™ XtremeMusic (D) Sound Card
What do I do?
THANKS

This may not help, because I've not used ASIO personally, and I'm not as sure of the SBX-Fi's internals, but CL has tended to design cards which have recording taps at each input and at the output of the card. Thus the hardware has supported (dry) recording of individual sources, unmixed, or the mixed output of the card. The Surround Mixer only provides for recording one source, and gives a menu of each source, plus a "What You Hear" source which is actually the (wet) mixed output. You probably only need to figure out how to set things to record a specific source while auditioning the mixed output, and there's probably a way to do that.
-Dave
[email protected]

Similar Messages

Need help with upgrade from Adobe Creative Suite to PS CS4

My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
I'm trying to reload my PS CS4. I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
When installing the upgrade, it tell me to select the product I already own. I own the educational full creative suite, but am only upgrading the Photoshop. I chose Photoshop CS and tried entering the serial number for the suite. It tells me that the serial number doesn't match the product chosen. Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
Thanks

i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect. i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers. to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago.
that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

I need help with installation of adobe, photoshop, elementss 12

i'm trying to install this program on Toshiba running window 7. it starts the install and when it's almost complete it backs out. The trouble shoot directs me to a program file that isn't in my computer? And adobe support sucks

Error msg
Once the install gets to "production information"
Error 1935 (AE56AAF5-F30CO-3D4B8859 A1E50A3E27BF)
HRESULT: 0x80073712
After clicking on Okay a "Rolling back action" msg appears.

I need help with installation of Adobe Premiere Elements 11?

Apparently what I have been using was a trial period. I got a message that my trial has expired. When I entered the serial number on my software, I get message that the number is invalid. Pictures I have already downloaded, I am now unable to view. On my computer (PC Windows 8), Adobe Photoshop Elements 11 and Adobe Premiere Elements 11 are listed as programs installed. Do I uninstall them and reinstall the software? If I do, will I lose the pictures I have already downloaded? How do I delete Adobe Premiere Elements as being preferred to view my pictures in?

Error msg
Once the install gets to "production information"
Error 1935 (AE56AAF5-F30CO-3D4B8859 A1E50A3E27BF)
HRESULT: 0x80073712
After clicking on Okay a "Rolling back action" msg appears.

Need help with the following code (Want an input popup with numeric pad)

Hello,
I put the following code in an event :
import javax.swing.JOptionPane;
value = javax.swing.JOptionPane.showInputDialog("Price", "");
try {
Double newPrice = new Double(value);
line.setPriceTax(newPrice);
} catch (NumberFormatException e) {
JOptionPane.showMessageDialog(null, "Not valid number: " + value, "Error", JOptionPane.PLAIN_MESSAGE);
But this only gives an input popup screen and then i have to use a keyboard instead of my touchscreen to give the input,
i would rather like it to be a popup input screen with a numeric pad attached.
Is this possible, and how??
Thanks in advance.
Jeroen

hii,
set321go wrote
make your own. Create a custom OptionPane and add --->
// global def.
private final JLabel amountLabel = new JLabel(" Input Trades Amount : ");
private JFormattedTextField amountTextField;
private double amount = 0.00;
private NumberFormat amountFormat;
// in panel class add --->
amountFormat = NumberFormat.getNumberInstance();
amountFormat.setMinimumFractionDigits(2);
amountFormat.setMaximumFractionDigits(2);
amountFormat.setRoundingMode(RoundingMode.HALF_EVEN);
amountLabel.setFont(new Font("Serif", Font.BOLD, 16));
amountLabel.setForeground(KopikSalesTest.textColor);
amounTextField = new JFormattedTextField(amountFormat);
amountTextField.setValue(0.00);
amountTextField.setFont(new Font("Serif", Font.BOLD, 20));
amountTextField.setForeground(Color.someColor);
amountTextField.setBackground(Color.someColor);
amountTextField.addFocusListener(new FocusListener() {
            public void focusGained(FocusEvent e) {
                amountTextField.requestFocus();
                amountTextField.setText(amountTextField.getText());
                amountTextField.selectAll();
            public void focusLost(FocusEvent e) {
                //on exit
somePanel.add(amountLabel);
somePanel.add(amountTextField); ... kopik

Need help with re-prompting the user for input .

