Need of creating receiver determination and interface determination

what is the need of creating interface determination where as providing all the details in Receiver determination?

Hi,
The loose coupling between the Interface mapping and receiver determination have provided the compatibility for reusability.
The Interface determination maintained and just linked to receiver determination so you could have multiple receiver determinations with common interface determination or vice-versa.
If you provide all the information in receiver determination then, it would be very dfficult to have the various mappins for multiple receivers maintained in receiver determination.
Interface determination is applied at runtime to all messages to be processed. Thus from security point of view of transaction of data. its preferable.
Thanks
Swarup

Similar Messages

Receiver Determination and Interface Determination

Hi,
Please, can anyone explain what is the concept of 'Receiver determination' and 'Interface Determination'?
Thanks,
Harikumar. S

Hi,
>>>>Receiver determination
its about finding the receiver system for particular source system and outbound interface.
Suppose,you want to send data from file->XI->SAP and CRM based on some condition
in this scenario you need to determine whether to send file data to SAP or CRM system,this decision you will do in Receiver determination
in Receiver determination screen you need to provide the following details
1.Source system(ex: File system)
2.Outbound Interface(File Message Interface)
3.condition and receiving system(ex:if some x field value in source payload is 1 go to SAP elseif '0' go to CRM system)
>>>>>>Interface Determination
suppose in above scenario you determined the receiver i.e SAP,you will have number of IDOCs (Inbound Interfaces)in SAP.
so to which IDOC you will send file data?This decision you will make in Interface determination(we can it as Inbound Interface determination).if you find the IDOC is CREMAS then how will transfer file structure data to IDOC structure? answer is Message Mapping
From all the above decisions you need to provide following details in Interface determination screen
1.Source System
2.Outbound Interface
3.Receiver System
4.Inbound Interface(IDOC type)
5.Message Mapping(i.e file to IDOC)
Even in Interface determination you can specify the condition to select Inbound Interfaces(ex.IDOCs)
if you have any doubts please lets know.
Cheers,
Jag

Extended Receiver Determinatipon and Interface Determination?

Hi,
Where exactly (In which business cases) we can implement or required Extended Receiver Determination and Interface Determination?
Thanks,
Naidu.

Hi,
There are only two modes standard and Extended, Enhanced receiver determinatrion is Extended receiver determination only.
Enhanced(Extended) receiver determination -->
Whenever list of receivers is determined dynamically at runtime, using a message mapping then it is called enhanced.
Enhanced Interface Determination--> It is when you want the target interfaces to be defined dynamically based on the multimapping, that is called enhanced interface determination.
Refre SAP help for more detail
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thanks!
Edited by: Sudhir Tiwari on Dec 5, 2008 6:34 AM

Receiver Determination and Interface Determination Condition conflict in ICO

Hi,
I found a strange issue today while configuring two receivers using the Receiver and Interface Determination conditions.
Sender - Proxy Service
Receiver1 - ReceiverA
Receiver2 - ReceiverB
Receiver Determination Condition : When Field1 = 100, message should flow to ReceiverA and ReceiverB
Interface Determination Condition (ReceiverA) : When Field1=100 and Field2=50 message should flow to a specific interface in ReceiverA
There is no Interface Determination condition for ReceiverB, for all messages having Field1=100, it should go to ReceiverB.
Test Scenarios:
1) Field1=100, Field2=50 : Message flows successfully to ReceiverA and ReceiverB
2) Field1=100, Field2=89 : Message fails to process from ECC itself throwing Interface Determination not found error. Ideally this is a positive scenario for ReceiverB and it should send the message to ReceiverB without any errors. But, this did not happen in this case
I tried the same by configuring the conditions completely in Receiver Determination itself without using the Interface Determination, it worked perfectly fine. But, just wanted to understand that if this is an expected behavior.

Hi Sherin,
As there are two receivers Receiver A and Receiver B.You need to create two bussiness components and two communcication channels for two receivers and one Reciver Determination, two Interface Determination,two Receiver Agreement.In Receiver Determination you need to keep the below and condition.
In the above screenshot the two receiver are Receiver B and Receiver C and Field 1 is Key_Value and Field2 is Emp_ID.
If the Key_Value=100 and Emp_ID =22 then the message should go to both the receivers B & C by keeping the following AND condition
If the Key_Value=100 and Emp_ID is not equal to 22 then the message should go only to Receiver B by keeping the following condition
You need not keep any condition in Interface Determination just create 2 Interface determination for two receivers.
Hope this helps you.
Thanks,
Durga.

Receiver Agreement and Interface determination

Hi
I have an input file that generates two output files. The two output files go to the same interface. One output file will have header and the other will have details. I want to kow how many receiver determination, interface determination, sender agreement and receiver agreements we need to create
Regards

Hi Ajith,
As perception, I understand that you would like to like to split the input file into two as Header and Details. For this requirement, you should need Integration Directory (Configuration) as below:
1. Need to Two Receiver agreements.
2. One Receiver determination.
3. One sender agreement.
4. One Interface determination ( Type: Enhanced)
Thanks,

Receiver determination Vs Interface determination

Hi Experts,
What is the difference between Receiver determination and Interface determination?
In both the case we specify sender -> outbound interface -> Receiver Service -> Interface mapping
Can't we use only interface mapping? Why SAP is providing these two determinations?
Thanks
Gopal

Hi,
><i>In both the case we specify sender -> outbound interface -> Receiver Service - Interface mapping</i>
In receiver determination you only mention the Sender Service, Sender Interface and Reciever Service. You do not mention the Inbound Interafce and interface mapping. You do this in the Interface Determination.
The split between Receiver Determination and Interfacedetermiantion is so that you can add send the same message to Multiple Receivers and then fior each of the receivers , if needed you can add multiple Inbound Interafces / mappings!!
And you can add multiple conditions as well!! makes sense to me!
regards
Bhavesh

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Receiver and Interface determination

Hi,
My senario is File to IDOC and mail.
The condition here is the count of Idoc generated has to be sent as a mail and the mail has to be sent only after the IDoc has been generated successfully.
So i am using two receiver services one is for IDOC and other is for mail and in one receiver determination I am refering TWO reciver Service without any condition.
now i have to use only one interface determination to maintain the order at runtime. so that the interface mapping for mail will be triggered only after the Idoc interfacemapping is successfull.
but in receiver agreement i am not able to refer the Receiver channel for Mail. because the receiver service is still poiting to the Idoc Serveice.
Plz advice.

Hi!
I think the above requirement will also work by using a simple BPM. just try with below steps.
Steps in BPM::
1. Receive step to receive File from a third party by using File Sender CC.
2. SEND ASYNCH step to send IDOC generated Structure data.
3. Before going to next step please find any constant value which will be coming into IDOC from file that
    means for example if your IDOC cotnains any field like ORDER_Generated_By or
    GENERATED_BY:: AMAR name is same in all the data that is coming into IDOC remember that Field
    Name name and insert it in the swtich statement condition editor.
4. Now Insert Switch Condition with 2 branches A & B,
     a) Branch A contains control statement and this branch executes only if the condition statisfies with
        If that IDOC Field lets say name XXXX is equal to constant value AMAR then raise/throws an alert
        mail by uising Control Step.
    b) In Branch B also you ill be including Control Step but this control Step will says that MAIL
        INDICATION No IDOC is generated by using another control step.
5) Remaining all other configurations like 2 receiver agreements and every thing aare same.
6) But you need to confgure ALert configuration settings okay.
You can also achive this by using without BPM.::
In ID part:: you need to enter a condition in Receiver Determination with two receiver business systems and that condition will be once the IDOC field like XXXXX(generated_by is equal to some constant like AMAR ) then it needs to active the Mail Business System.
but this would be little but confusion and but u can achive the above requirement by using simple BPM.
Note:: Only diadvantage will be some performance issue will come if goes through BPM but it works
          very 100 systamatic way because you can review where exactly your Scenario strucks and also
          u can check whether your IDOC generated or not whether mail sent or not in the BPM WORK
           FLOW in the BUSINESS PROCESS ENGINE.
Regards::
Amar Srinivas Eli