I am trying to wright a code the re prompts the user for input if they enter anything but an integer but I keep getting a "char cannot be dereferenced" error when I try to compile.
Here's what I have got:
import java.util.Scanner; // imports Scanner methods
public class SandBox
public static void main(String[] args)
      // re-prompting test
      Scanner in = new Scanner(System.in);
      System.out.println("Please enter an integer: ");
      String i = in.nextLine();
      for(int a=0; a<i.length(); a++)
          if( (i.charAt(a).isDigit()) ) {
              System.out.println("Thank you!");
              break;
            } else {
                System.out.println("Please try again");
                continue;
      int b = Interger.parseInt(i);
}// end of class
}//end of main method

Sorry for double posting but it won't let edit my last post.
I would prefer to go through it without using try catch because it takes longer though I will use it if I cannot get the other way working. I currently have two versions of the code both using try catch and the other way but both say that they "cannot find symbol" when I try to parse. here are both versions of the code:
import java.util.Scanner; // imports Scanner methods
public class SandBox
public static void main(String[] args)
      // try catch test
      boolean inputIsFaulty = true;
      int inputInt = 0;
      Scanner in = new Scanner(System.in);
      do {
         System.out.println("Please enter an integer: ");
         String i = in.nextLine();
         for(int a=0; a<i.length(); a++)
            if (Character.isDigit(i.charAt(a))) {
              System.out.println("Thank you!");
              inputIsFaulty = false;
            } else {
                System.out.println("Please try again");
        while (inputIsFaulty);
      inputInt = Integer.parseInt(i);
}//end of class
}//end of main method
import java.util.Scanner; // imports Scanner methods
public class SandBox2
public static void main(String[] args)
      // try catch test
      boolean inputNotOK = true;
      int inputInt = 0;
      Scanner in = new Scanner(System.in);
      do {
         System.out.print("Please enter an integer: ");
         String inputStr = in.nextLine();
         try {
            inputInt = Integer.parseInt(inputStr);
            // this line is only reached if the parse works
            inputNotOK = false;
         catch (NumberFormatException e) {
            System.out.println("You didn't enter a proper number. Please Try again.");
      while (inputNotOK);
      inputInt = Integer.parseInt(imputStr);
}//end of class
}//end of main method

Need help with 3.0 update...weird issue!

I've already purchased the update and when I go to download from iTunes it says it is downloading but the download meter on the left of iTunes comes up for not even a second and then it stops. Should I try and reset my wireless network or any other suggestions?

figured it out...thanks

Need help with reviewing in acrobat professional 8.0

Hi,
I need help with reviewing in adobe acrobat professional 8.0 for windows.
When I click in Edit->Preferences->Reviewing I choose Network folder and in browse button I select the network folder.
It´s ok, but when I restart the computer, the configuration of reviewing dissapear.
Any sugestion for solve this problem?

The closest I came was:
// Custom calculation script
(function () {
    // Get the field values, as strings
    var s1 = getField("Charged").valueAsString;
    var s2 = getField("Reduction").valueAsString;
    // Perform the calculation if both fields are not blank
    // and Charged is not zero
    if (s1 && s2 && +s1 !== 0) {
        event.value = 100 * (+s1 - +s2) / +s1;
    } else {
        event.value = "";
which I got from another thread. It works, but the result tends to have a - before the number. Also when I use the formatting in acrobat and select percentage the decimal placement gets confusing. I'm creating this form for a bunch of morons in my HR department so extraneous numbers makes them confused. I need the most simplified result possible.

Need help with accessing the program.

I need help with accessing my adobe creative cloud on my windows 8.1 laptop. I have an account but do not have an app. I need this for my online classes. Please help!

Link for Download & Install & Setup & Activation may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

Need help with a Asus 27" monitor with webcam problem.

Need help with a Asus 27" monitor I bought. Model VK278Q. The issue is that the webcam will not work properly. Various applications can see the webcam, but I just get a black box. From what I have read, the issue seems to be that there are no official drivers for the webcam.
I thought someone in this community might be able to offer some help before I return the monitor. I read somewhere that it may be possible to tweat the OS so that the iSight software will work for the monitor webcam.
Thx

NAVARRO360 wrote: ... there is no simple fix? ...
Eureka! You now understand the situation.
Even the old standard for Mac OS X drivers for non-compatible cams, macam, says that it has no driver for ASUS (20") monitor camera.
The macam status shows:
not working (no documentation)
With no working driver for the 20" ASUS, it is not surprising that there is none for the 27" either. There may be good reason that ASUS won't (or can't) offer either the technical documentation or a Mac driver for their monitor's inbuilt webcam. However, they apparently do not publish that information.
If ASUS Technical Support cannot provide the driver you need for OS X, the ASUS will continue to be a ridonculous (sic) monitor whose webcam will not work with your OS X Mac. The only other simple fix I can think of is to use the ASUS with a different PC that is compatible with this monitor and its inbuilt webcam. What you do is certainly your choice.
Message was edited by: EZ Jim
Mac OSX 10.7.3

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

Need help with x-fi / adobe audition monitoring / input issue

Similar Messages

Maybe you are looking for