Receiver determination(or Interface determination) and conditional routing

I have a flat file to flat file scenario. Based on the input file content, I want to route data to the receiver.
My source flat file contains several IDOC details. Assume two fields FIELD1 and FIELD2 in different segments of the IDOC. My requirement is if FIELD1 of an IDOC = "US" and FIELD2 of the same IDOC = "CA", then that IDOC's details needs to be passed to the receiver.
I have implemented the above condition at interface determination.
But the problem is:
Assume there are 3 idocs in the input file.
FIELD1 of IDOC[1] = 'US' and FIELD2 of IDOC[1] = 'GL'
FIELD1 of IDOC[2] = 'UK' and FIELD2 of IDOC[2] = 'EN'
FIELD1 of IDOC[3] = 'BR' and FIELD2 of IDOC[3] = 'CA' .
Now none of the IDOCs in the input satisfy my requirement and hence the message mapping should not be called at all. But in my case its failing because FIELD1 of IDOC[1] and FIELD2 of IDOC[3] together are satisfying the condition and hence the message mapping is called.
But I need to check this condition IDOCwise. Both the conditions to be satisfies in the same IDOC.
I am thinking that contexts are not being taken care.. It just see the whole file together and not IDOCwise.
Can someone help me on the same. Please let me know if more information is required.
Thanks,
Shobha

>
Shobha HB wrote:
> I have a flat file to flat file scenario. Based on the input file content, I want to route data to the receiver.
>
> My source flat file contains several IDOC details. Assume two fields FIELD1 and FIELD2 in different segments of the IDOC. My requirement is if FIELD1 of an IDOC = "US" and FIELD2 of the same IDOC = "CA", then that IDOC's details needs to be passed to the receiver.
>
> I have implemented the above condition at interface determination.
>
> But the problem is:
> Assume there are 3 idocs in the input file.
> FIELD1 of IDOC[1] = 'US' and FIELD2 of IDOC[1] = 'GL'
> FIELD1 of IDOC[2] = 'UK' and FIELD2 of IDOC[2] = 'EN'
> FIELD1 of IDOC[3] = 'BR' and FIELD2 of IDOC[3] = 'CA' .
>
> Now none of the IDOCs in the input satisfy my requirement and hence the message mapping should not be called at all. But in my case its failing because FIELD1 of IDOC[1] and FIELD2 of IDOC[3] together are satisfying the condition and hence the message mapping is called.
>
> But I need to check this condition IDOCwise. Both the conditions to be satisfies in the same IDOC.
>
> I am thinking that contexts are not being taken care.. It just see the whole file together and not IDOCwise.
>
> Can someone help me on the same. Please let me know if more information is required.
>
> Thanks,
> Shobha
The ideal solution to your scenario is to redesign the interface as below;
1. Receive the file.
2. Do a 1: N mapping (this should split your message into multiple Messages)
3. On this message you can do the required check. Now only the required field for the particular IDoc will be part of the check and it will not mix with other Idocs.
Will this do? Else please provide more details

Receiver and Interface Determination, Sender and Receiver Agreement

Hi Experts,
Could you please tell me, what Receiver Determination, Interface Determination, Sender Agreement and Receiver Agreement we have to use for the below blog.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Regards
Sara

Hi Sara,
WS->BP
Receiver Determination: Sender IF, Sender NS, Sender BS determine the BP
Interface Determination: Sender IF, Sender NS, Sender BS determine your start msg IF (abstr IF) and IF mapping
Sender Agreement: SOAP sender channel for that Sender IF, Sender NS, Sender BS
Receiver Agreement: not reqired
BP->DB
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (DB)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not reqired
Receiver Agreement: JDBC receiver channel for that Inbound IF, NS and 3rd party BS
BP->File
Receiver Determination: BP IF (abstr), BP IF NS, BP determine the 3rd party BS (File)
Interface Determination: BP IF (abstr), BP IF NS, BP determine Inbound-IF and IF mapping
Sender Agreement: not required
Receiver Agreement: File receiver channel for that Inbound IF, NS and 3rd party BS
Regards,
Udo

I need to create a playlist and don't want the same songs in my everyday playlist.

I'm new to Mac and Need to create a playlist on my itunes like a holiday playlist which I have, but I don't want the same music in my everyday playlist. How do I do this. I thought I did my draging the music to that playlist but they are still showing up and playing in my playlist. thanks for the help

Yes yes indeed,
OMG,
I finally got it off,
I called IT Support
and this guy saw where it had doubled the size during the encryption, and showed me how to go in and delete,
and I was able to finally turn it off,
although it took 3 hours to do so.
but worth it.
so never will I again listen to anyone about that,
I'm done with the encryption of my machine.
I wasted a trip going to the Apple Store,
thank you.

Are JDev autogenerated paths needed to create ear, war and jar files ?

Hi
We want to create ear, war and jar files from Ant build script generated from JDeveloper 11.1.1.7.
We also like to use ojdeploy with it.
In the process of creating build.xml files from projects, we see these paths.
We also have standalone Weblogic installed with ADF runtime 11.1.1.7
Questions:
1- Do we need these path ids to generate ear, jar, war files properly and then deploy the ear to our standalone Weblogic so that our webapp can run ok ?
2- Why are they generated, if they are not needed
From research, it appears that we don't need these paths except to keep ant targets of init, compile, exec etc with ojdeploy.
3- Is that true ?
We are afraid that because no paths are listed in the build.xml, then when we deploy the ear app, it cant use the ADF runtime on the standalone WLS.
Thanks in advance for answering.
Sincerely
eg of paths generated below:
<path id="library.SOA.Designtime"/>
<path id="library.SOA.Runtime"/>
<path id="library.BPEL.Runtime"/>
<path id="library.Mediator.Runtime"/>
<path id="library.MDS.Runtime">
    <pathelement location="{oracle.middleware}/oracle_common/modules/oracle.mds_11.1.1/mdsrt.jar"/>
</path>
<path id="library.BC4J.Service.Runtime">
    <pathelement location="{oracle.middleware}/oracle_common/modules/oracle.adf.model_11.1.1/adfbcsvc.jar"/>
    <pathelement location="{oracle.middleware}/oracle_common/modules/oracle.adf.model_11.1.1/adfbcsvc-share.jar"/>
    <pathelement location="{oracle.middleware}/oracle_common/modules/commonj.sdo_2.1.0.jar"/>
    <pathelement location="{oracle.middleware}/modules/org.eclipse.persistence_1.1.0.0_2-1.jar"/>
    <pathelement location="{oracle.middleware}/oracle_common/modules/oracle.webservices_11.1.1/wsclient.jar"/>
    <pathelement location="{oracle.middleware}/oracle_common/modules/oracle.web-common_11.1.1.jar"/>
</path>
<path id="library.TopLink">
    <pathelement location="{oracle.middleware}/modules/com.oracle.toplink_1.0.0.0_11-1-1-5-0.jar"/>
    <pathelement location="{oracle.middleware}/modules/org.eclipse.persistence_1.1.0.0_2-1.jar"/>
    <pathelement location="{oracle.middleware}/modules/com.bea.core.antlr.runtime_2.7.7.jar"/>
    <pathelement location="{oracle.middleware}/modules/javax.persistence_1.0.0.0_2-0-0.jar"/>
</path>
<path id="library.Oracle.Rules"/>
<path id="classpath">
    <path refid="library.SOA.Designtime"/>
    <path refid="library.SOA.Runtime"/>
    <path refid="library.BPEL.Runtime"/>
    <path refid="library.Mediator.Runtime"/>
    <path refid="library.MDS.Runtime"/>
    <path refid="library.BC4J.Service.Runtime"/>
    <path refid="library.TopLink"/>
    <path refid="library.Oracle.Rules"/>
</path>

There are two different things here. Using ant to build the class files and then building an ear from the class files and other resources.
The building part needs the libraries if you use javac as compiler. Building an ear file only needs the path to the jar files which are packed into the ear.
In this sense you need the pages you see in the build.xml.
Then Jdev offers another way: ojdeploy. This tool is a Jdev without a gui.
You can use this tool and build the classes for each project of a workspace and to build build war and ear file. This is just like you click the rebuild button for each project and then the deploy the projects and application. If you use this approach you don't need the generated path ids as the whole build process is done inside Jdev as it's done on your developer pc.
Timo

Urgent help needed in creating customer ship_to and bill_to site id

Hi,
I am using an api to create customer ship_to and bill_to address, in Oracle OM R12 but the api does not return values. I am including the code so any suggestion will be helpful.
declare
l_num_billing_site_use NUMBER;
l_num_cust_site_id NUMBER;
l_rec_cust_site_use apps.Hz_Cust_Account_Site_V2pub.CUST_SITE_USE_REC_TYPE;
l_rec_customer_profile apps.Hz_Customer_Profile_V2pub.CUSTOMER_PROFILE_REC_TYPE;
l_chr_retcode VARCHAR2(20);
l_chr_errbuf VARCHAR2(200);
l_num_count NUMBER;
begin
-- fnd_global.apps_initialize (1885, 21623, 660); -- user id, --resp_id (OM Super User), appl_id
-- mo_global.init ('AR');
-- mo_global.set_policy_context ('S', 511);
l_rec_cust_site_use.site_use_code := 'BILL_TO';
l_rec_cust_site_use.cust_acct_site_id := 24919;
l_rec_cust_site_use.primary_flag := 'N';
l_rec_cust_site_use.created_by_module := 'CONVERSION'; -- Change
BEGIN
apps.Hz_Cust_Account_Site_V2pub.create_cust_site_use( p_init_msg_list => FND_API.G_FALSE
, p_cust_site_use_rec => l_rec_cust_site_use
, p_customer_profile_rec => NULL --l_rec_customer_profile
, p_create_profile => FND_API.G_FALSE
, p_create_profile_amt => FND_API.G_FALSE
, x_site_use_id => l_num_billing_site_use
, x_return_status => l_chr_retcode
, x_msg_count => l_num_count
, x_msg_data => l_chr_errbuf);
EXCEPTION
WHEN OTHERS THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,' Unexpected error creating customer site for Cust Site Id ' || l_num_cust_site_id || ' due to: ' || SQLERRM);
END;
dbms_output.put_line('cust_site_use:'||l_num_billing_site_use);
end;
Thanks,
Srinivas
Edited by: user2138419 on Feb 14, 2010 4:46 PM

It might be a crossdomain.xml problem.
Please make sure that the server hosting the xml allows the domain where the swf is hosted.
You can start with:
<?xml version="1.0" encoding="utf-8" ?>
<cross-domain-policy>
<allow-access-from domain="*"/>
<site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Help Needed in Creating Java Class and Java Stored Procedures

Hi,
Can anyone tell how can i create Java Class, Java Source and Java Resource in Oracle Database.
I have seen the Documents. But i couldn't able to understand it correctly.
I will be helpful when i get some Examples for creating a Java Class, Java Source and Stored Procedures with Java with details.
Is that possible to Create a Java class in the oracle Database itself ?.
Where are the files located for the existing Java Class ?..
Help Needed Please.
Thanks,
Murali.v

Hi Murali,
Heres a thread which discussed uploading java source file instead of runnable code on to the database, which might be helpful :
Configure deployment to a database to upload the java file instead of class
The files for the java class you created in JDev project is located in the myworks folder in jdev, eg, <jdev_home>\jdev\mywork\Application1\Project1\src\project1
Hope this helps,
Sunil..

Need of creating receiver determination and interface determination

Similar Messages

Maybe you are looking for